IMCCP3 - Transfer Plan to Project Budget  - WBS Elements

Dear all
Is it possible to execute a similar report as IMCCP3 - Transfer Plan to Project Budget based on a range of WBS Elements. Can a new report be created to allow this. The standard transaction only allows this based on Project.
Thank you
PRG

yes, you could always create Z tcode as you required.
Please make a functional spec and discuss with your abaper.

Similar Messages

  • Transaction Data for Project Definition & WBS Element of Project System(PS)

    Hi all,
       We want to install the Project Systems and the requirement is to report on the following fields:
    Project Definition  (Project Definition   PROJ     PSPID)
    Project Definition  (PS Short Description PROJ     POST1)
    Project Definition  (System Status  CNJ_STAT     STTXT_INT)
    WBS Element         (Project Type       PRPS     PRART)
    WBS Element         (Short ID             PRPS     POSKI)
    WBS Element         (Person Responsible     PRPS     VERNR)
    WBS Element         (Company Code     PRPS     PBUKR)
      R/3 Table Names and Field names are in brackets.
      0PROJECT_ATTR & 0PROJECT_TEXT are DataSources of 0PROJECT Master Data.
      0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT are DataSources of 0WBS_ELEMT Master Data.
      How can I find the transaction data for those above fields, PLEASE ?
      Thanks in advance.

    Hi
    Kindly check the following data sources:
    0PS_CLM_CST ( Costs of a Claim)
    0PS_CSH_NTW ( Network plan payments)
    0PS_CSH_NWA ( Payments on network plan process)
    0PS_CSH_WBS ( Payments on WBS element)
    0PS_DAT_NTW ( Network dates )
    0PS_DAT_NWA ( Dates network operation)
    0PS_DAT_PRJ ( Date project )
    0PS_DAT_WBS ( WBS Element Dates)
    0PS_NAE_EVA ( Progress in Network Activity Elements)
    0PS_NTW_EVA ( Progress in Networks)
    0PS_NWA_EVA ( Network Activity Earned Value)
    0PS_ORD_EVA ( Order Earned Value)
    0PS_WBS_EVA ( Earned Value WBS Element)
    hope this helps!
    best regards,
    Thangesh

  • Report on Settlement - Project wise/ WBS element wise

    Hello Friends,
    I am looking for a report on settlement which will include the senders - Projects or WBS elements and Settlement receivers and the amount settled in the any period for a particular fiscal year.
    Your response will be rewarded.
    Vishal.

    Hi,
    Pls refer CJIC and CJID.
    Regards,
    Amit

  • How to find the Project and wbs Element System Status

    Hi all,
      How to find the Project and wbs Element System Status.
      We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
    Regards
    Raghavendra

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • Project setup, WBS element mgmt, user status, settlement

    What is Project setup, WBS element mgmt, user status and settlement

    If you are after the definitions, the simplest way would be to go to SAP Help.
    If you're after the transaction code, it's CJ20N which is the Project Builder screen.

  • CJ20N: handle Z table's related to project and wbs element

    Hi there,
    The requirement is to handle Z table for project and wbs element.
    Example:
    ZTAB1 has fields: pspnr | field1 | field2 (for projects)
    ZTAB2 has fields: pspnr | field3 | field4 (for wbs element)
    I found an enhancement that can read z table into internal table, i read it into screen and no problem.
    I use it for wbs element too.
    The problem is when the project has several wbs element's in tree, and the user navigate and change them.
    I can't control the data in internal tables, since the user is swithcing.
    How does the standard sap control the memory from each wbs element and project?
    How can i read and save it separatelly?
    Thanks in advance,
    Edited by: orgasmics on Nov 22, 2010 9:37 PM

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • Extract in a file all deleted PROJECTS and WBS element

    hello everyone,
    i need  to create a file wich contain all projects and wbs element  deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
    please help.
    thank you.

    hello everyone,
    i need  to create a file wich contain all projects and wbs element  deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
    please help.
    thank you.

  • Project stock (WBS element) not consider in QA07 Transaction

    Standard SAP transaction QA07 for Deadline monitoring of batches not
    considering project stock (WBS element) for the same
    Kindly suggest for your possible solutions as we are going to fully equipped with
    project system and its stock must be
    considered for background scheduler of recurring inspection
    Waiting for your kind and immediate action
    With Regards,
    Kunal Sheth

    Hi!
    We regret to inform you, that the report RQAAAS10 ( QA07 ) does not             
    support project stocks.                                                                               
    For better understanding of the transaction QA07, I would ask you kindly        
    to review the documentation for the report RQAAAS10.                                                                               
    Here are the Requirements for this report:                                                                               
    'The batch master data corresponds to the selection conditions.                 
    Only those batches that full fill the following conditions are examined:                                                                               
    -the batch status is "released".                                                                               
    -the unrestricted-use stock is greater than zero.                                                                               
    -the stock is not in a HU storage location'                                                                               
    This means that all 'special' stock locations, like for example project         
    stock, will be not relevant for this transaction.                                                                               
    Unfortunately SAP not able to provide a workaround for your                  
    issue, with the exception of a customer own development. In this case           
    you can copy the report and make the correspondent adjustments needed.          
    Best regards
    Erika

  • Locking of  the Project and WBS Elements at a single step.

