IMAQ for USB 0xBFF60488 エラー

WindowsXP(SP2)
USB2.0カメラ
Vision Developer
IMAQ for USB
という構成で稀に添付のエラーになる場合があります。
「最小値は０以上である必要があります。」
との言葉について思い当たるパラメータはありません。
このエラーの意味と回避策を教えてください。
添付:
IMAQUSBErrorDialog.JPG ‏16 KB

VBAI様
平素よりNI製品をご利用いただきまして誠に有難うございます。
日本ナショナルインスツルメンツ　技術部河野です。
ご使用のOSの言語は日本語でしょうか。
NI-IMAQ for USB cameraはOSの言語が英語のみに対応しており、英語以外のOSで動作した場合
表題のエラーが発生する事例が報告されております。
この問題については下記Discussions Forumのスレッドで取り上げられています。
Discussions Forum - USB DRIVER FOR IMAQ
http://forums.ni.com/ni/board/message?board.id=170&thread.id=154541&view=by_date_ascending&page=1
回避策ですが、日本語版OSに対応したパッチがリリースされており、これを使用すれば問題が回避される可能性がございます。
以下リンクよりパッチをダウンロードして頂けますので、一度お試し頂ければと思います。
USBタイプのカメラを使用して、画像集録する方法
http://digital.ni.com/public.nsf/allkb/B68A2D48C69E7EF2862570410044C777
以上、ご不明な点ございましたら再度ご連絡頂ければと存じます。
宜しくお願いいたします。
日本ナショナルインスツルメンツ株式会社
技術部　河野　結花
TEL: 0120-527196
弊社のサポートに関する情報は以下のサイトをご覧ください。
http://www.ni.com/support/ja/

Similar Messages

  • NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

    When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with  Labview 7.0 or higher;  or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0  and vision 8.2.1 packs with Labview 8.0 with no success.

    Hello mcg,
    I am not familiar with NI-IMAQ for USB 1.1.1.  The newest version I know of that we have is 1.0 at the following link:
    NI-IMAQ for USB Cameras 1.0
    You are correct that you need LabVIEW 8.0 and Vision 8.0 installed.  After this you should be able to install this very simply.  If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
    Please let us know if you have any more trouble on this.  Please post a screenshot of the error as well.
    Regards,
    Luke H

  • Cant install NI-IMAQ for USB Cameras

    i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
    thx
    Regards

    nolsqn,
    Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
    System Requirements:
    - Windows 2000/XP (English,
    Italian, Japanese, French, Italian, Norwegian, Dutch,
    Spanish/Portuguese, Russian, and simple Chinese)
    - LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
    - Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
    - Vision Assistant 8.0 or higher for the USB Express VI
    It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
    --Michelle
    Instrument Control R&D
    National Instruments
    Instrument Control
    Machine Vision

  • Download NI-IMAQ for usb cameras

    where can i get the NI-IMAQ for USB cameras???
    i woul like to download this application for my registered product

    Can be taken from External link . 
    I copied this link from this thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=154541&requireLogin=False
    Regards, Guenter

  • Problem with NI-IMAQ for usb

    hi. i have labview 8.0 and vision 7.1. i installed ni-imaq for usb but the vi blocks didn't appear in function palet. does ni-imaq work with labview 8.0 and is it important to have the same labview and vision? if there is a new version of ni-imaq to work with labview 8.0 please send me the link.

    Ali,
        As far as compatibility, LabVIEW 8.0 is compatible with Vision 8.0, 8.2, and 8.2.1 -- it is not compatible with Vision 7.1 so that may be causing the issues you are seeing.  LabVIEW versions are only compatible with the same, and newer versions of Vision.  As far as IMAQ, here is a link to the Version Compatibilities of LabVIEW and IMAQ.  Let me know if you have more questions!
    -Allison S.
    Calibration Services
    Product Support Engineer

  • Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

    Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition.   I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail.   Any input is appreciated. 

    Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW?  Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver.  You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go.  Hope this helps.
    Jason N 

  • 不能使用 IMAQ for USB Camera

    我安裝 labview 8.5 + Vision development 8.2 + Imaq for USB
    但安裝完了以後並沒有在 labview 裡面看到 usb 的相關元件
    請問是版本上的問題嗎??
    謝謝

    謝謝二樓, 我的確使用這個網站抓的軟體
    - LabVIEW 7.0 or later.    ---> 我的是 8.5
    - Vision Development Module 7.1 or later -->  我的是 8.2
    - NI Vision Acquisition Software 7.1 or later, for USB LabVIEW support. --> 我的是 8.5.1
    - Vision Assistant 7.1 or later, for  USB Vision Assistant plug-in module support. --> 有
    - Vision Assistant 8.0 or later, for USB Express VI support. --> 有
    請問還有哪方面有問題呢
    謝謝

  • IMAQ for USB cameras error -1074396024 system error

    Hi,
    I used a IMAQ for usb cameras.vi. It works well in my laptop which is a newer one. Well, when I changed to an old one computer and ran it, the error shows that system error, i.e. -1074396024. Could you tell me what it means and how to fix it?
    Thanks.

    Hi, 
    I tried to use MAX to configure the Dazzle card, see the attached file. It says that it does not have any video mode which is supported. Our camcorder has the analog signal output. Is it due to the camcorder problem or this Dazzle USB converter problem? Thanks.
    In addition, I am wondering if this IMAQdx can configure this camcorder from the error.
    Attachments:
    error2.jpg ‏112 KB

  • From Analog CCD to NI-IMAQ for USB Cameras?

    I installed the NI-IMAQ for USB Cameras to obtain video feed from a SONY CCD camera in real-time. This camera only has the S-Video analog output so I used a Plextor PX-TV100U A/D converter to transform this signal to USB feed. It worked at first but after running my Vision VIs a couple of times NI-IMAQ could no longer establish a connection with the camera. And as I shut down my LabView 8.5, the whole computer rebooted automatically. The error messages from LabView 8.5 varied from "Not able to establish a connection to the camera... might be in use" to "No video driver installed...". None of it made any sense because the VI worked sometimes without errors. And the same thing happened to all three computers in my research lab at Tufts University.
    I realize that my camera is going through a signal conversion before the USB, but why would NI-IMAQ for USB Cameras crash the whole computer? Also, is there a way to control my camera shutter speed from NI-IMAQ? I thought perhaps the camera wasn't setup right for the image acquisition. Help!!

    Hi HTL,
    IMAQ for USB only works with cameras that are DirectX compatible.  Can you be sure that the information coming out of the A/D converter is compatible?  Also, when you say "it worked at first" what exactly do you mean?  Were you able to do image processing on images brought in via the camera?  If you had Measurement and Automation Explorer (MAX) open and the camera selected at the time you tried to run a program that called the camera, you should get an error like you saw (Not able to establish connection).
    Wes P
    Applications Engineer
    National Instruments
    Wes P
    Certified LabVIEW Developer

  • Support for USB cameras in VBAI?

    NI have a free driver that allows Vision 7.1 to access USB 2 cameras. Is there anything similar available for VBAI that would allow me to use an industrial USB 2.0 camera?

    The free NI-IMAQ for USB Cameras driver is meant to support simple USB webcams that use DirectShow.  For machine vision or scientific imaging applications, most USB cameras don't have the performance or the features needed, like triggering.  The primary "customer" for the free driver has been universities that use webcams in labs.
    With that said, there are a few industrial USB cameras out there that can be used for machine vision.  The problem is tha there is no industrial USB camera standard that covers them all (like there is with FireWire), so companies like National Instruments would have to provide and support different drivers and software tools for every indutrial USB camera. 
    A better solution is IEEE 1394 (or FireWire).  They offer the same performance as USB 2.0 cameras and are around the same price.  On top of that, almost every large industrial camera manufacture has a line of industrial FireWire cameras (including Sony, Basler, FLIR, and Cohu), and they all conform to the same DCAM (or IIDC) standard.  WIth this standard, our one driver, NI-IMAQ for IEEE 1394 Cameras, works with all of them.
    Vision Builder AI is designed to solve machine vision applications without programming, while USB cameras usually don't provide the triggering or advanced modes necessary for machine vision.  Because machine vision and USB cameras don't usually go together, we didn't provide support for USB cameras within Vision Builder AI.  My question to you, another_novice, is why would you like to use a USB camera with Vision Builder AI?  Are there particular features in a certain USB camera that you can't find in other cameras?  I would really like to know so we can get a better picture of how our customers are using our products.
    Thank you.
    KyleV.

