IMAP issue on IOS7

When moving/managing mail on any one of my devices, the changes are not reflected on my other devices. e.g. move mail from my inbox to another folder.
The devices all point at the same IMAP account. The current functionality I am seeing defeats the purpose of IMAP given the devices are behaving as if they are on POP.
The devices are;
Iphone 5S
Ipad 3
Windows 8 PC, using outlook 365
Pre-IOS7 this worked and behaved as you would expect when using IMAP.   There have been no configuration changes to mail or mail setup on the IPhone, Ipad or Windows PC.   There have been no changes/upgrades to the IMAP server from when it was working on IOS6 to when it has now stopped working after the IO7 update.
Any ideas?   Anyone else experiencing similar issues?

Just in case your settings got mangled somehow in the upgrade, have you tried deleting and re-adding the mail account on your iPhone and your iPad?
Also, if your IMAP mail service provider offers webmail access, does the webmail portal show the same content as the Windows box, one of the iDevices, or neither?
FWIW, I am not seeing this problem on my iPhone 5 or my iPad 3. I hope this suggestion helps you regain functionality on your devices.

Similar Messages

There are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I retire my iPhone 5 to iOS 6 version ?

there are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I restore my iPhone 5 to iOS 6 version ?

You might want to check out these two threads:
https://discussions.apple.com/thread/5325838?tstart=0
https://discussions.apple.com/thread/5369545?tstart=200
This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes. Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/ Good luck!

IMAP Issues using between mail/iphone - godaddy hosted

I just got email for my domain that is hosted with godaddy. I have IMAP and have set it up properly regarding the settings.
When I send myself an email and read it on my iphone it doesn't show as read on apple mail? If I close and reopen apple mail it shows as read????
If I do it in reverse and read it on apple mail it shows as read on the iphone. Very strange, need help!!!

Right, I've just had a mess around with the settings and have deleted the original mailbox from my account. Then I followed the steps on this blog - http://www.illusion-interactive.com/content/how-sync-hotmail-ios7-using-imap (which I didn't need to go quite as far as it seemed to do all the advanced settings input automatically).
After a quick test I can confirm it now works! For some reason my Hotmail account set up on the iPhone was set to POP3 rather than IMAP.
Thanks to your heads up though I managed to get it sorted. Cheers!

Iphone 5 / iOS 6 IMAP issues

This is a strange one, however I see many people are reporting similar issues.
I just received my iPhone 5 last night and I'm unable to access my primary email accounts on the device via IMAP. After entering and deleting my email account multiple, tried with SSL (how I normally do it) and without SSL, etc... it continues to tell me that I'm entering the wrong username and password. (which I'm possitive is correct as I'm able to log in via webmail with no issues.)
My email accounts are run through a cpanel server, I've alternated between courier and dovecot on the server, no change. Mail logs on the server are showing that I'm getting to the server, my AT&T IP, etc... and that the password is being rejected. I'm wondering if it's doing something which the characters of the password when it trys to pass it to the server.
One addtional note, my iPhone 4 and iPad 2 both updated to iOS 6 on Sept 19th with no problems, IMAP is working normally on those devices. The issue is on my iPhone 5 only.
Any help would be appreciated.
Best Regards,
Joe

I had the same problem today with my iPhone5 and the upgrade to IOS 6.1 over my wireless network. The phone clearly saw the network, just wouldn't accept my password (which I verified in my keychain on my laptop). I reset the network on the phone per other posts, turned Airplane mode on and off, restored my phone. Still no luck. Then I went into my home office and held the phone right next to my airport extreme, and it finally took my password. Now its connected, with same strong signal it always had throughout my house. No idea why that worked but not arguing! Hope that helps.

Multiple IMAP issues in Outlook 2013

I know a lot of work has gone on with IMAP changes behind the scenes to make everything more responsive but some of these changes have adversely affected usability.
Here are my 3 main gripes:
1. If you have Outlook in Folder View so that you can see the "Sync Issues" folder you will see that Outlook 2013 now logs all activity to this folder and one ends up with thousands of entries per day filling this folder. I don't want these. Can I reduce
logging?
2. If you delete, edit or create IMAP folders to your account outside of Outlook you really have to fight to get Outlook to see the changes. Sometimes you have to remove the IMAP account completely and add it again just to get a proper view of the changes.
This is definitely something to do with the new caching regime. As an example Outlook does not seem to want to let go of folders deleted outside of Outlook (orphaned folders) and insists they still exist. For instance I can still move messages into these orphans
and Outlook accepts them and agrees they are there even though the folder no longer exists on the server. This is an accident waiting to happen.
3. This is a bug. If I delete a group of unread messages, usually, all except the top one show as deleted and ready to purge (grey with a line through). The top one remains not deleted and unread. As soon as I mark it as read it will then show as deleted
and ready to purge (grey with a line through).

