Imagex.exe

Where can I find this file to download....trying to restore from backup done previously in Windows 7 ultimate

Hi,
ImageX.exe is included in the Windows® Automated Installation Kit (Windows AIK). The Windows AIK is a set of tools and documentation that support
the configuration and deployment of Windows® operating systems. Microsoft has released the Windows AIK image disk download link below:
http://www.microsoft.com/downloads/details.aspx?familyid=696DD665-9F76-4177-A811-39C26D3B3B34&displaylang=en
You may burn it to a disk or open it with a virtual disk and copy the ImageX.exe tool out.
Regards,
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

    Hello,
    I was able to reproduce the following problem on a T400.
    - unattended installation of WXP-SP3 (slipstreamed)
    - reboot
    - install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
    - reboot
    At this point, the video driver is well configured.
    - Reboot once or twice, video driver still good.
    - Boot the T400 on WinPE 2.0
    - Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
    - Shutdown the T400, and reboot on C:\
    - At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
    Then I get an ATI error telling the driver is missing or not well installed.
    - When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
    (without re-installing the driver ...)
    Anyone has an explanation ?
    Please not I did not run "sysprep.exe" before capturing with ImageX.exe
    stefan

    Update on this problem.
    After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
    After rebooting the T400, the ATI driver was fine.
    Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
    I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
    Stefan

  • Satellite L300D - recovery error BSOD+imagex.exe application error

    Hi,
    My Laptop lost function a while ago due to some unknown errors. I managed to get most of the data out through safemode and have transfered them to my desktop.
    The problem I am having now is repairing my laptop. I have since lost my receipt and therefore unable to claim warranty; but I figured I could restore my computer to its factory state with the recovery disk I created. The original problem and the one I am facing can be seen here...-> http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153146#153146 <-
    As you can see from that thread, the recovery disk didn't work. So based on the advice I received I went to a Toshiba authorised computer repairs centre today and they replaced my Hard Disk Drive with a Fujitsu SATA 120GB. I then attempted to use the recovery disk but ran into a few hiccups. 1) A BSOD comes up randomly during the restoration i.e. During image copying it would pop up... sometimes it would pop up when it is finalising the recovery. 2) Sometimes, the BSOD will be bipassed and instead, an error would come up at 3% of installation finalising saying that img could not be copied from HDD to C/:! 3)Sometimes an image.exe application error would come up saying 'The instruction at 0x77c45a20 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the programme.'
    NOTE: None of the these problems occur in the same recovery trial. But they DO come up randomly and when they do, I have to restart the computer and try again.
    My question is this. Since the last piece of advice was to replace my faulty HDD, and I have done so, why am I still unable to repair my computer? And if it is not the matter of HDD, then what is the problem here? I am desperate in fixing my laptop as it is meant to be my 14 year old desktop replacement. Thank you all for your kind attention; I only hope that there is someone out there who has faced and overcome such a problem before.

    Hi!
    Its not easy to say what the reason is for this. It could be a faulty RAM, mainboard or maybe the HDD again. So it could be bad luck that the new HDD is also faulty
    I think you should test something on your notebook with special diagnostic tools.
    http://www.hitachigst.com/hdd/support/download.htm#DFT
    With the Drive Fitness Test you can test your HDD. Download the CD image, burn it on a CD and boot from it. Then you can test the HDD.
    On the same website is a user guide if you want to know more.
    http://memtest86.com/
    Memtest86 is a diagnostic tool to check the RAM. There you can also download a CD image.
    Its easy to use. Run the test 3-4 hours and then you will see if the RAM has some errors.
    After this post your result. Maybe one the tests can find an error.
    If not you should try it with a Microsoft installation disk. Maybe the recovery disk is scratchy or so
    In you cant find something you should go to the ASP again. Speak with the technicians and explain the situation. I think they will try to help you as fast as possible.
    Bye

  • Error applying an image using imagex

    Hello,
    I get the following error messages only when applying image to a destination computer. If I reapply the image on the source computer I do not get these errors, please help.
    F:\>imagex /apply I:\x201win7x64.wim 1 W: /verify
    ImageX Tool for Windows
    Copyright (C) Microsoft Corp. All rights reserved.
    Version: 6.1.7600.16385
    [   0% ] Applying (with verification) progress
    [   0% ] Applying (with verification) progress
    [   1% ] Applying (with verification) progress
    [ ERROR ] W:\MSOCache\All Users\{90120000-0011-0000-0000-0000000FF1CE}-C\ProPlsWW.cab (Error = 577)
    Error restoring image.
    Windows cannot verify the digital signature for this file. A recent hardware or
    software change might have installed a file that is signed incorrectly or
    damaged, or that might be malicious software from an unknown source.
    I took off the /verify switch from the command to see if there was any difference and I get the following errors.
    F:\>imagex /apply I:\x201win7x64.wim 1 W: 
    ImageX Tool for Windows
    Copyright (C) Microsoft Corp. All rights reserved.
    Version: 6.1.7600.16385
    [   0% ] Applying progress
    [   0% ] Applying progress
    [   1% ] Applying progress
    [   2% ] Applying progress: 29:24 mins remaining
    [   3% ] Applying progress: 27:58 mins remaining
    [   4% ] Applying progress: 25:01 mins remaining
    [   5% ] Applying progress: 22:23 mins remaining
    [   6% ] Applying progress: 19:50 mins remaining
    [   7% ] Applying progress: 17:46 mins remaining
    [   8% ] Applying progress: 16:06 mins remaining
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ RETRY ] Restoring W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api again (Error = 1392)
    [ ERROR ] W:\Program Files (x86)\Adobe\Reader 10.0\Reader\plug_ins\Annots.api (Error = 1392)
    Error restoring image.
    The file or directory is corrupted and unreadable.
    I captured the image using /check / verify switches and returned successful image capture with no errors.
    Please help!

