IMAQ Upgrade seems to have broken some code
We recently upgraded from the IMAQ 4.0 to 4.5, and some pieces of labview code we wrote have broken. When i boot it up, it gives me warnings like the ones at the bottom. I figure the simplest fix is just to download the old .dll files and overwrite them somehow...does anybody have any ideas on how to do this?
imgBufferElement.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgClose.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgCreateBufList.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionAttribute.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionLineTrigSource2.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionTriggerConfigure2.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSetRoi.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
SessionLookUp.vi
- The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
gswang wrote:
Oops, sorry, actually. I'm not sure what version it used to be, but it currently is 4.1. Is there a way to determine what we upgraded from?
No and those errors are no errors but warnings and as such in fact a bit overreacting. What it says is that a Call Library Node trying to load imaq.dll (which without path means to load it from the one of the Windows standard search paths where the system directory is also part of) has been redirected to load said DLL from the system directory. A rather strange message in fact as those are virtually the same for a properly configured Windows system. Bascially you can ignore this specific warning completely as it informs you of something that Windows will do anyhow, unless you start to copy and move DLLs that were originally installed in the system directory.
What LabVIEW version is that?
Rolf Kalbermatter
Message Edited by rolfk on 08-11-2009 09:00 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
10.4.9 Upgrade Seems to Have Broken Sieve Filters in Squirrel Mail
I upgraded to 10.4.9 (thanks to all of Alex's good advice and excellent help), the upgrade went well after forcing an install of MIME::Base64 and Net::Server.
However, the Sieve Filters in Squirrel no longer work properly. To be exact, it looks like the filters themselves continue to work, but when you use a browser to go to the filter's page, it's blank.
My system has some tweaks due to a BuildSmart install and a few other modules, so this problem may only relate to my server.
Anyway, can someone suggest a place to start in tracking this down?
From the httpd error log:
[Fri Mar 16 12:12:57 2007] [error] PHP Notice: Object of class ContentType could not be converted to int in /usr/share/squirrelmail/class/mime/Rfc822Header.class.php on line 61
[Fri Mar 16 12:51:11 2007] [error] PHP Fatal error: Call to undefined function sqmb_listencodings() in /usr/share/squirrelmail/functions/imaputf7local.php on line 27
[Fri Mar 16 12:51:36 2007] [error] PHP Fatal error: Call to undefined function sqmb_listencodings() in /usr/share/squirrelmail/functions/imaputf7local.php on line 27OK. I fixed the trouble.
Before the 10.4.9 update, I was running SquirrelMail 1.4.9a (I had upgraded using Alex's upgrade instructions at http://osx.topicdesk.com/downloads/). I had used Ian Butler's instructions for installing avelsieve at http://discussions.apple.com/thread.jspa?messageID=660096#660096
However, after the 10.4.9 upgrade, SquirrelMail was back to running 1.4.5.
So, I reinstalled version 1.4.9a and copied the old avelsieve directory from a pre-10.4.9 boot clone back-up I had into /usr/share/squirrelmail/plugins.
After running /etc/squirrelmail/config/conf.pl and re-enabling the avelsieve plugin, all is well. -
Update seems to have broken openbox theming.
I updated about 2 hours ago and it seems to have broken a lot of my window manager.
I use openbox as a standalone window manager and have had no issues so far.
I update every few days and today caused the resizing-freeze issue, so I downgraded the suggested packages which fixed that.
However I have another issue with theming.
Programs such as firefox, thunderbird, thunar etc... all have the correct theme. However I use some gnome programs such as rhythmbox and nautilus and neither of these are themeing correctly as well as terminator and all appear to have the default gnome theme.
I use obconf and lxappearence for themeing normally, however these seem to have no effect.
I've done a fair amount of searching and googling and am now very tired and am going to bed.
