Imaq usb palet doesn't appear

Hi all,
Are anybody maybe encounter with problem after installation of imaq usb driver, the usb imaq palet doesn't appear :-(
Outside the Labview I succeed to connect by Vision Assistant but in VI Vision Assistant doesn't see usb camera.
Thank you in advance fore help.
Yan

Hi Yan,
This happened to me also. I have two versions of LabView, 8.5.1 activated and 8.6 Evaluation. I installed the driver like three times but I only tried with LabView 8.6 and no palet appeared. Finally, i tried in 8.5.1 activated and it was fine and working properly. If you have more than one version of LabView, my advice is to check them all and see in which one the palet is visible. Other than that, i can't really think of anything else.
Hope this helps,
Sabin

Similar Messages

Control Design and Simulation palette doesn't appear

I'm using LabVIEW 2009 in Professional License. I've installed Control Design and Simulation Module with its all other required Toolkits. The problem is that Control Design and Simulation palette doesn't appear in the Functions Palette in any VI. Please help me with that.
Adeel Amin
NED University of Engineering & Technology
Solved!
Go to Solution.

If you run NI License Manager, Expand LabVIEW2009>Modules>Control Design and Simulation.Can you verify that you have that directory and what is the color of the cube right next to it?
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

USB devices doesn't appear

Hi
I've installed arch in the last few days, everything is almost fine.
The only problem is about the usb devices (like my pen and mobile modem). The system finds them, but they doesn't appear in /dev/sdX
lsusb shows me that the usb is there, but nothing else happens.
dmesg shows me this:
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: deregistering interface driver usb-storage
lsmod | grep usb
btusb 9768 0
bluetooth 44621 1 btusb
usbserial 27170 0
usbcore 118921 6 uvcvideo,btusb,uhci_hcd,ehci_hcd,usbserial
My user is in storage group.
And i can mount CD and DVD.
If anything else is needed i will post here.
Can anyone help me?
thnaks

if you run
udevadm info
in a terminal and then I just tried on my computer, [rene@ArchLounge ~]$ monitor will print the UDEV - the event which KERNEL - the kernel uevent
KERNEL[1264631862.534890] add KERNEL[1264631862.535070] add KERNEL[1264631862.535281] add KERNEL[1264631862.535306] add UDEV [1264631862.545583] add UDEV [1264631862.545810] add UDEV [1264631862.545897] add UDEV [1264631862.546004] add KERNEL[1264631867.534455] add KERNEL[1264631867.534481] add KERNEL[1264631867.534492] add KERNEL[1264631867.534502] add KERNEL[1264631867.534655] add KERNEL[1264631867.534680] add UDEV [1264631867.534920] add UDEV [1264631867.536591] add UDEV [1264631867.536612] add UDEV [1264631867.536623] add KERNEL[1264631867.537005] change UDEV [1264631867.538299] add UDEV [1264631867.538721] add UDEV [1264631867.538933] change KERNEL[1264631867.540308] add KERNEL[1264631867.540365] add KERNEL[1264631867.540578] add UDEV [1264631867.540589] add UDEV [1264631867.628087] add UDEV [1264631867.668981] add insert a usb drive, what is displayed?
and I got the following:
udevadm monitor
received events for:
udev sends out after rule processing
/devices/pci0000:00/0000:00:02.1/usb1/1-1 (usb)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0 (usb)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/scsi_host/host10 (scsi_host)
/devices/pci0000:00/0000:00:02.1/usb1/1-1 (usb)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0 (usb)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/scsi_host/host10 (scsi_host)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_disk/10:0:0:0 (scsi_disk)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_device/10:0:0:0 (scsi_device)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_generic/sg5 (scsi_generic)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/bsg/10:0:0:0 (bsg)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_disk/10:0:0:0 (scsi_disk)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_device/10:0:0:0 (scsi_device)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/scsi_generic/sg5 (scsi_generic)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/bsg/10:0:0:0 (bsg)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0 (scsi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/block/sdd (block)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/block/sdd/sdd1 (block)
/devices/virtual/bdi/8:48 (bdi)
/devices/virtual/bdi/8:48 (bdi)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/block/sdd (block)
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host10/target10:0:0/10:0:0:0/block/sdd/sdd1 (block)