I tested it just now. The registry data I mentioned is really aimed at either decreasing synch logging or to stop specific types of conflicts.
So I can confirm that we cannot turn off this folder base on current product design. This folder is designed for getting the basic troubleshooting information of Client Access issue.
Anyway, I am thinking two way for workaround:
1. Hide the sync issue folder via MFCMAPI, visit the following link to do that.
http://www.howto-outlook.com/howto/hidemovedeletemfcmapi.htm#hide
2. Create a Outlook rule to remove the items which is belongs to sync issue folder.
If someone has a better idea, please share it here. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

HT4623 Wi-Fi issues on IOS7

I recently upgraded my iPod Touch to IOS7. I am having problems where some apps complain that I am not connected to wi-fi when indeed I can browse various web sites in Safari. I can purchase media via iTunes store. My stock symbols update just fine. The problem symptoms: The Music /Radio app tells me I am not connected to wi-fi. And a bigger issue for me is that I can no longer wi-fi connect music to play on my Bose Soundlink Air!. The control widget doesn't show up. Before the "upgrade" there would be a small arrow in Music to select what to use for output - iPod or Bose. If I power up my MacBook Pro and launch iTunes - it sees my Bose.
Help please!

Sweet, My IPhone & IPad work again. I was ready to throw both in the river!!! Called Apple and no help, told me to buy different speaker system or contact Bose. I can't believe "tech support" at Apple didn't know the "fix". I love my Bose and would have replaced my Apple products before replacing my Soundlink Air!!!! Big thank you to Shaeburks. I never knew that control panel was there.

ICloud Syncing issues on iOS7 on 5s?

Since switching over to iOS7 and an iPhone 5s I am having the following issues:
1. All my keyboard shortcuts (which sync using icloud) are gone.
2. I cannot see any of my icloud documents in Pages, Numbers or Keynote on my iPhone?
3. If I make any changes to iwork documents on my iPad they do not upload to iCloud.
4. When I try to login to iWork in the cloud it just takes me back to the login screen without logging me in. All other iCloud functions work fine.
Anyone else experiencing similar issues? Know of any fixes?

Exactly the same issues on my iPad2 although all my iCloud files are visilbe on my iMac. In addition, I've lost access to my files for PDFPen on my iPad.

IPad AirPlay issues since IOS7 upgrade

Hi all
Since the last ios7 upgrade i've had nothing but trouble with my AirPlay set up.
I have the following set up:
HP ProLiant N40L server running iTune server (latest build)
BT HomeHub 3 / TP Link TL-PA211 WiFi extender
iPad 3rd geneeration
iHome iW1 AirPlay speaker
Before the upgrade i would get some intermittent issues, but eventually after iPad restarts i could get AirPlay working. Since the upgrade 90% of the time my iPad will not see any AirPlay devices whatseover. After a reboot of the iPad (or more) it eventually sees the Airplay speaker. iTunes however on my server always sees the AirPlay device and has no problems whatsoever connecitng to it (please bear in mind that this is still on the same WiFi network).
On the occassional 10% that my iPad does see an AirPlay device, I connect, and then almost immediately the AirPlay device dissappears from the iPad.
I've spent 2 weeks now trying to sort the issue out. As my iTunes can see the AirPlay speaker without issues and play to it, I'm assuming it's part of the ios update.
Anyone got any suggestions, as i'm ready to throw in the towel?
Thanks
Simon

