IMAQ 'ChunkSele​ctor' error 0xBFF69012 in MAX

I have a Point Grey Blackfly GigE camera that I am trying to access via NI MAX and then LabVIEW.
The camera itself seems to be working okay - I can get an image stream in Point Grey's native software. When I try to run it in MAX however, I get the error shown in the image below. 
I am not familiar with this particular error, so I'm not sure which settings I need to play with to get the value in range.
Has anyone else seen this error before?
IMAW C

Hi there,
I found a couple resources you can follow to troubleshoot this problem:
1. Troubleshooting GigE Vision Cameras
2. How Do I Resolve "Error: 0xBFF69012 Attribute value is out of range” When Connecting to a GigE Camer...
3. Why do I get Error 0xBFF69012 "Attribute Value is Out of Range" with my Basler GigE Camera?
I could not find any other case related but hopefully this information will help you clear the error.
Regards,
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

  • 连接Gige摄像机时出错:Error:0xBFF69012 Attribute value is out of range Attribute Name CameraAttributes::AutoFunction::AutoTargetGrayValue

    操作系统：XP
    MAX版本：14.0
    IMAQdx版本：4.3.5
    摄像头：北京嘉恒中自图像OK_AC1360
    生产商的应用软件中使用正常。在AMCAP软件（视频测试软件）中使用也正常。
    连接Gige摄像机时出错：Error：0xBFF69012 Attribute value is out of range Attribute Name CameraAttributes::AutoFunction::AutoTargetGrayValue
    试着修改 ‘AutoTargetGrayValue’ 属性值，但是MAX会无相应并死掉。
    Solved!
    Go to Solution.

    Sometimes, camera firmware is the problem.  Sometimes, the camera XML file is the problem.  Sometimes, the way that IMAQdx tries to force settings onto the camera is the problem.
    Things to try:
    1. Check with the manufacturer, and ask if new firmware is available for the camera.  If the firmware cannot be updated by the end user, you will need to get a Returm Merchandise Authorization number, and send the camera in for the upgrade.
    2. Edit the XML file that was downloaded from the camera, and remove all references to CameraAttributes::AutoFunction::AutoTargetGrayValue.  Do not alter, or remove the zip file that resides in the same location as the XML.  If you do, IMAQdx will request a fresh copy from the camera, and overwritew your changes.  You can find the XML file in C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data\XML
    3. Edit the camera .icd file in C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data, and remove the reference to CameraAttributes::AutoFunction::AutoTargetGrayValue.
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • IMAQ Read File error -1074396159

    Hi NI,
    I am getting "IMAQ Read File" error -1074396159 when trying to read a large image.  I get this error when trying to read a ~400MB image on a very clean (not many extraneous applications) Windows 7 computer with 4GB or RAM.  I tried this on two other not very clean Windows 7 computers with 4GB of RAM and 2GB of RAM respectively.  On the latter two computers I do not get this error.  I found this knowledgebase which explains one possible cause of this error.  Are there any other causes for this error?  Are there any workarounds?
    Thanks,
    Jonathan-LV

    That KB is incorrect, as the memory only needs to be virtually contiguous inside the process address space, not physically contiguous in RAM. This is not affected by how many programs are loaded (with the very slight exception that some read-only pages of DLLs can be shared cross-process in certain cases). This is really a function of how fragmented the memory space is in the process itself. The problem is that a normal 32-bit app on 32-bit Windows only has 2GB of virtual memory space. 500MB is 25% of the entire space. DLLs tend to get loaded scattered throughout the memory space for various reasons and other memory allocations that have different lifetimes cause fragmentation. The number of multi-hundred-MB chunks available is very small in a large app like LabVIEW.
    Some options to help:
    -Moving to a 64-bit OS (still using 32-bit LabVIEW) will change that 2GB address space to 4GB with no changes to your app
    -Moving to both a 64-bit OS plus 64-bit LabVIEW will change that 4GB address space to 8TB (virtually unlimited)
    Eric