External usb drive doesn't appear correctly connected via usb to Time Capsule

After using it successfully for months over my home LAN by connecting it via FW800 (and suing filesharing) to a stationary MacBook Pro, I'm attempting to connect a 2 TB Hitachi Deskstar 7K2000 hard drive (in a Rosewill quad-interface enclosure with Oxford semiconductor bridge chip) via USB cable to my third-generation Time Capsule. It is formatted as HFS+ with a GUID partition table.
It appears in Airport Utility and mounts correctly, but none of its folders appears. Have tried two different USB cables with the same results.
Any ideas as to what could be wrong?

So do I. I have a 350 GB Maxtor One Touch external harddrive. When I boot the mac, the drive doesn't show. And if I run the AirPort Disk Utility, it shows by name. But no matter what settings I chose, it doesn't mount and it says "No Disk Found" in the menu.
But here comes the interesting bit: If I turn off the harddrive, and turn it back on again, AirPort Disk Utility finds it. So I think the problem has to do with the harddrive spinning down and going into sleep-mode. For some reason it seems to become invisible to the Extreme-box when doing so. But if that's correct, what the heck do I do about it?

USB drive doesn't appear

Often when I plug my USB drive (Seagate) into the USB port, it does not appear in the Finder. I have to reboot the computer for it to appear. Is there a reason why this happens, and is there anything I can do besides reboot?
thanks
Scott

USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

USB Drive Doesn't Appear Anywhere

This flash drive isn't visible on the desktop, in the finder, in Disk Utility. I know if I eject it by just pulling it out, I will get the message that it may have been damaged. I don't know what to do. Any ideas?

In Finder, Finder menu, Preferences, General, Show these items on the desktop. Put a check mark in External Disks. (And the others, if you also want them visible.)
...in Disk Utility...
If it isn't visible in Disk Utility, then you may have other issues with the flash drive. Have you tried a different flash drive on the same computer? The same USB port? Have you tried the non-mounting flash drive on a different Mac? (Or PC, if it's in a compatible format.) If it's not showing up at all, you may have no choice except to pull it out. If you're really worried, then you can shut down your Mac before pulling out the flash drive. (Shut down, not sleep.) That will ensure that the Mac will close and unmount the drive as best it can.

External USB HD doesn't appear on OSX 10.3.9

Hi everybody,
I use three iMacs, only one updated to Leopard. I use a Freecom 400 Gb HD for Time Machine. Works ok. However, when connecting the HD to one of the other iMacs running 10.3.9 the HD will not mount. Is there a solution to this?
Hans

The Time Machine disk is probably using the GUID partition table. Only Macs running 10.4 or later can mount such disks.
Technical Note TN2166

Usb device not recognised and sudden shut down. iphone doesn't appear itune

Hi everyone.
New to these forums.
I am travelling atm. Just received a new white iphone 3gs 16gb 6 weeks ago as a replacement on insurance from uk.
No previous problems. Yesterday phone suddenly powered off.
completely dead with around 30% baterry charge remaining.
now briefly shows charge icon when pressing on off button.
connect usb charger shows charging icon, disconnect shows not charged.
have left on for several hours and no more charge stored.
connect to pc and sound denotes usb connection, however message appears (vista)"usb device not recognised".
iphone does not appear in my computer or on itunes.
am travelling down through africa for the next 4 months so cannot visit store or post to apple or receive replacemant until return to uk in april.
is this issue fixable?
moved to iphone from ipod 2 click wheel as that was extremely unreliable and crashed constantly.
have had 2 ipods, 1 iphone 3G and this 3Gs. only 3G worked without problems for a year. All other items failed repeatedly within weeks or months.
are apple going to produce a reliable product one day? functionality is great, reliability is less than 3rd rate.
can anyone help as i face 4 months overlanding with no music, translator apps or phone!!!!
desperation creeping in.
jonhough

Hello iphonephan,
Try following the steps in these articles (try them in the order listed below):
http://support.apple.com/kb/TS1495
http://support.apple.com/kb/HT1925
http://support.apple.com/kb/HT1926
Another thing you can try is to import the pictures when that prompt comes up and then delete the pictures on the iPhone (you can also email them to yourself from the iPhone before deleting them). Once the camera roll is empty on the iPhone try connecting to the computer to test.
Charles H.

