IMAQ spline interpolation shows strange artefacts
Can someone explain the strange artefacts I see when using the IMAQ spline interpolation routine to resample an image? (See the 2 small attached files)
Some pixels get very wrong colors. Is this due to the spline routine itself or is it maybe a bug?
Certified LabVIEW Developer (CLD)
Attachments:
original.jpg 9 KB
resampled.jpg 28 KB
Thanks for the answer,
Manu
Certified LabVIEW Developer (CLD)
Similar Messages
-
MBP shows strange colored images, artefacts
Hi everyone,
since a few days my MBP (2,4 GHz, Summer 2007) shows some strange artefacts on images. I attached a screenshot taken with my camera.
I tried the following to solve the issue:
- reset PRAM
- re-install 10.5.2, re-install graphics update
- change resolution and color depth
During my tests I noticed a few strange things:
- Preview.app is closed, I choose another color profile and open the attached picture, picture is okay
- switch back to standard color profile, picture in Preview.app is still okay
- Close Preview.app, reopen picture --> strange colors
Booting with other Mac in target mode doesn't help
When starting from Leopard-DVD the original Aurora wallpaper is displayed without artefacts but I can't reinstall because I already have 10.5.2 installed.
So does anybody know whats going wrong here? Tips? Suggestions?
Thank you very much in advance!
Alex from Germany
screenshot: http://img229.imageshack.us/img229/9171/dsc00944yr3.th.jpgWelcome to Apple Discussions!
It is very difficult to know what is going on here. It seems to me that if it were a hardware issue, you would have strange colors no matter how you set the color profile. Given that the colors are off in just certain situations, I would suspect a software glitch of some sort. I am not a software expert, so I don't know if there is a good way to fix this short of reinstalling the OS. Even though you have OS X v. 10.5.2 installed, I think you could reinstall the OS by doing an Archive and Install and then updating it back to 10.5.2. You need to have a certain amount of free space on your hard drive to do this, and of course you would want to make a complete backup first just in case anything were to go wrong. And you would want to repair permissions both before and after the A&I.
Otherwise, there are a couple of things you could try. You could run the Apple Hardware Test and see if everything passes. You could also repair permissions using Disk Utility and see if that helps, particularly if you haven't done that in a while.
It's also hard for us to tell much from just one picture. It might be helpful to post a shot of the normal colors next to the strange colors. That might provide better insight to someone. Also, you can use the utility "Grab" to take a screenshot using your computer instead of a camera-- that might also make things a bit better to see.
Good luck! -
Mac Pro 3,1 - freezes, shows strange pixels on screen and then restarts
My Mac Pro 3,1 sometimes freezes and shows strange pixelated objects on the screen and then restarts by itself. Is this a hardware issue or a software issue?
I'm running OS X Mavericks on it and everything is up to date. I have a lot of saved professional audio work on it that needs to be done and I can't afford to get a new Mac Pro. Any please help me out! Thanks a lot.Yes, there was a kernel panic today again.