  • IMAQ Vision: (Hex 0xBFF60488) Minimum coverage value should be greater than zero.

    Having some trouble with extended acquisition of a Mightex USB camera using LabVIEW 8.5.  LabVIEW is able to acquire images from this camera using IMAQ USB, a snap every ~30 seconds.  After about 1100 snaps LabVIEW errors out: IMAQ Vision:  (Hex 0xBFF60488) Minimum coverage value should be greater than zero.
    Any help would be greatly appreciated!

    Check this discussion

  • My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    Here:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

    Dear All,
    Good day!,
    This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
    Environment:
    Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
    Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to . 
    Steps followed:
    Connected to the port replicator before installing the device driver. 
    Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
    3.    Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
    4.    Questions:
    T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ? 
    Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ? 
    Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
    For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

    I have the same problem with my T400 updated to Win 7 pro.  Not happy.  

  • NI-IMAQ for IEEE 1394 hardware compatibilities

    Need to check if the following camera can work with NI-IMAQ for IEEE 1394?
    http://www.ptgrey.com/products/dragonfly/index.html
    thank you
    Attachments:
    dragonfly.pdf ‏1052 KB

    If you look at How Can I Tell If My IEEE 1394 (Firewire) Camera Is Supported by the NI-IMAQ for 1394 you will find the dragonfly listed there.
    You will also find a reference to Digital camera specification: 1.3 in the camera data sheet which confirms this.
    Hope this helps!
    Amaury
    NI Applications Engineer

  • Security: Read-only for USB and FireWire

    Is there a way to secure the external data ports on a Mac so you can't write to a USB and/or FireWire drive? Obviously we need the SATA / InternalHD to be regular read/write. I've swapped out the optical drive so it is a read-only device, but it would be nice to have a solution that prevents writing to optical media as well.

    I found two links that provide a solution.
    http://images.apple.com/server/macosx/docs/TigerSecurity_Config021507.pdf
    http://images.apple.com/server/macosx/docs/LeopardSecurity_Config20080530.pdf
    I can't find the page(s) that reference these PDFs, so you have to download them directly.
    Within the two documents are information about "removing support for mass storage devices" by trashing certain files (IOUSBMassStorageClass.kext for USB and IOFireWireSerialBusProtocolTransport.kext for FireWire).
    One caveat seems to be that these files may be restored through system updates, so you need to write a login script (script provided in Leopard PDF) to ensure they are removed or simply be aware of the issue when installing system updates.

Maybe you are looking for

  • Can't Install Snow Leopard on external drive

    Hey Mac Addicts, I'm trying to install Snow Leopard on an external drive (Lacie Triple Rugged, FW800 USB3.0)  but keep on getting "Installation failed, can't copy the support files. My drive is partioned in to 5x100GB partitions, GUID partition schem

  • I synced my iPhone to iTunes and NONE of my music will play, just the purchased ones.. Why?

    So I synced my phone to my laptop, transfered all 192 songs that used to be on it, went to play them and nothing. There is just this stupid red round circle with a square in the middle of it next to my music. The only ones that work are the ones that

  • Copying CUSTOMER_H data from SDCR to SDHF document.

    While creating SDHF from SDCR, I want to copy all the values of CUSTOMER_H structure from preeceding document to next document. I used ORDER_SAVE~PREPARE BADI but it does not update the custom structure. The psedo logic is: 1. Get SDCR document GUID

  • Solaris 10 Process Creation Cost (SMP)

    Hey there, I'm writing a authentication adapter for an inhouse application in C. The first throwaway - prototype forks a child and execs a shell script which uses the solaris ldapsearch utility to query an AD controller. An alternative would be to im

  • Any shadow created in an iWeb site is pouched with latest upgrade. What happened?

    the latest "security" upgrade that came out in the last week distroys any shadows created for images in an iWeb created site. In the original upgrade to Firefox 5 they were fine. They are still fine in Safari and even work in Internet Explorer. What