If anyone has any advice it would be much appreciated. If I am being stupid in my sleep deprived state please feel free to point it out XD.Hi all. I'm also running Openbox and have done the following so far;
1. Installed gnome-themes-standard. Created a new folder ~/.config/gtk-3.0/; Created the file in the folder "settings.ini" with the following code;
[Settings]
gtk-application-prefer-dark-theme = true
gtk-theme-name = Adwaita
gtk-fallback-icon-theme = gnome
Thanks to the info on the thread here
2. Checked out the post here. Downloaded the tar of Adwaita from this.page and did the usual "makepkg -s" magic and rebooted.
What I'm now getting is nm-applet in tint2 with the dark theme of Adwaita which is great but doesn't really match my dark theme axiomd but it's better than before.
What I'm wondering is how to manage this in lxappearance, change font etc?? If I select the theme Adwaita it's a light theme? Having looked in the directory there is both gtk-2.0 (i think this is the light one?) and gtk-3.0.
I've also noticed that it is affecting rhythmbox; slow to load and the status icon setting in the plugins is missing, so you close the GUI and find the app quits rather than the previous behaviour where it would close but the notification icon would still run in tint2 enabling one click control access to the GUI again.
I appreciate this is obviously a new implementation and will take a bit of time to learn but any tips from those in the know would be great!? TIA.
Last edited by phrac (2011-05-01 11:10:09) -
I was using Numbers this morning -- no major problem except that it didn't properly recover from page view (leaving junk on the right of the table).
This afternoon it seems to have broken. ALL my files, including the one from this morning have mostly blank cells. The contents seem to be there - if I click a cell the contents show up in the formula bar (or whatever it's called). And if I double-click to edit the contents reappear. But then go away again as soon as I finish with the cell.
Some (but not all) of the header cells in Gray Headers style show up, and some are simply a pair of faint white squares at the end of the text string. Check boxes show up OK.
Oh, and if I double click on a date it shows up for editing with the year as 00002010.
This is very distressing. I have a lot of data locked up in Numbers and as of now, all is unusable.
What's going on?Thanks for the help. Actually I should have mentioned that I tried that (I've been using Macs since my Mac IIfx in 1990 so I picked up a few tricks) as well as restarting. The problem remains.
In the meantime I've tried opening my files (remotely) with another machine. No problems. It's local.
Next I'll try reinstalling Numbers, if I can find the disks
Richard -
Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?
If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
1 - Open System Preferences from (Menu)
2 - Click "Network"
3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
5 - You will want to click on the PPPoE tab and you should see this
6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
7 - Once this is uncheck make sure to click "Apply Now"
8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
9 - If the option to " Apply Now" is available again please click this
10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
12 - Make sure all lights are off when unplugging the Router and the Modem
13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin -
I have an early 2008 mac should i upgrade to mavericks have heard some bad reports
i have an early 2008 mac should i upgrade to mavericks have heard some bad reports
I have an early 2008 iMac running Yosemite and I am not experiencing any real difficulties. I did upgrade to 6 GB of RAM, which has helped.
I purchased the RAM from OWC.
Other World Computing -
10.5.6 upgrade seemed to wipe out some application preferences
I had some minor issues after upgrading to 10.5.6. I have worked out most (hopefully all) of these issues. I am just wondering if there is something that i did incorrectly that caused this.
After upgrading to 10.5.6 I restarted when prompted by the software update utility. When my machine restarted everything seemed to be working fine. About 30 minutes later one of my apps was hanging so I decided to restart again.
When my machine restarted I lost my saved preferences in Firefox and Opera (e.g. default home page and whether or not to save sessions). This did not effect more import information like saved passwords or bookmarks. Eclipse (which i installed under ~) was in worse shape. OS X wouldn't even start it up - when i would try to start it a "not supported on this architecture" error message would pop up.
Is this an indication that I did something incorrectly? Or just a random happening?
CarlosHello! It seems I have a similar problem. I upgraded to 10.5.6 a few days ago. Today morning, after turning the computer on from sleep, everything was working perfectly, however after few minutes while I was browsing the Internet with FireFox my hard drive started making "click - click" sound repeatedly, disabling me to do anything with my computer (the colorful spinning wheel appeared; it happened the exact same time when I clicked on a link in a news website). After powering off with holding the power button, I wasn't able any more to log in. I've managed to boot the Installation DVD and DIsk Utility found no hard drive.
