IMatch issues since Sunday 18/11

Since Sunday's update to Safari and QuickTime my music that I have transferred to my iPhone (4s) using iMatch is very odd. I am finding a lot of artists marked as unknown - even though when you click through the artist, art work and all the tracks are there. Also missing slot if artwork. iTunes is still correct though.
Been into local apple store - genius guy was really helpful but could not solve - we put it down to work going on in the background for iTunes - does anyone have similar issues?
In double trouble as laptop at home is dying and awaiting for new iMac so currently cannot connect phone to iTunes via cable and sync.

Similar Messages

TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

Voicemail issue since i did upgrade

voicemail issue since i did upgrade

Hi there lisapetito,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting voicemail
http://support.apple.com/kb/ts4430
-Griff W.

Performance issues since upgrade

I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
I have also removed TotalFinder and have noticed no improvement and still have the above issue.
Thanks in advance!
Here is my EtreCheck:
Problem description:
slow performance on Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 11, 2014 at 8:51:26 AM EST
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
LED Cinema Display 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:46:22
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (256.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Tablet PTZ-630
Logitech Logitech USB Headset
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Inc. Display Audio
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Iomega HDD unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/StartupItems/SymAutoProtect
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.jamfsoftware.jamf.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.fitbitd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.jamfsoftware.jamf.daemon.plist Support
[not loaded] com.jamfsoftware.startupItem.plist Support
[loaded] com.jamfsoftware.task.1.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[running] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.valvesoftware.steamclean.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
cdn Volume (/Volumes/cdn)
TotalFinder Application (/Applications/TotalFinder.app)
SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
Internet Plug-ins: ℹ️
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
AdobePDFViewer: Version: 10.0.2 Support
Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0
DirectorShockwave: Version: 11.5.9r620 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.0.60310.0 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
Safari Extensions: ℹ️
1Password
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
SymAutoProtect
Symantec\nQuickMenu Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
Iomega HDD [Local]
Total size: 500.04 GB
Total number of backups: 37
Oldest backup: 2014-10-14 14:11:11 +0000
Last backup: 2014-11-11 13:27:48 +0000
Size of backup disk: Excellent
Backup size 500.04 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      36% com.apple.WebKit.Plugin.64
      34% SymAutoProtect
      13% WindowServer
      9% Unity
      4% Activity Monitor
Top Processes by Memory: ℹ️
455 MB Safari
361 MB com.apple.WebKit.Plugin.64
292 MB Unity
77 MB com.apple.WebKit.Networking
77 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.39 GB Active RAM
1.34 GB Inactive RAM
1.40 GB Wired RAM
1.11 GB Page-ins
5.54 GB Page-outs

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Various issues since Leopard upgrade

