IMAP + POP service stops after startup. Cannot configure params in shell

Hello,
Just bought a MacMini, with 10.6.4 server. However, I cannot make POP nor IMAP services to work. They stop after startup. SMTP works fine though.
How do I troubleshoot? The graphical 'Mail Configure Service...' does not make the IMAP service start.
I cannot change the mail parameters via command line.
For example:
$ sudo serveradmin set mail:imap:enable_imap = no /yes is ignored.

By manually reseting the variables in the file, mail started with IMAP and POP running,
I trust this is a bug in the serveradmin .app
Here is the garbled file:
----sslcertfile variable could not be reset by serveradmin, it apparently appended data instead of overwriting:
# Note: This key is managed by Server Admin. See above before making changes
sslcertfile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.c ert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.cert.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.cert.pem
# Note: This key is managed by Server Admin. See above before making changes
sslkeyfile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.k ey.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem Ltd (SSL client).7BA20201B838A758AA227335E7FD87EB80F53DEC.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem SSL Server.EBBA9E02804AECB53A9C44F983024BEDE1397CA8.key.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem SIP Ltd.68A893BB34CC5B16AEBA36DFFE4A8B5397F9FB56.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem Ltd.1949E49930EF79AE0C0B92EFDA9699918DDC5AA8.key.pem
# Note: This key is managed by Server Admin. See above before making changes
sslcafile = /etc/certificates/MacMini.sip.com.gr.8017D0CBEBF8CC56CF776F2E03D8E3849C9F743A.c hain.pem (Email).D8106694C6517EA5D450AC90C2D2B86624A82000.chain.pem SSL Server.EBBA9E02804AECB53A9C44F983024BE.....

Similar Messages

SAPCCM4X.03 Windows Service stops after 3 sec.

Hi!
I would like to set up the SAPCCM4X agent on the satellite system.
The installation with the commando >sapccm4x -R pf=... endes without any errors.
The problem is that the appropriate SAPCCM4X.03 Windows Service stops after 3 sec.
The output on the CMD console is:
INFO: trying to register service SAPCCM4X.03 at Windows Service Control Manager
starttype of service:             manual/[auto] :
DomainName\UserName or [<LocalSystem account>] :
INFO: Agent is running (no actual pid, but actual shared memory!)
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
WARNING: The following service is registered but could not be started
SAPCCM4X.03
(command ["E:\usr\sap\SC3\SYS\exe\run\sapccm4x.exe" -Service
pf=E:\usr\sap\SC3\SYS\profile\SC3_DVEBMGS03_VMSAP01]   user <LocalSystem account>)
INFO: Updated config file E:\usr\sap\SC3\DVEBMGS03\log\sapccm4x\csmconf.
EXITING with code 0
How can I solve this problem?
Thank you
Ju00FCrgen

Hello Jürgen,
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
you could try to clean up the part of the shared memory used by the agent:
sapccm4x pf=<instance profile> -initshm
Maybe the agent starts afterwards.
Regards, Michael

ZENworks Agent Service stops after deploying 10.3.3 agent.

Hi,
Yesterday i patched our three ZCM-servers (Sles 11) with 10.3.3. I then deployed the 10.3.3 agent to some computers in the IT-department. ZCC shows that the deployment were successful. The problem is that you can not log on to the ZONE from many of these computers. The Novell ZENworks Agent Service stops. I get the following in the Application Windows Log on a Windows 7 64-bit client:
Faulting application name: ZenworksWindowsService.exe, version: 10.3.3.3582, time stamp: 0x4d654308
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7b325
Exception code: 0xc0000374
Fault offset: 0x00000000000c6ab2
Faulting process id: 0x3f8
Faulting application start time: 0x01cbe3a9dd16f0fc
Faulting application path: C:\Program Files (x86)\Novell\ZENworks\bin\ZenworksWindowsService.e xe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 019eaf5e-4f9e-11e0-986f-005056b925a1
Can anyone help me with this problem?
John Hallberg
Jonkoping University