  • ERROR : sgslupsSpawn : spawned max (1023) threads

    Hi,
    I'm trying to install a Oracle AS cluster which includes two infrastructures and two portals instances.
    The OS is SLES9.
    I have finished the installation without any error and logged into portal successfully.
    After running for a while, I found that some errors occured continually about every two seconds and the log file was in $ORACLE_HOME/ldap/log/oidldapxxxxx.log
    Here is the log detail.
    2005/11/14:21:08:17 * Main:0 *
    oidldapd: Release 10.1.2.1.0 - Production on mon nov 14 21:08:17 2005
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    2005/11/14:21:08:17 * Main:0 *
    Portions Copyright (c) 1992-1996, 1999, 2000, 2001, 2004, 2005 Regents of University of Michigan. All Rights Reserved.
    2005/11/14:21:08:17 * Main:0 * Starting up the OiD Server, on node dvpcsso2
    2005/11/14:21:08:17 * Main:0 * Oid Server Connected to DB store via asdb connect string.
    2005/11/14:21:08:17 * Main:0 * OiD LDAP server started.
    2005/11/14:21:08:18 * ServerController :0 * Thread Started
    2005/11/14:21:08:18 * ServerDispatcher :1 * Thread Started
    2005/11/14:21:08:18 * ServerDispatcher :5 * Thread Started
    2005/11/14:21:08:18 * ServerDispatcher :2 * Thread Started
    2005/11/14:21:08:18 * ServerWorker (REG):8 * Thread Started
    2005/11/14:21:08:18 * ServerDispatcher :3 * Thread Started
    2005/11/14:21:08:18 * ServerDispatcher :4 * Thread Started
    2005/11/14:21:08:18 * ServerListener :6 * Thread Started
    2005/11/14:21:08:18 * ServerWorker (SPW):9 * Thread Started
    2005/11/14:21:08:18 * ServerWorker (REG):7 * Thread Started
    2005/11/14:21:49:01 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:05 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:07 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:09 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:11 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:15 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:17 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:19 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    2005/11/14:21:49:21 * ServerListener :6 * ERROR : sgslupsSpawn : spawned max (1023) threads
    What's wrong with my configuration?
    Thanks in advance.

    Hi,
    We found out that the problem should be LBR SSL handshake failed.
    LBR sends a SSL handshake every 2 seconds, and Oracle AS couldn't handshake with it.
    Our LBR vender told us that is a standard SSL handshake, and the problem should be the application server.
    We have tried the health check with sslh and tcp but to no avail.
    Does anyone have any Oracle AS configuration experience of the SSL handshake with LBR.
    Note that our LBR is Alteon 2208.
    Thanks.
    Jimmy

  • HTTP error delivery Message: max transport attempts exceeded

    Hi All,
    DB:11.1.0.7
    Oracle Apps:12.0.6
    OS:IBM AIX
    We are testing the DELL punch out functionality. As part of this, system is trying to send an XML output to the supplier and it is failing with the following error message.
    We tried following two options( HTTP and SMTP) , in both cases it is failing.
    For HTTP error Delivery Message: max transport attempts exceeded is the message shown.
    For SMTP error Delivery Message: cannot send email
    Could anyone please share such an experience faced before to resolve the issue.
    Thanks for your time!
    Regards,

    Please post the complete error message.
    Please see these docs.
    Delivery of cXML PO's and Attachments to Suppliers [ID 252895.1]
    OXTA Times Out before Successfully Sending Messages Outbound in Oracle Exchange [ID 252491.1]
    CXML Documents Are Delivered But Delivery Status Is Not Updated in XML Gateway [ID 1073808.1]
    Thanks,
    Hussein

  • Firefox will not open, getting an error message about max and min do not match....

    error message detail:
    XULRunner
    Platform version'1.9.2' is not compatible with
    min version>=1.9.2.10
    max version<=1.9.2.10
    this occurs after clicking the normal firefox open icon from my desktop

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
    Don't remove personal data when uninstalling.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Getting error while taking MAX DB trans log backup.

    Hi,
    I am getting error while taking trans log backup of Maxdb database for archived log through data protector as below,
    [Critical] From: OB2BAR_SAPDBBAR@ttcmaxdb "MAX" Time: 08/19/10 02:10:41
    Unable to back up archive logs: no autolog medium found in media list
    But i am able to take complete data and incremental backup through data protector.
    I have already enabled the autolog for MAX DB database and it is writing that log file directly to HP-UX file system. Now i want to take backup of this archived log backup through data protector i.e. through trans log backup. So that the archived log which is on the file system after trans log backup completed will delete the archived logs in filesystem.  So that i don;t have to manually delete the archived logs from file system.
    Thanks,
    Subba

