IMAP mail account is not receiving emails, but sending.

I set up an IMAP mail account 2 years ago and was working properly. But a week or so ago it stopped receiving emails, but it sends out emails. I reentered my password, deleted and recreated the account but nothing changes. Can anyone help?
Thanks.

I received email at 9:30 am then again at 11:35 EST (I am in SouthEastern PA)  Is your mailbox size anywhere near the limit?
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Similar Messages

  • One Yahoo! mail account does not receive email sent from .mac

    OK, this is an odd problem, and any help would be appreciated.
    My girlfriend's Yahoo! mail account does not receive email sent from my .mac address. If I send email from my Gmail or Yahoo! accounts she receives the message. No one else has informed me that they haven't received email from the .mac address. Additionally, the .mac account is in her address book.
    Anyway, has anyone seen a similar pattern with Yahoo! or any other email provider?
    Thanks.
    - Jennings

    Thanks for the reply . . . and yes, the recipient's email provider likely holds the answer.
    However, I was hoping someone here might have had a similar experience and could answer as the email provider is Yahoo, and they are slow in responding to help requests . . . for a period I hosted a personal, paid website through Yahoo Domains and help tickets lingered for several days on multiple occasions (this being the reason the site is no longer hosted by Yahoo). I also doubt Yahoo will expend too much energy resolving a problem for a free email account.
    Anyway, I posted in the Yahoo mail forums, and hopefully something will come-up . . . .

  • My ATT IMAP Mail account will not receive mail unless I rebuild the mailbox.

    Hi - I have one ATT IMAP Mail account that does not receive mail promptly, often taking hours or even days to arrive unless I rebuild that particular mailbox. Another IMAP account with a different provider works fine. I have tried to figure out the problem with ATT, but they seem to think the problem is Apple Mail. I know the mail should be arriving because I can see it in in webmail, but it doesn't arrive until immediately after I rebuild. What's up with this and how do I fix it?

    AT&T uses Yahoo for mail service, and Yahoo often causes problems with Mail in OS X, so there may not be a good solution. You can try the following.
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Mail not receiving emails but sending them ok. It says updated at 11:28 but that was six hours ago and it won't update.

    my Mail is not receiving on my iPad but is sending fine.  Emails are sent and received fine on my iPhone and when accessing the account directly through safari.  It says updated at 11:28 but that was six hours ago and it is stuck there.
    i have tried restarting multiple times  with no luck.

    Have you tried signing out of your Mail account and then back in again?
    Cheers,
    GB

  • I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    Try going to Mail/Preferences/Accounts/iCloud/Advanced and setting Authentication to Apple Token.

  • Mail 6.0 Not Receiving Email

    Hi there,
    I've been hounding my ISP, BigPond, for the past several weeks due to not being able to get Mail 6.0 to receive email (I should add, sends just fine). They've tried everything with no joy. Have also had Apple support on the phone... got them stumped too.
    Tried alternative, i.e. gone with Gmail and experiencing exactly the same issue - email sending OK, receiving is just not going to work. Definitely something to do with Mac Mail.
    Should I be taking my Mac back to the store or is there some OS tweak that someone can help me with?
    I have followed the settings outlined on both the BigPond and Gmail web sites. Even tried the IMAP vs POP configurations. Any help appreciated.

    Okay - I fixed it.  Here's what I did.
    - Deleted the entire mail folder inside my Preferences folder.  ~/Library/<userfolder>
    - Kept the files in the trash just in case, but didn't need them
    - Rebooted
    - Opened the System Preferences
    - Selected "Mail, Contacts & Calendars"
    - Verified the previous account was gone
    - Clicked Create
    - Created a new account and then opened Mail
    - Voila! Email
    Note - if you trash the mail folder inside Preferences, it will delete any local emails.  All my email is IMAP and I never store anything locally, so everything syched right back when the account was recreated.
    Good luck.  Hope this helps.

  • My Mac is not receiving emails, but my iPhone receives emails. How can I fix this?