After exchanging my hard drive (the old one is definitely broken - I was trying to use an external slot to try accessing it - unsuccessfully) I cannot any more boot the installation DVD. The DVD drive was relatively new, so it shouldn't cause any problems. The DVDs are also fine (no scratches, tried a couple of installation discs...). Holding "C" key for 30 minutes doesn't seem to work either... I only get the grey screen, with nothing on it...
At the moment I'm stuck, because I have the MacBook with grey screen and fans running at the full speed, which does not seem to read DVDs, though I can reset the PROM, as well as, boot it as a target and force-quit the disk with holding F12...
The worst thing is that I lost my data created over the last week... I hope apple will recognize that something is wrong with their update... If I get the bootable DVD to boot finally, I will write an update.
Greetings to everyone with the same problem.
Chris -
Upgrade to Leopard seems to have broken Apple Intermediate Codec
I recently upgraded my Macbook Pro to Leopard (clean install). Before doing so I made a bootable backup on my firewire drive (which I still have).
Prior to the new install I was able to playback files encoded with Apple Intermediate Codec (And the Codec also appeared in the drop down menu of supported CCodecs for export as I have Quicktime Pro). Now on my machine if I playback an AI file I get audio with no video and the CODEC does not appear in the export options.
Is there a simple way to fix this?
I had a look in:
Macintosh HD/System/Library/QuickTime
on both my old backed up OS and the new leopard but could not see the CODEC in either location (is it stored elsewhere)?
Thanks for any help give,
Robon both my old backed up OS and the new leopard but could not see the CODEC in either location (is it stored elsewhere)?
Stored in the root library folder on mine -- i.e., not the System folder. "~/Library/QuickTime/AppleIntermediateCodec.component" -
Lion seems to have broken aspects of AppleScript code. Any suggestions for the following?
The following script works fine on a Snow Leopard machine, but hangs or throws an error during save out on a Lion machine:
=====================
global thumbDrive
global thumbDrive2
global hardDrive
global thePath
global filePath
try
-- The following PowerMate tell informs the powermate device "One button" to set it's light to a slow pulse rate.
tell application "PowerMate"
pop light state
set aDevice to first device
tell aDevice
make light state with properties ¬
{state type:pulsed, pulse rate:0.2, name:"Alert x3"}
end tell
end tell
on error
display dialog "Powermate device not detected." buttons {"Ok"} default button 1
end try
tell application "Finder"
delay 2 -- This delay allows the thumbdrive or volume to fully mount before trying to pull data from it.
set hardDrive to (get name of startup disk) as alias -- Sets hardDrive to disk 0 for error checking
set thumbDrive to (get name of disk 1) as alias -- This sets an alias of the name of disk 1 for error checking
set thumbDrive2 to (get name of disk 1) -- This set the actual path of disk 1
if thumbDrive is equal to hardDrive then -- Checks to see if disk 1 is equal to disk 0 if so we move on to setting thumbDrive to disk 2 in the following try
try
set thumbDrive to (get name of disk 2) as alias -- check for global variables
set thumbDrive2 to (get name of disk 2)
on error
set thumbDrive to (get name of startup disk) as alias
end try
end if
set filePath to POSIX path of thumbDrive2 -- Sets the posix path of the thumbdrive
end tell
-- The following sets and formats the file name to the date and time.