    Hi Experts,
                    My client requirement is to lock the complete project and wbs elements so as not to allow any further postings to the project, I knew that we can lock the project or WBS individually by setting the lock status, but i want to lock the complete project  at one step, Is there any possible standard setting to sort out my Issue if not give me the solution.
    Thanks & Regards,
    RAM.

    V RAM PRADEEP REDDY wrote:
    it is possible to set a lock for Project Definition & WBS Elements at a single shot or not.
    >
    >
    may be the below explanation will be helpful.
    You can open the project in CJ20N for example and can set the lock for project definition and also you can set the lock for WBS element without saving and exiting from CJ20N, after setting the lock for both project definition and WBS Element you can save and exit.
    It is not possible to select more than one object and set lock with one click.

  • Plan and Actual at WBS Elements without activities

    Hi Experts,
      I am in need of a small help from you. My scenario is like this:
    I have equipments/material as WBS Elements( Level1,2...). I have no activities/materials.
    I planned the costs using CJ40 and Budgeted using CJ30 and confirmed all the WBS Elements by entering actual dates for the same.
    Now i want to see planned/actuals costs in report. When i checked in one standard report it is showing 0 for both planned and actuals.
    I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards,
    Suresh.D.

    The following is in answer to
    "I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement."
    Most probable scenario would consist of following steps
    Create PDef - Create WBS (either copying from template or manually) - Plan costs - Roll up planned costs - Budget (at top level) - Budget distribute - budget Release - WBS release - Post actual costs - run cost / revenue variance report - settle costs against the WBS - TECO project - Close Project.
    I believe I haven't missed on any important aspect.
    Would appreciate inputs from others in this effort.
    Hope this information was useful.
    Regards,
    Pradyumna

  • CJ9B - error message when copy locked project or wbs element

    Dear Expert,
    Tcode CJ9B is for copy planning wbs element/project and every month i need to unblocked all the project or wbs that not use (locked) one by one to make CJ9B able to run without any error.
    Is there any way to do mass change on wbs element or project as i unblock one by one in tcode CJ02?
    Please advice what is different between CJ9B and CJ9F? Is it same doing copy planning wbs or project?
    regards,
    ng chong chuan

    For the locking and unlocking you can use CJ20n  -->WBS element overview instead of the CJ02 so, you can make mass locking and unlocking of WBS  all the WBS elements of project atleast.
    CNMASS tcode is for the mass changes in PS but same will not work for hte system status change.
    One workaround is that you write BDC via SHDB txn and user that BDC to change the status of all the WBS for which you wanted to  lock/ unlock .
    You can also use LSMW also.
    Regards
    Nitin

  • Appropriation Request Plan Info Copy to WBS Element

    Hi,
    I understand that the Plan information specified in Appropriation Request will be copied into WBS elements specified in Measures/Assets section.
    I would like to confirm if this happens for both cases below:
    - If I put exisitng WBS element under Measures/Assets section (will this overwrite my original plan for WBS element?)
    - if I create a new project via Appropriation request, will the plan of the AR be copied to my WBS element (which means I will see updated plan if I check CJ40)?
    Thanks!
    Regards,
    Vivian

    Please check the below specified link, which is very much similar to u r requirement
    http://help.sap.com/saphelp_46C/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.htm
    Regards
    Suresh

  • BAPI's for creating of Project and WBS elements in SAP system.