Hi
First, before you lose interest - I have a solution that works so well to get BT Home Hub 3 working with 'Airplay' and Apple TV and my iPad 4, that I am so far unable to 'break' it. Please do try to break it yourself, and could you report back here or mark it with stars or whatever so I know what happened in someone else's setup?
I appreciate what you are going through, all I wanted to do was get 'Real Racing 3' running for me and the kidz on the TV that is attached to Apple TV box. Sometimes the Airplay icon appeared, sometimes not, it was chance - really frustrating.
The nub of it is this - you 'reserve' certain aspects of how the HH3 services the wifi network, so it directs data/communications via these 'reserved' ports specifically assigning them to the purpose you need - in this case, 'stuff' (technical eh?) going to the Apple TV so that Airplay works.
Apple forums somewhere list these publicised ports, and you go into HH3 management (tap in the IP address of the hub in 'safari' to get there, then put in your password for admin - it is 'admin' if you didn't change it already). In short, you use one of the games/applications that already are in the list for 'Port Forwarding', and I modified the name of a new one I made to make it like 'Airplay attempt using BT alarm' or something, because I 'copied' the BT safe alarm app details to start my custom one off. Lost yet?! Go into the HH3 manager, go to the A-Z I think it might be in 'advanced' and get 'Port Forwarding' up.
Ok, here's the things to set - if you peruse the apps/games they already list in HH3 for this sort of thing, you will see entries under 'TCP' or 'UDP' headings, and it's these sort of things we want to reserve. I only set the single specific addresses (it's just a number to you and me) that were listed on the Apple site as being to do with Airplay:
There are only 2 bits to set - you hit the button on screen in HH3 manager, to 'add entry', then select in the box marked 'protocol' that you want TCP or UDP according to the info I dug up from Apple site below - don't worry it is not complex to do you are just editing a couple of figures on a thing you don't use. Incidentally, I left the first two entries as they were (1024 was in there already) because I am just timid! So set it as below.
TCP 1024 -
UDP 1024 -
TCP 80 80
Any 123 123
TCP 443 443
Any 554 554
TCP 3689 3689
UDP 5353 5353
I took a pic of mine, for records, and this is what is in that pic. You have to enter the self-same number (eg 123 as above) no less than 4 times, this gives the results above.
On the bottom right, there is a button that says 'apply', so you hit that and it saves this new-fangled custom designed list of reserved ports/addresses for your 'Airplay BT alarm' or whatever you called it. THEN YOU MUST ASSIGN THIS CREATION OF YOURS TO A DEVICE - THE APPLE TV.
That's the basics of what I did - I have since restarted the BT HOMEHUB 3 several times, the Ipad 4 several times, the Apple TV has updated its software and has been restarted twice. STILL AIRPLAY WORKS.
So, I am reassuringly presented with the Airplay icon whenever I 'upswipe' on my ipad from the bottom of the screen - iOS 7.1 is on my ipad obviously, but that did not change the hit-and-miss of the Airplay icon until I made these mods to the HH3.
Over to you - try and break my solution please, and let me know if it works for you as well, or not. All I know is, Real Racing 3 can reliably be brought to bear on the Apple TV thing, and the Airplay icon is now never missing.
One more point - I think I also set the Apple TV IP address to be static - my ipad has had this situation for some time, along with the 'lease' set to a couple of weeks or something, so it does not try to select a different channel for wifi frequently? PLUS, I set something in the ipad I think, long ago (did not affect this issue as far as I can see), so that when the ipad 'wakes up' it does not decide to search for a better channel or IP address or something - that caused loads of glitches it seemed, then I found out my BT HH3 was on the end of dodgy phone cable not hi-quality shielded...but hey, that's a different bucket of bolts.
Good luck and let me know an outcome please, best to all.

Issues with ios7

hi all
i've just uploaded ios7 and i can t receive notifications and imessage is not able to connect. what s the issue?
thanks

no i can't it stuck on a sreen with a picture of a ubs cable with a arrow pointing to itune throgh my main computer not sure what todo is it a apple problem or my own?..

ITunes issues on ios7

Why since upgrading to ios7 does my iPhone 5 not allow me to play iTunes from the lock screen? It has the option to press play but nothing happens I have to access the iTunes app on my phone!

Hi SnoochieB,
Welcome to the Support Communities!
To address this issue, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Cheers,
- Judy

A issue about iOS7 photo album share

Hopfuly you guys might understand my English! I am a iOS7 user from china, recently I found a difficult time to use new photo alumb share, when I set up a new share I need select some photos or videos to my share, but every time when i try to select a photo, system always go to the top of my album(the oldest photo), i need scorll way down to the bottom, its quite annoying when you got many photos in your album! Hopfuly this can help you guys build iOS even better! All the best, Andy!

Hi,
The update is used for resolving issues in in windows.
If you did not encounter any issue, you can choose system restore and hide the update.
System restore:
Start>type system restore in the search box>click system restore and follow the restore wizard to restore your system.
Hide the update:
Control Panel>System and Security>Windows Update>click check for updates in the left panel>find the update and then choose hide.
Regards,
Ada Liu
TechNet Community Support

IMAP issue with one gmail account

O2 have been useless. I cannot add a certain gmail address to my Blackberry Curve 9360.
As soon as I connect one specific gmail address with the BB I immediately get an "action required" email telling me to turn on IMAP within gmail. It is enabled. I have been able to add another gmail address all with the exact details and settings other than the username and password.
O2 have come to the conclusion that this is Google's issue and has nothing to do with them. It's taken them 10 weeks, a replacement SIM card and a replacement Curve to come to this conclusion. What do I do?! O2 won't even swap the phone to another make/model as in their eyes the phone is working .
Any suggestions?

Can you see if the account is still lingering on http://www.o2email.co.uk/ ?
See if you can add the account from there. It will then push to your phone.
If this doesn't work, then
From the device, go to mobile.blackberry.com
Scroll to Communicate and click on Email.
Click on Integrate now for the email service you want to add and see if that works.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

UW-Imap issue with cram-md5

University Of Washington IMAP Server CRAM-MD5 Remote Authent...
BugTraq ID: 12391
Remote: Yes
Date Published: Jan 28 2005
Relevant URL: http://www.securityfocus.com/bid/12391
Summary:
A remote authentication bypass vulnerability affects the CRAM-MD5 authentication
functionality of the University of Washington IMAP server. This issue is due to a
logic error that fails to properly validate authentication attempts.
It should be noted that this issue only affects servers with CRAM-MD5 authentication
enabled, which is not the case by default.
A remote attacker may leverage this issue to authenticate to the affected server as
any user.
SecurityFocus Linux Newsletter #221

