IMap changing addresses in iCal Yosemite

There is a serious bug in iCal when entering a location/address iMap offers suggestions if it thinks what you have entered is incorrect - the suggestion is applied no matter what. If there is a suggestion you should be asked to confirm that you wish to accept the change as it's nearly always WRONG or has much less detail such as Missing Company Name, Building Name or Number often street & more often than not only partial postcodes.
If the location is something iMaps or iCal recognise it is impossible to correct & the only way of getting the correct address on to your calendar entry is to add it as as a note - very professional !!
Please get this sorted ASAP in the mean time how can I switch off the feature ??

I'm a heavy Calendar user and this is a disaster. It's driving me absolutely insane!
Yosemite whilst being a great upgrade in terms of UI is brought down by a few minor UX glitches.
For me the major problems are the Calendar address issue and using my MacBook Pro for calls. I've simply given up on this feature. Took forever to connect to the phone, eventually found I had to log out of iCloud and back in again. Now it dials calls from the MBP but I have to make the call using the phone! It often drops the call within 30 seconds with the error 'Call Failed'. Sad really - I would have thought Apple would have it covered.

Similar Messages

  • How do I change Syncing settings for Address Book, iCal, etc?

    I remember when I setup my operating system, it asked what percent of changes
    to Address Book, iCal, etc. I wanted to set between my computers, before I was notified. I think the default was 5%. But I'd like to change that setting. Does anyone know where I can find that?
    Thanks,
    Paul

    Barney-15E,
    Thanks that's it.
    I always forget to open iSync.
    I tried looking in the MobileMe.
    Thanks,
    Paul

  • HT2486 How to change address book and iCal layout/theme?

    How to change address book and iCal layout/theme?

    ele,
    Try: MacNix: Change Mac OS X 10.7 Lion iCal and Address Book Skins from Leather to Aluminum.

  • In address book & iCal each of our accounts are listed as iCloud can this be changed?

    I have a family Me.com account, all now in the cloud.
    In address book, iCal etc each of our accounts are listed as iCloud any way of renaming them to match the person?
    Mail is fine.
    Many Thanks
    Phil

    Hi Dave,
    Funny you mentioned 1932, as the birthday entry in my 'Address Book' is the 06/04/1932.
    Since it is not before but actually within 1932, is this what's causing the issue?

  • How to sync Address Book, iCal, Bookmarks

    How to sync Address Book, iCal, Bookmarks between my iMac and Macbook?

    {quote:title=Julian Wright wrote:}Do you expect everything to be free?{quote}
    Geez, ya big meanie, give the guy a break. Not everyone wants to spend $50 on a syncing solution! He just asked a question, and you heap attitude on him about his finances. Not your business!
    5480, syncing that information between two Macs is both easy and tricky at the same time. It’s easy because you really can just copy the files back and forth. But it can get tricky if, for instance, you were to change information on both sides. Then you’ve got two different versions! The general solution to this is to be pretty careful about only changing data on one side at a time. If you add some contacts on one side, don’t go working in Address Book on the other side until you’ve copied the new info over.
    “Exporting” the data, burning to CD, and then importing it on the other Mac would be a total pain in the ***, though. Much too time consuming. What you need to do, if you don’t want to pay for a solution (I didn’t for ages), is just learn to hook your computers together on a network, and copy over the relevant files directly (no exporting, no CD burning). Address Book, iCal and bookmarks data is all stored in folders in your Library folder. You just copy it over! Be sure to quit the applications before moving the data.
    Where exactly are these files, you say? How do you network? Figuring out the details is your homework assignment, but the method works. Good luck!