    I have a MacBook Pro Retina with OS X Yosemite 10.10.2. I recently tried to send a large file through the iCloud email drop. The email stayed in my outbox for a day and made my email app extremely slow. The email never sent, so I deleted the email from my outbox and restarted the program. Now, my email is no longer receiving any emails. The same email account on my iPhone receives emails, but my Mac email program will not receive emails. I've restarted the program and the Mac, but nothing has resolved the problem. Any suggestions???

    Mail (Yosemite): If you can’t receive messages

  • I have a problem with setting up email account, I can receive emails but can't send

    How do you set up youe email account on iPad?
    I followed instructions and I can receive emails but not send

    Hi,
    As far as the outgoing of mail is concern, just verify the below points.
    Outgoing mail server.
    SSL option
    Port no : if its other then the default once.
    Outgoing Authentication Method.
    Regrads,
    Ashwin Bhadra.
    http://www.mapledti.com

  • I'm not receiving emails but can send. The message I get is The folder Inbox is full, and can't hold any more messages. To make room for more messages, delete

    I deleted lots of emails. I compacted the file. I emptied the trash. I rebooted. I deleted more emails. I rebooted. Nothing worked. Space left is approx. 50%. Pls help.

    is this an IMAP mail account? If so
    Tools menu (alt+T) > account settings > server settings and set expunge on exit.
    What version of Thunderbird do you have?

  • Have new 6 and cannot receive email, but sends ok  have icloud and yahoo set up

    new 6plus.  email sends, but cannot receive under yahoo, but ok with icloud but I am yahoo.com

    Hey there John,
    If you are still unable to receive email but are able to send, I would recommend you use the troubleshooting and info in the following article to help get that resolved:
    Get help with Mail on iPhone, iPad, and iPod touch
    First, try these basic troubleshooting steps:
    To make sure that you're connected to the Internet, open Safari and go to www.apple.com.
    Log in to your email provider's website to make sure that the account is active and the password is correct.
    Make sure your settings are correct using Mail Settings Lookup.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    Follow these steps for specific alerts.
    "Cannot get mail"
    Make sure you entered the correct password. If you enabled two-step verification through your email service provider, contact them to see if you need a special password for your iOS device.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • My mail account is not receiving my gmails. I am getting them on my iphone and ipad.  Not on the desktop anymore for some reason. Tried deleting account and adding it again.  No luck.  Suggestions?

    All of a sudden I am not receiving one of my gmails on my Mac mail account.  I have a mobile me account, a cox account, a different gmail account and they all seem to be working.  I tried deleting it and adding it again.  No luck.  Not sure what happened.  I get the emails on my iphone and ipad just not coming in on my desktop for some reason.  Any suggestions?

    I actually deleted the account and re-added it as an IMAP account and it seems to be working.  No idea why.  My other account is still a POP account, but it never had any issues.  Oh well.  I'm getting them again on my desktop.  Thanks for the response though!

  • Not receiving emails, but can send them on desktop; but can do both on iPhone.

    Ok, I have spent since a day or so since the first of this month trying to solve this issue.  I use Hostgator, which shouldn't be an issue, but it seems to be. I have on my phone all my emails that are being hosted by hostgator set up as fetch, and it recieves my emails fine. My desktop though, can't.  It can see the servers, and send emails, but it can't do anything but.  It can't even download the emails I sent to myself, but when I go on web mail I can see them all.
    My connection to the server is good:
    But for some reason I can't recieve any emails from the IMAP server.
    I put the computer is Safe Mode, and I could recieve the emails, but when I put it in normal mode, the emails don't download. I use Avast! Anti-Virus, I use SugarSync, I use Splashtop, And Free Memory Pro.
    For web browsers, I use Crome, and Safari.
    I use Apple Mail and Postbox, both can't recieve emails.
    I can't imagine what is keeping my computer from downloading from the server. 
    Can someone help please?