    I'm going to try and bring this thread back from the dead.  Buckle up, long post ahead.
    Did you ever determine for sure that the issue was a system board?  I'm having a very similar issue with a machine. 
    I am trying to apply an image to a customer machine using ImageX, but keep running into error 1392.  This error would flag a different file every time, but always at 45-49% completion. 
    The image was provided by the customer in a PE image which was ghosted to multiple flash drives.  We have successfully applied the image to over 400 machines by first using disk part to clean the disk and create one ntfs partition.  We then run "Imagex.exe
    /apply path_to_customer_image.wim 1 C:"
    That is where this machine would find its hangup and spit out an imagex error 1392.
    My initial reaction was to replace the HDD, so I did.  The issue was not resolved, so I tested the ram and CPU with no change.  I replaced the system board with a brand new one, and the issue persists!!  This is basically a new machine by now,
    so I've pretty much ruled out hardware related possibilities.
    Curious as to the customer's specification on creating just one partition in preparation for imaging, I experimented a little.  I shredded the HDD in Parted Magic and used its partition editor to ensure there were no existing partitions.
    Using Disk Part from X: on the imaging flash drive, I cleaned the HDD (why not?) and created an initial ntfs partition of 100mb.  I labeled it "system" and assigned it letter S.  I then created a second ntfs partition of the remaining space,
    labeled it "windows," and assigned it letter C.  This partition I marked as active.
    I then ran chkdsk to scan for any possible drive errors. 
    This time, running Imagex, the process made it to 77% before failing with error 1392 (again, a seemingly random file).  Seeing as how the failures were previously consistently between 45% and 49%, I figured I was on to something.  I repeated all of
    the disk prep steps above, making the "system" partition 500mb this time. 
    ImageX was a success!!  100% of the WIM was applied and I received no errors.  Fantastic. 
    I went to boot the machine and received an error that the boot files were missing.
    I booted back into the PE drive and tried running bcdboot to pull boot files and apply to my active OS partition at C:, but I received another error stating that there was a failure attempting to transfer the boot files.  I ran again in verbose and received
    an error code.  I cannot remember the error code for certain (I am currently cleaning the HDD), but according to my Google history, it was 0xc1. 
    Any ideas??  The machine is an HP EliteBook 8470p.
    Update:  Parted Magic just crashed twice attempting to wipe the hard disk.  Once running from RAM, the second time running live from the USB.  This is new....

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • Unable to capture image using MDT 2012

