Imap message showing on server but not Mail
I am having an issue with Yosemite Mail in that messages previous to 2010 are not showing in the mailbox on Mail but can be seen on the IMAP server where they reside. Would there be any reason why this might be? I have re-built the mailbox. I have messages going back to 2006 so there are quite a few not showing. Is there any sort of limit to messages showing in Mail on IMAP?
Thanks.
iPhone>Settings>iMessages> Turn it on
Similar Messages
-
I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here -
What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun... -
Updated to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.
This is being caused by using the same Apple ID for iMessage. To fix this you have two choices:
On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". -
I keep getting a popup error message in Ical "server does not recognize name/password
I keep getting a popup error message in Ical "server does not recognize name/password" This started after they did the change to Icloud and extended our subcriptions.
TriciaI guess that the server name is incorrect, then.
Did it ever work?
Delete the account, reboot the phone, then add it back and be sure you choose Yahoo as the mail server type. Everthing should then fill in automatically except your user name and password. -
Html Validation icon shows in IE but not in Mozilla
html Validation icon shows in IE but not in Mozilla
Hi, All,
I use DWMX 2004
I placed the hmtl validation icon at the bottom of a template
so that
each page could be conveniently validated.
The icon is showing all right, both locally and online, in
IE, but it is
not showing in Mozilla.
What can I do to fix this?
www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
The icon should appear underneath the up-arrow at the bottom
of the page.
Here is the template, with html extension for your
convenience:
http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
Thanks.
AdrianJoe Makowiec wrote:
> On 29 Apr 2006 in macromedia.dreamweaver, wrote:
>
>
>>html Validation icon shows in IE but not in Mozilla
>>
>>Hi, All,
>>
>>I use DWMX 2004
>>
>>I placed the hmtl validation icon at the bottom of a
template so
>>that each page could be conveniently validated.
>>
>>The icon is showing all right, both locally and
online, in IE, but
>>it is not showing in Mozilla.
>>
>>What can I do to fix this?
>>
>>www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
>>
>>The icon should appear underneath the up-arrow at the
bottom of the
>>page.
>>
>>Here is the template, with html extension for your
convenience:
>>
http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
>
>
> I don't know about Mozilla, but it's showing here in
FireFox, which
> uses the same engine.
>
> BTW: Result: Failed validation, 24 errors
>
>
Hi, thanks for this information about Firefox. Hope someone
else may
have an answer for Mozilla.
Concerning the validation errors. I know about the million of
validation errors, we are upgrading a site from doc type
'transitional'
to doc type 'strict'. We have the site on a test server, put
the
validation icon first, let it point out the errors, then fix
them one by
one. When they have been fixed the site is published. (i.e.
we are not
claiming the site is valid when it isn't).
If somebody else can reproduce the problem in Mozilla I
should be most
grateful.
btw, I am Adrian Stock (=Adrian.Stock22), do not know why I
am showing
on the screen as 'domain unknown'.
Ah, perhaps I did not log in properly.
Adrian -
Edit GAL to show phone numbers but not email addresses
We would like to edit our company's GAL to show only the phone numbers for some staff and not their exchange email accounts. Is there a way to do this through Active Directory?
AD Environment: Server 2008 R2 Standard
Exchange Environment: Server 2008 Standard, Exchange server 2007.Link to the new thread: https://social.technet.microsoft.com/Forums/exchange/en-US/6c4158a6-107d-4da6-abad-c05106c20fde/edit-gal-to-show-phone-numbers-but-not-email-addresses?forum=exchange2010#371c659c-c002-4fb6-b5a1-ae776bf6534c
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Same command works on the server but not on the workstation
Scenario
Exchange 2010 sp3
Name Value
CLRVersion 2.0.50727.4984
BuildVersion 6.1.7600.16385
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Worstation:
Name Value
PSVersion 4.0
WSManStackVersion 3.0
SerializationVersion 1.1.0.1
CLRVersion 4.0.30319.18063
BuildVersion 6.3.9600.16406
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}
PSRemotingProtocolVersion 2.2
I input a command from my workstation using ISE
get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
Error:
The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the
parameters that take pipeline input.
The Exact same command from the Server works.