Tanx for the feedback.
1) I had the same thoughts but hoped to get some more tips and inside information to where to start. So if you have them, please tell me, as it might save me some search/trial and error ?
I mean: I suppose, just like the digest-md5 support, this class is registered somewhere ? any idea where ?. How does it perform the digest-md5 authentication when this is encountered en requested by the server ?.... So basically the process flow... I don't think the coding is so difficult. I already looked in some coding of a sourceforge project called FreeMail that supports cram-md5 authentication. But I like to stick to sun javamail...
2) I will have a look at this sasl, as I saw it comming by when using imap to fetch email...
Hmmm... just came to think about it... I also need CRAM-MD5 for my imap connection with the client.... almost forgot that :(... is that supported ?
What do you think is the "easiest" way to go ?: 1) or 2).. and where to find examples ?

EAC and IMAP Issues after Exchange 2013 CU6

After deploying CU6 to Exchange servers there is no way to perform activities on Exchange Online (cosidering hybrid deployment). I noticed that there is a fix for it in http://support.microsoft.com/kb/2997355 but
it seems that it doesn’t do the trick. After installing CU6 file which is altered in the script cannot be found (RemoteDomains.xaml).
Also after installing CU6 I've noticed issue with IMAP and Thunderbird. It seems that commands like move are interpreted by the server as bad commands (error 12).
Did you encounter with any of those problems? Do you have/recommend any workaround or fix?

No, Exchange is in default direcotry. I've even tried v2 of script which gets Exchange path from registry.
This file does not exist (I've looked on both CAS na MDBs)