Here is the report:
Anonymous UUID: 110B0849-80D1-E866-42AC-7049298F1578
Sun Sep 21 23:20:09 2014
panic(cpu 1 caller 0xffffff7f8caa0f30): NVRM[0/2:0:0]: Read Error 0x00070000: CFG 0x061110de 0x00100406 0x92000000, BAR0 0x92000000 0xffffff8187ddf000 0x092880a2, D0, P0/2
Backtrace (CPU 1), Frame : Return Address
0xffffff8186943430 : 0xffffff800c022f79
0xffffff81869434b0 : 0xffffff7f8caa0f30
0xffffff8186943570 : 0xffffff7f8cdb678d
0xffffff81869435b0 : 0xffffff7f8ccebb2e
0xffffff8186943600 : 0xffffff7f8cd61b4f
0xffffff8186943780 : 0xffffff7f8cd5d818
0xffffff8186943870 : 0xffffff7f8cb4566c
0xffffff81869438f0 : 0xffffff7f8ca77f03
0xffffff81869439a0 : 0xffffff7f8ca7cfad
0xffffff8186943a60 : 0xffffff7f8caa59ef
0xffffff8186943c60 : 0xffffff7f8caa75a1
0xffffff8186943d50 : 0xffffff7f8d8727a0
0xffffff8186943db0 : 0xffffff7f8d86f522
0xffffff8186943e40 : 0xffffff7f8d859f57
0xffffff8186943e70 : 0xffffff7f8d8172b7
0xffffff8186943e90 : 0xffffff7f8d8185ac
0xffffff8186943ed0 : 0xffffff7f8d815338
0xffffff8186943ef0 : 0xffffff800c4b0a20
0xffffff8186943f30 : 0xffffff800c4af4c2
0xffffff8186943f80 : 0xffffff800c4af597
0xffffff8186943fb0 : 0xffffff800c0d7607
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f8ca51000->0xffffff7f8ccb9fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8c6bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f8ca41000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8c9fe000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f8ccc4000->0xffffff7f8cf6dfff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f8ca51000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8c6bf000
com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f8 d80f000->0xffffff7f8d8d9fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f8c6bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f8ca41000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8c9fe000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f8ca51000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000000be00000
Kernel text base: 0xffffff800c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 2179512509335
last loaded kext at 296406696192: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8cf93000, size 65536)
last unloaded kext at 368516073398: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f8e0a7000, size 8192)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.motu.driver.FireWireAudio 1.6 60625
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.GeForceTesla 8.2.4
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.driver.AppleUSBHub 683.4.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.BootCache 35
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOSurface 91.1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0 -
Problem with Spline Interpolation
Dear friends,
I've a problem with the Spline Interpolation which returned the error code -20049. I've tried in several ways such as delete the repeat data out, but it didn't work. If anyone can help will be very appreciated.
Thank you so much,
Attachments:
ITH_Calculation.vi 248 KBThe spline interpolation expects your x-values to be all different (and monotonic). However in your data set the x values at index 122 and 124 are identical (and also x(122) > x(123)). If you correct for this the interpolation should work fine.
-
Strange artefacts on 2nd monitor in kdm and while logging in
Hello there,
since about 2 weeks during a upgrade I've got strange artefacts like it's shown in the attachet image when starting kdm and during login.
I have have got nvidia geforce 8600 gt with 2 monitors (17 & 22") configured as twinview and use latest stable kde 4.2.2.
I have not looked excatly which package was updated when this problem appears but can it have sth to do with the updated xorg server 1.6? For anny suggestions I would be galde how I can solve this problem or what the problem excat is... because this looks really ugly.
Thanks for your help!
Frank
http://yfrog.com/76dsc00884jI have the same problem. The most strange thing is that when I logged to another installation where I'm using slim for login and when I come back to main installation with kdm, I saw scratched slim background. I think that is some problem with graphic card buffor or something like that because when I turn off the computer and turn on I don't see slim background when I'm logging using KDM. Unfortunetly I saw another artefacts
I have only one monitor and I have nvidia gf 8800gt. -
CS6: Strange Artefacts in 3D renders - what is causing this and how to fix it?
Hi all
I am creating 3D renders in PS CS6, and I am getting strange blocky artefacts in the renders. These appear on first pass and persist throughout the render. This has happened in the last 2 renders I have tried - I haven't used 3D for a while before this and I don't remember these before.
By blocky artefacts I don't mean the JPG artefacts created by the forum's degrading of the uploaded image, but the light coloured rectangular blocks around the "s",
On Win7x64 with latest PS CS6 update; NVidia 650M\2GB on a Core i7\8GB.
The attached example follows a YouTube tutorial on creating long shadow icons.
Any advice appreciated!
Thanks
RichardBy the way, it might be helpful for you to show the steps that you followed to get to where you are.
What you're showing doesn't really look like a typical 3D rendering. I'm assuming you sheared an extrusion to get that effect, because the type still looks face-on. You must be viewing the object in Orthographic projection, because the diagonals don't converge. Have you disabled all your light sources?
Could you put the .psd file online somewhere for others to take a look at?
This is what I'd expect a 3D extrusion to look like...
I didn't use Photoshop 3D before Photoshop CS6, so I can't speak to the level of reorganization made, though I've read the same comments from others.