I have just installed Leopard on a Dual 2.7 G5 with a 500GB Hitachi HDD and 5GB RAM and I have noticed one or two niggling little 'quirks' (I am lumping everything together here, rather than separating them in to more appropriate sections, so that I have a record of everything together).
1) I have an Epson Perfection 4870 scanner which I cannot use to scan directly from applications (for quickness I mainly use Preview) as the 'scan' button is always unavailable (greyed out, not highlighted in blue). This has been an issue since at least 10.4.8, so it's not a problem exclusive to Leopard, but it's extremely annoying nonetheless. As I can scan directly from the Epson Scan software (which is basically the driver) Epson will not assist me further and have directed me to Apple/Adobe/MS, etc., for support. Prior to 10.4.8 (IIRC) I could select 'import' (from whatever application) and it would automatically preview, the scan button would then become available and hitting it would launch the driver software. However, the link between the applications and the driver seems to have been severed somehow/somewhere and it is no longer recognising that the unit has finished its preview in order to make the 'scan' button available for the next part of the process.
In Tiger, I could also scan into Epson's EasyScan application, but have been told this isn't 10.5 compatible.
Does the above make sense...? Has anyone else experienced this - and have you solved it? If so, how?
2) This next bit concerns the Dock. I like to have it hidden along the left hand side of the screen, rather than at the bottom, because I only have a 17" panel and desktop space is at a premium. However, about one restart in five, it's back along the bottom and any icons or folders that I have added to it have gone AWOL.
3) The third issue is a sound issue. I have a Revolution 7.1 card which I understand, from reading a notice on M-Audio's Web site, is not yet Leopard compatible (though the promise it will be "very soon"' though as the last driver release didn't support anything newer than 10.4.6, IIRC, I'm not holding my breath!)
So I have removed the card and plugged my Logitech Z5500s back into the 'on board' card. This was working flawlessly under Tiger (I know because I tested it to make sure, because I knew that the Revolution wouldn't function under Leopard). However, whatever I try, I only seem to hear sound from the internal speaker; I even replaced the optical cable (at great expense - the original was a Belkin Gold Series, and so is the replacement and, at about £35 a pop, it's not a trivial outlay). Everything in the sound sys prefs is completely 'greyed out' so I cannot change it from the internal speaker to anything else. Whilst there is nothing on Logitech's Web site as regards to the Leopard compatibility of any of its products (it seems that it gave up on the Mac a very long time ago; I use a MX510 which was the last of their rodents to have any kind of OS X support and that stopped with 10.4.4, IIRC) I cannot see how a set of speakers, which should work with anything that has the required jack sockets, can be fussy about an OS. Incidentally, I also have a 'dark side' box running XP Home (when I win the lottery, I'll buy a Mac Pro and dispense with it) and they're plugged in there and work fine (via analogue, though, not digital).
I noticed it when I received some CDs that I'd ordered from Amazon the other day and found that iTunes was playing through the internal speaker.
4) The final issue is a networking issue. Under Tiger, I could (though it did take me some tweaking to get it working smoothly) dump things from the G5 on to the Windoze box and vice versa, without too many hiccups. However, Leopard is proving to be somewhat of a challenge, to say the least. I don't know how I managed it, but I did manage to render the machine completely inoperable at one point (it would only boot as far as the grey 'Apple logo' screen and I couldn't open the optical drive to stick the DVD in - a panicked phone call to a friend, who runs his own Mac repair and consultancy business, followed!
I don't understand SMB and AFP (though I do know about FTP). In the Finder, I can see the 'doze box and can send things to it (though should I be connected as 'guest'?) but there is nothing on the Windoze side, save for 'Printers and Faxes'). I have made sure I have permissions set correctly and everything is set up to share (and Windows sharing is on) but there is nothing on the other box at all.
Is it possible to share the main HDD across, or am I limited to this silly 'Drop Box' thing (which I did have available under 'doze at one point, though it was read only and I couldn't change permissions from Leopard because I didn't have sufficient privileges, even though I have an admin account and I could change permissions under Tiger with the same level of 'clearance'.)
4) This final issue is sort of linked with 3) as it concerns what I believe to be erroneous error messages. I was clearing some stuff off a drive I was going to use for Time Machine[1], but I wasn't allowed to delete most of it because 'XYZ was in use' or open in an application. Six reboots later, I was still receiving the same error; strikes me that Leopard's got its knickers in a knot somewhere along the line because the files in question (mainly old Word and Excel docs) were certainly NOT in use as I didn't have either installed at the time!
[1]Though having read the problems people are having with TM (not just here, but on other forums I read/post to) I think I might give it a miss and stick with ChronoSync (just have to wait for it to be compatible).
So, this is actually the second installation, but the problems remain - any help out there?
Sorry for the verboseness of this, but I wanted to make sure that I'd covered everything. I'm almost tempted to reinstall Tigger (but not quite - I like Spaces, and I like the Dock Preview).
Cheers for any assistance, folks!
Fran

Fran, I'm not sure I'm going to be much help for all your problems but I will attempt to answer what I can.
1. Scanner problems - have you tried reinstalling the software? I know you mentioned that the easyscan software is not compatible but it sounds like the driver software isn't in the right place. Optionally another program that you might want to look into is vuescan. I have had good success with the program in the past but I have yet to try it under Leopard.
2. Dock problems this sounds like either a corrupted preference list. But I don't have a clue as to why it might be reoccurring. Have you fixed permissions on your computer since installation?
3. I don't have a clue to figure out how to fix this issue.
4. Networking - As for sending things to the doze box. You don't need to be connected as guest. Just use the username and password that you use when you sign into the windows to sign into the windows box and you should have the same rights as you would as if you were using windows on that computer. Yes it is possible to share the main HDD but it isn't something that I would recommend. What I do recommend is creating a folder where you have both read and write rights to and then use that folder share items across both computers. If this isn't something that is going to work for then at the most I would just share your documents folder. You didn't mention how your trying view information on the windows side you should be able to browse your network and eventually find and see the mac.
4 (part 2) - I would recommend something besides TM, it is designed to recover lost/accidentally deleted files. And isn't really designed for being your complete backup program. Yes, you can use it for that but I would recommend something more robust. Some of that comes down to how you want to define your recovery strategy. Superduper!, promotes themselves as having the ability to boot for your backup drive and being able to almost immediately get back in business. If this is a critical factor to you then I would lean in that direction. If you are just worried about having a backup of critical data files then Chronosync or some other program will work just as well. Also mentioned in your post in this paragraph is a description of "files in use" problems. A couple of things come to mind did you let spotlight finish indexing your drive before you tried deleting files? I've run into a problem similar to this in Tiger when I was deleting files while spotlight was indexing.
One item that you didn't mention was what kind of installation you did when you installed Leopard. If you didn't do an 'erase and install" then that might be something to look into. First back up your computer before doing this. You might also want to run a permissions fix on your drive to see if that helps at all.
HTH
Paul

HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you.

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

Issue since iOS Update with TomTom Carkit

Hardware:
iPhone 4, iOS latest Patchlevel
TomTom Navigation CarKit with integrated Speaker, GPS and Bluetooth connection
I have got the following issue since the iOS Update to 6.x
integrated CarKit Speaker is no longer in use=> After receiving an Email with notification signal the speaker becomes active => Makes the usage of a Navigation Software a little more complicated without spoken notifications
Continuos Bluetooth Connection loss to the dock, sometimes followed by the message: Charging with this device is not supported! Could only be solved with undocking/docking the iPhone => complicated during driving on a motorway!
Some apps are no longer able to start (mostly games for my kids).
Has anyone an idea?

Have you contacted Honda? Is there a firmware update for the car system?
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Sometimes an iOS updates breaks compatibility and y have to air for a firmware update to the car system or iOS update

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

Major iPad 3 WiFi connection issues since 5.1.1 update

Prior to the 5.1.1 update (which ironically was supposed to fix wifi issues), my iPad 3 worked great. Since the update it has been a complete disaster.
Even though it always shows a strong wifi connection, certain apps seem to have no connection while others work fine. Safari usually works ok, although sometimes pictures won't show up - just a small box in the corner. Facebook app always seems to have issues as does Pandora. The biggest problem is the App Store or iTunes which say it cannot connect even though Safari works fine at the same time. Ive tried reconnecting, rebooting, and I even bought a new router since I thought maybe my old one was causing the problem.
Is Apple fessing up to this issue? I have to believe it is a software/firmware issue since before the update everthing worked fine.

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

PDF Preview Issues since 10.6.5 Update

I've noted posts of similar PDF issues since the 10.6.5 update, though not exactly like mine. Since the update some PDF's are not rendering properly.
Specifically no text shows up (though the headers / graphics, underlines and text boxes were there). I forwarded the email to iMac running 10.6.4, and no issues, it reads fine. My iPhone also reads it fine.
Anyone having similar issue? Trying to understand whether this is some over-zealous security thing in the new update (note: I trust source of the PDF in question), since other PDF's can be read with no problems.
Thanks,
Kevin

Thanks LD. Did the repair, reinstall, repair as suggested however the PDF's in question still do not show the written (font) part of the doc. So I investigated further asking the authors how they created their PDF and both were on a cheap (free?) version of Nitro.
So, I think I'll put this issue as solved, since I'm guessing that 10.6.5 just won't play nicely with all PDF creators until the 3rd parties do their own updates.
K.

