Imbalances between the dep area values

Hi
We have separate areau2019s for local currency- 01 (INR) and Group Currency- ( 03 ) for reporting purpose. The Group dep area was set up the dependent area of 01. What ever values are posted in dep are -01 the same values are automatically updated to group
dep 03.
But last month we have posted the depreciation in the company codes. After that we have executed the reports at the both area ( 01 & 03 ). Now these dep area are showing the different values in AM & FI at group currency ( USD ). Even the local currency values are updated similarly in AM & FI.. There was no problem in local currcy u2013 INR (dep are-01 ), there is a problem in group currency u2013 USD ( dep are- 03 ).
Why the values are updated differently in AM u2013 FI at group currency- USD only ?.
We have set up different GL accounts for both dep areau2019s
Dep areau2013 01 ( local currency u2013 INR )
Dep area- 03 ( Group currency u2013 USD )
Thanks
Ram

Have a look to the asset value date when you created the posting, I think it takes the exchange rate from that date. For the depreciation it takes the date from the last day of the Month.
How you have setup Specify the Use of Parallel Currencies??? -- Yes
SPRO:
Asset Accounting / Valuation / Currencies / Specify the Use of Parallel Currencies
Have you assigned 03 to Group currency? - yes

Similar Messages

Depreciation for the Dep Area 03 is positive for the month of december

Dear All,
My client has run the Deprecation for the month of Dec 2011 and for only one asset the value in the depreciation area 03 is become positive. Eg; for 11 months value is credit 1000 and in the month of December it has posted as Debit 1000. And the value of the asset has in the deprication 03 is same as 2011 value because dep. is zero.
Please assit me in this case as I its financial year close.
Regards,
Jayraj

Hi Jayraj,
I assume that the DEP KEY might have been changed for the Area 31 to 0000 after running the dep update run for NOV period but before running the DEC dep update run in AFAB/AFABN.
This could be the only reason, where the whole Dep for the year will get reversed.
Ex: You might have created an addtional DEPRECIATION INTERVAL for Dep area 31, where the starting date for the the same could have set to FY start date.
Regards,
Srinu

Relationship between the currenct view value and Memberset value

I have a report with account dimension in the row and time dimension in the col. when I input value 2011.TOTAL in the CV, From the dropdown manu of the MemberSet, the only two value to make the report work is BAS and BASMEMBERS, if I choose other value such as SELF,DEP. the report will display "EVDRE encountered an error occurs while communicating with web server" message.
However, if I input 2011.Q1 in the CV, the BAS and DEP is working which will display all the three month for 2010.Q1., but still not work for SELF.
I remember in BPC M version, all the above scenario is working. we are using BPC NW 7.5 now.
Any idea can share?

jianbai-
Possible cases:
1.The error suggests tht your BPC excel might not be connected t o the server.?
WHen you check your   time dimension in your BPC excel..do   you see your time hierarchy as designed.?
Also try   closing your BPC EXCEL and restarting it from Administration.(Available interfaces).. thus making sure that it is connected to the Server.
2.HOw come your options BAS and BASMEMBERS are displaying the same set of time dimensions.
BAS- displays base members of the CV
BASMEMBERS -   displays all   the base members for the dimension.
DO you have only 2011.TOTAL in your TIme Dimension?
BAS/DEP- will NOT work if you select a   base member in CV-- and ask for BAS /DEP of a base member-
evdre throws an error.
Hope this provides some direction in solving your issue.
-Vm

Error occur while doing Determination the dep. area in the asset class

Hi All
Query about FI - AA
when I m trying to do determine depreciation area in the asset class with following path
Path in IMG
FA- AA- Valuation-- Determine depreciation area in the asset class
By following above path and my Asset class as soon as I select my Asset class and click on depreciation area Tab at left side I m heading with below error:
*"Contact your system administrator (Table error)"*
I don't have De.area 02 in my chart of depreciation and I don't want to maintain it. I just want to maintain Area 01 and 15
expecting expert opinion and feed back,
Thnx
B

Hi,
Please select the Depreciation Area, which you don't want to maintain for depreciation.
And delete the selected depreciation areas.
Thanks & Regards,
S. Umamageshwaran

Does anyone know why the mixed signal graph stops allowing traces to be drag'ed and dropped between different plot areas?