Exchange 2013 CU6 IMAP issue

Installed CU6 on my EX2013 server on 8/29. Ran fine for a day. Then, for some reason, my IMAP has stopped working.
There are errors like this:
Performance counter updating error. Counter name is Time in Resource per second, category name is MSExchange Activity Context Resources. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance 'ad-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe'
already exists with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
    at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
lifetime, Boolean& foundFreeInstance)
    at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
    at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
    at System.Diagnostics.PerformanceCounter.InitializeImpl()
    at System.Diagnostics.PerformanceCounter.get_RawValue()
    at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : System.ComponentModel.Win32Exception (0x80004005): Access is denied
    at System.Diagnostics.Process.GetProcessHandle(Int32 access, Boolean throwIfExited)
    at System.Diagnostics.Process.get_HasExited()
    at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
6104 Microsoft.Exchange.Store.Service
2556 noderunner
2108 conhost
6100 Microsoft.Exchange.Imap4
3928 MSExchangeThrottling
572 lsass
5428 Microsoft.Exchange.Imap4Service
1948 SMSvcHost
3128 MSExchangeSubmission
1748 WmiPrvSE
564 services
2936 Microsoft.Exchange.ServiceHost
756 LogonUI
952 svchost
776 svchost
4888 MSExchangeDagMgmt
2720 Microsoft.Exchange.RpcClientAccess.Service
6264 Microsoft.Exchange.Store.Worker
1336 Microsoft.Exchange.Diagnostics.Service
5484 Microsoft.Exchange.EdgeSyncSvc
1728 SFService
1136 fms
5272 MSExchangeDelivery
1528 MSExchangeHMHost
2512 noderunner
1916 updateservice
6364 MSExchangeMailboxReplication
2504 noderunner
1408 sftracing
3092 MSExchangeHMWorker
1308 inetinfo
1908 noderunner
5452 w3wp
2496 scanningprocess
1116 svchost
520 winlogon
1896 MSOIDSVC
5832 MSExchangeFrontendTransport
4452 umservice
1496 SFService
5632 Microsoft.Exchange.Search.Service
4448 Microsoft.Exchange.AntispamUpdateSvc
4644 w3wp
3064 msexchangerepl
1088 spoolsv
1868 mqsvc
2060 WMSvc
680 svchost
5012 UMWorkerProcess
3632 rundll32
4812 Microsoft.Exchange.UM.CallRouter
280 smss
476 csrss
460 svchost
468 wininit
4988 SMSvcHost
860 svchost
1248 MSOIDSVCM
5480 Microsoft.Exchange.Imap4
5580 conhost
4240 MSExchangeTransportLogSearch
3212 rundll32
6560 MSExchangeTransport
2124 wsbexchange
844 dwm
3104 conhost
2416 MSExchangeMigrationWorkflow
7124 EdgeTransport
636 svchost
7136 conhost
2800 scanningprocess
6148 MSExchangeMailboxAssistants
2404 taskhost
2400 ForefrontActiveDirectoryConnector
5156 WmiPrvSE
3972 scanningprocess
2196 Microsoft.Exchange.Directory.TopologyService
1724 svchost
1208 hostcontrollerservice
1796 svchost
808 svchost
6120 Microsoft.Exchange.Imap4Service
404 csrss
4 System
0 Idle
Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 7124, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7124 StartupTime: 130540706592435178, currentInstance
: rpca-edgetransport-edgetransport.exe(911B6EB3) RefCount=1 SpinLock=0 Offset=28376, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 7124, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 7124 StartupTime: 130540706592435178, currentInstance : mb-edgetransport-edgetransport.exe(A5AF4BBC)
RefCount=1 SpinLock=0 Offset=28048, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 7124, counter : time in resource per second Value=58 SpinLock=0 Lifetime=Type: 1 ProcessId: 7124 StartupTime: 130540706592435178, currentInstance : ad-edgetransport-edgetransport.exe(E79D4A36)
RefCount=1 SpinLock=0 Offset=27720, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6264, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6264 StartupTime: 130540706609778922, currentInstance : rpca-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(ABB009B3)
RefCount=1 SpinLock=0 Offset=27392, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6264, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6264 StartupTime: 130540706609778922, currentInstance : mb-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(38BA31BC)
RefCount=1 SpinLock=0 Offset=27064, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6264, counter : time in resource per second Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 6264 StartupTime: 130540706609778922, currentInstance : ad-microsoft.exchange.store.worker-microsoft.exchange.store.worker.exe(11106236)
RefCount=1 SpinLock=0 Offset=26736, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6120, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6120 StartupTime: 130540706478372662, currentInstance : rpca-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(128A1B3)
RefCount=1 SpinLock=0 Offset=26408, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6120, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6120 StartupTime: 130540706478372662, currentInstance : mb-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(B4CBDCBC)
RefCount=1 SpinLock=0 Offset=26080, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6120, counter : time in resource per second Value=37 SpinLock=0 Lifetime=Type: 1 ProcessId: 6120 StartupTime: 130540706478372662, currentInstance : ad-microsoft.exchange.imap4service-microsoft.exchange.imap4service.exe(F0E98836)
RefCount=1 SpinLock=0 Offset=25752, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6560, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6560 StartupTime: 130540706541185174, currentInstance : rpca-msexchangetransport-msexchangetransport.exe(24F56C33)
RefCount=1 SpinLock=0 Offset=25424, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6560, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6560 StartupTime: 130540706541185174, currentInstance : mb-msexchangetransport-msexchangetransport.exe(92FB3D3C)
RefCount=1 SpinLock=0 Offset=25096, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6560, counter : time in resource per second Value=9 SpinLock=0 Lifetime=Type: 1 ProcessId: 6560 StartupTime: 130540706541185174, currentInstance : ad-msexchangetransport-msexchangetransport.exe(2447ECB6)
RefCount=1 SpinLock=0 Offset=24768, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6364, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6364 StartupTime: 130540706526185172, currentInstance : rpca-msexchangemailboxreplication-msexchangemailboxreplication.exe(276F4DB3)
RefCount=1 SpinLock=0 Offset=24440, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6364, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6364 StartupTime: 130540706526185172, currentInstance : mb-msexchangemailboxreplication-msexchangemailboxreplication.exe(95E41BC)
RefCount=1 SpinLock=0 Offset=24112, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6364, counter : time in resource per second Value=77 SpinLock=0 Lifetime=Type: 1 ProcessId: 6364 StartupTime: 130540706526185172, currentInstance : ad-msexchangemailboxreplication-msexchangemailboxreplication.exe(394712B6)
RefCount=1 SpinLock=0 Offset=23784, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5480, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5480 StartupTime: 130540706497122672, currentInstance : rpca-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(EAAB5DD3)
RefCount=1 SpinLock=0 Offset=23456, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5480, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5480 StartupTime: 130540706497122672, currentInstance : mb-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(1FC2541C)
RefCount=1 SpinLock=0 Offset=23128, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5480, counter : time in resource per second Value=97 SpinLock=0 Lifetime=Type: 1 ProcessId: 5480 StartupTime: 130540706497122672, currentInstance : ad-microsoft.exchange.imap4-microsoft.exchange.imap4.exe(17E0EA16)