    Hi Lars,
    Thanks for the reply...
    Now i am able to take archive log backup but the problem is i can take only one archive file backup. Not multiple arhive log files generated by autolog at filesystem i.e /sapdb/MAX/saparch.
    I have enabled autolog and it is putting auto log file at unix directory i.e. /sapdb/MAX/saparch
    And then i am using the DataProtector 6.11 with trans log backup to backup the archived files in /sapdb/MAX/saparch. When i start the trans backup session through data protector it uses the archive stage command as "archive_stage BACKDP-Archive LOGBackup NOVERIFY REMOVE" If /sapdb/MAX/saparch has only one archive file it will backup and remove the file successfully. But if /sapdb/MAX/saparch has multiple archive files it gives an error as below,
      Preparing backup.
                Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
                Setting environment variable 'BI_REQUEST' to value 'OLD'.
                Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
                Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
    bsi_in -c'.
                Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
                Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
                Writing '/sapdb/data/wrk/MAX/dbm.ebf' to the input file.
                Writing '/sapdb/data/wrk/MAX/dbm.knl' to the input file.
            Prepare passed successfully.
            Starting Backint for MaxDB.
                Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
    bsi_in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
                Process was started successfully.
            Backint for MaxDB has been started successfully.
            Waiting for the end of Backint for MaxDB.
                2010-09-06 03:15:21 The backup tool is running.
                2010-09-06 03:15:24 The backup tool process has finished work with return code 0.
            Ended the waiting.
            Checking output of Backint for MaxDB.
            Have found all BID's as expected.
        Have saved the Backup History files successfully.
        Cleaning up.
            Removing data transfer pipes.
                Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
            Removed data transfer pipes successfully.
            Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
                #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.ebf
                #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.knl
    End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
            Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
    End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
            Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
            Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
        Have finished clean up successfully.
    The backup of stage file '/export/sapdb/arch/MAX_LOG.040' was successful.
    2010-09-06 03:15:24
    Backing up stage file '/export/sapdb/arch/MAX_LOG.041'.
        Creating pipes for data transfer.
            Creating pipe '/var/opt/omni/tmp/MAX.BACKDP-Archive.1' ... Done.
        All data transfer pipes have been created.
        Preparing backup tool.
            Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
            Setting environment variable 'BI_REQUEST' to value 'OLD'.
            Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
            Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
    in -c'.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
            Writing '/var/opt/omni/tmp/MAX.BACKDP-Archive.1 #PIPE' to the input file.
        Prepare passed successfully.
        Constructed pipe2file call 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait'.
        Starting pipe2file for stage file '/export/sapdb/arch/MAX_LOG.041'.
            Starting pipe2file process 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait >>/var/tmp/tem
    p1283767880-0 2>>/var/tmp/temp1283767880-1'.
            Process was started successfully.
        Pipe2file has been started successfully.
        Starting Backint for MaxDB.
            Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
    in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
            Process was started successfully.
        Backint for MaxDB has been started successfully.
        Waiting for end of the backup operation.
            2010-09-06 03:15:25 The backup tool process has finished work with return code 2.
            2010-09-06 03:15:25 The backup tool is not running.
            2010-09-06 03:15:25 Pipe2file is running.
            2010-09-06 03:15:25 Pipe2file is running.
            2010-09-06 03:15:30 Pipe2file is running.
            2010-09-06 03:15:40 Pipe2file is running.
            2010-09-06 03:15:55 Pipe2file is running.
            2010-09-06 03:16:15 Pipe2file is running.
            Killing not reacting pipe2file process.
            Pipe2file killed successfully.
            2010-09-06 03:16:26 The pipe2file process has finished work with return code -1.
        The backup operation has ended.
        Filling reply buffer.
            Have encountered error -24920:
                The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
            Constructed the following reply:
                ERR
                -24920,ERR_BACKUPOP: backup operation was unsuccessful
                The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
        Reply buffer filled.
        Cleaning up.
            Removing data transfer pipes.
                Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
            Removed data transfer pipes successfully.
            Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
    End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
            Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
    End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
            Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
            Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
            Copying pipe2file output to this file.
    Begin of pipe2file output (/var/tmp/temp1283767880-0)----
    End of pipe2file output (/var/tmp/temp1283767880-0)----
            Removed pipe2file output '/var/tmp/temp1283767880-0'.
            Copying pipe2file error output to this file.
    Begin of pipe2file error output (/var/tmp/temp1283767880-1)----
    End of pipe2file error output (/var/tmp/temp1283767880-1)----
            Removed pipe2file error output '/var/tmp/temp1283767880-1'.
        Have finished clean up successfully.
    The backup of stage file '/export/sapdb/arch/MAX_LOG.041' was unsuccessful.
    2010-09-06 03:16:26
    Cleaning up.
        Have encountered error -24919:
            Can not remove file '/var/tmp/temp1283767880-0'.
            (System error 2; No such file or directory)
        Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-0' ).
        Have encountered error -24919:
            Can not remove file '/var/tmp/temp1283767880-1'.
            (System error 2; No such file or directory)
        Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-1' ).
    Have finished clean up successfully.
    Thanks,
    Subba

  • Camera return to unknown HTTP error in Ni-Max during the IP axis camera detection.

