Imaging problem

Hi all
I have a "locations" field that is updated at regular
intervals with names from different locations. I wonder if there a
way on mousedown to transfer the contents of this field on a jpeg
image (a map of these locations) that is not part of my cast but in
a folder within the moviepath. Everytime the user clicks mousedown
the new text from the locations field should be passed to the image
(delete and replace the old text with the new one)
To be more specific. Let's assume that the contents of the
locations field is:
locaA1 The text that should be passed on the image is locaA1
When the contents of the locations field is updated (e.g.,)
locaA1
LocaC2 The text that should be passed on the image is
locaA1
locaC2
Any ideas how to do that?

Your field has an image property:
member("someFieldName").image
Using copyPixels you can draw this image onto another imager
(like you map)
Using one of the image export Xtras you can write this to a
file.
You would need to keep a copy of the unaltered map jpeg for
the next
time you wanted to add a location to the map (rather than
trying to
delete the old text).
wgb14 wrote:
> Hi all
>
> I have a "locations" field that is updated at regular
intervals with names
> from different locations. I wonder if there a way on
mousedown to transfer the
> contents of this field on a jpeg image (a map of these
locations) that is not
> part of my cast but in a folder within the moviepath.
Everytime the user clicks
> mousedown the new text from the locations field should
be passed to the image
> (delete and replace the old text with the new one)
>
> To be more specific. Let's assume that the contents of
the locations field is:
>
>
> locaA1 The text that should be passed on the image is
locaA1
>
> When the contents of the locations field is updated
(e.g.,)
>
> locaA1
> LocaC2 The text that should be passed on the image is
>
> locaA1
> locaC2
>
>
> Any ideas how to do that?
>

Similar Messages

Image problem in V4.0

Hi,
Previously I had lots of problems with showing a BLOB image from a table
in a report using the apex_util.get_blob_file_src function.
Varad put me right on several ocassions: see the thread at
Confusion with get_blob_file_src
Eventually everything went well, and I got my images of a specific size on the screen.
In the last month or two, the host database that I rent went up from version ten to version
eleven, and the apex version changed too from 3.2.1 to some version of 4.
I've only now discovered that the images don't display any more. I've re-read the thread
mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
so my current guess is that something has changed when Apex went to its new version.
Can anyone point me in the right direction regarding Image problems in version 4 ?
I guess I'm not the first to experience such issues, and a checklist of things to try would
be most welcome.
I've done a View->Source on the page that doesn't work, and the issue with a missing value
for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
Suggestions welcomed please; thankyou in advance.
Mungo

Hi Folks,
I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
post it here.
I read various other threads and stumbled across:
PDF viewing with apex_util.get_blob_file_src not working with 4.0
PDF viewing with apex_util.get_blob_file_src not working with 4.0 &# 4404695
That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
an "Automated Row PROCESSING" process too.
I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
Automated Row Fetch process and the damn thing worked!
Haven't got a clue why on earth either of these are requirements on a page that is selecting data
from the database - I don't understand where such processes are called in the big scheme of things.
That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
Happy to be corrected on any points.
Regards until the next crisis...
Mungo :-)
P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
Suggestions?
Edited by: MungoHenning on Sep 15, 2010 1:39 PM

Photosmart D110 All-In-One Printer - Shadow image problem

I have been having a problem with this printer, ever since we purchased it about 2 months ago, where it will print a shadow image of text or pictures on some documets but not others. It is specific and consistent in that it will print this shadow image on some documents every time and on other documents none of the time. I have a PC and a Mac and it doesn't matter which computer I use, only which document. Sometimes it is only a part of a document, like the computer generated part of an email where it says " this person at this time on this date wrote.." but the other text will be fine. It happens on some coloring pages but not others. I spent 2 hours on the support line yesterday; it's still doing it. She had me unplug it, take off the printer software and reinstall it, update software (on my Mac) and it did not fix it. Any ideas on what may be causing this & how to fix it? I like the printer but am about to return it because of this problem. The printer we had been using was an HP C4280 and did not have this problem. I'd like to keep the printer if I can fix this problem.

I'm having the same shadow imaging problem on my Deskjet F4580, so if anyone knows how to correct it please post.. I've reinstalled/updated the driver, disabled advanced features, and deslected "Enable HP Real Life Technoliges".