-Noel -
IMAQ Find Edge shows straight edge beyond part
Hello
I am working on finding the sides of my simple part with the IMAQ Find Edge tool. To make it simple, I gave my image an extreme threshold with IMAQ Threshold manually set 0 - 230 so My part basically shows up Black against a white background. I set the ROI of the Part from IMAQ Count Objects 2, expanded that ROI by a couple pixels on each corner of the bounding box and input that into my IMAQ Find Edge tool. I have two IMAQ Find Edges, one looking left to right finding all edges and the other top to bottom finding all edges. It took a while, but I have all Straight edges appearing using the results from Find Edge.
What I don't understand is why these lines are longer than the edges of the part sides? I have attached the image to show what I mean. The edges (yellow) are clearly found on the part, but the resulting lines (red) are beyond these points.
Kelsi
Attachments:
Find edges.png 7 KBAlso am I setting up my edge detect functions wrong? I am filtering my image so I only see the object, no shadows. I am thresholding the image to basically outline it. Now I am using the edge detect function to find the edges and it can't seem to find them all. I have an object that I set my ROI about it, and I have the settings for the edge detect on very low to detect basically any edges possible. It still does not consistently see the edges of my object.
Is there a more reliable way to consistently see these edges?
Kelsi
Attachments:
edge detect1.png 874 KB
edge detect2.png 888 KB
edge detect3.png 203 KB -
Strange Artefacts in CRW Files
Hello everybody,
I made some raw images for texturing a 3D Model on a film set. As soon as I opened them in Photoshop or Bridge (tried MAc and windows) the images turned into strange looking colored ones with craaazy artefacts.Have a look... http://sebi.multimediaart.at/CRW_0005.CRW or http://sebi.multimediaart.at/CRW_0020.CRW
Canon eos 300d
thanks
sebiSebi, that depends on when the raw files became corrupted.
Do you still have the raw files on the memory card? If so, it is possible
they are intact on the card, but somehow became corrupted during the
transfer process to your computer (or afterwards, after the copies were
already on your hard drive). You can try re-transferring them, e.g., using a
different cable and/or card reader, and re-opening the copies in Camera Raw.
If you already tossed the data on the memory card ... Do you have other
copies of these raw files (i.e., backups)? If so, try opening the backups in
Camera Raw and see if they're intact.
If this is the only copy of the raw data you have, then I'm afraid you're
out of luck.
I would suggest doing some tests with your camera, card, card reader, cable,
and computer to see where the corruption is coming from. That's the only way
to minimize the chances of it occurring again.
Eric
thanks for the fast answer.
that's right. irfanview is opening the image just in half of the solution and
just in 8bit.
Do you have any solution to fix those images? (i have about 70 of them) -
What can I do, when the viewer shows strangely fragmented images I can't work with?
Good Evening,
I have lately the strange problem, that the images on my viewer in Final Cut Pro X (10.0.8) are heavily distorted.
As you can see on this Screenshot, mostly the image is like split into several channels. Sometimes, is has fragments of some sort of stored graphics from previous projects in it.
perhabs it is important to know, that it is on a second monitor. However it used to work properly before the error started to show up periodically. Now it occurs ervy time i start to edit my footage. It is really annoying and i can't edit any longer. I used to just click on another file and it disappeared for some minutes, but now it stays the whole time.
Hopefully you can help me with this. Is there anyone with the same problem? I can't seem to find anything on google...
thanks in advance.
edit: the screenshot was not uploaded.Welcome to Apple Support Communities
It's possible that your hard drive is damaged. Hold Command and R keys while your computer is starting to start into OS X Recovery. Then, open Disk Utility, choose the hard drive at the top of the sidebar and look at the bottom of the window, so search for the SMART status. What does it say?
If it has failed, make a backup of your data and get a new hard drive. You can use any 9.5 mm 2'5" SATA hard drive with your computer. You can find some at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
Flex UI Layout set showing strange results!!!
Hi All,
I am facing a strange problem with the layout set being used for showing KM folder.
Currently the layout is displaying the same results, rendering the same resources TWICE in the same page with same look. The layout set is using GridListLayoutController and a custom developed Collection Renderer. The custom developed is only rendering a fixed number of resources.