    After running my Sysprep and Capture task using MDT 2012, MDT begins to capture the image and makes it all the way to ~94% and then stops and returns several errors. Any idea as to what may be causing this? Below are the errors returned during the capture
    task and the ZTIBackup.log:
    Error creating an image of drive C:, re=2
    ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Create WIM.
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The execution of the group (capture Image) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Create WIM. Execution of task sequence failed.
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
    ZTIBackup.log:
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context=""
    type="1" thread="" file="ZTIBackup">
    <![LOG[OriginalPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup"
    context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Search for Drive: OriginalPartitionIdentifier  SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014"
    component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Found Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDisk is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[BackupDrive not specified searching for backup drive]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[BackupDrive defaulting to Destination Logical Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Checking to see if we can store the backup locally]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive C: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Local store path = C:\StateStore]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Total used space: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Available space at C:\StateStore: 132373320]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Local store not permitted]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Network store path set to blank]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Network store path set to: \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Backup file name already set to: CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Using the backup path: \\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Validating connection to \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Already connected to server OCS-MDT as that is where this script is running from.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[Beginning backup of drive C:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[About to run command: "\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe"  /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE]LOG]!><time="14:01:13.000+000"
    date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Command has been started (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Files/folders excluded from image capture by default:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~bt]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~ls]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \winpepge.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Windows\CSC]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycled]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycler]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$Recycle.Bin\*]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \System Volume Information]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \pagefile.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \hiberfil.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Turning on VERIFY option for network share]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Scanning files and directories...]LOG]!><time="14:01:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   0% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 17 minutes (process ID 1568)]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   1% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   2% ] Capturing progress: 2:22:22 hrs remaining ]LOG]!><time="14:21:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   3% ] Capturing progress: 2:23:19 hrs remaining ]LOG]!><time="14:22:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   4% ] Capturing progress: 2:23:01 hrs remaining ]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 23 minutes (process ID 1568)]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   5% ] Capturing progress: 2:39:46 hrs remaining ]LOG]!><time="14:27:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   6% ] Capturing progress: 2:43:14 hrs remaining ]LOG]!><time="14:28:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   7% ] Capturing progress: 2:43:42 hrs remaining ]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 29 minutes (process ID 1568)]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   8% ] Capturing progress: 2:41:26 hrs remaining ]LOG]!><time="14:32:08.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   9% ] Capturing progress: 2:43:24 hrs remaining ]LOG]!><time="14:34:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  10% ] Capturing progress: 2:41:57 hrs remaining ]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 35 minutes (process ID 1568)]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  11% ] Capturing progress: 2:38:33 hrs remaining ]LOG]!><time="14:37:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  12% ] Capturing progress: 2:35:51 hrs remaining ]LOG]!><time="14:39:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  13% ] Capturing progress: 2:33:30 hrs remaining ]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 40 minutes (process ID 1568)]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  14% ] Capturing progress: 2:30:39 hrs remaining ]LOG]!><time="14:42:28.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  15% ] Capturing progress: 2:28:39 hrs remaining ]LOG]!><time="14:44:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  16% ] Capturing progress: 2:28:06 hrs remaining ]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 45 minutes (process ID 1568)]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  17% ] Capturing progress: 2:30:58 hrs remaining ]LOG]!><time="14:50:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  18% ] Capturing progress: 2:42:16 hrs remaining ]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 56 minutes (process ID 1568)]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  19% ] Capturing progress: 2:55:09 hrs remaining ]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 62 minutes (process ID 1568)]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  20% ] Capturing progress: 3:03:46 hrs remaining ]LOG]!><time="15:07:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  21% ] Capturing progress: 3:10:17 hrs remaining ]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 70 minutes (process ID 1568)]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  22% ] Capturing progress: 3:12:08 hrs remaining ]LOG]!><time="15:13:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  23% ] Capturing progress: 3:11:13 hrs remaining ]LOG]!><time="15:15:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  24% ] Capturing progress: 3:08:56 hrs remaining ]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 76 minutes (process ID 1568)]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  25% ] Capturing progress: 3:06:17 hrs remaining ]LOG]!><time="15:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  26% ] Capturing progress: 3:03:27 hrs remaining ]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 81 minutes (process ID 1568)]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  27% ] Capturing progress: 3:00:07 hrs remaining ]LOG]!><time="15:24:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  28% ] Capturing progress: 2:56:19 hrs remaining ]LOG]!><time="15:25:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  29% ] Capturing progress: 2:54:19 hrs remaining ]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 89 minutes (process ID 1568)]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  30% ] Capturing progress: 2:52:44 hrs remaining ]LOG]!><time="15:32:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  31% ] Capturing progress: 2:50:14 hrs remaining ]LOG]!><time="15:34:29.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  32% ] Capturing progress: 2:47:25 hrs remaining ]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 95 minutes (process ID 1568)]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  33% ] Capturing progress: 2:44:17 hrs remaining ]LOG]!><time="15:38:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  34% ] Capturing progress: 2:40:58 hrs remaining ]LOG]!><time="15:40:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  35% ] Capturing progress: 2:37:40 hrs remaining ]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 101 minutes (process ID 1568)]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  36% ] Capturing progress: 2:34:21 hrs remaining ]LOG]!