Imeassage activation error for ipod

I recently upgrades the operating systems on the kids IPODs allowing I message but keep getting I Message Activation Error please retry.  I have a WI-Fi connection working, not sure what else to try?

You can try here:
Can't Activate FaceTime
However, I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

Similar Messages

  • DDIC Activation error for SAP HR SP 23

    Hello,
    We have installed ECC 6.0 SR3 with DB2 as database and HP UX OS.
    When I am updating HR Software component to SP23, it gives an DDIC Activation error. After checking the logs, "Table Type HRPP_T_PPDIT_HASH could not be activated" was displayed.
    Did a consistency check on table PPDIT, which said it was consistent.
    Kernel level is latest 185. R3 trans and Tp is also latest.
    Kindly help.
    Regards,
    Sagar

    Hi
    Please check the following SAP Notes
    Note 672651 - OCS: Known problems with Support Packages in Basis Rel.6.40
    Note 573044 - Unicode conversion for HR application
    Regards
    Chen

  • Activation error for the extractor 0fc_bp_items.

    Here is the error message that i am facing while activating the data source. 0fc_bp_items.

    Hi Ram,
    Thanks for the quick turn around as i can see at the source level that.

  • Webpage error for iPod software update

    For months now, my iTunes has asked me if I wanted to update my iPod software. Every time I tried to do so, I would receive an "error on page" message from their web site. Finally, I quit trying to update the software since everything was working fine. Now, I've updated my iTunes to the new 5.0 and get a new message that some of the songs could not be updated to my iPod because my iPod software is too old and needs to be updated. Ok. That seems logical. But, I still get the same message when I go to their web site ... "error on page". I've looked everywhere possible for another way but can't find one. I also haven't found a way to actually send Apple a message asking for help.

    I have had the same issue for a couple of months and have tried different computer and still get a message that says "error on page"

  • Help, Recovery/Restore error For ipod touch 2g

    Hi, im hoping someone can help my because I really dread sending it away.
    I've had my ipod for a total of seventeen days +(touch 2g 8gig),+ and yesterday when I plugged it into sync to the computer it was showing no music on it and about 4 gig of "other". After this, I disconnected it and checked on my ipod and I had seen that all my music was erased, and I couldnt find the 4 gig of other?
    Anywho, I decided to restore it to its original settings.
    Shortly into the restore I get an error message(14), and after I get this it booted into recovery mode and says I must restore before I can use it, but the problem is everytime I try to restore I get the same error message.
    I have tried all the steps on the support page for error codes and still nothing.
    I'd really like to resolve this and not have to send it away.
    Any help would be greatly appreaciated
    Thanks

    FINALLY someone with the same problem as me. Exact same, and still unsolved...
    I got the iPod Touch 2g 8GB on the 27th of December and on the 25th of January, I plug it in to Sync more music, and it says I have approx. 4gb of 'other', then my music was all gone...
    I have tried update and restore ATLEAST 50 times by now and Soon, I'll give up hope and send it away. I even try the Shift+Restore method (I use XP) and get either error unknown (1) or error unknown (5) when i try it in DFU mode.
    I hope someone helps solve our, as I love the iPod Touch.
    Any help would be appreciated.
    P.S, I have NOT tried to jailbreak it.
    Message was edited by: YIFF666

  • 'Activation error..' message when uploading rules for multiple territories

    Hi All,
    When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
    The create_rule() and save_rule() methods of CL_CRM_FDT class and FM  CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
    Kindly suggest some ways to unlock or any other alternatives.
    Thanks & Regards
    Jagathshree

    Hi Leonie,
    Thanks for your reply.
    Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are  around 1-3 mb each and  72 ppi. I think  I will now scan them properly with a scanner to 300dpi anyway to improve quality.
    Apple  talks about image files not being too big for uploading but gives no sizing of what too big is?
    Error message
    1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
    2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
    3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

  • What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
    “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
    Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again.

    The error
    Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
              Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.

    Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
    “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
    Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • My iPod says it needs to be activated and then says Activation Error, also won't connect to iTunes. Help?

    My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday

    You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
    iOS 7 Developer forum- Apple Developer
    Otherwise you are on your own
    PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

  • My ipod touch 5th gen is stuck on activation error, how do i fix it?

    My ipod touch 5th generation is stuck on activation error and I got this for Christmas so I don't know what the ipod developer program is! please help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • ICloud Error! The maximum number of free accounts has been activated on this iPod touch.

    This is seriously annoying, I've been going around in circles trying to get my music onto my bloody iPod. I can't sync because it pauses @ Step 4: Waiting for changes to be applied error for ios7 devices. So my only option is to use iTunes Match and pay 40 bucks for it, but I think for iTunes match, you also need an iCloud account. Well I can't! Because when I go to sign into my iCloud using my Apple ID, it pops up with this error: The maximum number of free accounts have been activated on this iPod touch.
    I'm about to give up and kill every one of Apple's employees.
    I'm ready and open to everyones strategy at getting this fixed, thanks in advance.

    So I go to make a new Apple ID, then go to my newly downloaded iCloud Control Panel for PC, and it says that this is a valid Apple ID but not an iCloud ID. I figured the only way to make an iCloud ID is to make an account on my iPod... BACK TO THE START! I can't because it gives me an error after I have created my account saying: "This device is no longer eligible for creating a free iCloud account"
    WHAT IS GOING ON, fix your stuff Apple.

  • HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

    When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade.

    Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?

    I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

  • How fix error 2009 on iTunes for iPod touch 3G

    Hello, I tried a several times restore the iPod but always appear this error message, I have the newest version of iTunes but problem continue. Somebody have any idea to restore this kind of issue?
    After this error the iPod is flashing and appear the apple icon on screen. I need to use DFM mode turn off.
    Thanks in advance!
    SquallFNX

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you're using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that doesn't resolve the issue, try the USB issue-resolution steps listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.

  • I get error 5002 when trying to buy 3.1 software for iPod touch 1st gen

    I get error 5002 when trying to buy 3.1 software for iPod touch 1st gen. 

    That is a paid update you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Maybe you are looking for

  • Adobe Acrobat hangs when opening PDFs even after reinstall

    Hello, I have 2 new Dell systems that are having issues with Adobe Acrobat.  When opening PDFs, either from an email attachement or file from our server, there is a brief hang that lasts 10-15 seconds, during which Acrobat is unresponsive however the

  • Content conversion sender multi levels

    hi, i need to map a flat file to this structure: header : 1..1 item: 0..unbounded item_header : 1..1 item_data:  0..unbounded field1 : 1..1 field2:  1..1 field3 : 1..1 footer: 1..1 how can i achive that with content conversion and what should i write

  • Links on Homepage doesn't work.

    Hello, I created some homepage on a R3 backend linked to an iview on a producer. The iview is then remoted in a federated portal role. With some test user, the links in the homepage works correctly. But when I login with my user (which has several ot

  • Physical inventory tables

    Hi, Can anyone let me know what is the table for physical inventory which are carried out for warehouse. I want to know the table in which my before count  and after count results gets posted. Sunil

  • Best PSU for PT880 running Prescott

    Any thoughts?  Basically it comes down to these things: 1. Price 2. Wattage 3. Sound (kinda want it quiet) Are there any that are cheap enough that have extra power in all the rails?  I only got a 380W but it runs.  Cept I built this computer to get