Imbeded Video has sound, but partial or no video.

After viewing imbedded videos for a time, the video ends up going away, but I still have sound. (So I know it's playing the video.) Doesn't seem to matter what site I'm on, the video ends up as a half screen or less, or black screen. I can shut down Firefox and restart it, and all is well again for a time. I get no error message since the video is playing even if I can't see the video part of it, and I can't seem to find any problems anywhere on the system that would be causing this. Since all comes back to normal with a restart of Firefox, I thought this would be a good place to start looking for a fix.

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Similar Messages

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Ipod Video 80gb with click wheel has sound, but no audio

My ipod video 80gb with click wheel has sound, but no audio. I can hear the clicking of the wheel and selections made through the headphones, but I cannot get music, video, etc. to play audio. I did the 5 R's and installed a new headphone jack prior to posting here. I am all out of ideas and any help would be greatly appreciated.

Can you connect it to an iPod Dock Stereo to check if there is music, coming out, if not the Hard Reset would solve your problem or else the Audio chip has called it a day.
I know you mentioned doing the 5Rs, but did you see the Apple Logo and the language prompt? Sorry, most of the users here, doesn't do the Hard Reset correctly.
Try the iPod Hard Reset -> Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON, then release the button
Select your preferred language.
This wont delete or erase any song/data on your iPod Classic.
See this Apple Support Article on 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

Tv has sound but no picture

My hp tv model # PL5060N has sound but no picture tv is wall mounted

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?
If the problem persists....
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Satellite L750D - Window Media Player has sound but no pictures

I have a Toshiba Laptop Satellite L750D, Win 7 Home Permium. I don't know why Win Media player just has sound but no pictures. Please some one help fix this problem. I don't have a recovery dics. Where can I down load it? I would very much appeciate your help. Hien

Your issue is likely, but not necessarily a corrupted or missing codec since you haven't actually confirmed whether your problem is with just one disc or all discs nor if they ever worked on this system before.
Installing VLC is a good idea, but it's a considerate application and won't tamper or try to repair a busted codec and will more often avoids tampering or accidentally repairing any detected whether it's already working or likely broken like yours. That's one of the reasons VLc is so highly recommended such as they way it was repeatedly suggested to you.
A question to ask if your problem is being caused by a few discs, are they custom burned or commercially pressed boutique films since most mainstream DVD's use the same MPEG-2 codec for video and audio and failed video but working audio is usually a clue about a split format disc that has simpler audio streams but obscure video formats that can result in an issue just like yours.
In either case and if none of that is of interest, I can relate and suggest you keep any installed VLc's and download KLite because it is nothing but varying degrees of CODEC's including obscure ones and is fairly aggressive in detecting and seamlessly repairing corrupted codecs while offering more configuration options than most people want and more than many commercial video applications offer.
Visit http://codecguide.com/download_kl.htm and choose the "Mega" or 64Bit package but 64bit systems can successfully backport the 32bit set if you feel its necessary to.
You can also potentially skip the KLite process by diagnosing your codecs with Nirsofts InstalledCodec tool, a single file executable no install / no reboot but I don't get the impression you're prepared to really do much at that level and that's fine but it might be needless effort in your case.
http://www.nirsoft.net/utils/installed_codec.html
But something you definitely need to stop and wonder about is what happened to crush your codec since they don't normally suffer damage until some insidious piece of badware like your favorite iLivid and mine gets into your computer to raise holy hell forever. If that could possibly be what happened to you, the circumstances of how you managed to pick it up and anything else are things you can keep to yourself but consider it a spyware affliction and one I don't make lightly and is something I rarely suggest since it is the overused excuse at the Microsoft forums to blame everything on spyware instead of poorly written OS code.

My ipad 3 has sound but no picture, what could it be

My ipad3 has sound, but no picture comes up. What can it be?

Press and hold both power and home buttons for about 10 seconds till the Apple logo appears. Then release buttons and wait for your iPad to start

My imac has sound but no picture?