><time="15:44:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  37% ] Capturing progress: 2:31:09 hrs remaining ]LOG]!><time="15:46:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  38% ] Capturing progress: 2:28:17 hrs remaining ]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 107 minutes (process ID 1568)]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  39% ] Capturing progress: 2:25:45 hrs remaining ]LOG]!><time="15:51:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  40% ] Capturing progress: 2:23:10 hrs remaining ]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 112 minutes (process ID 1568)]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  41% ] Capturing progress: 2:20:18 hrs remaining ]LOG]!><time="15:54:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  42% ] Capturing progress: 2:17:13 hrs remaining ]LOG]!><time="15:56:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  43% ] Capturing progress: 2:14:21 hrs remaining ]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 118 minutes (process ID 1568)]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  44% ] Capturing progress: 2:11:48 hrs remaining ]LOG]!><time="16:01:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  45% ] Capturing progress: 2:09:52 hrs remaining ]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 126 minutes (process ID 1568)]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  46% ] Capturing progress: 2:09:09 hrs remaining ]LOG]!><time="16:10:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  47% ] Capturing progress: 2:08:08 hrs remaining ]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 131 minutes (process ID 1568)]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  48% ] Capturing progress: 2:06:21 hrs remaining ]LOG]!><time="16:15:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  49% ] Capturing progress: 2:04:12 hrs remaining ]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 136 minutes (process ID 1568)]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  50% ] Capturing progress: 2:01:44 hrs remaining ]LOG]!><time="16:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  51% ] Capturing progress: 1:59:26 hrs remaining ]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 141 minutes (process ID 1568)]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  52% ] Capturing progress: 1:57:05 hrs remaining ]LOG]!><time="16:24:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  53% ] Capturing progress: 1:54:22 hrs remaining ]LOG]!><time="16:26:15.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  54% ] Capturing progress: 1:51:34 hrs remaining ]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 147 minutes (process ID 1568)]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  55% ] Capturing progress: 1:48:56 hrs remaining ]LOG]!><time="16:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  56% ] Capturing progress: 1:46:05 hrs remaining ]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 152 minutes (process ID 1568)]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  57% ] Capturing progress: 1:43:42 hrs remaining ]LOG]!><time="16:35:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  58% ] Capturing progress: 1:41:18 hrs remaining ]LOG]!><time="16:37:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  59% ] Capturing progress: 1:38:41 hrs remaining ]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 157 minutes (process ID 1568)]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  60% ] Capturing progress: 1:36:02 hrs remaining ]LOG]!><time="16:40:19.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  61% ] Capturing progress: 1:33:11 hrs remaining ]LOG]!><time="16:41:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  62% ] Capturing progress: 1:30:13 hrs remaining ]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 162 minutes (process ID 1568)]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  63% ] Capturing progress: 1:27:20 hrs remaining ]LOG]!><time="16:46:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  64% ] Capturing progress: 1:24:48 hrs remaining ]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 168 minutes (process ID 1568)]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  65% ] Capturing progress: 1:22:51 hrs remaining ]LOG]!><time="16:51:34.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  66% ] Capturing progress: 1:20:36 hrs remaining ]LOG]!><time="16:52:56.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  67% ] Capturing progress: 1:17:48 hrs remaining ]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 174 minutes (process ID 1568)]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  68% ] Capturing progress: 1:15:29 hrs remaining ]LOG]!><time="16:56:51.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  69% ] Capturing progress: 1:12:55 hrs remaining ]LOG]!><time="16:58:32.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  70% ] Capturing progress: 1:10:29 hrs remaining ]LOG]!><time="16:59:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  71% ] Capturing progress: 1:07:56 hrs remaining ]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 179 minutes (process ID 1568)]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  72% ] Capturing progress: 1:05:07 hrs remaining ]LOG]!><time="17:02:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  73% ] Capturing progress: 1:02:13 hrs remaining ]LOG]!><time="17:04:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  74% ] Capturing progress: 59:21 mins remaining ]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 186 minutes (process ID 1568)]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  75% ] Capturing progress: 57:19 mins remaining ]LOG]!><time="17:08:59.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  76% ] Capturing progress: 54:21 mins remaining ]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 191 minutes (process ID 1568)]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  77% ] Capturing progress: 52:42 mins remaining ]LOG]!><time="17:14:16.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  78% ] Capturing progress: 50:16 mins remaining ]LOG]!><time="17:16:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  79% ] Capturing progress: 48:22 mins remaining ]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 197 minutes (process ID 1568)]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  80% ] Capturing progress: 46:27 mins remaining ]LOG]!><time="17:18:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  81% ] Capturing progress: 44:11 mins remaining ]LOG]!><time="17:19:20.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  82% ] Capturing progress: 41:31 mins remaining ]LOG]!><time="17:20:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  83% ] Capturing progress: 38:07 mins remaining ]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 202 minutes (process ID 1568)]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  84% ] Capturing progress: 35:48 mins remaining ]LOG]!><time="17:26:06.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  85% ] Capturing progress: 33:25 mins remaining ]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 207 minutes (process ID 1568)]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  86% ] Capturing progress: 31:18 mins remaining ]LOG]!><time="17:30:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  87% ] Capturing progress: 29:37 mins remaining ]LOG]!><time="17:31:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  88% ] Capturing progress: 27:55 mins remaining ]LOG]!><time="17:32:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  89% ] Capturing progress: 25:04 mins remaining ]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 213 minutes (process ID 1568)]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  90% ] Capturing progress: 22:52 mins remaining ]LOG]!><time="17:35:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  91% ] Capturing progress: 20:47 mins remaining ]LOG]!><time="17:36:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  92% ] Capturing progress: 18:33 mins remaining ]LOG]!><time="17:37:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  93% ] Capturing progress: 16:14 mins remaining ]LOG]!><time="17:38:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  94% ] Capturing progress: 13:54 mins remaining ]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 218 minutes (process ID 1568)]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 224 minutes (process ID 1568)]LOG]!><time="17:45:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Return code from command = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Error creating an image of drive C:, rc = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    <![LOG[ZTIBackup COMPLETED.  Return Value = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = -1073741819  0xC0000005]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread=""
    file="ZTIBackup">