    hello,
    i am facing problem regarding to connect IP axis camera with Ni-max, and I gor the error that camera return to the unknown HTTP error.
    Any one please guide me how can i solve this problem.
    In attachment I have attached the error screen shot pic. 
    thank you very much in advance.
    Attachments:
    error12.png ‏261 KB

    Hello,
    I am using labview 2012.
    and Max version is 5.4
    Ni-IMAQdx version is 4.0
    Here in attachment I have attached screen shot of available driver on my labview system.
    please guide me if any update or changes I have to do.
    I am getting this error.
    Error -1074360277 occurred at IMAQdx Open Camera.vi
    is there any suggestion how to solve this error.
    Attachments:
    driverlist.png ‏277 KB

  • Error in Portal "max no of 100 conversaction exceed" while getting 2 backnd

    hi experts
    i am getting following Error
    RFC_ERROR_COMMUNICATION: connect to SAP Gateway failed
    Max no of 100 conversaction exceed.
    please suggst me the needful??
    is this JCO-Destination error? or some thing Else??
    Thanks
    narpal

    Hi Narpal,
    By default Portal allows 100 simultaneous instant messaging sessions. But this number can be increased.
    Navigate to
    System Administration -> System Configuration -> Collaboration -> Real Time Collaboration (RTC) -> RTC Engine -> RTCEngine
    - Switch to Advanced Mode
    - Modify MaximumChatSessions parameter and set to 500
    - Restart the Portal Server
    The problem should be resolved then.
    Regards,
    Sudip

  • Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

    I'm trying to increate the ulimits for max user processes and open files for the oracle user.  I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
    login as: oracle
    [email protected]'s password:
    Last login: Fri Mar  6 09:56:02 2015 from mtkadmin12
    You are logging onto an Oracle system.
    Kickstarted on: 2014-06-05
    -bash: ulimit: max user processes: cannot modify limit: Operation not permitted
    -bash: ulimit: max user processes: cannot modify limit: Operation not permitted
    [oracle@servername ~]$

    Thanks for the update.
    I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file.  The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
    [root@mtkdevorap11d-1 ~]# su - oracle
    [oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
    core file size          (blocks, -c) unlimited
    data seg size           (kbytes, -d) unlimited
    scheduling priority             (-e) 0
    file size               (blocks, -f) unlimited
    pending signals                 (-i) 1030982
    max locked memory       (kbytes, -l) 94371840
    max memory size         (kbytes, -m) unlimited
    open files                      (-n) 65536
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority              (-r) 0
    stack size              (kbytes, -s) unlimited
    cpu time               (seconds, -t) unlimited
    max user processes              (-u) 16384
    virtual memory          (kbytes, -v) unlimited
    file locks                      (-x) unlimited
    [oracle@mtkdevorap11d-1 ~]$
    [oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
    Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
    You are logging onto an Oracle system.
    Kickstarted on: 2014-06-05
    [oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
    core file size          (blocks, -c) unlimited
    data seg size           (kbytes, -d) unlimited
    scheduling priority             (-e) 0
    file size               (blocks, -f) unlimited
    pending signals                 (-i) 1030982
    max locked memory       (kbytes, -l) 64
    max memory size         (kbytes, -m) unlimited
    open files                      (-n) 4096
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority              (-r) 0
    stack size              (kbytes, -s) unlimited
    cpu time               (seconds, -t) unlimited
    max user processes              (-u) 16384
    virtual memory          (kbytes, -v) unlimited
    file locks                      (-x) unlimited
    [oracle@mtkdevorap11d-1 ~]$

  • "an unknown internal condition has occured" error msg in MAX; fieldpoint module

    Hi All,
    I'm trying to resolve repeated 33162 errors on my Labview system (looks like it's a problem communicating with fieldpoint modules).
    I ran the MAX program to try and browse the fieldpoint controllers in the remote systems node, clicking on several of them caused
    a delay then the error msg. "an unknown internal condition has occured. Possible cause unrecoverable operating system error", see
    attached screenshot.  I should be able to browse the devices under the remote systems node, correct?
    Attachments:
    max-unknowninternalcondition.jpg ‏127 KB

    For any readers, I was able to solve the problem.  I had to reset one of my fieldpoint modules then the problem went away.  Must have been a communication problem between the PC and the fieldpoint module, so I don't see this error anymore.

  • How to fix error -50010 in MAX 4.0 self-test of PCI-6221-37?