My IMac has sound but no picture? I've tried everything but a hard restart. Anyone else know a solution? Oh by the way, my eight your old son was the last to use it but swears he didn't press anything.

This is the Mac Pro desktop forum. I requested your post be moved to the iMac forum.

Video & Podcast has sound but NO video

When I sync video or podcast to my 30g Ipod, It just shows a small still picture with the title beside it. It does play sound but absolutly no video. How do I fix this problem?

On your iPod go to "Videos / Video Settings".
Then select "TV Out" and either set it to "off" or "ask".
Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

Youtube tutorial video has sound but no vision

I have been trying to see latest PS CC updates tutorials, there is sound but no vision.
OS X 10.9, Safari 7.1.

There don't seem to be any Apple guys about at the moment, and I know very little about Mac systems. I would have guessed it to be a codec problem, but seeing as we are talking about Adobe TV, it is probably using Flash. Try Google with
safari mavericks adobe tv no picture
Which brings up a bunch of hits that mention 'Sandbox Flash in Safari with 10.9'
[EDIT] A lot of the Adobe TV titles are also hosted on YouTube. I think you'd be able to view those directly.

VOB has sound but no picture (gulp!)

Hi
I have transferred a video tape to a DVD and it has come across as five .VOB files.
I can load the last four into Adobe Premiere Elements 7 but the first produces the message 'This type of file is not supported, or the required codec is not installed'. This is trange as the other four work fine. I truied renaming the file to a .mpg file and the same message occurs. When I play the file in Windows media player it play with sound but no picture.
Can anyone shed any light on this please?

Rory,
Good luck with the pass-through on the videocam. That should work fine. The one hesitation that I have is that many mfgrs. omitted pass-through on their PAL models, as most of Europe have a higher VAT on a camera with it. Seems that legally it is declared as being another type of device, and the tariffs were higher. Many NTSC versions of the same camera did have that capability, but the same one for PAL-land did not. Now, many mfgrs. are just omitting it completely, to save $ with that circuitry, especially in light of the PAL tariff issues. Some have found that just picking up a used NTSC version has worked fine - they do not use it to shoot, but only as an A-D bridge with the pass-through. Hope that yours works perfectly, and that it will fill the bill.
As for the OZ whites, I have only encountered one, the Penfolds Yaterna, that did anything for me. In very general terms, I find the whites from NZ much more interesting. Now, I do find them to be great "sippers," but the herbaceousness and the grapefruit notes seem to get in the way with food. Still, a Cloudy Bay SB is such a great Summer wine (in AZ, USA, we need "Summer wines," about 9 mos. out of the year!). I love that grapefruit, though my wife is less a fan. She is also more enamored by a bigger French Chard, than almost any SB.
I had maintained many, many years ago, that NZ was going to be a PN center. That is being realized now. However, I do have to keep looking hard to find them. Some California restaurants are starting to explore them on their wine lists, but with some of the recently developing areas in CA doing some great PN's (Santa Barbara, Santa Rita, Central Coast and Napa/Sonoma in the Carneros AVA), it is a battle - lot of good PN's out there, as soon as one gets over the US$ 25-30/btl. range. I have yet to really see the value of PN's much below that price point. Probably some out there, but they are few and far between.
Here is an ongoing Shiraz THREAD in the Adobe Video Lounge. Here is an older THREAD on PN's from there. Here is a short Syrah THREAD. Some good discussions in the Lounge. In a similar tone, I am in a Photoshop/photography thread on Chowhound. It started with the question - what camera to do food photography. Along the way, one poster came out bashing Photoshop, and then went on to bash Photoshop Elements. I could not let THAT go on, so have been trying to stem the flow of mis-information being spewed in that thread. Now, I am not saying that Photoshop Elements is an end-all, be-all, or that it might not be too advanced for some, but when one basically says, "all I need to do is resize my images, and I recommend that no one buy PS, or PSE," I cannot sit still. Might not be the right programs for that poster, but such negative blanket statements will not go by without a challenge, at least from me. I know that the MOD's are probably watching me closely there, as PS is not really about A camera, though can be closely related to the product from A camera.
Good luck,
Hunt
PS - Steve G. will probably banish me to the Video Lounge for dragging this thread OT, but that happens to me all the time. At least they removed that dusty plastic plant in the corner - the one that they always make me sit in, until I promise to be good.