USB Stick Won't Appear on Desktop or Disk Utilities

Hi there,
One of my USB sticks doesn't seem to appear on my iMac. I have looked in disk utility and it doesn't appear there so I can't format it, and I have plugged it into another Mac and have had the same issue.
My external hard drive still appears and continues to back up using time machine, and I have tried the other USB ports in case one was faulty.
Has anyone come across this? Any tips?
Thanks a lot.

I have plugged it into another Mac and have had the same issue.
It is possible the stick has failed since you are having problems on 2 computers and not getting the correct response from what arthur suggested.

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Can't restore iPod because it doesn't appear on desktop

I connected my ipod to my Mac, it showed up on the desktop but not in iTunes. The ipod window said Do not Disconnect. I waited a few minutes, then chose Eject iPod. I restarted the mac, reconnected iPod using a different FireWire port. The iPod no longer appeared on the desktop, and the Do Not Disconnect warning was still there. I switched to USB connection. No go. I ran Disk Utility Repair Permissions on my HD and restarted.
I've been downloading a lot of podcasts lately, don't know if that's the cause of this problem. I'm using iTunes 7.1.1 and Mac OS 10.4.9.
I found a solution for this problem in Archives, but it's dated 12/05, and I'm wondering if it still applies. Part of the solution says to run disk utility, select the ipod, then select Format. But I don't see Format as a choice on version 10.5.6 of Disk Utility. Maybe what was Format in 2005 is now called something else? Like maybe Partition? Here's the post (by john madson) from 2005:
"i can fix this but you will need a mac let me explain
when the last system update for mac os x tiger came through after you are done installing the update the update says it is optimizing the hard drive well it optimizes the hard drive on the ipod as well and cause the internal drive on the ipod to malfunction but this isn't apples fault this is caused by user error im sorry to say
in order to fix this on the mac
here is what you need
1.the latest apple ipod updater software (will explain why later in this)
2. of course a apple ipod mini usb cable
3. apple ipod mini
4. mac os x panther or tiger
1.start up the mac computer
2. connect the ipod to the computer don't worry if it doesn't appear on the desktop
3.go into utilites by double clicking on the hard drive icon and select utility
4.run disk utility
5.you will notice the ipod will apear in the disk utility program but not on the desktop
6. select the ipod in the left pane
7. select format
8. tell it to format it in a mac os extended partition
9.once this is done you will notice the ipod will apear as a removable hard drive but. do not disconnect the ipod
10. run the apple ipod updater
11.reinstall the latest updated firmware
12.unplug the ipod
13. replug in the ipod
14. you will notice the ipod will apear as a ipod icon on the desktop
WARNING:AFTER YOU FORMAT IF YOU DISCONNECT THE IPOD THIS WILL BRICK THE IPOD WHEN YOU FORMAT THE IPOD USING DISK UTILITY IT ERASES EVERYTHING INCLUDING THE IPODS OS SO YOU NEED TO RUN THE UPDATER IMMEDIATLY TO GET THE IPOD WORKING AGAIN
THE FIRST TIME THE IPOD IS RECONNECTED AFTER RUNNING THE IPOD UPDATER RE RUN THE UPDATER SELECT RESTORE THEN IT WILL FORMAT AND SET UP THE IPOD CORRECTLY
FOLLOW INSTRUCTION CAREFULLYNEXT SYSTEM UPDATE DO NOT HAVE THE IPOD CONNECTED TO THE COMPUTER DURING UPDATE"
G5 Quad 2.5GHz Mac OS X (10.4.9)
G5 Quad 2.5GHz Mac OS X (10.4.5)