I have a mixed signal graph that allows me to drag and drop my traces between the plot areas, then it stops allowing it.
If I start with a new graph it allows it but eventually stops allowing it.
I have 4 XY charts feeding the one mixed singal graph through a bundle function, then I run it once and drag my traces to the correct plot area
and hope that it keeps working.
Best Regards
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!

Hi Tim,
That sounds like some interesting behavior. Can you reproduce what you were seeing, or have you continued to be able to drag the signals to other plots since you saved and reopened your program?
Jennifer R.
National Instruments
Applications Engineer

Stop Depreciation for a specific Dep Area

All
I am able to stop depreciation for a specific period. My requirement is to stop depreciation for a specific Depriciation Area -01. My client has 4 dep area's (01,02 & ..). Depriciation has stopped in both the depriciation areas (01&02). I had activated Asset shut down and increased the useful life only for Dep Area 01 & not Dep area 02. Both Dep Ar. 01 & 02 use the same Dep Key. Client requirement is Dep has to be stopped for a specific period and specific Dep Area(01). I had stopped dep for a specific period but this has stopped for both the dep area's (01&02)..
Is there a solution to the above. Please let me know if any.
Regards
Sekhar

Check by marking indicator D-Default value from company code and depreciation area in definition of depreciation key in AFAMA.
Thanks and regards
Kedar

Difference between zero and blank values

Is there a way for the system to determine the difference between zero and blank values. One can have a zero allowed for the 0 value to actualy be there in the KF but is there a way that a macro can be written by which we can use the differentiation between the zero ( a value) and blank (no value) in the KF
I have tried to look for an explanation on the service.sap.com and sdn but was not able to find anything.
Thanks in advance

Thanks for your reply. You mentioned something about the "fixing" setting that could make the "0" displayed in the planning book. Could you elaborate?
Also, in the post from user "APO APO" on 5/8, the author seemed to indicate they could see the "0" in the planning book, as quoted below:
"I have already made the zero allowed arrangement for that in the planning area and can see the 0 values in the planning book but I am not being able to make the macro get the results."
I just want to find out if there is any way the user can visually distinguish b/w the "0" and blank values. If not, it'll be very confusing to the users. I understand the macros can distinguish b/w them.
Thanks in advance.

Total calls presented does not match with the calls presented value in CSQ activity report (by interval)

Hi,
We encountered a mismatch details between the call presented value and total call presented value. I attached the report here. If you count the number of calls presented and handled there are 2 calls but why is it the total calls only count 1. Where did the other call go?
I look for some possible related problems but the answer only point out to a bug. The version of UCCX is 8.5.1 SU 3 and the bug was solved in version 7.0.
Hope you can help me with this issue.
Thanks and regards,
Rona

It looks like it may be an issue with the report file itself and not the report data. You can see both calls are shown in the report but the summary information doesn't appear to be calculating correctly. If you have the Crystal Reports Developer toolset you can open the report file and verify that the report summary is using SUM instead of something like MAX/AVG, etc.
Tanner

Deactivation of dep area in asset master data

Hi,
I am trying to deactivate a dep area in an asset.
I could see deactivation check box available in AS03, but when it comes to AS02, I am not able to see the deactivation indicator column and also does not appear if I double click and go inside dep area details in As02.
I check screen layout for dep areas applicable and screen layout mentions deactivation indicatoy is optional.
So how could I deactivate in AS02 now?
Regards,
SKD

Hi Viswa
It is no authorization issue.. It is expected and standard behaviour
You cant deactivate any dep area in the asset master once you create and SAVE.. In the current circumstances,
a. Put a deletion flag in the Asset Master... If any values are posted in it, then scrap the asset w/o revenue
b. Create a new asset and deactivate the Dep Area in it
BR,Ajay M

Deactivation of sp res dep area

When i go to activate only Book & tax dep area only , at that time the Special reserve Dep area get automaticly active by chekout the deactive chekbox autpmatically.
Why ti is like so ?