In my profile I have the following:
set-Location c:\
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
import-pssession $Session
Import-Module ActiveDirectory
$host.PrivateData.ErrorForegroundColor = 'green'
Clear-Host
From My Workstation:
PS C:\> Get-PSSession
Id Name ComputerName State ConfigurationName Availability
1 Session1 MyExchangeServer Opened Microsoft.Exchange Available
Why does the command work on the server but not on the workstation?
AlexisHi Tiri2014,
There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
Here’s a link to similar case for your reference:
Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
for the command”
http://support.microsoft.com/kb/2701827/en-us
Hope it helps
Best regards -
ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Thunderbird has just duplicated x 2 every message in my inbox but not in any other folder. It's the fourth time it's done this so how do I get rid of them?
I've just tried downloading two addons to try and fix this from the forum but one wasn't compatible with Firefox 28 and the other started downloading something very dodgy to do with .xpi file converters.
So any help would be great, thanks.first you have an anti virus problem... duplicated message almost always occur through one of two reasons. Anti virus program barfs on a message (relatively common) Server side message corruption (becoming more common, particularly at Yahoo)
Turning off anti virus checking will generally allow the message that causes the issue to download. logging into the webmail portal and deleting what you think looks like the "next" message to download will usually fix corruption that causes duplication of downloads.
Now to the cleanup.
This add-on should do that for you https://addons.mozilla.org/en-US/thunderbird/addon/remove-duplicate-messages-alte/?src=search -
After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password. It seems the only way to make it work it to turn it off the back button.
The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team -
Task fails on server but not on my development PC
hi
I have this annoying error on my server but not in my PC,
When I run the task from VisualStudio2010 it works perfectly. Then I deploy the package to my SqlServer2012 "Intgegration Services Catalogs" and run the deployed package from the SqlManagementConsole I got the error.
The source is an oracle DB and the query wich calculate the field "MONJTO_HRSEXTR" do it with this "sum(nvl(h.monto,0)) monto_hrsext" on the select statement.
I guess the problem is SSIS thinks that the column MONTO_HRSEXTR is "Unicode string[DT_WSTR]" with "lenght=38" and when the conversion process try to cast to Decimal(12,2) it fails. There are 2 big questions here
1.Why it works on my development PC and not in the server when deployed?
2.why the "Data Conversion Transtormation Editor" thinks the field is a Unicode string[DT_WSTR] if that field is a sum result from numerics fields in the oracle table
Thanks a lot!!! for any Idea
Salu2 Sergio THello
Thanks for your time, I made a modification
to the package to redirect all rows
that cause error
All errors are rows with decimal values
such as "11.3" "33.44"
All values are using "," instead of
"." and that's the problem
what is strange is that the same source,
in both cases the same database
It will be something related to the
configuration of the oracle client on the Windows
server? The Oracle is in another server, a unix server.
I do not know much about oracle.
I know we use TSNnames for connecting, but I really don't know what to see, any idea??
thanks again for your time Jan
Salu2 Sergio T -
I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?
What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock -
Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
Push button ijn appraisal showing in backend but not showing inn portal
Hi Expert,
I would like to ask that push button in appraisal while configuring ESS/MSS package.
It is showing in backend, but not showing in portal.
Request you to give your inputs to bring push button on to the portal.Hi,
are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
Regards,
Ana
Maybe you are looking for
-
How do I sync more than one iPhone to one iCal?
I want to sync my wife's new iPhone 4 with iCal that is synced with my me.com account. How do I set this up?
-
Can I make a function wait for a period of time?
Hey everyone I just wanted some idea's on how best to tackle this problem in actionscript. All I want is that when a button is pressed it fades out the current page and then fades in the new page to be displayed. How ever when trying to fade out the
-
Mathematical functions in Diadem
Can someone tell me how I simply add two channel properties together in Diadem VB script. Or if I can calculate a new value by adding a variable to a channel property. The output from the addition I would like to put back into a new Channel Property.
-
WRT610N V2 HELP!!! Wireless resets every time I attempt to download any file.
So I recently upgraded my wireless router w/ the WRT610N V2. Easy setup and everything was working great, atleast w/ my wired connection. I go to set the wireless and everything was running great i was getting great connectivity and then I went to do
-
i have currently got a Bose docking station on loan. sound is v good but it is pricey. has anyone got any suggestions on good quality but portable (holiday) docking stations/speakers? many thx