RefCount=1 SpinLock=0 Offset=22800, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6148, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6148 StartupTime: 130540706513997680, currentInstance : rpca-msexchangemailboxassistants-msexchangemailboxassistants.exe(DEAC0933)
RefCount=1 SpinLock=0 Offset=22472, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6148, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6148 StartupTime: 130540706513997680, currentInstance : mb-msexchangemailboxassistants-msexchangemailboxassistants.exe(A754293C)
RefCount=1 SpinLock=0 Offset=22144, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6148, counter : time in resource per second Value=20 SpinLock=0 Lifetime=Type: 1 ProcessId: 6148 StartupTime: 130540706513997680, currentInstance : ad-msexchangemailboxassistants-msexchangemailboxassistants.exe(EE890EB6)
RefCount=1 SpinLock=0 Offset=21816, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6104, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6104 StartupTime: 130540706510560188, currentInstance : rpca-microsoft.exchange.store.service-microsoft.exchange.store.service.exe(A07BD4F3)
RefCount=1 SpinLock=0 Offset=21488, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6104, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 6104 StartupTime: 130540706510560188, currentInstance : mb-microsoft.exchange.store.service-microsoft.exchange.store.service.exe(4519AFC)
RefCount=1 SpinLock=0 Offset=21160, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 6104, counter : time in resource per second Value=60 SpinLock=0 Lifetime=Type: 1 ProcessId: 6104 StartupTime: 130540706510560188, currentInstance : ad-microsoft.exchange.store.service-microsoft.exchange.store.service.exe(6B0DD0F6)
RefCount=1 SpinLock=0 Offset=20832, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5452, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5452 StartupTime: 130540706426185171, currentInstance : rpca-w3wp-msexchangeservicesapppool(E8BBF810)
RefCount=1 SpinLock=0 Offset=20504, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5452, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5452 StartupTime: 130540706426185171, currentInstance : mb-w3wp-msexchangeservicesapppool(10FE94BF)
RefCount=1 SpinLock=0 Offset=20176, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5452, counter : time in resource per second Value=13 SpinLock=0 Lifetime=Type: 1 ProcessId: 5452 StartupTime: 130540706426185171, currentInstance : ad-w3wp-msexchangeservicesapppool(E0DE475)
RefCount=1 SpinLock=0 Offset=19848, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5832, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5832 StartupTime: 130540706450716432, currentInstance : rpca-msexchangefrontendtransport-msexchangefrontendtransport.exe(935D2AB3)
RefCount=1 SpinLock=0 Offset=19520, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5832, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5832 StartupTime: 130540706450716432, currentInstance : mb-msexchangefrontendtransport-msexchangefrontendtransport.exe(52FB38BC)
RefCount=1 SpinLock=0 Offset=19192, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5832, counter : time in resource per second Value=61 SpinLock=0 Lifetime=Type: 1 ProcessId: 5832 StartupTime: 130540706450716432, currentInstance : ad-msexchangefrontendtransport-msexchangefrontendtransport.exe(409CE636)
RefCount=1 SpinLock=0 Offset=18864, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5632, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5632 StartupTime: 130540706435247685, currentInstance : rpca-microsoft.exchange.search.service-microsoft.exchange.search.service.exe(3A401CB3)
RefCount=1 SpinLock=0 Offset=18536, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5632, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5632 StartupTime: 130540706435247685, currentInstance : mb-microsoft.exchange.search.service-microsoft.exchange.search.service.exe(C67EE73C)
RefCount=1 SpinLock=0 Offset=18208, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5632, counter : time in resource per second Value=22 SpinLock=0 Lifetime=Type: 1 ProcessId: 5632 StartupTime: 130540706435247685, currentInstance : ad-microsoft.exchange.search.service-microsoft.exchange.search.service.exe(FFDEB6B6)
RefCount=1 SpinLock=0 Offset=17880, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5484, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5484 StartupTime: 130540706428060178, currentInstance : rpca-microsoft.exchange.edgesyncsvc-microsoft.exchange.edgesyncsvc.exe(5590F433)
RefCount=1 SpinLock=0 Offset=17552, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5484, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5484 StartupTime: 130540706428060178, currentInstance : mb-microsoft.exchange.edgesyncsvc-microsoft.exchange.edgesyncsvc.exe(AC0B4E3C)
RefCount=1 SpinLock=0 Offset=17224, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5484, counter : time in resource per second Value=300 SpinLock=0 Lifetime=Type: 1 ProcessId: 5484 StartupTime: 130540706428060178, currentInstance : ad-microsoft.exchange.edgesyncsvc-microsoft.exchange.edgesyncsvc.exe(7321B36)
RefCount=1 SpinLock=0 Offset=16896, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4888, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4888 StartupTime: 130540706368372679, currentInstance : rpca-msexchangedagmgmt-msexchangedagmgmt.exe(AEDE63B3)
RefCount=1 SpinLock=0 Offset=16568, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4888, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4888 StartupTime: 130540706368372679, currentInstance : mb-msexchangedagmgmt-msexchangedagmgmt.exe(55FA86BC)
RefCount=1 SpinLock=0 Offset=16240, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4888, counter : time in resource per second Value=23 SpinLock=0 Lifetime=Type: 1 ProcessId: 4888 StartupTime: 130540706368372679, currentInstance : ad-msexchangedagmgmt-msexchangedagmgmt.exe(CC1DA236)
RefCount=1 SpinLock=0 Offset=15912, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4644, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4644 StartupTime: 130540706359622658, currentInstance : rpca-w3wp-msexchangeautodiscoverapppool(6DABF262)
RefCount=1 SpinLock=0 Offset=15584, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4644, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4644 StartupTime: 130540706359622658, currentInstance : mb-w3wp-msexchangeautodiscoverapppool(D1C6EF4D)
RefCount=1 SpinLock=0 Offset=15256, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4644, counter : time in resource per second Value=68 SpinLock=0 Lifetime=Type: 1 ProcessId: 4644 StartupTime: 130540706359622658, currentInstance : ad-w3wp-msexchangeautodiscoverapppool(FD072087)
RefCount=1 SpinLock=0 Offset=14928, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130540706406810182, currentInstance : rpca-msexchangedelivery-msexchangedelivery.exe(9051FBB3)
RefCount=1 SpinLock=0 Offset=14600, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130540706406810182, currentInstance : mb-msexchangedelivery-msexchangedelivery.exe(60C77F3C)
RefCount=1 SpinLock=0 Offset=14272, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5272, counter : time in resource per second Value=114 SpinLock=0 Lifetime=Type: 1 ProcessId: 5272 StartupTime: 130540706406810182, currentInstance : ad-msexchangedelivery-msexchangedelivery.exe(820B5E36)
RefCount=1 SpinLock=0 Offset=13944, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5012, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5012 StartupTime: 130540706330872711, currentInstance : rpca-umworkerprocess-umworkerprocess.exe(970CCE33)
