IMEI changed to default value, what do I do?

I bought officially unlocked iPhone 4 in NY.  After two months of use, on the day Steve J passed away, IMEI suddenly changed. IMEI default value indicate hardware issue, but there is no advice what I should do.  I talked with Jim, Senior iOS Adviser, but he could not figure out and said he asked Activation Engineer for advice.  He never comes back with response.  I do not know what I should do.  I am on mission in Kazakhstan and there seems to be no technial support locally. Anybody know what I can do to find a solution?  Forcefully change IMEI?
<Edited By Host>

You need to sign out completely on all your devices and then sign back in with the new ID. On a Mac, System Preferences>iCloud and click 'Sign out'; on an iOS device, Settings>iCloud and click 'Delete account' (this will not delete the account from the server).

Similar Messages

  • How can I change the default value of a command ?

    I want to be able to change the default value of a comand when the vi
    is running. (I know how to do that with a right click when the vi is
    not running).
    In fact I would like the user of the vi to be able to choose a new default value for a command.
    How can I do that ?

    You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
    Try to take over the world!

  • Xnet change signal default value

    Hello,
    I let a schedule table run on a PCI-8516. I want to change specific signal values during run, and I don't know, which would be the best solution.
    The changed signal value has to be sent until I programmatically change it again. And, changing the value of another signal in the Frame should not change the other signal which I wrote previously.
    Following things I tried:
    1. Creating a Frame Out Single Point Session, upon change of a signal change the entire payload of the frame. Here my problem is that I can't write only one specific frame, but I have to write all the frames in the schedule table.
    2. Creating a Signal Out Single Point Session, upon change of a signal value call the XNET Write.VI Signal Single-point instance, and write all the signals (array of double), with the changed value on the right array element. With this solution I have to keep track on all changed I do on the signals programmatically. Is it possible to change the default value (through the property node of the signal) of a signal? I tried to do it, but the next time I read this property node, the value seems unchanged. I just read the original default value from the LDF, without reloading the LDF.
    Any help is appreciated

    Dear Madottati,
    Could you please post the LV-Code what you are exactly trying to do.
    Kind Regards,
    Oleg| Applications Engineering | National Instruments | NIG |

  • How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

    Hi,
    How to Change a Default Value from 'High' to 'Low'  in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component.  I saw a Default Value set for a RANGE field  in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
    I appreciate your help!
    Thanks,
    Monica

    hi,
    use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
    // u can use the code wizard( control +f7) this code will be auto generated when u select the
    //radio button to read the context node
    DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
      DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
      DATA ls_cn_node TYPE wd_this->element_cn_node.
    * navigate from <CONTEXT> to <CN_NODE> via lead selection
      lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
    * get element via lead selection
      lo_el_cn_node = lo_nd_cn_node->get_element(  ).
    * set single attribute
      lo_el_cn_node->set_attribute(
          name =  `ATTribute name.`
          value = 'LOW' ).
    it will solve ur query ..
    also refer to this component
    wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
    regards,
    amit

  • Changing of default values on the selection screen dynamically

    Hi,
          I have 2 radiobuttons R_A & R_B and i have one text field like P_TEXT. Based on selection of radio button i have to change the default values in P_TEXT on the selection screen. like if i select R_A i have to display P_TEXT = 'A'. if i select R_B then it has to display P_TEXT = 'B'. I tried like as below
    in AT SELECTION-SCREEN OUPUT EVENT.
                 IF R_A = 'X'
                   P_TEXT = 'A'.
                 ELSEIF R_B= 'B'.
                   P_TEXT = 'B'.
                 ENDIF.
            But it's not working. it is working only for first radio button. when i select second radio button it is not giving the second value. can any one tell the sol.
    Tks in advance.