Persistent Image problem

Okay, I just had the screen on this iMac replaced because of this problem with a dark line at the top of the screen. The screen has been replaced, and the dark line isn't there anymore. However, I am now having persistent image problems. This is noticeable when I use the Aurora desktop. If I have a window open (e.g. Safari) for a long enough time, and then I X out of it, I will see a shadow/ghost of it. It's most noticeable with a dark background. However, I DID change some of the settings in "Appearance," so I wonder if that might have done it. But I can't see a way to change everything back to default. Do you know if there's a way?

Hi again - a couple of ideas:
If you haven't printed the images or a while, it could be that you prepared them under a previous version of the Aperture raw and they've since been reprocessed, resulting in a slightly different look
I had an occasion about 12 months ago when an update to the Epson printer drivers caused me to have to go back and change my print setups in Aperture, due to new colour interpretations. Don't know why, but it happened... maybe your settings have changed since last printing?
Could be that you did or didn't have the appropriate soft-proofing turned on - are you using this feature?

Strange short-term persistent image problem

Hello,
I'm well aware of the typical image persistence problem, where an image can stay "burned in" after the monitor displays the same thing for hours on end.
I have a much shorter-term persistent image problem. Let's say I open a web-page, leave it open for 10 seconds and then open a new window in Safari (thus getting a pure white page). Well when that happens, the previous web-page is still shadowed on the new white.
30 seconds later it has faded, but then the same thing will happen again with anything else that's displayed.
Any ideas?
thanks
Loa

Huh, now I'm really stumped. The cyan border is also present in FCE once I render, but it doesn't seem to happen for each instance when the paper image is used. Did you import the paper image as a .gif or something else? And did you add any filters to it? Did you also add any effects? The only I'm using with the paper image is the page peel and I have not tried any other effects to see if the cyan effect comes up.
I've put a screen capture of my FCE project showing the cyan border present in the canvas as my movie is playing. Its on my idisk as FCE movie problem.tiff
http://idisk.mac.com/gindacu-Public?view=web
Thanks again for the help.

Passwords and images problem

Firefox image problem. In Firefox 3.6.12, every time I save an image that's already displayed on my screen, I see "one active download" appear in the bottom right of Firefox's window and the same image is also listed in downloads. The problem is that Firefox doing that uses more bandwidth. How do I set Firefox so that when I save an image, instead of that image getting re-downloaded from where it's stored on the internet, it's copied from wherever Firefox has it stored to display it so Firefox doesn't use as much bandwidth? Tools/options/advanced/network/offline storage is set to 50mb.
Firefox password problem. Tools/options/security/passwords has "remember passwords for sites" checked and there is nothing in my exceptions list. But Firefox keeps forgetting passwords, usually after restarting Firefox and or my whole system and on some sites, I don't even get asked "do you want to remember..." How do I fix this?
I do have CCleaner and it's set to run at startup, but all the boxes for Firefox are unchecked, so it's not the cause of either problem.

@cor-el
OK, I'll give that extension a try and see what happens, thanx! :-)
@venemovil
I right click and either select "save image as" or if I want to save an image to more than one location, I select "view image" and then use ctrl+s. Both results in Firefox re-downloading the image as I described above. It happens on every site I visit.
The password problem never happened before, but I will try disabling my extensions one at a time and see if it happens only whan a particular extension is turned on.
This is a screenshot of the extensions I do have installed.
http://i273.photobucket.com/albums/jj216/Moonbarker/Clipboard01.jpg
I've also noticed that Firefox is forgetting what sites I've visited recently (I type in part of the url of sites I've visited sometimes as recently as a few hours ago and the entire url isn't in the suggested list) and I keep having to put the Fire FTP Button back in the toolbar (next to the home/stop/reload/back-forward buttons). That may be related to the pasword problem. I don't know.

Website images problem

Hi there,
I installed the latest version of Firefox. However, some websites I'm having some image problems. For example http://www.e-masifpanel.com web site with a phone number in the upper right corner of the space. In this area the way it looks on my Firefox browser line. I remember the moment some photos do not appear on other websites. Does version issue or problem, a problem with my my settings be? Thank you.

Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong

Video image problem

Hi...A neighbor has a iMac G5 and has developed a video/image problem. The iMac boots up and sometimes shows an ok screen for a little time, sometimes not. What emerges is an array of digital black on white graphic line images (maybe I should upload a picture), but makes the screen virtually impossible to see what you want to view, thus rendering the computer useless.Any thoughts as to what this is, seems like a hardware vs, software issues, but can't say for sure. What might it be: video card, other hardware on or attached to the logic board..and mostly could it be repaired (by self or reasonable). Any and all thoughts or experience welcome as I've been no help to my good neighbor friend on this one:)..Rick

me 2 it's clear .. the new firm has poor quality than the original one...sadly .. my n93i now has quality like n70 help!!!!!!!!!!!!!!!!!!!!!

