Imaq RT Video Out using PXIe-8135

Hi all,
I am planning to get a PXIe-8135 RT controller and have a requirement to display the image out via the DP port. My questions are:
1. The IMAQ RT Video Out does support PXIe-8135, doesn't it? My concern is because the controller doesn't have VGA or DVI but DP (DisplayPort). Will it work the same?
2. PXIe-8135 has two DP's. Assuming the answer to Q1 above is positive, can I display two different images to both of the DP's?
Please advice.

Hi Shazlan,
1- Yes PXIe-8135 RT controller do support IMAQRT Video Out function.
2- I'm not sure if it's possible since the 2nd DP is just an extended display of the 1st DP
Regards,
Laila
Applications Engineer | National Instruments
Singapore (65) 6226 5886 | Malaysia (60) 3 7948 2000 | Thailand (66) 2 298 4800
Philippines (63) 2 659 1722 | Vietnam (84) 8 3911 3150 | Indonesia (62) 21 2924 1911

Similar Messages

  • After using IMAQ RT Video Out, how do I go back to the rt debug string output?

    After using the IMAQ RT Video Out VI, the screen the image as expected. I want to then go back to the console screen where I can see the RT Debug strings and CPU usage. Is this possible? 
    CLD (2014)
    Solved!
    Go to Solution.

    Sneaky I looked at that VI and didn't notice that option. Worked like a charm. 
    Message Edited by InfiniteNothing on 12-22-2008 01:58 PM
    CLD (2014)

  • IPod Touch - video out using older iPod Composite cable

    OK so the running commentary about video output from the iPod touch is a little confusing. It seems that the only video out supported by apple seems to be from their own component/composite cables. The older iPod Photo came with a 1/8" headphone A/V composite cable that allowed me to connect it to my TV for photo slide-shows with a soundtrack. Can I use this same cable to connect the IPT with my TV or am I now forced to purchase the $50.00 30-pin cable? I cannot find anything that is definitive, and I have not tried it yet. After spending a small fortune on the iPod I am not excited about having to buy a new cable...
    Thanks
    Message was edited by: ca_nimrod

    Just the cable - I was using "dock" in the sense of dock connector (which is how the non-USB end is referred to), not the Universal Dock product.
    Here are links to the Apple Store for the component and composite cables. These also include a USB cable for power.
    You're guessing correctly - the USB cable (with the dock connector on the other end) that you use for syncing cannot transmit video from the IPT.

  • Video Output for PXI Embedded Real-Time Controller ?

    I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
    Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
    Does it exist a specific application to do this with LabVIEW RT ?
    Thanx.
    H.L.
    Solved!
    Go to Solution.

    Hi Yann,
    The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
    I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
    Does anyone have the answer ?
    Thanx,
    H.L.

  • I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

    HI All
    I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
    I used IMAQ AVI Read Frame VI
    for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

    Hi abdelhady,
    I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
    There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
    Thank you,
    Emily C
    Applications Engineer
    National Instruments

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

  • My samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio

    my samsung says video out from i pad is not supported. i am connecting with apple dock using hdmi. I do get the audio  any suggestions?

    Jeffrey-
    If the HDMI input to the Samsung is not compatible, does it have a VGA or composite input?  I have both the HDMI and VGA adapters for the iPad, which work with the small Vizio HDTV I tried.  I understand a composite video adapter is also available.
    Fred

  • No Audio When using Video Out to Firewire

    I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
    My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
    Please Help
    Ken

    The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
    Is there a problem with FCE 4?

  • Using Video Out Distorts Desktop Icons

    When I use my video out, the icons on my desktop get moved around. I understand why this happens when the resolution changes to send video out, but why don't the icons restore back to their original locations once I disconnect the video out? Is there a way to prevent the icons moving or to get the computer to restore them automatically? It's such a pain that I avoid using video out even though I could get a lot of use out of it. Any suggestions short of removing all the icons from my desktop? Thanks.

    In Finder, View/Show View Options
    Is 'Snap to Grid' or 'Keep arranged by' checked ?

  • I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Use standard DV Video out for monitring with HDV Project?

    i got a ADS Pyro AV Link fo Christmas and has a composite/S Video out on the back....and connected the composite to a monitor.....and FCE has a video out option in the View menu....and whenever i select it (with an HDV proj.) it goes from the Pyro's standard color bars to a black screen.... wheever i play my project back in the canvas it still is black? whats wrong? or is it incompatibility?

    That's not going to do what you want. FireWire is only for DV material not for HDV that's been converted to the Apple Intermediate Codec. You can output to HDV via FireWire, but only using the print to video function.