    Not sure what's going on here. Possibly a corrupt drive? Or the target drive is full?
    Try running the imagex command manually from a F8 cmd window (in WinPE)
    "\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Parallel Processing : Unable to capture return results using RECIEVE

    Hi,
    I am using parallel processing in one of my program and it is working fine but I am not able to collect return results using RECIEVE statement.
    I am using
      CALL FUNCTION <FUNCTION MODULE NAME>
             STARTING NEW TASK TASKNAME DESTINATION IN GROUP DEFAULT_GROUP
             PERFORMING RETURN_INFO ON END OF TASK
    and then in subroutine RETURN_INFO I am using RECEIVE statement.
    My RFC is calling another BAPI and doing explicit commit as well.
    Any pointer will be of great help.
    Regards,
    Deepak Bhalla
    Message was edited by: Deepak Bhalla
    I used the wait command after rfc call and it worked additionally I have used Message switch in Receive statement because RECIEVE statement was returing sy-subrc 2.

    Not sure what's going on here. Possibly a corrupt drive? Or the target drive is full?
    Try running the imagex command manually from a F8 cmd window (in WinPE)
    "\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • System Recovery Kit for dv7-3165dx fails to restore factory image to replacement hd

    I'm posting this wall of text here in case someone else has any suggestions before I contact HP Support to see what options they have.
    My attempt to recover the factory image to a replacement hard drive in an HP Pavilion dv7-3165dx notebook is failing. An error occurs when SM.exe is trying to merge the WIM files. The SSRD.Log shows an error:
    SM, 13, Set reference file fail
    after that, SM.exe displays this message when run from a command line:
    SM, Failure, Can not load imagex 1 from src WIM file
    The following are the symptoms that the Recovery Manager displays on the screen.
    The Recovery Manager reads the two DVDs and after a few seconds, it pops up an error message:
    Reducer
    C:\RM\Image\TempBASE.WIM was not found.
    The message has on "OK" button that when clicked on, closes the message window.
    After that, nothing happens. No disk or DVD activity for over an hour. The mouse moves, but no key presses have any effect, including CTRL-ALT-DEL. You can use the mouse to move the Recovery Manager window around, and there is nothing hidden behind it. Clicking on the Recovery Manager Back, Next, or Cancel buttons produce no response at all.
    The only option at this point is to hold down the power switch until it powers down.
    When the power is turned back on, the hard drive boots and Recovery Manager displays a message that incorrectly claims "Recovery is complete" and has a "Click Finish to restart" button. After clicking on "Finish", it reboots but since the System Recovery did not actually complete, all it does is display:
    BOOTMGR is missing
    Press CTRL+ALT+DEL to restart
    Before attempting the recovery, the notebook passed all diagnostic tests.
    The 2x2GB memory cards, which still have HP stickers on them, were tested with Memtest86+ V5.01 and completed over six passes in over seven hours with zero errors.
    The replacement 500GB HGST Travelstar Z5K500 drive was tested with gsmartcontrol. The SMART status showed no errors in the past with over 400 hours of power-on time. Both of the SMART short self-test and extended self-test tests were run, which it passed without any errors.
    The HP System Diagnostics from the Startup Menu were run on the memory and hard drive and they passed those tests without any errors.
    While waiting for the HP "System Recovery Kit for Consumer Notebook (3 Disks)" Software Part Number 599357-001 to arrive, both Fedora 21 64bit and Windows Vista 64bit were successfully installed on the harddrive.
    Both System Recovery DVDs were read on different machines without any errors. This System Recovery Kit supports the notebook's System Id which is 3638, so they appear to be the correct discs.
    Now a list of workaround attempts that were suggested.
    After the Recovery Manager failed a few times with the same error message, some googling came up with other users mentioning the "TempBASE.WIM was not found" error message. I tried these suggestions that I read about.
    Run KillDisk to fill the HD with zeros.
    Running Recovery Manager after that failed with the same error message.
    Run the CyberLink Recovery Discs Utility (sp44645.exe).
    Running Recovery Manager after that failed with the same error message.
    Installed Windows VISTA 64bit again and upgraded the BIOS from F10 to F13.
    Running Recovery Manager after that failed with the same error message.
    Try only using a single 2GB memory card to see if it was a 64bit problem.
    Running Recovery Manager after that failed with the same error message.