    I have not seen that review before and the only thing I take issue with is
    the authors of Clam AV for Mac, apparently do not understand these concepts. Both the admin and limited user can only scan files w/in "<user name>/documents". 99% of the files on a Mac are outside of "/users/<admin>,<other user>/documents. What good is a antivirus scan, that has no access?
    There is only one author and I can assure you that he fully understands the permission issues involved. He is committed to follow Apple security guidelines in this matter which say that even an admin user should not be able to see files and folders belonging to other users without their explicit permission. I realize that there is a lot of software that ignore this rule, including virtually all other A-V software vendors, but I don't think he will ever budge on that subject. I'm sure this same limitation applies to any other A-V software downloaded from the AppStore.
    ClamXav will scan any file or folder that the current user has read access to. For an admin user this is by far the majority of the files on the hard drive, not the 1% indicated by the reviewer. For a limited user, that would be reduced to only files that are owned by that user and any other files readable by "everybody".
    I realize that it has widely been suggested that users not routinely operate with admin rights, but I'm guessing the number of users that are actually practicing that are minimal. Novice users won't see that guidance and most of those that do won't be able to figure out how to accomplish that. Experienced users may give it a try, but quickly get tired of switching back and forth to do their admin duties. To me one of those admin duties would be to run ClamXav periodically to pick up anything that may have slipped by, especially when there is more than one user using the computer. Each of those other users should also be using ClamXav to inspect their own files. Of course a limited use user can use an admin userid and password if they know it to do installations, etc., so it is possible to slip something by.
    In the case of the web site version of ClamXav, a limited user can run Sentry to watch all of the entry points to the computer, including the download folder, e-mail and any external drives he has access to. That should detect any currently known malware, including Windows, before it becomes an issue.
    Lastly, as far as I have been able to determine, all the ClamAV® signatures are for malware that would be readable to an admin user and most by a limited use user. It would be a waste of time to look into the unreadable portions of the System (mostly the Unix sub-system) since there is no currently known malware that would exist there.
    What bothers me is that it won't look at files beyond ownership? I know it sounds odd, but I do deal with some form of internet esponage at times due to the type of company I am working on building.
    Again, you will be able to examine any files readable by you, any group you belong to or "everybody" as long as they are enclosed in a directory (folder) that you can access. Here's an example of a full hard drive scan I did just the other day as a test:
    Scanned directories: 192387
    Scanned files: 914610
    Total errors: 692
    The "errors" are almost certainly files I did not have read access to as an admin so I was able to scan 99.9% of the files I had access to.
    Disk Utility tells me I have 1,150,506 files at the moment, so I scanned about 79.5% of them.

  • My gmail account is not receiving email

    Just got a iphone 4s and was excited about using it to get my email but at this point my gmail account is not working. I can not get it to pick up mail. Help! I switched from BB abd it worked there just fine

    See if this link helps http://support.apple.com/kb/TS3058
    Your problem probably has to do with the gmail account rather than the iphone.

  • Not receiving email but being able to send to anyone???

    Can somebody help with this? I love the iphone but the reason i got it is for email mobility and now i can get it. I have set it up as pop account, it works in my macbook but not in the iphone, i can sent to anybody but not receive not even one.
    help please!!!!!

    You could try asking MobileMe Support (I know you're on iCloud but there's no free support for that unless you have AppleCare: some people have haad success with MobileMe Support). Go to http://www.apple.com/support/mobileme/ww/ and select your country. In the next window click on a category to expand it, then on a subject to get a link to 'live chat'.

Maybe you are looking for

  • How to turn off continuous play of podcasts?

    I know this should be a simple answer, but I can't find it anywhere. Thanks in advance for an answer. I want my podcasts to stop playing in between each episode, but they don't. I don't have the shuffle or repeat icons selected. The same thing happen

  • I am trying to copy iphoto library Error Code 36

    I am trying to copy iphoto library from one hard drive to another and get the message The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36) = Need to back iy up or my wife will kill m

  • Handling large messages with MQ JMS sender adapter

    Hi. Im having trouble handling large messages with a MQ JMS sender adapter. The messages are around 35-40MB. Are there any settings I can ajust to make the communication channel work? Error message is: A channel error occurred. The detailed error (if

  • Project Conventions for J2EE Apps Early Access...

    Hi I am trying to set up a standardized directory structure for J2EE apps that is flexible enough from a simple webapp to a complex J2EE App with multiple EJB components, WARs...etc..etc... For this, I turned to Java Blueprints Guidelines, Project Co

  • Ping - Request Timed Out

    Anyone any ideas why I cannot ping my IP address? All I get is 4 lines of Request timed out Solved! Go to Solution.