Mplayer has sound, but Smplayer has no sound?

heya,
I have a Lenovo X200 tablet, with Arch64 installed on it.
I have Mplayer SVN-r31040-4.4.3 and Smplayer 0.6.9 (SVN r3447).
Previously, both of these worked fine, However, recently, after a Pacman upgrade, when I attempted to play a movie, Mplayer seems to play the movie with sound, but Smplayer has no sound at all.
I checked the output from Smplayer:
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family'
Debug: MplayerProcess::parseLine: 'Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'ID_VIDEO_CODEC=ffodivx'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Opening audio decoder: [mp3lib] MPEG layer-2, layer-3'
Debug: MplayerProcess::parseLine: 'AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_BITRATE=128000'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_RATE=48000'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_NCH=2'
Debug: MplayerProcess::parseLine: 'Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: '[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy'
Debug: MplayerProcess::parseLine: 'Failed to initialize audio driver 'oss''
Debug: MplayerProcess::parseLine: 'Could not open/initialize audio device -> no sound.'
Debug: MplayerProcess::parseLine: 'Audio: no sound'
Debug: MplayerProcess::parseLine: 'Starting playback...'
Debug: MplayerProcess::parseLine: 'Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.780000
Debug: MplayerProcess::parseLine: 'ID_VIDEO_ASPECT=1.7793'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.779300
Debug: MplayerProcess::parseLine: '[swscaler @ 0xef5ac0]using unscaled yuv420p -> rgb24 special converter'
Debug: MplayerProcess::parseLine: 'VO: [xv] 854x480 => 854x480 Planar YV12 '
From Mplayer, there's a similar thing mentioned
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [XVID] 854x480 12bpp 29.970 fps 963.4 kbps (117.6 kbyte/s)
Clip info:
Software: MEncoder Sherpya-SVN-r23404-4.2.0
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 854x480 => 854x480 Planar YV12
A: 87.7 V: 87.7 A-V: 0.000 ct: 0.077 2628/2628 10% 0% 0.7% 0 0
Exiting... (Quit)
Any ideas on what's going on?
Cheers,
Victor

heya,
Aha! That worked .
I changed from OSS to Also, and it works fine now.
Any idea why it changed like that? Could an update have caused it?
Also, there were other ones, like "alsa (0.0 - HDA INTEL)" and "alsa (0.1 - HDA INTEL)". Not sure what they were there for.
Cheers,
Victor

Air has sound but no picture

I have a new iMac and apple tv. When trying to use airplay to mirror video using safari on my iMac to apple tv, alI get is sound but no picture. Can I get the picture??

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of comments? You might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

L7300 has sound but no pic!!!

After streaming a youtube video from my tablet for about 2 hrs and then changed to my uverse receiver, my tv just had a black screen with sound but no pic. not the flat dark back but the black screen with some glare around the corners.
can anyone help or l;et me know why this is happening?
thanks
Frank

If you press the MENU button, does the menu appear?
- Peter

Trimmed Video has sound but no picture

I need to split a large video file in two. When I use the trim function and select the first half of the video, it works great. I get a file with just the first half of the video - great sound and picture. However, when I try and create a file containing just the second half of the video, I get sound put a scrambled picture. I've tried trimming as well as deleting the first half of the video and the end result is the same.
Any ideas of how to fix this?

i have the opposite problem as you, video but no sound...

Imbeded Video has sound, but partial or no video.

Similar Messages

Maybe you are looking for