ImageUltra Builder 5 - Can't get new computers to connect to repository

Greetings.  I've recently (finally) upgraded from IUB 3 to IUB 5 and while our older PC's connect to the upgraded repository and image just fine, I can't get newer PC's to even grab an IP in the WinPE environment after booting off a disc (for network distribution).
I know this is because I need to figure out how to get the latest NIC drivers (for like a T520) into the repository for IUB 5, but I've followed the instructions in the manual for it and no matter what I try I cannot get them loaded properly.
I found another post in these forums that appeared to address this, but after following the (somewhat muddy) instructions there I still cannot get it working.
So far I'm placing all my drivers for the T520 etc. into \repositoryshare\drvs_7pe\drivers\preboot\drivers AND \repositoryshare\drvs_7pe\wim\drivers\windows\system32.
Note that these drivers worked just great on my IUB 3 boot discs.  So I guess I don't have the \repositoryshare\... folder structure setup correctly (?)
Thanks for the help in advance!

kimnarakasa wrote:
same problem when i install this wireless router. Im doing it for 2 days. Sometimes its successful but when I am browsing I see my browser disconnected intermitently. Cisco must do something about this. Because its really annoying
Make sure firmware is updated to the latest version. You can download it here http://homesupport.cisco.com/en-us/support/routers/WRT120N.  Just reset and reconfigure the router. That should fix it.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

Similar Messages

  • Can't get new WRT120N to connect

    Hi.  I just bought a WRT120N to set up with my new Gateway Windows 7 64-bit using Cablevision cable internet.  When I go through the steps from the CD to install, the wizard does not find the connection.  When the internet is plugged directly into the computer, it works fine.  If I have the router plugged in first and then run the install CD, it picks up the router as an existing router but I can't get it to install.   Anyone have any suggestions?
    Thanks.

    kimnarakasa wrote:
    same problem when i install this wireless router. Im doing it for 2 days. Sometimes its successful but when I am browsing I see my browser disconnected intermitently. Cisco must do something about this. Because its really annoying
    Make sure firmware is updated to the latest version. You can download it here http://homesupport.cisco.com/en-us/support/routers/WRT120N.  Just reset and reconfigure the router. That should fix it.
    * Setting up a Linksys router for DSL Internet connection
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
    * Setting up a Linksys router with Cable Internet service
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

  • How can I get Windows computers to connect to iPhone Personal Hotspot?

    I've had two different Windows laptops connect for a short while but once it loses the connection, I can't get it back.

    Hi
    Try
    Right click My Compute / Select - Manage / Select - Services and Applications / Double Click - Services.
    You should see in this list your mobile device which maybe name "Apple Mobile Device" or "iPhone Mobile Device".
    See what it says in "Status" column. If there is nothing in it, right click on it and click "Restart"
    Open iTunes and it should be recognised
    If the status shows as "Started" come back and we'll try something else
    Thanks

  • I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

    i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
    thanks
    john

    Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
    tt2

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    You can find them at vendors like ifixit and instructions to install.
    http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011

  • Can't get new photos added to existing iPhoto albums to sync with iPhone

    I tried talking about this in the iTunes area, but there was no response:
    https://discussions.apple.com/message/20660036#20660036
    I thought I'd drop by the iPhone discussion area next.
    The problem in a nutshell is that I can't get new photos added to iPhoto albums to sync with my iPhone 5. I can even unselect the albums, sync, see the albums deleted on the iPhone, select the albums again, sync, see the albums recreated - but the recreated albums don't include the photos I added yesterday.
    I don't know if this is an iTunes 11 bug, an iPhoto bug or an iPhone bug.
    Any suggestions?
    Thanks,
    doug

    Yes, but which album will be empty?
    Anyway, as soon as I saw how creating albums locally on the iPhone actually worked I said to myself, "This is not reasonable" and as much as I dislike iPhoto decided to keep doing it there until that feature is improved.
    It seems like an obvious thing to improve. Then the albums can sync between the iPhone, iPhoto and other iOS devices more like "it just works" (which it doesn't do now).
    doug

  • Can't get NEW black ink cartridge to work in 5515 HP all-in-one-printer

    Can't get NEW black ink cartridge to work in printer..help

    Hi caralu,
    I was just wondering if you were able to try banhien's recommendation? Please let me know the outcome.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have windows xp and I can't get new version of itunes to install, help???