on recordMovie() -- This is a function for actually recording the video and saving it
with timeout of 86400 seconds -- sets the timeout of the session to 24 hours
repeat
set buttonAnswer to "Ok"
tell application "Finder"
set theDate to current date
set y to the year of theDate
set m to month of theDate
set d to day of theDate
set h to hours of theDate
set mi to minutes of theDate
set s to seconds of theDate
set thePath to filePath & "/" & y & "-" & m & "-" & d & "_" & h & "-" & mi & "-" & s & ".mov"
end tell
tell application "QuickTime Player"
activate
new movie recording
present document 1 -- Sets the recording to full screen mode, hiding everything else on screen
beep
display dialog "Press button when you are ready to record" buttons {"RECORD"} default button 1
try
tell application "PowerMate" -- Tells the powermate device to pulse quickly once we start recording
pop light state
set aDevice to first device
tell aDevice
make light state with properties ¬
{state type:pulsed, pulse rate:0.4, name:"Alert x3"}
end tell
end tell
on error
display dialog "Powermate device not detected." buttons {"Ok"} default button 1
end try
start document 1 -- starts recording
set answer to the button returned of (display dialog "Press button to stop recording." buttons {"STOP"} default button 1)
stop document 1
repeat
try
save document 1 in thePath
exit repeat
on error
display dialog "There was an error saving your recording to your thumb Drive. Plug your thumbdrive back in and click ok" buttons {"Ok", "Cancel Do not save"}
set buttonAnswer to the button returned of the result
if buttonAnswer is equal to "Cancel Do not save" then exit repeat -- exit the save repeat
delay 3
end try
end repeat
close document 1
quit
end tell
if buttonAnswer is equal to "Cancel Do not save" then exit repeat -- exit the function repeat
tell application "Finder"
activate
display dialog "Press Ok to record again, or eject to eject your thumb drive." buttons {"Ok", "Eject"}
set buttonAnswer2 to the button returned of the result
if buttonAnswer2 is equal to "Eject" then exit repeat
end tell
end repeat
tell application "Finder"
eject thumbDrive
delay 5
end tell
end timeout
end recordMovie
if hardDrive is equal to thumbDrive then -- This script will run whether a volume is inserted or ejected this if statement kills the script if it was an ejection.
else
try
tell application "System Events" -- The following checks to see if there is more than 500MB of space on the drive, if less than it prompts the user.
set freeSpace to round ((free space of disk thumbDrive2) / 1024 / 1024 / 1024)
set spaceNeeded to "0.5"
end tell
end try
if freeSpace is less than spaceNeeded then
tell application "Finder"
activate
display dialog "You may not have enough free space, you should have atleast 500 MB availble for an hour long recording." buttons {"Eject Disk", "Continue Anyway"}
set buttonContinue to the button returned of the result
end tell
if buttonContinue is "Eject Disk" then
tell application "Finder"
eject thumbDrive
delay 5
end tell
else
recordMovie() -- calls the record movie function if the user chooses continue instead of eject
end if
else
recordMovie() -- calls the record movie function if there is more than 500MB on the volume
end if
end if
try
tell application "PowerMate" -- This tells the powermate "One button" to turn off it's pulse and be dark.
pop light state
set aDevice to first device
tell aDevice
make light state with properties ¬
{state type:steady, brightness:0.0, name:"Alert x3"}
end tell
end tell
on error
display dialog "Powermate device not detected." buttons {"Ok"} default button 1
end try
======================
In Console messages I was finding the following along with error -1708:
.sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
So, I thought I'd change the save line as follows:
save document 1 as "QuickTime movie" in thePath
While this didn't solve the problem, it threw an error and allowed the script to continue with the error dialog rather than hang.
Interestingly, though, the Snow Leopard machine seems to register the same error and yet still manages to save the file correctly.
Any thoughts?
Cheers,
AnthonyUninstall Parallels using the uninstaller that came with Parallels. Remove all third-party peripherals. Then restart the computer.
-
Latest upgrade of xorg-server seems to have broken amule
Hi. Is this the right place to inform this kind of things? If it isn't, then I apologize.
Anyway, I am getting the following when trying to run amule:
[nacho@gurney ~]$ amule
Initialising aMule
Checking if there is an instance already running...
No other instances are running.
HTTP download thread started
The program 'amule' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 600 error_code 11 request_code 143 minor_code 5)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
pure virtual method called
Aborted
[nacho@gurney ~]$ amule --sync
Initialising aMule
Checking if there is an instance already running...
No other instances are running.
HTTP download thread started
The program 'amule' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 1123 error_code 11 request_code 143 minor_code 5)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
pure virtual method called
Aborted
Until before the last upgrade (which included xorg-server, so I suspect it is related), it was working properly.