  • Sound Preferences Changed when using HDMI - Yosemite

    Mid 2010, 27'' iMac
    3.6 GHz Intel Core i5
    14G RAM
    When using the HDMI output (from my iMac, into my Lenovo laptop) my default sound output preferences are being changed since upgrading to Yosemite.
    I have an external sound card for my monitor speakers. the sound card is my default in and output.
    When I insert the HDMI into my laptop (and use the iMac as an external monitor for my laptop) Yosemite changes the default sound output to the iMac internal speakers.  I've used the keyboard to (cmd + F2) and toggled between the laptop external display and iMac home screen and can see the sound output changed to internal speakers)
    Appreciate this is quote a specific issue
    Any ideas if there is a work around for this?
    CT

    Hi,
    Please try this first to enable Speakers in Playback devices as follows:
    1. Right click speaker icon (bottom right hand corner)
    2. Select Playback devices
    3. Right click HDMI sound
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I activated my ipad, used iCloud & Find my iphone with Apple ID named: A@.... But now I've changed address of Apple ID from A@... to the new one: B@... Which Apple ID will be asked to re-activate 7.0.4 ipad - A or B?

    Hello everybody!
    I'm using ipad mini and the iOS is 7.0.4. I used an Apple ID (called: A), and I activated my ipad, used iCloud & Find my iphone with this A account. But now I've changed address of Apple ID from A@.... to the new one: B@.... (just changed email address of Apple ID, not create a new ID), and then I signed out iCloud, old Apple ID, etc... on my ipad and signed in with new id B@.... Everythings seem OK, I can sign in/out iCould, turn on/turn off Find my iphone as well with the new one (B@...)
    But I still have a question (and still confusing with it): What will happend when I restored my ipad? I mean my iOS is 7, so which Apple ID will be asked to re-activate my ipad after I restore it, old id A@.... (this one cannot be used now) or the new one B@...., please?
    Thank you very much for your helpful informations!

    If you've succesfully changed the ID for iCloud and Find my phone, it will be your new ID you use if you need to restore it.

  • How to change fonts in iCal?

    How to change fonts in iCal?  I can't harly read my calendar-tiny print size.  How could I change the font size?

    Your question really got me thinking.   Actually, I don't think you should feel like an idiot at all.  I think it is Apples failure that they made this difficult.  Seriously, who would ever think to press Command and arrow to switch months?  The little arrows next to the word Today are so small and inconspicuous that I remember having this very same question when I started using iCal too. 
    So, here is what I did to make it easier for my wife that uses iCal too. 
    Open System Preferences, Keyboard, Keyboard Shortcuts Tab, and finally Application Shortcuts.
    Click on the Plus symbol under the right hand pane.
    Select iCal from the Application list
    Add two shortcuts:  One named Next and the other named Previous and press your desired Keyboard Shortcut.
    I assigned the left arrow and right arrow for these tasks.
    Now it makes more sence for someone that is not used to Apples idotic way of doing things. ;-)
    I use keyboard shortcuts all over the place.  Actually, sometimes it gets me into trouble when I use someone elses computer and my shortcuts don't work.  I blame their computer for it and forget it was my "tuning".

  • Changing address in sales order item level

    Dear very good mng
    i want to know , i am trying to change ship to party address in sales order line item level
    but showing Gray mode only ..  i have maintained Sales document item level ( partners) Removed check box not modifiable
    And i activated Item partners check box at partner tab
    even i am not able to change address in sales order item level plz tell me
    Thanks a lot

    Hi Madhuri
    I  have checked my self.system does allow to change different ship to Party on line Item level .
    Please do the following steps .
    1. Replace/delete  the WE partner Number ( Example -1) in my case  in change mode.
    2. system will show some error message as show below while deleting or replacing WE with some other ship to Party code.
    3. Ignore the message and go ahead  . Please put the new Partner's number and double click
    address Screen will Pop up . You can Change the address .
    Hope this helps .Let me know for more clarification needed .
    Regards
    Santosh Verma

  • How can i backup Address Book & iCal using TM?

    How can i backup Address Book & iCal using TM?

    just back up your whole computer and those things will be backed up along with everything else. Time Machine is not well suited for cherrypicking just a few things to back up and it's a bad idea anyway. if you insist on backing up just those two things back up homedirectory/library/application support/address book and homdirectory/library/calendars.

