Imaps connections no longer working after ios5 upgrade

Hi
I upgraded my ipad to IOS5 today. After this, connections to our imaps mail server is failing:
Oct 12 18:39:14 umdgrb dovecot: imap-login: Disconnected (no auth attempts): rip=xxx.xx.xx.xx, lip=xxx.x.xx.x, TLS handshaking: SSL_accept() failed: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac
Server runs debian 5.0.8 (dovecot v 1:1.2.15-7)
and ios 4.x device is still working fine.
Anyone have any ideas?

This is resolved. The dovecot SSL certs were a little old and generated with an
older openssl lib. We've regenerated and distributed new certificates and things are working
again. Seems support for some older SSL/x509 format has been dropped but the latest
version of openssl tools on the box generates updated formats by default.

Similar Messages

My camera connection kit stopped working after I upgraded to ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

Apps won't work after iOS5 upgrade

After iOS5 upgrade, I cant start any apps but Apples own on my iPhone 4. What should I do?

Make sure you're signed into iTunes with your original Apple ID (the one that you used to purchase the apps)
Then Sync (and make sure 'Sync Apps' is checked)
Cheers!

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

AirPrint No Longer Working After IOS6 Upgrade

I have a OfficeJet Pro 8600 Plus printer that supports AirPrint. Months ago, I upgraded an iPhone 4, iPhone 4S, iPad 2 and iPad 3 to IOS 6.0.1. Now they cannot detect the printer, whereas they all worked under IOS5. I've seen several posts about this and have tried everything, including two worthless support calls with HP. Here are the details:
1. Printer is connected to a wired network with a static IP address.
2. Bonjour is enabled on printer.
3. Replaced older Linksys BEFSX41 router with new Linksys E4200 V2 router.
4. Yes, I rebooted everything numerous times.
5. Firmware is current on router and printer.
6. Printing works fine from all computers on the wired network.
7. Can print from iPhones/iPads using HP's Printer Control app. This is great for testing, but not as a printing solution.
8. Can't detect printer (or print) using Wireless Direct to OfficeJet.
Bottom line, all IOS devices used to see the OfficeJet printer (and print) under IOS5 but no longer under IOS 6. I'm open to suggestions.
Thanks

In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
The steps below typically resolve the issue you’re experiencing:
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

ITunes no longer working after Song Upgrade.

I got onto iTunes store, was offered to upgrade 32 of my songs, I said "Yes". After the upgrading completed, iTunes main window pane no longer worked for anything but the iTunes store. It will play my music if I manually select it from the disk (via Finder) but does not seem to be able to display any of my playlists or my music library.
I am running Safari 3.0 (as an FYI).
Mac OS X 10.4.9 (on an intel mini).

Unfortunately uninstalling and reinstalling, or repairing the current copy of iTunes alone doesn't fix the problem....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

HDMI connection no longer works after Windows 8 download

Hello,
I have a HP Touchsmart tm2t Notebook and was using an HDMI cord to connect to a television since I bought the computer in 2010. A few months back, I downloaded Windows 8 and ever since then, the HDMI connection to the TV no longer works. I've tried the troubleshooting steps that I could find and nothing seems to work. Any ideas?
Thanks in advance!

Hello KatieMcK
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to connect your notebook to your TV using Windows 8, and I would be happy to assist you in this matter!
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you had installed on your computer before upgrading.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you are able to use your TV to another HDMI connected device.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

IPad messages no longer works after ios7 upgrade

After upgrading to ios7 on my iPad messages no longer works.
After I enter To: I am unable to get to the message field to enter the message.
Reboot does not solve the issue,

This issue has been resolved!

Flashcards for screen brightness no longer work after BIOS upgrade

I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice. AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615). Neither effort corrected the problem.
Anyone have any other suggestions?

Satellite T135D-S1320
Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
Another things to try is reinstalling the TVAP.
Toshiba Value Added Package for Windows 7 (64)
-Jerry

IPad 2 hdmi to tv no longer working after ios8 upgrade?

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

Zone Base Forewall for VPN connections does not work after IOS upgrade

Hi all,
We use cisco router 2911 as corporate gateway - there is Zone Based Firewall implemented - I upgraded IOS to last version (15.2(2)T1) - originaly version 15.1(4)M1 - to solve issue with Anyconnect connections (bug CSCtx38806) but I found that after upgrade the VPN users are not able to communicate with sources in other zones.
More specific
WebVPN use this virtual template interface
interface Virtual-Template100
description Template for SSLVPN
ip unnumbered GigabitEthernet0/1.100
zone-member security INSIDE
There are other zones VOICE, LAB, ...
In the policy any connection is allowed (used inspection of icmp, tcp and udp) from INSIDE zone to VOICE or LAB zone
After VPN connection I am able to reach resources in INSIDE zone (which is the most important), but not in other zones. Before upgrade it worked.
Once I changed zone in Virtual-Template interface to VOICE, I was able to reach sources in VOICE zone but not in any other. I searched more and found the stateful firewall is not working for connections from VPN as ping is blocked by policy on returning way - it means by policy VOICE->INSIDE, once I allowed communication from "destination" zone to INSIDE zone - the connections started to work, but of cause it is not something I want to setup.
Does anybody has the same experiance?
Regards
Pavel

It seems to me I should add one importatant note - if client is connected directly in INSIDE zone, he can reach resources in other zones without any issue - so the problem is only when the client is connected by VPN - not in ZBF policy setup.
Pavel

Printing from iphone/ipad does not work after ios5 upgrade

have a Brother HL-2140 that would print and show up as the "printer" when printing from an iPhone/iPad thru an Airport Extreme. Everything worked fine till upgrading to ios5 ... now the option for printing is replaced with an "no airprint printer found" ... meanwhile I can still print through the network wirelessly through multiple MacBook Pros and MacBooks around the house. I have re-installed the driver from the Bother website ... I have the Printer Sharing on ... the network allows wireless printing from laptops ... just NOT from iPhones and iPads.

Today's iOS 6.1 update fixed the printer problem.

Illustrator will no longer work after Yosemite upgrade!!!

I downloaded Yosemite on my Macbook Pro and now Illustrator will no longer work. A warning pops up that I need the newest Java runtime which I already have. What should I do? Please help

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Imaps connections no longer working after ios5 upgrade

Similar Messages

Maybe you are looking for