I would try removing all versions of .NET and then reinstalling the
latest 3.5 SP1 version to see if that helps, since the Agent relies on .NET
If that does not help, I would recommend getting an SR created so the
dump could be analyzed.
On 3/16/2011 5:06 AM, hajo68 wrote:
>
> Hi,
>
> Yesterday i patched our three ZCM-servers (Sles 11) with 10.3.3. I then
> deployed the 10.3.3 agent to some computers in the IT-department. ZCC
> shows that the deployment were successful. The problem is that you can
> not log on to the ZONE from many of these computers. The Novell ZENworks
> Agent Service stops. I get the following in the Application Windows Log
> on a Windows 7 64-bit client:
>
>
> Faulting application name: ZenworksWindowsService.exe, version:
> 10.3.3.3582, time stamp: 0x4d654308
> Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp:
> 0x4cc7b325
> Exception code: 0xc0000374
> Fault offset: 0x00000000000c6ab2
> Faulting process id: 0x3f8
> Faulting application start time: 0x01cbe3a9dd16f0fc
> Faulting application path: C:\Program Files
> (x86)\Novell\ZENworks\bin\ZenworksWindowsService.e xe
> Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
> Report Id: 019eaf5e-4f9e-11e0-986f-005056b925a1
>
> Can anyone help me with this problem?
>
> John Hallberg
> Jonkoping University
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Active directory domain services stopped after removing routing and remote access role

Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..

Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Computer stops after startup, please help!!!

Hello,
I am trying to fix my MacBook... but I have been having some difficulties and need some help. Whenever I startup my MacBook Pro it takes about one or two minutes at the gray screen with the apple logo and "spinning loading thing." After that it takes me straight to a black screen where it says nothing, but then "disk0s2: 0xe0030005 (UNDEFINED)." comes on the screen. Then after it says, "-sh: /var/root/.profile: Input/output error" and then it will, after about 3 or 4 of the UNDEFINED lines, say "-sh-2.05b#"
Could anyone PLEASE help me?
Thank you very much for reading.

Try this
Boot holding down Apple/S and don't let go until you see scrolling text.
When that stops and you see a root#: prompt enter
fsck -fy
Let it run through all the checks and repairs.
If it fails first time, at any time, or finds and fixes a fault - run the command again and keep doing so (some fixes can take several passes) until it says "Appears to be OK" then enter
reboot

Media Service Stops Running and Cannot Restart

I get "One or more services are not running" - when I try to repair the issue, it doesn't fix it.
When I go to Services, to try to restart the service, Windows Server Media Streaming Service (wssmsc), it states "Error 1069: The service did not start due to a logon failure."
When I go to "Log On" for the service, it shows "This account: Workgroup\MediaAdmin$ Not sure what the password should be.
When I go to the "Dashboard" and try to restart the "Media", there is no option under "Settings", just "General" and "Anywhere Access".
This is on WSE 2012 (NOT R2).
Any assistance would be appreciated!
Thanks. Paul Carvajal

Hi Paul,
Based on your description, please refer to following operations and check if can help you.
Please open Group Policy Management and navigate to Default Domain Controller Policy, then right click it and select Edit.
When GPME appeared, please follow the path: Computer Configuration-> Policies-> Windows Settings-> Security Settings-> Local Policies-> User Rights Assignment->
Log on as a service.
Please check Define these policy settings and add the
MediaAdmin$ account to Log on as a service.
Then please restart Windows Server Media Streaming Service and monitor the restart.
If this issue still persists, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs, then view
the Dashboard log file and some other log files which be related to Media Streaming, check if you can find some more clues. (Please note: the log file is a hidden file. Please open Control Panel, select Folder Options, select View tab and check Show hidden
files, folders and drives. Then you will be able to find the log file.)
Hope this helps.
Best regards,
Justin Gu

Photoshop keeps stopping after startup.

Since installing Creative Cloud for Lightroom and Photoshop I foind that photoshop now will only run for a few seconds before quiting. If I open a file in Photoshop throught the "Edit In" command from lightroom then It almost immediately asks me if I want to save changesas if it got the shutdown command?????