What can be the problem? Please help me.
Regards,
SandipHello Sandip,
The GridListLayoutController would be used for layouts that, for example, would display subfolders in the grid layout above and files in a list format below. It is also used when an HTML Collection Renderer is involved... the HTML file is displayed above, with a list view of the folder contents below. Just depends on what you need.
Glad that worked out for you.
Cheers,
Fallon -
Mocha AE CS6 - Splines not showing so tracking is unavailable
It always seems to be me that has issues with every project he works on. Typical. So, as expected, I'm having issues with my latest project, and the client needs the completed film back fairly soon, so I'm running out of time.
My issue, is that in AE, I have a 2K project linked from a Premiere Pro project. I needed to track some of the footage in Mocha, but since it's an .R3D file, I decided to export a proxy that's a JPEG sequence, just to track in Mocha. The sequence loads inside of Mocha, and I can scrub through the timeline without any issues. HOWEVER, I can't actually track any of the footage. At all. When I click to create a new X Spline layer, and try to add my points on the footage, nothing happens. A layer is created in the let hand box, but nothing shows on the surface and I can't access the tracking options to track forwards or backwards.
As I said, the client is expecting the shots very soon, so I need to resolve this and move on to the next shot ASAP!
Thanks in advance.r3d files are not among the supported file types for the version of mocha that came with After Effects CS6 (11.0). This was added in the version that came with After Effects CC (12.0):
http://blogs.adobe.com/aftereffects/2013/04/whats-new-in-the-version-of-mocha-included-wit h-the-next-version-of-after-effects.html -
Opmn.xml file showing strange path and strange ias instance id
hi every one,
i have installed R12.1.1 on linux X86 platform.
After Installing, everything is working properly. Iam able to connect the application and run reports.
But when the error is coming
when iam upgrading from 12.1.1 to 12.1.3.
while applying 10.1.3.5 patch set, at the time installing the components
iam getting the error showing
"/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/opmn/bin/ons" no file or directory.
so i have seen my opmn.xml file ( /prod_apps/apps/tech_st/10.1.3/opmn/conf/opmn.xml)
the file is showing these strange path
<variable id="LD_LIBRARY_PATH" value="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/lib" append="true"/>
</environment>
<process-type id="IASPT" module-id="IASPT" working-dir="/nfs/bld/d26/PRDXBLD9/apps/tech_st/10.1.3/iaspt/bin">
its showiing the path /nfs/bld/d26/PRDXBLD9
could you please clear my doubt why this file showing this strange path.HI ,
i have some confusion regarding opmn.xml file.
i have seen opmn.xml file in two different locations.
1. first location $INST_TOP/ora/10.1.3/opmn/conf
this file showing the correct variables as per my current environment.
2. second location $ORACLE_HOME(10.1.3 Oracle Home)/opmn/conf/
this file showing the strange variables which are not my current variables.
could you please explain why these two files are showing differnet varibles .
could you please explain when and where these two files are used by the application tier.
please reply me as sooon as posssibe. -
Grabbing images at 60 hz with IMAQ grabber and showing them
Hi all,
I'm programming an application where I 've to show and do some realtime (60hz) calculations on a thermal image coming from a thermal camera through GigE
At the beginning, the program works fast, good framerates, but after a while, framerates start dropping, and eventually will stop.
When I remove the Imaq image viewer (right, I do not work with the external windraw), the program doesn't slow down, but than I haven't any image anymore
I tried with synchronous displays etc, but nothing helps.
Any idea's?
in annex, you have a screenshot of a part of the program.
Thanks
Attachments:
ni screenshot.png 24 KBHello Biebel,
Can you share your actual VI's/code (including subVI's)?
It would be interesting to see what you're doing in parallel in your timed loop.
Are you perhaps building any arrays in parallel or in other parts of your VI?
Is the memory and/or CPU usage of the program increasing with time?
Are there any other programs running in parallel?
What do you exactly mean with "after a while"?
Is this 5 seconds or rather several minutes or hours?
Decreasing the update rate could be a good idea, but in this case I think it could still cause issues.
Especially if your frame rate gradually drops, this could indicate a memory leak.