    Hello Tom or anyone who could help
    This is a continuation of my previously posted problems getting my PCI-6221-37
    card to work.
    I reformatted the hard disk and reinstalled Windows XP Pro on the computer.  Then
    I re-installed NIDAQ 8.0 with LabVIEW 7.0, 7.1, and 8.0 support.  Now MAX
    opens in a reasonable period of time and recognizes the PCI-6221-37 card.  When I
    run the self-test option, it replies with an error -50010.  "The specified offset is out of
    range for read operations.  The operation could not be completed as specified"
    Any ideas?
    Halden

    Hi Halden-
    Let's continue our discussion here.  I am in contact with our software engineers to help diagnose this problem.  If you could provide a screenshot of the error in the other thread, it would be a huge help.  Thanks a lot-
    Tom W
    National Instruments

  • Camera problem: Error 0x80004005 on MAX

    Hi there,
    I have a Basler  acA2000-340kc, and it's not working on a Windows 7, 64 bits computer.
    I believe the NI-IMAQdx driver is properly installed, but the camera apperas on NI MAX with a red circle with white X on it as Basler GenICam Source, displaying Error 0x80004005. The error coded passed into imgShowError is unknown.
    I can't really find the origin of this problem.
    Thanks a lot for your help.

    It's really strange,
    The camera is on (green LED light), and I'm actually getting some response from it, as I can adquire frames, which depend on the amount of light (I send you one example).
    Nevertheless I;m not sure this is what I shoulod get. How can I control the parameters concerning the camera (exposition time, frame size...)?
    The error appears in LabView when I first use a code, then it doesn't appear again, and keeps on adcquiring frames like the one I send you...
    Attachments:
    centroid.png ‏170 KB

  • Phoenix 1280 USB camera gives IMAQ USB Init error?

    We're trying to use a Phoenix PC-1280 USB video camera with either Labview or the Vision Assistant. In both cases we get an error in the IMAQ USB Init.vi (eg, "IVA Acquisiition Tools palette.vi was stopped at node 0x140 of subVI IMAQ USB Init.vi"). We have the latest version of labview and the vision module. The Mutech people are being totally useless, but I suspect the problem is in their driver which is supposed to use DirectShow and should be compatible. Before we toss this $1000 camera in the trash, can someone suggest a quick fix? ...or even a slow one
    PS -- it's not the language problem, we're all in english

    Hi Cyndeigo,
    One thing to check is to see if your camera is being recognized
    by LabVIEW.  One way to do this is to use
    the USB enumerate cameras.vi.  If this is
    sending back the camera name, then make sure you are connecting the USB Init.vi
    as shown in the attachment.  If the USB
    enumerate cameras.vi isn’t feeding back any data then there is probably something
    wrong with the driver.  I hope this
    helps.   Keep me posted.
    Regards,
    GG 
    Attachments:
    usbinit.jpg ‏4 KB

  • Error 1055 OA_Get Max Axis Dispaly Value.vi - OUT Orbit Plot (Unfiltered).vi

    Hello to Everyone,
    I am trying to use OA Orbit.vi, but i having trouble, this error message is displayed: Error 1055 OA OA_Get Max Axis Dispaly Value.vi -> OA Orbit Plot (Unfiltered).vi. Is there any solution?
    LabVIEW 8.5 is used.
    The way how is connected, followed a LabVIEW Order Analyses Toolkit User Manual:
    - signal from tachometer is input to OAT Analog Tacho Procces.vi, output Speed Profile is input for Oat Orbit Plot,OAT Convert to Even Angle Signal.vi
    - signal from two proxymity probes is scaled to EU units with SVL Scale Voltage EU.vi
    - scaled signal is input to OAT Convert to Even Angle Signal.vi to get Even Angle Signal
    - Even Angle Signals (from two sensors) is input to Oat Orbit Plot.vi
    - output Even Angle Position Info from OAT Convert to Even Angle Signal.vi is connect with Oat Orbit Plot.vi
    Thanks.
    Best rigards,
    Nandor Spacek

    Hi Nandor,
    Welcome to the NI forums!
    I am not sure that I fully understand your vi based on your description, so I would kindly ask you to create a VI Snippet from the code in question, and embed it in your reply forum post as a picture. This is the recommended best practice when discussing code. Alternatively you can always attach the .vi itself to your post.
    Your LabVIEW version 8.5 is fairly dated, did you make sure that you are using a compatible version of the Order Analysis toolkit? You can check the versions of your software in MAX, or by generating a MAX report.
    Also, please post a screenshot of the error message you are getting. Sometimes you can also just hit Ctrl+C when you have the error message active, and that will copy the error message to the clipboard so you can post it here.
    Best Regards,
    T Simon
    National Instruments
    Applications Engineer
    Certified LabVIEW Developer - Certified TestStand Architect

Maybe you are looking for