Hi Viswa
It is no authorization issue.. It is expected and standard behaviour
You cant deactivate any dep area in the asset master once you create and SAVE.. In the current circumstances,
a. Put a deletion flag in the Asset Master... If any values are posted in it, then scrap the asset w/o revenue
b. Create a new asset and deactivate the Dep Area in it
BR,Ajay M

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Country specific Dep Area

Hi All,
If there are two depreciation areas say 01 and 10 and 01 dep. area is my Book Dep area and 10 dep area is my country dep area.
So now when i run the dep posting, should the dep be posted to both the dep areas.
I am aware of how to configure this technically, but i need to understand the process - how do we post the dep in the country specific dep area.
Thanks and regards,
Ankur

Hi
As SAP only one depreciation area can be real (posting) and other depreciation area are normally for reporting purpose. But, we ca have a derived depreciation area which is deemed as real depreciation are which can be posted.
Like
Dep - 01
Dep - 10
Derived depreciation is suppose 51 which (DA-01 less DA-10)
In this case you can deem depreciation area 51 as country specific depreciation area.
Thanks
Colin thomas

Activated dep area not visible in AS03

Hi,
I have create an asset with AS01. Then I activated a deprecition area. When I enterd in AS03 I didn't see the dep ared already activated. If I create now a new asset, I can view this dep area, but in the old one I can't see it. Can anybody tell me how can I see this dep area in the asset created before activating this dep area?
Thanks.
Regards,
Sorin

Dear members of this forum,
please have a look at rules of engagement:
Do not ask for points - This forum should be firstly about information exchange; points are an incentive and a way of saying thanks.
Asking for points is like asking someone to say "thank you": The only time we do this in real life is when teaching a child good manners.
Saying it to an adult is insulting, so why do it in the forums? If someone keeps asking questions without awarding points, simply stop answering them or use the abuse button to report it
Best regards
Horst

Asset values updation in Eco. Dep area 50

Dear All,
I have created one asset for Good will as on 01.02.2010 (go live date 01.02.2010) by using AS91, and i updated APC cost and Acum Depreciation for Dep area 50 - Eco. Depreciation only.
Right now my client want to add some new values (because of wrong value updated at the time of take over values)
How can i do the additions for those assets. i have total 4 Dep. areas but this asset have only one dep. area 50 - Eco. Dep. , more over they run the Dep. for last year (FY - 1st Jan. to 31 Dec.) Please suggest me.
Regards
Radha

Dear Murali,
I have done all those things, and we updated some values for Good Will with Negative sign, but right now we have to add some Negative value in the same asset.
EX: Asset no. 10001
take over values 100000
actual value 250000
Right now i have to add 150000 in that asset
Regards
Radha

Getting unwanted values between the XML tags in XSLT mapping

Hi Folks
I have come across a very strange situation with my xslt mapping.
I am getting unwated values "11" between xml tags
as follows
<Tag>0001</Tag>
11
<DataID>3</DataID>
I am not sure why I am getting these values in between the tags. Any suggestions would be appreciated.

Hi David,
Here is the code fragment where these 2 tags are mapped, FYI, the source is an IDOC message. The unwanted "11" is coming After the <Tag></Tag> and <DataID></DataID>. FYI, Fof the element <Tag></Tag> its a default value. But for <DataID> </DataID> I have the mapping logic.
<Order>
            <OrderHeader>
              <Tag>009</Tag>
              <xsl:for-each select="E1EDKA1">
                <xsl:choose>
                  <xsl:when test="normalize-space(PARVW) = 'WE' and normalize-space(LIFNR) = 'U960'">
   <DataID>
                    <xsl:value-of select="'1'" />
   </DataID>
                  </xsl:when>
                  <xsl:when test="normalize-space(PARVW) = 'WE' and normalize-space(LIFNR) = 'U300'">
   <DataID>
                    <xsl:value-of select="'3'" />
       </DataID>
                  </xsl:when>
   <xsl:when test="normalize-space(PARVW) = 'WE' and normalize-space(LIFNR) = 'U930'">
   <DataID>
                    <xsl:value-of select="'1'" />
   </DataID>
                  </xsl:when>
   <xsl:when test="normalize-space(PARVW) = 'WE' and normalize-space(LIFNR) = 'U400'">
   <DataID>
                    <xsl:value-of select="'3'" />
   </DataID>
                  </xsl:when>
                  <xsl:otherwise>
                    <xsl:value-of select="'1'" />
                  </xsl:otherwise>
                </xsl:choose>
               </xsl:for-each>

Imbalances between the dep area values

Similar Messages

Maybe you are looking for