    Hi Guys,
                 I was able to use a Wrapper FM for creating the
    We have a FM which combines 5 different BAPIs
    FM/Wrapper: "Z_LEED_PROJ_WBSELEMT_CREATE"
    1)      BAPI_PS_INITIALIZATION
    2)      BAPI_BUS2001_CREATE
    3)      BAPI_BUS2054_CREATE_MULTI
    4)      BAPI_PS_PRECOMMIT
    5)      BAPI_TRANSACTION_COMMIT
    Requirement: To automate the process of creation of Project and WBSE(Tasks) and create an entries in the PS tables based on the user inputs from the user interface in Visual Composer.
    Basically user should be able to create the Projects and WBSE.
    Issue: We were able to create the Project with the FM (BAPI_BUS2001_CREATE) but having the issue with the creation of WBSE(Tasks), the user will be entering the inputs for Project Definition, Project Profile and WBSE which are to be created in the UI.
    The problem is we are not able to create the WBS elements using  BAPI     BAPI_BUS2054_CREATE_MULTI .i will send u the code below .Can anybody correct
       CLEAR it_return.
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition-project_definition
        TABLES
          IT_WBS_ELEMENT = it_wbs_element
          ET_RETURN = it_return.
      APPEND LINES OF it_return[] TO et_return[].
    Thanks,
    Gopi.

    Hi Ramiro,
                   This is the entire FM code which is below.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_PROJECT_DEFINITION) LIKE  BAPI_BUS2001_NEW STRUCTURE
    *"        BAPI_BUS2001_NEW
    *"  TABLES
    *"      IT_WBS_ELEMENT STRUCTURE  BAPI_BUS2054_NEW
    *"      ET_RETURN STRUCTURE  BAPIRET2 OPTIONAL
    *"      EXTENSIONIN STRUCTURE  BAPIPAREX OPTIONAL
    *"      EXTENSIONOUT STRUCTURE  BAPIPAREX OPTIONAL
      DATA: it_return LIKE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE,
            v_error TYPE boolean VALUE IS INITIAL.
      CLEAR: et_return, it_return.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
    Do checks for creating project definition
      CALL FUNCTION 'BAPI_BUS2001_CREATE'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition
        TABLES
          ET_RETURN = it_return.
      APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
    Do checks for creating WBS elements
      CLEAR it_return.
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          I_PROJECT_DEFINITION = i_project_definition-project_definition
        TABLES
          IT_WBS_ELEMENT = it_wbs_element
          ET_RETURN = it_return.
       APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
      CALL FUNCTION 'BAPI_PS_PRECOMMIT'
        TABLES
          ET_RETURN = it_return.
       APPEND LINES OF it_return[] TO et_return[].
      LOOP AT it_return.
        IF it_return-type CA 'EAX'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          v_error = 'X'.
          EXIT.
        ENDIF.
      ENDLOOP.
      IF v_error = 'X'.
        EXIT.
      ENDIF.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT = 'X'.
    ENDFUNCTION.
      can u please look at the code and let me know the changes?
    Thanks,
    Gopi.

  • Settlement of Project through WBS Element

    Hi
    I tried to execute the transaction code CJ8G for settlement of WBS Element i got the following error
    You cannot use this transaction type to post to this asset
    Message no. AA834
    Diagnosis
    The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
    The asset to which you are posting belongs to class 440000 (chart of depreciation LILK). You cannot post to this class using the transaction type you have entered.
    Procedure
    Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
    Please advise the solution for the aforesaid error
    Thanks and Best Regards
    Shekhar Yecham
    Edited by: Shekhar Yecham on Sep 16, 2008 7:45 PM

    Hi Shekhar
    In order to settle project to Asset you have to ensure that you have an asset class  which has a tick for investment measure.  once you create an asset class which manages investment measure , you should be able to that particular asset class. you can then further settle asset from this asset class to any other asset class.
    hope this help you
    thanks
    sanjeev

  • Creating projects and wbs elements

    I am running a conversion and for the upload portion I need to create projects and the relevant wbs elements in the system.  I have been looking over the forums etc and have seen many notes regarding BAPI_BUS2001_SET_STATUS, BAPI_PROJECTDEF_CREATE, and BAPI_PROJECT_MAINTAIN.
    My problem is this.
    I need to update the APPR and PREP system statuses of the projects I create and I can find no way to do this with a BAPI.  I also need to update the location of the project (stort) and the only BAPI I can find that will allow me to do this is BAPI_PROJECT_SAVEREPLICA which seems incorrect to use in this manner.
    in short:
    How do I update project system status of PREP and APPR?
    How do I update project location (stort)?
    Having no luck finding solutions so any help is appreciated.

    Hi,
    I've used these BAPIs but not for your fields. But maybe I can help you. There is no field LOCATION in the project definition but there is field LOCATION on WBS level. So have you tried to change this field on all WBS elements for your project?
    Unfortunately your system statuses are not supported by this BAPI. All supported statuses are mentioned in BAPI documentation. There is a FM STATUS_UPDATE_PROJECT which might help you but you need to be careful what you do. There are some additional FM STATUS_* for generic object status modification but again, you have to be sure that you can set up that system status without any additional checks.
    Good luck

Maybe you are looking for