    The BIOS does not have an option to change from AHCI mode to IDE mode.
    I don't have a Windows 7 OEM install disc and am trying to avoid spending $100 to buy one.
    That is when I decided that it is not a PC hardware problem, but a problem with the HP System Recovery Kit. Here are the details of what I think the Kit is doing.
    After running Recovery Manager and getting the error message, instead of just re-booting and letting the "Recovery is complete" message appear, I re-booted with a Linux USB drive and inspected what was on the hard drive.
    fdisk -l shows this:
    Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: dos
    Disk identifier: 0xa5dddc41
    Device Boot Start End Sectors Size Id Type
    /dev/sda1 409600 143013887 142604288 68G 7 HPFS/NTFS/exFAT
    /dev/sda2 * 143013888 143833087 819200 400M c W95 FAT32 (LBA)
    fsarchiver probe shows this:
    [======DISK=] [=============NAME====] [====SIZE==] [MAJ] [MIN]
    [sda                     ] [HGST HTS545050A7                ]  [  465.76 GB] [     8] [     0]
    [=====DEVICE] [==FILESYS==] [=====LABEL=] [====SIZE==] [MAJ] [MIN]
    [sda1                 ] [ntfs                  ] [<unknown>      ] [     68.00 GB] [    8] [     1]
    [sda2                 ] [vfat                  ] [SDV                     ] [  400.00 MB] [   8] [     2]
    Running gparted shows about 200 MB of unallocated space before the sda1 NTFS partition. The rest of the disk is unallocated after the bootable sda2.
    The sda1 NTFS partition has a \SSRD.Log file and an empty \RM\Image directory.
    The sda2 FAT32 partition has the Recovery Manager application files in it:
    /mnt/sda2:
    total 400
    -rwxr-xr-x 1 root root 15 Apr 9 23:36 SDV.FLG
    drwxr-xr-x 4 root root 4096 Apr 9 23:36 SYSTEM.SAV
    drwxr-xr-x 3 root root 4096 Nov 1 2009 BOOT
    drwxr-xr-x 3 root root 4096 Nov 1 2009 EFI
    drwxr-xr-x 2 root root 4096 Nov 1 2009 SOURCES
    drwxr-xr-x 3 root root 4096 Jul 27 2009 TOOL
    -rwxr-xr-x 1 root root 383562 Jul 13 2009 bootmgr
    The SOURCES directory has boot.wim, and the TOOL directory has all the programs, like Reducer.exe and SM.exe, in it.
    After shutting down the Linux system and rebooting, the Recovery Manager then boots from sda2 and displays the "Recovery is complete" message and "Click Finish to restart" button. During this process, it removes the sda2 partition and marks the sda1 NTFS partition as the active bootable partition. When the PC restarts, all that is left is the sda1 NTFS partition with the empty C:\RM\Image directory and the SSRD.Log file, so there is no BOOTMGR to boot with.
    The SSRD.Log file logs the tasks that the Recovery Manager performs.
    The Recovery Manager runs some initialization tasks and then reads the two System Recovery DVDs. It then calls MergeWimFile which runs SM.exe and starts to merge BASE.WIM with the other BASE*.WIM files. SM.exe merges 20 WIM files with log entries like these:
    SM, Success, refName= C:\RM\IMAGE\BASE22.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE23.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE3.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE4.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE5.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE6.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE7.WIM
    Then, with only two WIM files left, BASE8.WIM and BASE9.WIM, the log shows:
    SM, 13, Set reference file fail
    This must be when Recovery Manager pops up the "Reducer C:\RM\Image\TempBASE.WIM was not found" error message.
    That narrowed down the problem.
    I copied all of the WIM files and the TOOLS directory to a Windows 8.1 system. The two DVDs did not have any errors while being read. Running SM.exe from an admin Command Prompt with the same parameters that were logged in the SSRD.Log produced the same error message. There was an additional error message that appeared in the Command Prompt window:
    SM, 13, Set reference file fail
    SM, Failure, Can not load imagex 1 from src WIM file
    and the TempBASE.WIM was not created.
    SM.exe /? did not provide a help message. I could not find any documentation on the SM.exe command.
    If I removed three of the WIM files, (BASE7.WIM BASE8.WIM BASE9.WIM) then SM.exe could create the TempBASE.WIM file, but it would fail while merging index 2 of 3 with this message:
    SM, 11%, Merge index 2 of 3 Processing
    SM, Failed, Export image failed
    The TempBASE.WIM is 3,421,518 KB in size after that.
    This is where I came to a dead end and cannot think of anything else that I can do. Maybe I'm missing something obvious, but it appears to me that there was some kind of error building this System Recovery Kit and it is not able to perform a factory install on this notebook.
    ps
    If I can figure out how to add an attachment, I will add the SSRD.Log file.  If not, then ask and I will post it as a followup.

    Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
    Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
    imagex.exe /info K:\PRELOAD\BASE7.WIM
    ImageX Tool for Windows
    Version: 6.2.9200.16384
    Error opening file [K:\PRELOAD\BASE7.WIM].
    The data is invalid.
    The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
    The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

  • Error While Using MDT 2013 to Refresh Windows XP to Windows 8.1 during Computer backup to network

    Hi,
    I am getting below error in Deployment Summary  while Computer backup to network during Refresh from XP to 8.1 through MDT 2013.
    1. I followed URL-
    http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx to use USMT for the UserProfile through MDT 2013.
    2. For User profile I am using Hardlink USMT through MDT Wizard, that is working fine.
    3. My Deployment Share rule is below..
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=YES
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipComputerBackup=YES
    SkipBitLocker=YES
    DoCapture=YES
    ComputerBackupLocation=NETWORK
    BackupShare=\\MDT2013\share$
    BackupDir=%OSDComputerName%
    BackupFile=%OSDComputerName%.wim
    BackupDrive=ALL
    4. ZTIBAckup Logs below..
      2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context=""
    type="1" thread="" file="ZTIBackup">
    <![LOG[OriginalPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '26213933056' and VolumeName = '' and VolumeSerialNumber = '7413DBF4']LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup"
    context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Search for Drive: OriginalPartitionIdentifier  SELECT * FROM Win32_LogicalDisk WHERE Size = '26213933056' and VolumeName = '' and VolumeSerialNumber = '7413DBF4']LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup"
    context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Found Drive: C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property OSDisk is now = C:]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Checking to see if we can store the backup locally]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive C: 3231300]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive D: 272600]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Drive X: 2489]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Local store path = C:\StateStore]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Total used space: 3506389]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Available space at C:\StateStore: 22368244]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Backup can use local path]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Property USMTLocal is now = True]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Network store path set to:
    \\MDT2013\DeploymentShare$\Tools\X64\imagex.exe"  /capture /compress maximum C: "\\MDT2013\share$\TEST8\TEST8.wim" "001CDrive" /flags EnterpriseN]LOG]!><time="13:16:21.000+000"
    date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Command has been started (process ID 1248)]LOG]!><time="13:16:21.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1248)]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Version: 6.3.9600.16411]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Files/folders excluded from image capture by default:]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~bt]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$windows.~ls]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \winpepge.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Windows\CSC]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycled]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \Recycler]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \$Recycle.Bin\*]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \System Volume Information]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \swapfile.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \pagefile.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console >  \hiberfil.sys]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Turning on VERIFY option for network share]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > Scanning files and directories...]LOG]!><time="13:16:22.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   0% ] Capturing progress ]LOG]!><time="13:16:33.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   1% ] Capturing progress ]LOG]!><time="13:16:33.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [   2% ] Capturing progress: 11:04 mins remaining ]LOG]!><time="13:16:47.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   3% ] Capturing progress: 9:12 mins remaining ]LOG]!><time="13:16:47.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   4% ] Capturing progress: 7:58 mins remaining ]LOG]!><time="13:16:50.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   5% ] Capturing progress: 7:20 mins remaining ]LOG]!><time="13:16:55.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   6% ] Capturing progress: 7:59 mins remaining ]LOG]!><time="13:17:07.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   7% ] Capturing progress: 8:23 mins remaining ]LOG]!><time="13:17:13.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   8% ] Capturing progress: 8:20 mins remaining ]LOG]!><time="13:17:17.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [   9% ] Capturing progress: 8:33 mins remaining ]LOG]!><time="13:17:26.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [  11% ] Capturing progress: 8:21 mins remaining ]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [  13% ] Capturing progress: 7:37 mins remaining ]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > [ RETRY ] Restoring C:\WIMA8B0.tmp again (Error = 1392)]LOG]!><time="13:17:35.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread=""
    file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\StateStore\USMT\File\C$\MININT\SMSOSD\OSDLOGS\BDD.log (Error = 80)]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1"
    thread="" file="ZTIBackup">
    <![LOG[  Console > [ ERROR ] C:\StateStore\USMT\File\C$\MININT\SMSOSD\OSDLOGS\BDD.log (Error = 80)]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1"
    thread="" file="ZTIBackup">
    <![LOG[  Console > Error imaging drive [C:\]]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[  Console > The file exists. ]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Return code from command = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[Error creating an image of drive C:, rc = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    <![LOG[ZTIBackup COMPLETED.  Return Value = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
    <![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2]LOG]!><time="13:17:38.000+000" date="04-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
    5. Computer Backup Dir is accessbaile and permission is ok.
    Any idea to resolve this issue
    Shailendra Dev

    After changing the BackupDrive=D: , I am able to take backup of D drive only , but I want to take all the local drives backup before installing windows 8.1
    please suggest .
    Shailendra Dev

  • MDT2012 - Deployment failed, the system cannot find the file specified

    Hi everybody. 
    First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help. 
    I encounter issues with my MDT 2012 Update 1 platform. 
    I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts. 
    In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:. 
    The script is the following : 
    "%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
    But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error : 
    Litetouch deployment dailed, return code = -214767259 0x80004005
    Failed to run the action: InstallD (ie : the script above)
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The error is on my task which uses imagex to deploy my D and E WIM.
    So I looked to see if the file's path was the good one. 
    And it is !!!
    Wizard says that the file couldn't be find, but the file is existing, and in the good path. 
    For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast. 
    I even encounter this issue if I use my MDT server and my computers on the same switch. 
    Any help would be gratefull, my client gives me the week to resolve the issue. 
    Thanks 

    BDD.LOG
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[------  Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Started.
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"    \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe"  /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
    file="LTIApply">
    <![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
    <![LOG[  Console > [  99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe"  /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Target volumes will be updated with BOOTMGR compatible bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console >     Successfully updated NTFS filesystem bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Bootcode was successfully updated on all targeted volumes.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"    \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr  /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
    file="ztiRunCommandHidden">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr  /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[  Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

  • Issue with recovery disks purchased from HP

    I had a harddrive failure on the HP Pavilion 21-h010. Instead of utilizing the warranty, I decided to purchase a new harddrive and restore disks from HP.
    Initially, I had the error where I was told that the disks could not be used for the system. I found that while the Build ID on the disks ( 14AM1ARA601 ) mostly matched my system ( 14AM1ARA602 ), investigating the restore disk revealed it was looking for a Build ID of ( 14EM1ARA602 ). After changing the Buidl ID in the computer, I was able to kick off the restore process.
    After the 4th disk is used and removed, and the system reboots, it runs through some commands and red screens. I pulled the drive and found an error log with this detail:
    *x:\opktools\imagex.exe /check /export /ref c:\sources\INSTALL*.SWM "c:\sources\INSTALL.SWM" USW864ML-S "c:\sources\BASEIMAGE.WIM" BASE_IMAGE
    ImageX Tool for Windows
    Copyright (C) Microsoft Corp. All rights reserved.
    Version: 6.3.9600.16384
    Exporting: [c:\sources\INSTALL.SWM, USW864ML-S] ->
    [c:\sources\BASEIMAGE.WIM]
    The specified image [USW864ML-S] was not found in [c:\sources\INSTALL.SWM].
    Failed to export the base image!
    Seems to me that the portion of the image is missing or damaged.
    Does anyone have any thoughts?