Hi Peter. What is your computer spec and operating system? How does to compare to the recomended minimum requirements?
http://www.adobe.com/nz/products/photoshop/tech-specs.html

10.4.7 can't startup IMAP + POP

My Server is not able to starup IMAP & POP services.
I have no idea about what's happening!!
When I startup Mail Service.. SMTP Out/In are OK, but IMAP & POP are not.
I have the following error messages:
MAIL ACCESS:
Sep 18 23:23:15 servidor master[1674]: empty option value on line 23 of configuration file
Sep 18 23:23:15 servidor master[1674]: exiting
SYSTEM LOG:
Sep 18 23:30:34 servidor master[1722]: empty option value on line 23 of configuration file
Sep 18 23:30:34 servidor master[1722]: exiting
Sep 18 23:30:34 servidor launchd: edu.cmu.andrew.cyrus.master: exited with exit code: 75
Sep 18 23:30:34 servidor launchd: edu.cmu.andrew.cyrus.master: respawning too quickly! throttling
Sep 18 23:30:34 servidor launchd: edu.cmu.andrew.cyrus.master: 1 more failure without living at least 60 seconds will cause job removal
Sep 18 23:30:34 servidor launchd: edu.cmu.andrew.cyrus.master: will restart in 10 seconds
Sep 18 23:30:44 servidor master[1723]: empty option value on line 23 of configuration file
Sep 18 23:30:44 servidor master[1723]: exiting
Sep 18 23:30:44 servidor launchd: edu.cmu.andrew.cyrus.master: exited with exit code: 75
Sep 18 23:30:44 servidor launchd: edu.cmu.andrew.cyrus.master: respawning too quickly! throttling
Sep 18 23:30:44 servidor launchd: edu.cmu.andrew.cyrus.master: too many failures in succession
What exactly could be happening?
Thanx a lot.

I selected a certificate, and than disabled it.
If you do it without to select NONE... the "Default"
leaves blank.
I am not sure... but my problem came from this SSL
change.
Correct. Not your fault. it's a server admin bug.

'Windows Media Center Receiver Service' stops and cannot be restarted

Hi,
I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
"0x80070003: File path not found"
I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
I tried the following tasks to remedy the issue and none of them were successful:
Run SFC from cmd prompt - no issues were found
Changed the 'logon' details for the service from Network to Local
Changed the start type of the service from manual to automatic
Restored previous versions of windows - prior to windows updates
Re-install TV Tuner drivers and software
Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
Re-seat the TV tuner in a new PCI slot
The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
the TV channels in WMC that it then has issues.
I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
Any help would be much appreciated!
Thanks

I shall suggest you :
1. uninstall WinTV software and reinstall WMC from the scratch.
2. Disable AV or any other internet security application during configuring WMC.
3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
Run Setup Again.
Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
Does it help?
If the above doesn't help then try resetting WMC:-
Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
Now reconfigure WMC again
S.Sengupta, Windows Entertainment and Connected Home MVP

Imap service stopping at random

Hi,
We're running NSMS 4.15 on WinNTAS v4 sp6a. Every once in a while the imap service will exit. Nothing in the NT event logs or the NS IMAP logs. I set the logging mode to debug and there doesn't appear to be any more information in the log than before. The problem seems to not be related to load as it has happened at various times of the day (and night). Support has told us to reconstruct the mail folders which I did on Sunday with imap, pop, smtp, and http all off. Only store was running. On Tuesday the service stopped in the middle of the morning.
Any ideas out there?
tia, al

Hi!
I hade the same problem with IMAP. It seems that some mailbox has problem. One message in inbox or other folders could be case of problem.
1- If you look at the log files you can find account, which has problem. Normally, account before the message ?Messaging Server IMAP4 4.15 ? starting up? in the log file.
2- Log on with this account and find out the mail folder (inbox, sent box or other) that makes IMAP goes down. If inbox has problem the server goes down when you log on or synchronize the inbox.
3- Find out which message has problem. You may create a new folder and move the messages there to find out the problem message. Delete the problem message and run reconstruct for folder.

Search Service stopped crawling content after previously working

The search service stopped crawling contennt. This was working previously. I tried to stop full crawl and restart. The ULS logs reveals this error repeatedly. when filter on search errors.
Microsoft.Ceres.ContentEngine.SubmitterComponent.ContentSubmissionDecorator : CreateSession() failed with unexpected exception System.ServiceModel.FaultException`1[System.String]: The creator of this fault did not specify a Reason. (Fault Detail is equal
to Specified flow: Microsoft.CrawlerFlow could not be started. Unable to start a flow instance on any of the available nodes.).
Before we dropped the index and or rebuilding the Search Service application has anyone else worked on a similar issue?
Thank you.