RefCount=1 SpinLock=0 Offset=13616, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5012, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 5012 StartupTime: 130540706330872711, currentInstance : mb-umworkerprocess-umworkerprocess.exe(8A7F8A3C)
RefCount=1 SpinLock=0 Offset=13288, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 5012, counter : time in resource per second Value=34 SpinLock=0 Lifetime=Type: 1 ProcessId: 5012 StartupTime: 130540706330872711, currentInstance : ad-umworkerprocess-umworkerprocess.exe(95818B6)
RefCount=1 SpinLock=0 Offset=12960, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4812, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4812 StartupTime: 130540706293060177, currentInstance : rpca-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(E8475353)
RefCount=1 SpinLock=0 Offset=12632, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4812, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4812 StartupTime: 130540706293060177, currentInstance : mb-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(8F65881C)
RefCount=1 SpinLock=0 Offset=12304, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4812, counter : time in resource per second Value=116 SpinLock=0 Lifetime=Type: 1 ProcessId: 4812 StartupTime: 130540706293060177, currentInstance : ad-microsoft.exchange.um.callrouter-microsoft.exchange.um.callrouter.exe(78F52196)
RefCount=1 SpinLock=0 Offset=11976, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4452, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4452 StartupTime: 130540706231497667, currentInstance : rpca-umservice-umservice.exe(E39A1133)
RefCount=1 SpinLock=0 Offset=11648, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4452, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4452 StartupTime: 130540706231497667, currentInstance : mb-umservice-umservice.exe(FFBB273C) RefCount=1
SpinLock=0 Offset=11320, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4452, counter : time in resource per second Value=127 SpinLock=0 Lifetime=Type: 1 ProcessId: 4452 StartupTime: 130540706231497667, currentInstance : ad-umservice-umservice.exe(9A8AC6B6)
RefCount=1 SpinLock=0 Offset=10992, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4240, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4240 StartupTime: 130540706209778932, currentInstance : rpca-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(EF66F2D3)
RefCount=1 SpinLock=0 Offset=10664, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4240, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4240 StartupTime: 130540706209778932, currentInstance : mb-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(B020391C)
RefCount=1 SpinLock=0 Offset=10336, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 4240, counter : time in resource per second Value=13 SpinLock=0 Lifetime=Type: 1 ProcessId: 4240 StartupTime: 130540706209778932, currentInstance : ad-msexchangetransportlogsearch-msexchangetransportlogsearch.exe(20578116)
RefCount=1 SpinLock=0 Offset=10008, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3928, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3928 StartupTime: 130540706198372672, currentInstance : rpca-msexchangethrottling-msexchangethrottling.exe(8C1DA893)
RefCount=1 SpinLock=0 Offset=9680, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3928, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3928 StartupTime: 130540706198372672, currentInstance : mb-msexchangethrottling-msexchangethrottling.exe(AB2BADDC)
RefCount=1 SpinLock=0 Offset=9352, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3928, counter : time in resource per second Value=10 SpinLock=0 Lifetime=Type: 1 ProcessId: 3928 StartupTime: 130540706198372672, currentInstance : ad-msexchangethrottling-msexchangethrottling.exe(8962F4D6)
RefCount=1 SpinLock=0 Offset=9024, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3128, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3128 StartupTime: 130540705949466422, currentInstance : rpca-msexchangesubmission-msexchangesubmission.exe(60747EB3)
RefCount=1 SpinLock=0 Offset=8696, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3128, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3128 StartupTime: 130540705949466422, currentInstance : mb-msexchangesubmission-msexchangesubmission.exe(67B4173C)
RefCount=1 SpinLock=0 Offset=8368, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3128, counter : time in resource per second Value=53 SpinLock=0 Lifetime=Type: 1 ProcessId: 3128 StartupTime: 130540705949466422, currentInstance : ad-msexchangesubmission-msexchangesubmission.exe(85200236)
RefCount=1 SpinLock=0 Offset=8040, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3092, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3092 StartupTime: 130540705946653923, currentInstance : rpca-msexchangehmworker-msexchangehmworker.exe(39325ED3)
RefCount=1 SpinLock=0 Offset=7712, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3092, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 3092 StartupTime: 130540705946653923, currentInstance : mb-msexchangehmworker-msexchangehmworker.exe(6177C09C)
RefCount=1 SpinLock=0 Offset=7384, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 3092, counter : time in resource per second Value=732 SpinLock=0 Lifetime=Type: 1 ProcessId: 3092 StartupTime: 130540705946653923, currentInstance : ad-msexchangehmworker-msexchangehmworker.exe(712B0516)
RefCount=1 SpinLock=0 Offset=7056, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2936, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2936 StartupTime: 130540705918060169, currentInstance : rpca-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(39C8D53)
RefCount=1 SpinLock=0 Offset=6728, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2936, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2936 StartupTime: 130540705918060169, currentInstance : mb-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(E7963A1C)
RefCount=1 SpinLock=0 Offset=6400, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2936, counter : time in resource per second Value=265 SpinLock=0 Lifetime=Type: 1 ProcessId: 2936 StartupTime: 130540705918060169, currentInstance : ad-microsoft.exchange.servicehost-microsoft.exchange.servicehost.exe(10E8B196)
RefCount=1 SpinLock=0 Offset=6072, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2720, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2720 StartupTime: 130540705888841424, currentInstance : rpca-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(E4305E13)
RefCount=1 SpinLock=0 Offset=5744, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2720, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2720 StartupTime: 130540705888841424, currentInstance : mb-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(BBA60BDC)
RefCount=1 SpinLock=0 Offset=5416, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2720, counter : time in resource per second Value=275 SpinLock=0 Lifetime=Type: 1 ProcessId: 2720 StartupTime: 130540705888841424, currentInstance : ad-microsoft.exchange.rpcclientaccess.service-microsoft.exchange.rpcclientaccess.service.exe(B6581E56)
RefCount=1 SpinLock=0 Offset=5088, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2400, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2400 StartupTime: 130540705938997675, currentInstance : rpca-forefrontactivedirectoryconnector-defaultdomain(A627DA57)
RefCount=1 SpinLock=0 Offset=4760, categoryName: MSExchange Activity Context Resources
A process is holding onto a transport performance counter. processId : 2400, counter : time in resource per second Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 2400 StartupTime: 130540705938997675, currentInstance : mb-forefrontactivedirectoryconnector-defaul...
I've reset all the perfom counters, as that's fixed issues like this in the past. But it didn't work this time.
Any thoughts?
Eric
Eric Gunderson