Imaging problem LR 2.7

Has anyone seen this issue arise on images that were imported ok, then all of a sudden Lightroom image rendering will only do this?
The source file appears okay as this does not happen when viewed with alternative viewer programs. However, the exports usually (not always) also look like this.
What is this imaging problem called?
I've never had this issue before, but it's started to occur with frequency ever since I've moved... only mystery is: I have all of the same equipment including camera.

folks thanks for all fo the advice, but... I think I've discovered the problem: VISTA + External Hard Drive = Picture and file corruption
I should have known: the problem is MICROSOFT!!!!! For the first time in my life, I thought seriously about switching to Apple (but then I would switch to Aperture).
Here are the old discussions. Given the dates on these, apparently, I must be a rare person left on Vista.
http://www.vistax64.com/vista-music-pictures-video/136646-image-corruption-using-external- drive-vista.html
http://social.technet.microsoft.com/forums/en-US/itprovistadeployment/thread/6ffcb5b7-ac72 -49ab-9a89-77e730db75b2/
So 3 external hard drives tested with the entire set of nearly 400 GB of pictures, videos and files.
All showing varying degrees of picture corruption, and now I've discovered video corruption as well.
My problem is, I deleted the original internal hard drive files, so I'm left with only one 1st copy, the other two are copies of copies and worse off.
I'm taking the leap.... upgrading to Windows 7 tonight. I'll let you know what happens.

Macbook pro retina ghost image problem

I have heard about the burn-in problem on macbook pro retina display especially on LG screen. After I got my macbook retina for 3 months, the ghost image problem become really really unacceptable. After 4~5mins, the image on screen will burn in obviously for quite a long time. IT IS VERY OBVIOUS!! So I drop by apple store and find a genius, he did a persistence test on my macbook. The test is under a very low brightness, and I can not even know how he was operating. After 6 minutes, he said there is no burn-in problem. He explained that, if my macbook pass the test, it means my screen is within inspection. But I can tell if this screen is good, APPLE you should take a look at your inspection and change it RIGHT NOW. Everyone of my friend who have seen the problem on my screen says it is unacceptabe, how can it be within inspection? If anyone need a photo of that, i will provide.

MoonnooM wrote:
I have made an applecare call appointment. I'll post the result after I make the call. Thank you.
Good work...
Back-up all your data.
If they replace your MacBookPro, you can avoid a service charge for runniing the back-up for you.

Macbook pro retina with ghost image problem

Can i claim my retina display that have ghost image problem?

Hi there, I had the same problem with my Macbook Pro 15`` Retina. And here is how you can find out if you have ghost image problem. There are two retina display manufacturers for Macbook Pro Retina`s LG and Samsung. And if you are luck you will have the Samsung Retina Display on your mac. Here is how you can find the manufacturer for you Macbook.
Go to your Applications folder and launch Terminal. Paste in the following and hit return:
ioreg -lw0 | grep "EDID" | sed "/[^<]*</s///" | xxd -p -r | strings -6
Look at the beginning of the second line to see which manufacturer made your display. If it starts with LP then you have an LG display. Samsung displays start with LSN.
If your display shows LP you might have this problem for sure. So here is how you can test your screen.
A simple test to check your Retina MacBook Pro display for image retention also reported as "ghosting"
http://www.mitchmalone.name/retina-test/
Run the test for 10 Min. and you will find out if you have this problem.
And if you have it, and if you are still under waranty the Apple will replace the display with Samsung for free of charge. I hope this information helps.

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns
Hi!
I've tried to modify the example of "multiple geometric patterns matching" , and just use two patterns, but when I run the VI this error appear and I doon't know how to solve it! , the error appears in the "IMAQ Learn multiple geometric patterns" block.
Running on:
- labview 32 bits
- windows 7 64 bits
- usb camera 2.0
Any sugestion would be helpful..... ! Regards
Attachments:
template_12.png ‏150 KB
template_11.png ‏123 KB
vision_multiple_pattern_matching.vi ‏127 KB

thanks all for your replies, the problem was on my template images, I had to give them information about the pattern matching, and I did it with NI Vision Template Editor, within Vision utilities, and I chose template with Feature Based.
Thank you again and Regards!