    @Vincet73 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Is it possible to integrate chkdsk progress into MDT progress bar screen?

    I'm tweaking my custom capture task sequence and want to run chkdsk /F OSdisk after I get a system into WindowsPE environment but before the capture. I'd like to wrap the chkdsk into the MDT window progress bar. Before I jump down a rabbit hole building
    from (say the ZTIBackup.wsf) is there a template ZTI I could use that would wrap the progress bar into the MDT window like this: http://hanssontony.files.wordpress.com/2012/05/mdtrealtimeinfo.jpg

    Yuck
    Could work, oUtility.RunWithConsoleLogging() is designed to auto-process percentages if found in the output stream. *However* not all output streams are created equal. wdsmcast.exe for example outputs a series of Peroid characters to indicate progress (of
    course), so there is custom code in MDT to read the dots and calculate the percentages.
    The output stream should return the percentages per line, rather than overwriting the console. This is similar to the Imagex.exe "/Scroll" command switch.
    I would try to get it working using the RunWithConsoleLogging() command, if it does not work, I would give up.
    Keith Garner - keithga.wordpress.com

  • How to edit WEPOS WIM file?

    Hello, I am trying to edit the Install.WIM file on my wePOS disc, as I need to update some drivers and integrate some folders. However DISM does not recognise the Install.wim file as being valid.
    I have tried installing Windows vista AIK, win7 AIK and windows 8 AIK.
    Please help, thank you.

    A little surprised the latest DISM doesn't recognize a WIM file. Are you using WEPOS or POSReady2009?
    It has been a while since I looked at a WEPOS disk. Do you see a utility called imagex.exe? If have this older utility, try mounting the WIM file for editing using imagex.exe.
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • I need to just capture an image

    I am useing SCCM 2012 R2 for my OSD and I need some help.  I have a computer that has everything I need on it.  When I do a build and capture task it will format the drive and put a exitsing image on it then capture that one.  I need help
    to just capture the image I want.  I know sccm 2012 will install software but, we have software that can't be installed that way.  I have read some posts that say you can use AIK but, I have looked at that and I don't see how.  Any help that
    you can give will be great.

    It is super easy to capture a reference image using Capture media or manually via DISM or Imagex.exe.
    Technet: http://technet.microsoft.com/en-us/library/bb694129.aspx
    Guide for 2007 (still applies to 2012):
    http://blogs.technet.com/b/ptsblog/archive/2011/01/26/capture-a-windows-174-image-from-a-reference-computer-using-capture-media-for-it-pros.aspx
    A few others:
    http://www.windows-noob.com/forums/index.php?/topic/5070-how-can-i-capture-an-image-using-capture-media-in-configmgr-2012/
    http://gerryhampsoncm.blogspot.com/2013/02/sccm-2012-sp1-step-by-step-guide-part.html
    Daniel Ratliff | http://www.PotentEngineer.com

  • Auto calc time for shot duration, fails to change or appears to be in fixed mode.

    Switching back and forth online to offline as you recommended is causing sync issues, additionally, the shot duration set for auto calc defaults back to custom so not certain if times are fixed, correct or not.
    drgm

    Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
    Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
    imagex.exe /info K:\PRELOAD\BASE7.WIM
    ImageX Tool for Windows
    Version: 6.2.9200.16384
    Error opening file [K:\PRELOAD\BASE7.WIM].
    The data is invalid.
    The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
    The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

Maybe you are looking for

  • UPS Set-up Advice. Distance from computer and display?

    I have just purchased the APC BX1500 UPS and wanted some advice on set-up. If is fully charged and ready to go. Is there a recommended safe distance in needs to be away from my Mac Pro. It looks like it needs to be 30cm away from the monitor does tha

  • Multi format disc

    I just upgraded to the current version of dvdsp4 from version 3. My first task is to try to build a disc that runs a script as the FIRST PLAY to determine the region code of the player and navigate to the appropriate content. That's easy enough, but

  • An alternative to a Yahoo Group?

    Does business catalyst have an alternative to a Yahoo group? I think it is called 'many to many'. If not, are there any plans in the future for such? If not, does anybody know of a good alternative? Thanks for your help.

  • How to create artifact and redirect

    HI , I need to implement a use case where there are two Access Manager(7.0) (first named as AM1, other AM2) and an tomcat server. Where AM1 is in some other domain and has trust relationship with AM2. Also AM2 and tomcat are in the same domain. Use c

  • Iso image playing in windows, but not in mac

    torrent site for the iso image is: http://isohunt.com/torrent_details/119383481/ccie?tab=summary#.UGby8mg1FFI it's a cisco network concept tutorial, it is playing on a windows laptop on windows xp, vista or 7. I understand that wmv player cannot be p