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo. -
Apple Safari showing strange URL
I was using Safari 6.1.6 just fine earlier today, but then, around 10:50 am 12/22/14, I went to try and look something up on a new page and got these weird symbols: ¿90-]=[]' in the URL instead of my home page, which is Google.com. I quit Safari and reopened it, only to get it again instead of my home page. I clicked on the Home icon and still got the strange symbols. Something corrupted my home page choice. I then typed in the url www.google.com, got the requested page and looked for the issue but got no answer. So, I'm posting my question here. What happened?
I just checked the preferences on Safari for my home page and sure enough what's written there is: http://¿90-]=[]' which I didn't type in there.
When I clicked on the home page button again, it just shows a blank page and those characters in the url; so obviously these don't go anywhere that I can tell and I still have no idea how this happened. I have no way of putting in an upside down question mark on my keyboard, at least not to my knowledge, and my cat hasn't been walking on my keyboard either. This all happened before she woke up from her nap.
I just remembered, yesterday I did a Reset Safari and cleared the cache too. However, I've done that many times before and never had this weird thing happen. I changed the home page preference back on Safari to Google and then closed and reopened Safari and the problem is gone. Still, I'd like to know how those characters appeared in the first place. Is it a bug, a virus, a hack? -
My Adress Book shows strange behavior, cannot search or edit
Hi folks!
I recently updated to Lion, also switched my .me to iCloud. At first everything was perfect, now I am experiencing strange behaviours:
I am starting to add fotos to my contacts because I like the view in Mail.app where the contact fotos are shown in the list of emails. After I added some more photos I cannot search in the address book anymore. Typing a name into the search field and nothing happens. Also clicking on a name an nothing happens on the right side. Absolutely nothing. There's only one entry that does not change and when hitting the "edit" Button, only this one contact is changed. Also this one contact changes when doing a right click on a contact name on the left side.
I did some searches here but did not find anything. What I did was deleting the "AddressBook-v22.abcddb" in the ~/Library/Application Support/AddressBook/ Folder as suggested in some other threads but this does not change anything.
This is really annoying and I cannot use my Address Book which I really need. I have more than 2000 contacts inside and it's essential for my business!
Please help!
Thanks and best, Jochen
Message was edited by: Joo-Chen, typoOK, seems like I can replicate the behaviour:
- repair Disk Permissions
- restart MBP (do not open all apps again)
- after reboot, only the Finder is open
- open Address Book
- click on contact name on the left side, brings details on the right, editing works also -> great!
- click in the search field and type a name
-> no filter of the list or search result appears
- click on any contact left hand side, nothing happens on the right, the last clicked contact before the search remains open
- double click on contact name opens separate window as expected
- no search possible anymore
- no editing possible anymore
-> again repair permissions, and restart and same procedure ...
this is Adress Book 6.1 (1062) on MacBook Pro 17'' with 10.7.2
Maybe you are looking for
-
Collection of Error Messages of un-uploaded records while running RFBIBL00
Hello all, I prepare an LSMW program to populate GL items data using standard program RFBIBL00 with Direct Input method. For instance, I have converted 10 records, among which 5 are valid; 5 get denied due to some reasons. Where exactly can I find th
-
Hello! I must build this POC for a client and the idea is merge XML and XPD files to feed a LiveCycle Output process and create PDF files. I've built the XDP files and the XML to start things, now I need to figure out how to create the process to mer
-
How to integrate BI publisher with Apex 3.1.1
I have installed BI publisher and I have also configured the print server in Apex 3.1.1. But when I go to download the RTF format or pdf or xls format, it does not work nor show any error. is there any way to resolve this issue? Or Please Explain me
-
Installation,Patching and cloning for 11.5.10 on sun solaris
Can anyone guide on complete installation , patching and cloning of EBS 11.5.10 on sun solris environment Sun solaris command reference would be added advantage. Manish
-
Hyperion 11 Installation-Shared Services registration is failed for Essbase
Hi All, Today, i was installing Hyperion 11 EPMA system. Here is my scenario: Installed and configured "Foundation" on one system. Installed "Essbase" products on another system in the same network (Not installed HbNet components). While configuring