Thanks!Take a look at:
http://bbs.archlinux.org/viewtopic.php?id=42502
http://bugs.archlinux.org/task/9254?project=1
A downgrade to xorg-server-1.4.90-3 should solve the problem. -
Upgrade seems to have caused bind issues
I upgraded to APEX 3.2 today, and I'm finding some things that broke in my application. The installation of 3.2 went fine, then I switched to the APEX_030200 schema and enabled the APEX_PUBLIC_USER, bounced the webserver, and was able to get in. But two of my applications were missing. They just weren't there. I reverted back to 3.0 and did an export of those applications and re-imported them into 3.2. Now I am going through them and there seem to be a few problems.
I am trying to create a dropdown list as follows:
select ADMIN_USERNAME d, ID r
from APEX_ACCESS_CONTROL
where ORG_ID in
(SELECT ORG_ID FROM ORG_ENTITIES
CONNECT BY PRIOR ORG_ID = MNG_ORG_ID
START WITH ORG_ID = :G_USER_ORGID)
and CLERK = 'Y'
order by ADMIN_USERNAMEThe bind variable is an application variable. If I use a hard value, the LOV works fine, but as soon as I change it out to a substitution variable, the dropdown comes up nulll - no values at all.
PS. I have double-checked, and the session state shows G_USER_ORGID with the correct value (populated on page 1 on login).
I didn't get any errors in the logs during the upgrade. This should work, but doesn't. Can anyone point me at a fix? I depend on these application variables a LOT and this application is mission critical.Sorry, I that application build was the same one we used to import after it disappeared. I've tried three different LOV queries on that page. The one that works is:
select ADMIN_USERNAME d, ID r
from APEX_ACCESS_CONTROL
where CLERK = 'Y'
order by 1This one doesn't work:
select ADMIN_USERNAME d, ID r
from APEX_ACCESS_CONTROL
where ORG_ID in
(SELECT ORG_ID FROM ORG_ENTITIES
CONNECT BY PRIOR ORG_ID = MNG_ORG_ID
START WITH ORG_ID =
(SELECT ORG_ID FROM APEX_ACCESS_CONTROL
WHERE ID = v('G_USER_ORGID')))
and CLERK = 'Y'
order by ADMIN_USERNAMENor does this one:
select a.ADMIN_USERNAME d, a.ID r
from APEX_ACCESS_CONTROL a
where a.ORG_ID in (select ORG_ID from ORG_ENTITIES
where MNG_ORG_ID = DECODE(:G_USER_ORGID,901,MNG_ORG_ID,:G_USER_ORGID)
union SELECT ORG_ID from ORG_ENTITIES
where ORG_ID = :G_USER_ORGID)
and a.ORG_ID > 0
order by 1All three work just fine in SQL-Plus, but the two referencing the global variable don't work in APEX after the upgrade. -
Update from apple software - seems to have broken displays
I have just taken delivery of my mac pro (felt like christmas) - ran through the setup all of 6 minutes (eat your heart out Bill) - ran software update as it popped up to get it up to latest settings etc..
now monitors do not work they flash on and off and display signal not detected every three to four seconds then come on then go black etc.. and it continues
they setup from the base installation was sweet and this only started after the update ran and rebooted
i can't seem to find any detaisl on a rollback feature or after zapping pram and disconnecting everything and rebooting still no change
any ideas
monitors are benq 22" in res 1680X1050 and as i said they were working brilliantly till the update ran
any help appreciated - think it might be re install of system software to get it back to original settingsYou might want to add more details in "Computer Model Information" lines.
Is there any source of interference nearby?
The Mac Pro - does it run on a dedicated line / circuit? UPS and/or line conditioner? It shouldn't be putting a real tax on the circuit, unless it is shared with a lot of equipment. They've been known to push the limits for some.
I've seen more than a couple threads reporting problems with ViewSonic (gladly my LCD VGA is older and seems safe).
Are they running off X1900 Radeon?
Sometimes a system ships and even DIMMs can be loosened, maybe video card needs to be reseated?
Hopefully it is just a loose cable somewhere. -
Mavericks seems to have broken all my adobe programs, can I instal the previous version of osx?