Hi PSCoan,
From the error message, it seems that the service account running the SharePoint Search Host Controller and the SharePoint search server 15 is missing the following four local policies:
SeAssignPrimaryTokenPrivilege (Replace a process-level token )
SeImpersonatePrivilege (Impersonate a client after authentication)
SeServiceLogonRight (Log on as a service)
SeIncreaseQuotaPrivilege (Adjust memory quotas for a process)
Please go to the Local Group Policy Editor to assign the policies to the service account.
Click Start , type gpedit.msc in the
Start Search box, and then press ENTER .
Expand Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment.
Right click “Replace a process-level token” -> Properties -> Add User or Group.
Right click “Impersonate a client after authentication” -> Properties -> Add User or Group.
Right click “Log on as a service” -> Properties -> Add User or Group.
Right click “Adjust memory quotas for a process” -> Properties -> Add User or Group.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Configuring IMAP - POP - SMTP over SSL

Hi,
I have configured SSL for webserver. I have copied same cert database (cert8.db and key3.db) in the config directory of messaging server. Changed the ownership of database to messaging server user. Password file is updated. I am able to see the certficate (./msgcert list-certs and ./msgcert show-cert cert1).
SSL is enabled for IMAP and POP.
# ./getconf | grep ssl
service.imap.enablesslport = 1
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
service.pop.enablesslport = 1
service.pop.sslcachesize = 0
service.pop.sslport = 995
service.pop.sslusessl = yes
I am not able to connect to 993 and 995 port.
bash-3.00# telnet mail1 995
Trying 10.77.33.135...
telnet: Unable to connect to remote host: Connection refused
bash-3.00# telnet mail1 993
Trying 10.77.33.135...
telnet: Unable to connect to remote host: Connection refused
Am I missing any step? How do I use IMAP / POP over ssl?
Thanks and Regards,
Shashank

for a simple ssl client, use openssl:
openssl s_client -connect imap.gmail.com:993provides the following output:
CONNECTED(00000003)
depth=0 /C=US/ST=California/L=Mountain View/O=Google Inc/CN=imap.gmail.com
verify error:num=20:unable to get local issuer certificate
verify return:1
depth=0 /C=US/ST=California/L=Mountain View/O=Google Inc/CN=imap.gmail.com
verify error:num=27:certificate not trusted
verify return:1
depth=0 /C=US/ST=California/L=Mountain View/O=Google Inc/CN=imap.gmail.com
verify error:num=21:unable to verify the first certificate
verify return:1
Certificate chain
0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=imap.gmail.com
   i:/C=ZA/ST=Western Cape/L=Cape Town/O=Thawte Consulting cc/OU=Certification Services Division/CN=Thawte Premium Server CA/[email protected]
Server certificate
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=imap.gmail.com
issuer=/C=ZA/ST=Western Cape/L=Cape Town/O=Thawte Consulting cc/OU=Certification Services Division/CN=Thawte Premium Server CA/[email protected]
No client certificate CA names sent
SSL handshake has read 1017 bytes and written 324 bytes
New, TLSv1/SSLv3, Cipher is RC4-MD5
Server public key is 1024 bit
Compression: NONE
Expansion: NONE
SSL-Session:
    Protocol : TLSv1
    Cipher    : RC4-MD5
    Session-ID: 86F8C5265F6EE4524797F2139851376D20D702BB9EFFB78C5CD35999DE3B4C7A
    Session-ID-ctx:
    Master-Key: EA5857BBF58622793961B6CFEE448D079E249AF36171532F40C46C2E3887E08ACFBAC823D2186231D228ECB726140718
    Key-Arg   : None
    Start Time: 1213099885
    Timeout   : 300 (sec)
    Verify return code: 21 (unable to verify the first certificate)
---It helps you figure out if you configured your servers correctly. It shows the cert chain sent by server, negotiated cipher suite, and whether any client-auth DNs were sent.

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Cannot configure my iPhone 3gs after i have updated from 5.1.1 to os 6.0

hi i need some help, im using iphone 3gs, when i connect it to my mac it says theres an update to my iphone which i did install, but few minutes after its telling me that i need to restore my iPhone. i did restore it but i cannot configure it anymore, in itunes it says there is no sim card installed in the iphone that your attempting to activate.

in itunes its telling me theres no sim card installed in the iphone you are attemptng to activate.

I cannot configure pop account in mail, says it is offline. What to do?

I cannot configure pop account in mail, says it is offline. What to do?

Welcome to Apple Communities
Download it here and install. Sometimes the download fails with Software Update

IMAP + POP service stops after startup. Cannot configure params in shell

Similar Messages

Maybe you are looking for