IMap and Google recognition when using a third part domain with forwarding

Hi,
I have iWeb and have brought a domain name from Godaddy. The Godaddy domain is set to forward to the .Mac account so I can easily edit the information with iWeb - however, I have registered the site with Google (a few weeks ago now), but it still doesn't show, even if I type in the domain exactly and search.
I am tempted to get iMap, but it says something on the introduction about it may not work well with forwarding although doesn't make it clear what it actually means...?
I have heard that possibly iWeb can publish to FTP, meaning I can do it straight to my domain name, but will I only get one page, or can it create new pages.
I'm stuck, any explanations or help would be very much appreciated.
Thanks

OK. So I think it am on to it - kind of. I followed this article http://newmacuser.com/iweb-with-godaddy-domain/
Although I have still specified for Godaddy to forward my domain using the usual function which I have had enabled before - I haven't touched the masking section.
Is this right? I guessed I had to keep it forwarded, because just changing the @ symbol to web.mac.com wouldn't know what site to forward it to??
Also, will iMap now work to get me recognized in Google?
Still a little confused - can you tell

Similar Messages

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Will a iphone purchased in Singapore be covered under complete hardaware and software support when used in India

Will a iphone purchased in Singapore be covered under complete hardware and software support when used in INDIA

See Here > http://www.apple.com/legal/warranty/

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

Using iphone 5 and 5c on ios7.0.4 and would like to use these on wireless only with no carrier service for voip apps. how to i prevent the Iphone is not activated contact your carrier?

Hi i am using iphone 5 and 5c on ios7.0.4 and would like to use these on wireless only with no carrier service for voip apps. how to i prevent the error Iphone is not activated contact your carrier?

tnguyen9 wrote:
when i remove the sim card it gives me errors that there is no sim.
You should only need a SIM in it to actually activate it in iTunes. Once activated, leave the SIM in or remove it, it should not matter.
Then, turn on airplane mode. And then, go into wifi settings and re-enable wifi (this leaves the cellular radio in airplane mode = powered off).
Now your iPhone is effectively no more than a (wifi only) iPod Touch.

When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes. It also cancels/deletes that run/workout. This has happened several times. How can I keep this from happening?

If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
Take it to a servicing dealer and wait for it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

securityagent name when using IBM TAM for SSO with Hyerion

Hi,
What should we declare in the css_config.xml file for the <securityagent>, when using IBM TAM for SSO with Hyperion.
The admin guide only mentions Netegrity, but that would be the case when we use Siteminder for SSO.
Any lights??
Thanks,
Sasi

While, seems one way is to use stream to bypass login.

Bug: Pre 2 IMAP and Google sync issues with migrated 1.4.5 profile

HI!
I have a European (GSM) unlocked Pre 2 with webOS 2.0.1.
The profile was migrated from a Pre Classic with webOS 1.4.5.
After entering profile account, I had these problems:
1.
I had to enter my Google account password 3 times (got 3 notifications about that).
2.
Google contacts and Calendar sync did only work from Google to the Pre 2. After deleting and re-adding my Google account, it seems to work in both directions now.
3.
My IMAP (uwimap server) account did not recognize the special folders (sent, draft, trash). When using the same IMAP account with webOS 1.4.5, I had to enter "./" as folder prefix as a workaround to make it work.
After migrating to the Pre 2, I had to delete an re-add the IMAP account. After that, it recognized the special folders without using the workaround.
So, maybe webOS should delete and re-add all Google and IMAP accounts by itself during profile migration from 1.4.5.
Thomas
Post relates to: None

Check out : http://forums.palm.com/t5/webOS-Software/strange-behavior-syncing-Pre2-Calendar-with-Google-Calendar...

Google Voice APP and Google Voice will use cell phone minutes.

My Verizon contract has 1400 minutes shared with 3 cell phones. I noticed that my cell number was using minutes from the calling plan. I normally call the other two cell phones, and my home number (which is on my friends of family calling list). My original intention was to be able to hide behind Google Voice and not allow my cell phone number to be broadcast. Google Voice would use whatever phone number was available on their server, make the call, then connect with my cell phone to complete the connection. I didn't notice that my minutes were being used until after someone else reported that they had exceeded their plan minutes after switching their cell phone to use their Google Voice number for outgoing calls.
I called Verizon concerning this issue, and their only response was to contact the third party.
I have now, and informed my friends, to only use their number and change the Google Voice APP, Making Calls setting to "Do not use Google Voice to make any calls".
Just thought others would like to know.

As an example of the comparison: http://searchunifiedcommunications.techtarget.com/feature/Skype-vs-Google-Voice-Feature-by-feature-s...

Freezing anomalies and Error messages when using MOTU audio interface

The following problem occurs when using my MOTU 828mk2 audio interface.
The audio freezes up when playing back in Logic and any other time on the computer I'm attempting to play audio(internet, movie watching, etc.). I'm using a Mac Pro with 3gb ram. The program itself will often freeze up when attempting to play audio as well but works fine if the MOTU is turned off. The same thing goes for the internet and other programs. For instance, if I'm trying to listen to audio via the internet the page will freeze up and I most often wind up force quitting my browser.
The problem has been getting worse but now audio will not play through the MOTU but for intermittent short second stints or so before the audio in any application freezes up(rainbow spin wheel).
In Logic Express 7 this message first began to pop up:
"Error while trying to synchronize audio and MIDI".
This message is what pops up most often now:
"Logic Express has detected a possible conflict between one or more third party MIDI or audio drivers. -Be sure to install the latest drivers for all audio and MIDI equipment connected to you computer, and remove any older or unused drivers."
I have installed the recent Universal audio installer so I should be up to date with the MOTU driver but I don't know now about these, "third party drivers".
I do have my MOTU install disk so I could remove everything and reinstall..? *Do I have to remove old drivers? If so, how do I do this?*
NOTE: I had this same problem last year. For some reason I do not recall how it was resolved.

This is still a major problem for me. Any recommendations?

IMap and Google recognition when using a third part domain with forwarding

Similar Messages

Maybe you are looking for