Burning From a Disc Image Problems??

I recently purchased iDVD 5. The best feature in the new iDVD for me is the ability to save my projects to disc image which lets me keep just the disc image on my hard drives with a file size of roughly 3-4 GB. This saves me a TON of space as I was having to save all of the self contained movie files along with the DVD projects in order to burn more copies for my clients in the future.
My concern is that burning these extra copies of my projects for my clients with disk utility is not as "solid" a way to create DVDs as it would be to simply burn all the copies I may need directly from iDVD.
Is this true?
Also, I have never been able to verify any disk that I burned from a disk image using disk utility. These disks play fine on my new Sony DVD player, but I have had some complaints from clients that the disks skip and don't play perfectly.
What could be causing this problem?
If I can play these disks on my home DVD player even though my computer can't verify the burn, should I be concerned?
Is the inability to verify a problem with my burner?
Pete

Len,
Others have had the verify "problem." I NEVER verify.
Really? Then I don't need to verify? My burning process goes to this automatically, I think. How do I stop it?
BTW, I did install Tiger, no problem, installed FCE and made a very short movie, only one transition, no added audio, but burned with iDVD just great! It takes some adjusting, but I am getting the hang of it, and it hasn't been too hard to learn yet
I think I will use iMovie--> for my photos/videos to DVD projects for a while, but when I get to mostly videos and all digital photos, I think I will go back to FCE (or whenever I have lots of time to be REALLY creative)
PS. I'm SURE you ARE younger than I am! I'm like Old Toad...we're older than dirt!

Portal activity report(image problem).

Hi All,
I have a problem in Portal Activity report of Number of users who logged on.
In "Number of users who logged on" report, there is one java image(applet).It is not rendering. It is giving the error :
Java Plug-in 1.6.0_01
Using JRE version 1.6.0_01 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\km39649
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
Piglet Version 1.1.35 - 07.12.01
java.lang.NullPointerException
     at com.sap.miniapps.graphics.CategoryChart.setChartType(CategoryChart.java:898)
     at com.sap.miniapps.graphics.Piglet.init(Piglet.java:268)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "Thread-7" java.lang.NullPointerException
     at sun.plugin.util.AnimationPanel.createTranslucentImage(Unknown Source)
     at sun.plugin.util.AnimationPanel.createGradientShapeImage(Unknown Source)
     at sun.plugin.util.AnimationPanel.initBackground(Unknown Source)
     at sun.plugin.util.AnimationPanel.preloadResources(Unknown Source)
     at sun.plugin.util.AnimationPanel.doPaint(Unknown Source)
     at sun.plugin.util.AnimationPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Can any one please help me why it is coming?
Thanks in Advance,
Kavitha

I am using ORACLE.
Actually the iview is the standard par iview, so i have created it from the "iview from Par" and that too in my test server seperately. I have created a new folder and under it i have created this new iview from Par. I have taken the com.sap.km.activityreport.frontend. and under this the activity report component.
I have also restarted the Data collection service. Other than these I did not do any other configurations. Any thing else is required?
Thanks in advance,
kavitha

Store images problem 6610i

I have Nokia pc Suite installed, phone 6610i is connected by cable, when I click store images I get a window that says Image store has encountered a problem and needs to close, with the possibility to debug, send an error report or don't send, aal of wich do not help. After that the Nokia windows disappear. That never happened at the earlier version of pc suite. Please some one help, Alex.

I never found a solution with that specific pc suite s/w and phone s/w.
I just kept upgrading my phone and pc suite and now it works.
Sorry this isn't much of help.
Peace,
Mo

Dynamic Image Problem in xml publisher report

Hey guys,
I hope you doing well.
I am facing a problem in rtf template for offer letter. I have requirement that applicant signature will be print on Offer letter. For that insert dummy image and change his Alternative text to url:{concat('${OA_MEDIA}','/',IMAGE_FILE)}
Where IMAGE_FILE is image file name like 14.gif etc which is exist in OA_MEDIA.
The Problem is that when I check output from application the image is blank but when I change IMAGE_FILE to hardcoded 14.gif its show image. Please help me.
Waiting for your help
Thanks and regard’s
Mazhar

Assuming that the report is run on EBS, change it to url:{?${OA_MEDIA}/IMGFILE?}
Thanks
Shree

Imaging problem

Similar Messages

Maybe you are looking for