    Hi Pammi,
    Use this code, its working:-
    PARAMETERS : r_a RADIOBUTTON GROUP gp1 DEFAULT 'X' USER-COMMAND rb,
                 r_b RADIOBUTTON GROUP gp1,
                 p_text(20).
    "we use user command with the radiobutton so that some event is occured in order to call AT SELECTION-SCREEN OUTPUT.
    AT SELECTION-SCREEN OUTPUT.
      IF r_a = 'X'.
        p_text = 'Hello'.
      ELSEIF r_b = 'X'.
        p_text = 'Hi'.
      ENDIF.
    In the above case 'AT SELECTION-SCREEN OUTPUT' will act as PBO of the selection screen and will change value of selection text as per condition.
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • Changing the default value of  "Items Due" in iProcurement 11.5.9

    Is there anyway of changing the default value of 'Today' that appears in the Item Due field when doing an expanded search on Receive Items? We would like this set to 'Any Time' which is more useful to us.
    Is there anyway of changing the default value of 'Today' that appears in the "Requisition Created" field when doing an expanded search on Requisitions in iProcurement? We would like this set to 'Any Time' which is more useful to us.
    We are on 11.5.9
    Thanks in advance...
    Regards,
    Sajid

    You should be able to do that, read my reply on this thread below on iProcurement page customization in 1159.
    Adding item to exiting AK Region
    Thanks,
    Tapash

  • How can we change Prompt  default values based on other prompts....

    Hi Experts,
    I have a prompt Status --> DAILY,WEEKLY and MONTHLY.
    If user selects any one of this value the default value in another prompt Startdate and Enddateshould change,Here Startdate and Enddate is Editbox/calander control.
    Declared the presentation variable in first prompt and in the second prompt of SQL Results(Default to) i am writing
    +SELECT CASE WHEN '@{Pres}='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END+
    but in the default one it was not showing the Repository variable value...
    Please suggest me any solution its an urgent
    thanks,
    saichand.v

    Hi Saichand,
    Are you getting an error ("Error Generating Drop Down Values")? Or are you just seeing a blank default value?
    If you are getting an error, do you have any presentation columns in your default SQL formula? If not, that's your problem. OBIEE won't let you construct a logical SQL query without having a presentation column in it somewhere.
    If this is your issue, try the following: SELECT CASE WHEN 1=0 THEN <PRESENTATION_COLUMN> WHEN '@{Pres}'='WEEKLY' THEN VALUEOF(VAR_WEEKLY) END FROM <SUBJECT_AREA>
    Be sure to replace SUBJECT_AREA and PRESENTATION_COLUMN with appropriate names. The condition 1=0 will never evaluate to true, so it's as if it's not there, but OBIEE will see that there's a presentation column in the formula and stop giving you the error.
    Good luck and if you found this post useful, please award points!
    Best regards,
    -Joe

  • Change IDE default value

    I checked past posts but did not find what I was looking for...
    Is it possible to change the defaults for certain properties? For example I would like to set the default layout to a GridLayout vs. FlowLayout for all containers. Is this possible?

    No, it isn't. There are no options in the Preferences for that. Maybe an option in a later release.
    Best regards,
      ok

  • Dbcache value changes to default value by itself

    Hi,
    Recently I changed the dbcache value to improve the performance. I used the formula 1.2 x( sum of all .db3 files)+ future growth to get the new value of dbcache value.
    The server has abt 8 GB memory and the value of dbcahce value is abt 45MB.
    Now after restarting the server and other applications, the dbcache value has changed on its own to default value of 10000000 .
    Does anybody know why this has occured?
    Thanks in advance

    HI,
    I'm sorry to ask this question, but do you save the settings before you restart the directory server?
    Have a nice day.

  • How to find a BADI to change the default value of a Web Dynpro Screen?

    Hello Experts!!
    My requirement is as follows-
    The SAP cProjects Distribution Functions screens default the Calculation Base to “Per Day”(This is represented via the initially-selected value in a listbox). The requirement is to make it deafult to the current standard “Per Month” (This also appears in the list box).
    Is there any BADI to achieve this?
    I tried putting a debug point in the Get_Instance method of the class cl_exithandler to find all the BADIs associated with the screen. I got a bunch of BADIs with no luck. And now I am not even able to debug anymore as the debuger is not opening. Can anybody tell me why this is happening? It was working two days before. And yes I have read all the posts about debugging a web dynpro application and I am doing everything that is mentioned there- I have set an external debug point and I have checked the "IP Matching" checkbox against my name in the workbench, but, with no luck
    Any help on this will be greatly appreciated.
    Thanks and Regards,
    Smitha

    You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
    Try to take over the world!