  • I need to stream video from itunes to apple tv with out using my 40gb hd.

    i need to stream video from itunes to apple tv with out using my 40gb apple tv can it be done you see i have a 40gb apple tv and it's full and i still have lots more video (movies) in my itunes can i stream movies from itunes to apple tv with my memory full in apple tv??????????

    Select the iTunes library on your computer from the Sources menu in Apple TV and then you can stream. If streaming is not smooth and your router has a multicast setting, try increasing the multicast bit rate. To return to the synced content on your Apple TV, select the Apple TV logo at the top of the Sources menu.

  • Possible to charge iPod while using Video out option?

    I've read that you can use video out while maintaining its charge by simply 'ejecting' the iPod from Windows (but maintaining the physical cable connection).
    But what about using a generic wall charger? Such as this one:
    http://www.amazon.com/gp/product/B0009T81YE/qid=1146811575/sr=8-1/ref=pdbbs1/103-4014541-7815810?%5Fencoding=UTF8&v=glance&n=301185
    Or even using apple's official wall charger? With one of these pieces of equipment is the iPod locked in "do not disconnect" mode? Or is it free to be used?
    I hope someone can get back to me soon! Thanx
      Windows XP Pro  

    using the wall charger does not put up the "do not disconnect" screen. thats only wen its connected to a computer. so yes u can keep ur ipod on charge while using the video out.

  • No video out on TV using Satellite A50-542

    I am not able to get an output from the video out jack on my Satellite A50-542 laptop.
    I have connected the laptop to my TV via a s video cable and an oudio cable via the headphone jack.
    Sound is fine but no video.
    Tried connecting from s video jack to scart input still no joy.
    Can anyone help

    my problem has been solved, Fn +F5 and select the output option required, good picture and good sound.

  • How to use PXI Star Trigger for PXIe-5663 in PXIe-1075 chassis

    HI all,
    I have this sytem configuration:
    PXIe-8135 controller. Windows 7 64-bit, RFSA 2.7.5. NI-SYNC 3.4.1
    PXIe-1075 chassis
    PXIe-5663 (2x)
    PXIe-6672 Timing & Sync Card (slot #10)
    I want to trigger the recording of my Digitizer with an external trigger.
    The External Trigger is connected to PFI0 of the PXIe-6672 Timing card.
    Then, the PXIE-6672 card routes the trigger to the backplane of the PXIe-1072 (Destination "NISYNC_VAL_PXITRIG0")
    The PXIe-5663 are triggered with “NIRFSA_VAL_PXI_TRIG0_STR” as the source.
    The trigger fires my PXIe-5663 correctly, but the timing is not tight (> 5ns).
    I would like to use the PXI Star trigger instead, I think that I should be able to acheive much better synchronization with this.
    But NI-RFSA won't let me do this:
    When I try to call
    "niRFSA_ConfigureDigitalEdgeStartTrigger(rfsa_sess​ion, NIRFSA_VAL_PXI_STAR_STR , NIRFSA_VAL_RISING_EDGE)", I get the error:
    "Specified Route Cannot Be Satisfied, Because the Hardware Does Not Support It"
    I don't understand why the PXIe-5663E would not be able to use that Route.
    Any idea?
    Regards,
    Serge
    Serge Malo, ing.
    Concepteur logiciel
    Software Developer
    T (514) 842-7577 x648 | [email protected]

    That explanation isn't quite right. Usually, even PXIe modules have a connection to PXI_Star. The PXIe standard added the PXIe_DStar trigger buses, and it also preserved the PXI_Star bus from the PXI standard.
    However, there is an additional twist in this situation. I'm assuming that your PXIe-5663 includes a PXIe-5622 as the digitizer. It turns out that a synchronization technique called NI-TClk has eliminated the need for our more recent digitizers to rely on triggering from PXI_Star. I was able to find some documentation that includes this information, here and here. Given that, I think you have two options that should result in better synchronization.
    The first option is to use TClk; I found an example program that demonstrates using TClk to acheive phase coherent signal acquisition across two 5663s. The second option is to use cables of matched length to connect two PFI front panel terminals of the timing board (6672) to the PFI1 front panel terminals of the digitizers (5622). The timing board would accept the external trigger on PFI0 and then issue triggers on PFI1 and PFI2 with around 500 ps of skew (manual, page A-4) . The digitizers would use NIRFSA_VAL_PFI1_STR as the trigger. I hope one of these solutions will meet the demands of your particular application.
    I will also follow up with the owners of the RFSA product documentation to see if we can include a note about why PXI_Star is not supported in some cases.
    James Blair
    NI R&D

Maybe you are looking for