I recently instaled mavericks and the new premier upgrade, there seems to be a permisions issue going on, all of my adobe programs seem broken, the import/ export does not work, dont know what to do, is there anyway that I can re instal snow leoopard? I am loosing money every day I cant edit video.
please helpWhat versions?
Allan -
Firefox update 3.6.15 seems to have broken all addons
Since I update to the most recent firefox (3.6.15), all my addons are broken. In the addon tab, they say that they're enabled, but I can't click on the preferences buttons of any of them. Some of them display a green exclamation point, but the ones that don't are still broken. At the top of the addons tab, it says "Restart Firefox to complete your changes" but if I restart, it still says that and it didn't update them.
I've tried updating several of them manually, but they don't update and they don't work. The addons don't appear anywhere in my browser at all; for instance if it's a toolbar, there's no toolbar and no option to get the toolbar when I right click. If it's a button on my main bar, it's gone, and when I go to "customize" the button is still not available.
I've googled this a bunch and am not seeing anyone with my problem.You might want to add more details in "Computer Model Information" lines.
Is there any source of interference nearby?
The Mac Pro - does it run on a dedicated line / circuit? UPS and/or line conditioner? It shouldn't be putting a real tax on the circuit, unless it is shared with a lot of equipment. They've been known to push the limits for some.
I've seen more than a couple threads reporting problems with ViewSonic (gladly my LCD VGA is older and seems safe).
Are they running off X1900 Radeon?
Sometimes a system ships and even DIMMs can be loosened, maybe video card needs to be reseated?
Hopefully it is just a loose cable somewhere. -
Mountain Lion seems to have broken my multiple-monitor setup.
I have a 6-monitor setup, which has been working fine for the last 5 OSX updates... but now, three primary problerms:
- one of the screens is half-dead. I can mouse to it and the curor appears and moves around, but the screen is otherwise black and nothing will appear on it. I can't even set a background on it.
- my primary desktop space which is 2560x1600 keeps reverting to 1024x768 when I reboot which of course re-messes up the desktop layout.
- in fact, all of the configuration changes with respect to displays get lost with reboot... resolution and screen locations with respect to each other... Agh.
I'm sincerely hoping many others are experiencing the same thing, so I'll know Apple is working on correcting the issue.
.. anyone else?Well, I'll reply to my own message in case anyone winds up here and wonders what to do. Here's what I did... I reverted back to Lion, restored perfectly from Time Machine to where my machine was a few days ago and I'm back in business.
This is the first time ever I've had to revert a Mac OS upgrade, but the simple fact seems to be this is a bug and perhaps an update or two from now I'll try again... once someone else has confirmed multiple video cards are properly supported.
Needless to say, my machine is completely factory parts... the cards came purchased with the computer and I haven't modified anything. None of this wrong driver, IRQ conflict, DMA channel issues and whatever else I thought I left behind when I switched from PC to Mac.
First time for everything, but perhaps Apple missed a QA cycle or two before pulling the trigger on this one.
Maybe you are looking for
-
Updated my I tunes yesterday and now it wont open, please help
updated my I tunes yesterday and now it wont open, please help
-
G4 Cube, External Hard drive, and Darwin oh my!
I was given a G4 cube that was having difficulties booting up. At some point in time someone upgraded the hard drive from 30GB to 120GB...When I first got it, I inserted the OS 10.4 DVD and ran a disk utility, repaired permissions, erased the hard dr
-
I would like to learn how to make an alias for my "Home" page in Adobe Muse.
Currently, my homepage is titled "Home." This works great in the vertical menu at the top of the main pages. It does not, however, work well if someone wants to bookmark my site in which case their bookmark generates the generic "Home." Can I crea
-
How to maintain shifts in workcenter
hello guys could you guys help me in maintaining shifts in workcenter?I know that in grouping you have to define that and then we select it in capacity tab page(capacity header) in workcenter. plz send me the steps to maintain the shifts in
-
HI all, /SAPAPO/ 3 ""Lokale Schnittstelle: 4 *" IMPORTING