  • To change the default value in approval column of Approve time data view

    Approve working times in MSS
    For a manager:
    Approval view in approve time data iview has a column with name approval.  The value is defaulted to approve all. Can any one let me know how to change this value.
    Or  point me to any documentation which will be of help with this.
    ESS BP Version 1.41
    ECC 6.0 EHP4
    Thanks,
    John.

    Hi John,
                  uncheck the mass approval option in the Timesheet config.
    Cheers!!!
    Umang

  • How can I change the default value in IT0009?

    Right now in our system when we create a new IT0009 entry, several fields are defaulted such as the payee name, bank country, and currency (field WAERS). But in table T588Z I can not find anything defined for IT0009. Now even I create entries in T588Z ex. as 
    0009              WAERS     06     10     W     P0009-WAERS='USDN'
    the currency still shows up as 'USD' when I create a new record. Can anyone tell me where the field 'WAERS' is defaulted as 'USD' and how can I control this?
    Thank you very much.
    Best regards,
    Johnson

    Hi Johnson,
    Correct me if I am wrong,You need to default a value, so i guees you would need to use the feature P0009 not the dynamic action. If you could let meknow the current structure of the p0009 feature, may b i could help you figure the could-be structure of the p0009 to default the required value.

  • Change Description of Service Item default value

    Hello
    in a service SC, on the item detail basic data, we want to change the default value of the field "Description of Service Item ". by default it is "Service Item" and we want to change it.
    Where can I change it excepted in BADI BBP_DOC_CHANGE_BADI
    thanks,

    Hi
    Which SRM version are you using ? What is your business requirement ? Do you want to change Service Item description value for every line item in the shopping cart OR
    the permanent text displayed on the Left side on the HTML Template.. ?
    <b>Incase you want to modify the HTML template Text, then it can be done using HTML Template modification.</b>
    Using Transaction SE80, In the Internet Service - BBPSC01, you need to find the relevant HTML Template and make the required chnages to the Description there as per your business requirements.
    All BBPSC* transaction are using the HTML sources of service BBPSC01.
    So you have to modify template SAPLBBP_SC_UI_ITS_300 from service BBPSC01.
    Make sure to publish the complete service on all defined sites so that changes can appear in all respective SRM Client systems.
    Related links ->
    BBPSC01 Template Labels stored where ????
    Re: Template Shopping cart
    Re: Internet Service flow
    Re: Need to change the field description
    Re: how to change descriptions of links on the shopping cart page
    How to change "vendor text " label in BBPSC01 and BBP_POC
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Change default value of Partner Function in VA02

    Hi all,
    Can anyone please help me solve the following issues with Partner Functions in VA02:
    1. How do I change the screen property (make it modifiable) of the Partner in the Partners tab for an auto-generated Free goods line item?
    2. How can I change the default value (auto-pulled from KNVP) of the Partner Function Ship-To party for a Free Goods line item? Where do I apply the ABAP code?
    We tried to modify thru userexit USEREXIT_FIELD_MODIFICATION and USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ but we can't seem to make it work. Also, the table control of the partners tab exists in SAPLV09C and not SAPMV45A.
    Where do we apply the changes?
    Points will be rewarded.
    Thanks for any help in advance!
    Kat

    Hi !! KT,
    For your auto generated line of free goods item note down what is the item catergory determined. Next use t.code VOPAN, click on radio button 'Sales Document Item' and click on change tab.
    Now from the left hand margin options click on 'Partner determination Procedure Assignment', from 'position' go to the item catergory noted down, now note down the partner determination procedure assigned to it.(entry just next to your item category).
    Next, from the left hand margin double click on 'Partner determination procedures'. Select the partner determination procedure just noted down, from the left hand margin now click on 'Partner functions in procedure'. Scroll down exactly to the partner function you want to work upon, here unselect the tick under 'Non modifiable'. This way you can now modify the partner.
    For changing the default value after doing the above mentioned exercise you can overwrite default value.
    Provide your feedback.
    Regards,
    PATHIK

  • Programmatically changing default value

    Hello,
    I use a vi in one step of TS which has default value, let's say 10, and I am not allowed to change this vi at all. However, I want to change the default value from 10 to 100. Is it possible to make another vi which does the trick? For example an action step which does the trick before the step with value of 10? I hope you understand my explanation
    BR,
    Jick

    Is this value a control?  What's wrong with just passing in the proper value?
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for