  • How to print the changed address in delivery output

    Dear Gurus,
    As all we know the customer address comes in sales order from customer master table or address table and further get copied into delivery also in case of same SP and SH.
    My issue is that we do not maintain different SH for a sold to party so SP = SH and there addresses will also be same.
    In output we are getting address from ADRC table.
    Now if we change the ship to party address in delivery manually and get the output the printed address is unchanged.
    But I want to print  the changed address in delivery output without changing the masters and maintaining diiferent ship to party.
    Please help me how to determine it in print out???
    Thanks,
    Sanjay

    Hi,
    I think the logic you have written is wrongly on output.
    The logic is like this:
    Pass the document number into "VBPA" table.
    Execute.
    Fetch the address number against "WE(ship-to-party)".
    Pass the same address number into "ADRC" table to get the address.
    Here you will get the new address which is different from the maaster data.
    Regards,
    Krishna.

  • Default email address in Ical alarm

    Hi all. I am having problems setting the default address in alarms in Ical. The situation is like this:
    -I had 2 emails, "a" and "b", setup in my address book, both in my account (word "me" overlay on my picture).
    -When I wanted to configure an email alarm quickly in Ical, I had, in the drop down menu, the options "send email to "a" 1 day before"..."2 days before"...etc.
    -So I went into address book and deleted the "a" email since I now just use "b".
    -What happens is that the drop down menu still refers to "send email to "a"", but when I click on it, the email it appears is in fact, "b".
    I was wondering if this is a bug, or that drop down list if configured elsewhere. Or is it some kind of history.
    Thanks.

    My wife's having pretty much the same problem on her Snow Leopard MBP - two addresses for "me" in Address Book, iCal displayed the first but sent to the second. She then deleted the first "me" address in Address Book, then iCal displayed a blank address in the Alert menu and wouldn't send an alert ...
    Is there a way to rebuild iCal's links to Address Book or maybe delete which plist file? Have tried rebuild permissions, deleted any instance of that first address in Mail's Previous Recipients list, also deleted that first address in another entry in Address Book.
    Thanks for any insights.

  • HT2513 Can I change colors in ical? How?

    How do I change colors in iCal? Specifically using OS X Mountain Lion.

    You can do that by going to iCloud, select Calendar. Then you'll see on the left side where it says Calendars (under the cloud mark) click Edit, and you can add other Topics and customze them to the color you want:)

  • ESS - Change Address (IT-0006) - Workflow

    Hi,
    W need to implement workflow for approval by the modification of addresses in ESS by Portal, we want to know if there's any standard way to do it.
    Thanks in advace

    Hi,
    Ok I have understand your Req...
    The process whts u want its not the standrd process also its not avaible in the ESS MSS .....................
    Where as iin .............I will suggest you ..........As per your Senario its needed the cutomisation for the same....
    Create the custome application for the same and there you need to give the code that .........if ADD change then
    The changed address should go to manager for the apporal for this you need to develope Custome Workflow ....
    So at the last it will be Cutomisation application and workflow you need to create for the same

  • [svn:fx-trunk] 8020: Fallout from PARB changes - addressing 3 issues:

    Revision: 8020
    Author:   [email protected]
    Date:     2009-06-19 16:02:54 -0700 (Fri, 19 Jun 2009)
    Log Message:
    Fallout from PARB changes - addressing 3 issues:
    1.) http://bugs.adobe.com/jira/browse/SDK-21873 - Fixed
    2.) missed PARB requested change, adjustSelectedIndex()/adjustSelectedIndices() are collapsed into a single method, adjustSelection()
    3.) Excellent catch from Evtim - selectedIndices is now a Vector of ints instead of a Vector of Numbers (the PARB rename list had the right change!). Selection indices are always non-fractional, so we can get a slight savings by making this a Vector of ints.
    QA: Yes - you'll need to update tests for point #3, and if you worked off the PARB rename list, then you shouldn't have to update for #2, otherwise you do.
    Doc: Yes
    Checkintests: Pass, as well as List/DDL mustella tests (except for 11 List tests that need selectedIndices to be changed from Vector.)
    Reviewer: Evtim
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21873
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/List.as
        flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ListBase.as

Maybe you are looking for