    I have Windows XP and I can't get new version of itunes to install on my computer, please help??????

    I keep getting the same error message about a program in the installer not finishing as expected.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • TS3212 can't get new versions of itunes to install on my windows computer. Any Suggestions?

    I can't get new versions of itunes to install on my windows computer. Any Suggestions? Every time I try, it downloads OK but when it proceeds to the install, I keep getting the same error message about a program in the installer not finishing as expected.  It quits the install and that's that.  Very frustrating.

    I keep getting the same error message about a program in the installer not finishing as expected.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I can't get 'new message' in imail....any ideas?

    I can't get 'new message' in imail....any ideas?

    Step 1: Turn on the computer
    Step 2: Do you have an Internet connection? To test this, go to your applications and in the utilities folder double click on Network Utility. Go to the ping section and type in www.Google.com. If you can get there then you have Internet. Make sure your DNS servers are correct for the network you are on. If you are using a static IP try using DHCP and get an IP address and check then.
    Step 3:Are you at home or school? If you are at school, they might have the mail app blocked. I know that at my college, I am unable to get my mail on the Apple Mail app.
    Step 4: Are your connections configured correctly on the mail app. If you are using gmail, the settings will be automatically configured. If you have your own e-mail address you are adding for your work then you will have to consult your IT department and get the correct settings.
    Step 4: Do you have an antivirus software that is blocking any Internet connection for the app. Yes I said antivirus and mac in the same sentence. MAC GETS VIRUSES TOO! Go into the firewall configuration and unblock the mail app.

  • I just got new apple headphones and the earpiece came off, how can I get new ones?

    I read that the 5s and what's included in the box when you get it comes with a 1 year warranty and I take care of my earphones so I don't know why the earpiece just broke off. Would I need to buy new ones or can I get new ones from apple since the year warranty isn't up yet?

    Bring them to Apple and find out.  The Genius will examine them.  Only the Genius can determine if the headphone broke from manufacturer defect or from user abuse.

  • HP Laserjet P1006 Can not get new print cartridge into printer.

    HP Laserjet P1006 Can not get new print cartridge into printer. Received two new cartridges from HP. CB435A, 35A are correct numbers for replacement but round part on left side appears too large for channel provided. I can not get the old cartridge back into the printer either. What am I doing wrong.

    Hi,
    Please use the following instructions to fix:
       http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    For MAC filter, you have to logon to the router to see.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

    Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

    Is there a case on the iphone?
    If so, then remove it and see if that solves it.
    Otherwise, make an appointment at the genius bar.

  • I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

    I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

    POP: yahoo, aol, comcast/time warnder/road runner
    Imap: google, hotmail, and more including icloud.
    If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically  Icloud or Hotmail would be my choices right now.
    To find out more about what happens to you, search on Google "difference between pop and imap"

Maybe you are looking for

  • Still frame during video stutters!!!

    I have some footage that runs 3 mins, during the footage I need it to go to a still frame at the nd of the action on screen and hold, like the end of old 70's tv episode like dukes of hazzard!!!! When i create it it looks fine in FCPHD but when i cre

  • Mac Mini (first models)

    We just received as a gift a Mac Mini that was bought in March 2005 but had never been used. It is a model #M9687LL/A (came with Panther on it). Apple.com does not have specifications for this model on their site (model #M9687LL/B is available there)

  • Auto-install updates, with no user interaction?

    Due to problems with malware, we can't really trust everyone to be logged on with administrator privileges all the time as it used to be with Windows 2000 and XP. Consequently the installed software can not be modified by staff anymore. This doesn't

  • File.seperator fails accessing jar resource

    my code is like this: URL myURL = getClass().getResource("image" + System.getProperty("file.seperator") + imageName); It works perfectly when i run from my IDE. But when i package this into a JAR file, it fails with NullPointerException (it cant find

  • CHARM Reporting

    Hi All, I want to have a CHARM Report which contains below details:- Transaction ID Requester Name Change Manager name Transport No. Date on which TR imported in Quality/Production server. I tried several combination's with TC  /n/TMWFLOW/REPORTING a