One more thing: I reset my iPod (toggled Hold, etc.). It appeared in iTunes but not on the desktop, with the message "If your experiencing problems with your iPod, you can restore its original settings by clicking restore." Which I did. Got a window asking if I wanted iTunes to check for a new software update. I said yes. Got an exclamation-point msg "There was a problem downloading iPod software. The requested resource was not found. "
G5 Quad 2.5GHz Mac OS X (10.4.5)

My ipod shuffle (2nd gen) doesn't appear to be charging anymore

my ipod shuffle (2nd gen) doesn't appear to be charging anymore. Have tried different usb ports, etc. The computer does not recognize it as being plugged in.

I just had that same problem. I also have my iPod touch but i also want to use this for many other reasons... SOMEBODY HELP!!!

Back-up / Retrieve Files from an external hard drive that doesn't appear in Devices

Someone please help!
I am going to write the "history" from my disk utility repair here so that other's who copy and paste into search may find it:
(PLEASE SCROLL 13 ROWS DOWN)
Verify and Repair volume “Your Hard Drive Name”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Keys out of order
Rebuilding catalog B-tree.
The volume could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Ok. I would really love to reformat this disk, but I have stuff on here from film school that I CAN NOT lose
Question:
How would I go about backing-up the disk if the image doesn't appear under devices? I went to the "Restore" tab/button, but I can not choose the hard drive in the first field. I could have sworn my hard drive was formatted for Mac, but I may have formatted it back to FAT32. I know the disk still functions because when it is powered on, it cycles with/without being connected to my MacPro, but after that, it will only cycle if connected (confirming connection). It does run again when I connect the firewire cable. Here is my equipment:
8-Core MacPro 16GB-Mem RAID
MacOSX 10.6.8 | 2 X 1TB Internal HDD
Aug-2008 15" MacBookPro
(That I used the Maxtor-External with mostly)
DEVICE IN QUESTION
500GB Maxtor One-Touch Plus
FireWire 400 6-pin Connection Bus (2 Ports)
Purchased in Early 2008 from Staples
I can fit the back-up on my 2nd HDD in my MacPro or in my other External:
2 TB G-Technology G-RAID External
1 x eSATA | 2 x FireWire 800 9-pin | 1 x USB 2.0
Self Powered DC-IN
I have had a nightmare searching for answers, so any options you might have would be tremendously helpful. I can't lose the data because I have everything I did during film school on there. That stuff is basically what you pay for when you go to film school, you pay to show what you can do and what equipment you have used. SAVE ME FELLOW APPLE PEOPLE!!!! We COMMAND, as well as CONTROL!
-RaphSai

Get Disk Warrior that will repair the problems without requiring that you reformat the drive - $99.00 on a bootable CD. Will not work on a FAT formatted drive.
You will need to use Drag and Drop to save your files by copying them from the bad drive to a good one.
To reprep the drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

External mass storage device doesn't appear in the finder

When I plug either my camera or my iPhone into the USB port I get a message saying 'no camers was found' and the device doesn't appear in the finder. I can see the phone in iTunes and the camera in its own Canon software, but I can't access the device and manage the files via finder. Getting annoying, have to delete stuff off the camera manually one file at a time. Why don't these devices show up in finder? Using Macbook Pro running Lion, iPhone 4 with iOS5, Canon IXUS 100 IS.

Device Not Recognised http://support.apple.com/kb/TS1538

External Hard Drive doesn't appear!

Hey guys,
Wondered if you could help me out with this problem.
I have a Maxtor One Touch III drive and when I plug it in it doesn't appear on the screen. I go to disk utility and can't find it there either.
However, when I plug it into other computers - mac, p.c. etc it shows up.
Initially it did work for me but then mysteriously this problem surfaced..
I've called Seagate/Maxtor and still no luck...
Any idea of what I can try?
Duane Gibson

One option is to connect it through a powered USB hub. The additional power the drive will get from the hub may make all the difference.

Imaq usb palet doesn't appear

Similar Messages

Maybe you are looking for