Problems since Sunday

Feb 14 21:53:11 2012
ERR 2012-02-14T21:53:11Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 21:53:11 2012
INF 2012-02-14T21:53:11Z cwmp: mt_cwmp: session not established, will retry in 30 seconds
Feb 14 21:53:11 2012
INF 2012-02-14T21:53:11Z cwmp: cwmp_session: session completed successfully
Feb 14 21:53:11 2012
INF 2012-02-14T21:53:11Z cwmp: cwmp_session: got envelope, len=-1
Feb 14 21:53:11 2012
INF 2012-02-14T21:53:11Z cwmp: cwmp_session: sending envelope to ACS
Feb 14 21:53:11 2012
INF 2012-02-14T21:53:11Z cwmp: session started event code(s): '4 VALUE CHANGE'
Feb 14 21:43:02 2012
(180262.030000) danube_dsl_ioctl:88: Failed ioctl 290 errno 61
Feb 14 21:42:58 2012
(180258.350000) Admin login successful by 192.168.1.72 on HTTP
Feb 14 21:30:45 2012
(179525.370000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 21:29:58 2012
(179478.460000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 21:29:58 2012
(179478.460000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 21:29:58 2012
(179478.460000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 21:29:58 2012
(179478.460000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 21:29:41 2012
ERR 2012-02-14T21:29:41Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 21:29:21 2012
(179441.430000) danube_dsl_ioctl:88: Failed ioctl 290 errno 61
Feb 14 21:25:24 2012
(179204.760000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 21:24:38 2012
(179158.200000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 21:24:38 2012
(179158.190000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 21:24:38 2012
(179158.190000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 21:24:38 2012
(179158.190000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 21:24:31 2012
(179151.710000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 21:24:30 2012
(179150.340000) danube_dsl_ioctl:88: Failed ioctl 290 errno 61
Feb 14 21:23:23 2012
(179083.680000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 21:23:23 2012
(179083.680000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 21:23:23 2012
(179083.680000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 21:23:23 2012
(179083.680000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 21:23:22 2012
ERR 2012-02-14T21:23:22Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 21:18:25 2012
(178785.890000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 21:18:15 2012
(178775.830000) Admin login successful by 192.168.1.72 on HTTP
Feb 14 21:17:37 2012
ERR 2012-02-14T21:17:37Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 20:58:58 2012
(177618.790000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 20:57:09 2012
ERR 2012-02-14T20:57:09Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 20:56:33 2012
(177473.640000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 20:55:43 2012
ERR 2012-02-14T20:55:43Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 20:36:21 2012
(176261.560000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 20:33:37 2012
ERR 2012-02-14T20:33:37Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 20:27:23 2012
(175723.080000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 14 20:26:33 2012
ERR 2012-02-14T20:26:33Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 14 20:23:27 2012
(175487.040000) RTNL: Received ERROR reply 'No such process' for message type 0x19
this is all im getting disconects all day since sunday inter net lasts about 20 mins at most some times little longer others for about 5 mins any one helppp lol

Recorded events
Time and date
Message
Feb 14 22:47:07 2012
(184107.230000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:47:07 2012
(184107.220000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:47:07 2012
(184107.220000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:47:07 2012
(184107.220000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:47:02 2012
(184102.030000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:47:02 2012
(184102.030000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:47:02 2012
(184102.030000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:47:02 2012
(184102.030000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:46:06 2012
(184046.620000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:46:06 2012
(184046.620000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:46:06 2012
(184046.620000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:46:06 2012
(184046.620000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:45:38 2012
(184018.100000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:45:38 2012
(184018.100000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:45:38 2012
(184018.100000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:45:38 2012
(184018.100000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:45:25 2012
(184004.980000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:45:25 2012
(184004.980000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:45:25 2012
(184004.970000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:45:24 2012
(184004.970000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:44:54 2012
(183974.420000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Feb 14 22:44:54 2012
(183974.420000) danube_dsl_ioctl:88: Failed ioctl 255 errno 22
Feb 14 22:44:54 2012
(183974.420000) danube_dsl_ioctl:88: Failed ioctl 290 errno 22
Feb 14 22:44:54 2012
(183974.420000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Feb 14 22:44:48 2012
[183971.710000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.700000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.690000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.680000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.670000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.660000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.650000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.640000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.630000] mei_ioctl:
Feb 14 22:44:48 2012
[183971.620000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.610000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.600000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.590000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.580000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.570000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.560000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.550000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.540000] meiMailboxWrite:
Feb 14 22:44:48 2012
[183971.530000] meiMailboxWrite:

Issues since update to yosemite

Hello everyone,
I've been having all sorts of issues since updating to yosemite which I am struggling to fix on my macbook.
I've had the mac since 2010/11 and the first thing I noticed after updating to Yosemite was the fan constantly running from the moment I boot the machine and that the icons on my desktop were extremely slow to load up as are any files in the documents folder and finder.
Then watching videos on youtube etc were refusing to play fully. I have since updated to the latest flash player but it is still slow.
I ran the activity monitor and a kernel task file is operating at around 120% all the time.
I have read numerous posts on the internet to try to fix and have upgraded to the latest yosemite, reset the printers and many other things.
Now the trackpad is no longer working and not recognised and now the final straw for me is the keyboard refusing to be recognised at startup. I am currently using a wired mouse and bluetooth keyboard to get around these problems and everything is working fine with these but is a real pain.
Has anyone had any similar problems to the above and know how to sort as this is taking up way too much of my time.
Thanks

What is the exact, complete text of the error message you get?

IMatch issues since Sunday 18/11

Similar Messages

Maybe you are looking for