I found this via web search. While the subject of the error for this person was POP, I used what he did for IMAP4 and it fixed my issue too. Like him, I'd like to understand the WHY, but I'm just happy its working for me again.
Eric
The issue was that the “State” of the PopProxy component was set to Inactive:
[PS] D:\>Get-ServerComponentstate -Identity SRVDENEX01
Server Component State
SRVDENEX01.company.com ServerWideOffline Active
SRVDENEX01.company.com HubTransport Active
SRVDENEX01.company.com FrontendTransport Active
SRVDENEX01.company.com Monitoring Active
SRVDENEX01.company.com RecoveryActionsEnabled Active
SRVDENEX01.company.com AutoDiscoverProxy Active
SRVDENEX01.company.com ActiveSyncProxy Active
SRVDENEX01.company.com EcpProxy Active
SRVDENEX01.company.com EwsProxy Active
SRVDENEX01.company.com ImapProxy Active
SRVDENEX01.company.com OabProxy Active
SRVDENEX01.company.com OwaProxy Active
SRVDENEX01.company.com PopProxy Inactive
SRVDENEX01.company.com PushNotificationsProxy Active
SRVDENEX01.company.com RpsProxy Active
SRVDENEX01.company.com RwsProxy Active
SRVDENEX01.company.com RpcProxy Active
SRVDENEX01.company.com UMCallRouter Active
SRVDENEX01.company.com XropProxy Active
SRVDENEX01.company.com HttpProxyAvailabilityGroup Active
SRVDENEX01.company.com ForwardSyncDaemon Active
SRVDENEX01.company.com ProvisioningRps Active
SRVDENEX01.company.com MapiProxy Active
SRVDENEX01.company.com EdgeTransport Active
SRVDENEX01.company.com HighAvailability Active
SRVDENEX01.company.com SharedCache Active
A quick call to Set-ServerComponentState to mark this component Active fixed the issue:
Set-ServerComponentState -Identity SRVDENEX01 -Component PopProxy -Requester HealthAPI -State Active
After doing this POP started responding as expected, using any valid hostname or IP address.
Like the user who posted to TechNet, I would also like to know why the health check failed and marked the PopProxy as inactive.
I will research this further and if I find anything I will update this post.
Eric Gunderson

IMAP issue on IOS7

Similar Messages

Maybe you are looking for