IMessage and Facetime issues after upgrading to iOS 8

My husband has a Mac-book pro, and I have an iPhone 5C and an iPad (with retina display). I just upgraded my phone and iPad to ios8. Before, my husband and I were able to send messages back and forth with iMessage and he was able to call me on Facetime and now we cannot. I did not accept the iCloud drive on the phone and iPad, but I think he may have on his end. He is currently out of town so i wasn't able to tell him not to when it popped up. We do use the same Apple ID for iTunes and the computer, iPad and iPhone, however for iMessage and Facetime he has his own Apple ID. Is there any way I can fix this so we can talk again with the iMessage? Any help will be greatly appreciated. Thank you so much.

iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime

Similar Messages

  • HT4623 iPhone 4 (2011) very sluggish and battery issues after upgrading to iOS 7

    Hi,
    I am experiencing crazy sluggishness in my GSM iPhone 4 (2011 model) after recently upgradig to iOS 7.0.2 from 6.1.3. Phone's freezing every few seconds and when it does, you can't do any activitiy, keyboard will not respond, videos will freeze etc.
    Top of it, the battery is drying up like nuts. It used to work for more than 24 hrs with same settings earlier, now hardly 7-8 hrs !!! ..... I turned off everything like background-app refresh, wireless, 3G, bunch of other things, infact not even keeping any apps running in background while not using, I immediately kill it as soon as I am done using it.
    Am very badly stuck, biggest mistake of my life that I ugpraded to iOS 7
    - Is anyone experiencing similar issues ?
    - Is there any way I can go back to previous version ... is Apple still signing iOS 6.1.3 ? I don't have shsh blob backup of previous version.
    Any thought is greatly appreciated.
    Thanks in advance,
    Rajiv

    rajivrp wrote:
    Hi,
    ..Phone's freezing every few seconds .
    Any thought is greatly appreciated.
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also try a Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    rajivrp wrote:
    - Is there any way I can go back to previous version ...
    Apple does Not Support Downgrading... Never has.

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • IPhone 4s issues after upgrading to IOS 8

    Have few issues after upgrading to iOS 8
    - Phone hangs every few hours, reboots automatically
    - Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
    - Searching for contacts is a problem
    - Apps hang (especially facebook)
    Any way to go back to iOS 7 ?
    Any other tips / tricks appreciated..
    Venkat

    No way to come back to iOS 7 ...
    But did you tried to reset all settings (general -> reset -> all settings) ?
    For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

  • Freeze/Battery issues after upgrade to iOS 8.0.2

    Since upgrading my 3rd Gen iPad WiFi to iOS 8.0.2 I have been experiencing freezes where nothing works. I can't open apps or do anything. If I hold the on/off button down eventually it comes back to life.  Second issue is battery life.  Last night I closed my smart cover and made sure the display was off.  Battery at the time was 62%. This morning I opened the iPad smart cover and the battery was down too 23%.  This has happened a number of time over the past week or so. I have Blue Tooth and Location Services off.
    Both of these issues are new after upgrading to iOS 8.0.2.  No problems whatsoever prior to that.
    Not sure if I'm putting this in the correct category or not.
    Is there a way to wipe the iPad clean and reinstall everything from scratch or is my iPad just shot?  Thanks in advance.

    Same sort of issues here on my ipad3. iOS 8 turned it from a nice slick device into a jerky, laggy pain. Tried all the reset options and it's still pretty crap.
    NIce one apple, I'm changing to a galaxy tab after you broke my iPad!

  • WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

    Hi,
    WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
    My iPhone is fine after the upgrade though.
    Clearly an iOS8 software issuse on iPads?
    Thanks

    Similar thing happened to me..  Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
         Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose  of an iPhone..
    Keeping my fingres crossed till then!

  • Unable to send text and play music after upgrading to IOS 6.1

    After upgrading to IOS 6.1, I am having problems sending text messages (sms) to several of the contacts to whom I was able to send text earlier. Also all the songs I have downloaded previously from iStore have all stopped playing. Being a new IPhone convert I am seriously regretting why I got rid of my Blackberry

        I can understand how you are upset, MJ406. I want to make sure that we do everything we can to get the text messages up and running with out any kind of problems.
    When you are trying to send these text messages out are you connected to Wi-Fi or the cell network? If you are connected to wi-fi please do me a favor and turn of the wi-fi, try to send a text to see if it goes out without any kind of issues. Then go into Settings, Application Manager, Slide the screen to the ALL section, Scroll to Messaging and perform a force stop, clear cache, and clear data. Once that is done, power the device off and then turn back on. Once it is back up and running you can turn the wi-fi back on (if you had to turn it off) and retry sending a text message again.
    Please keep us posted.
    Kevin_VZW
    Follow us on Twitter @VZWSupport

  • Sync issues after upgrading to ios 7

    After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
    Thanks in advance.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • My iMessage will not work after upgrading to iOS 8

    I have tried everything and cannot get iMessage to work since i upgraded to iOS 8

    go to settings, general, reset, reset all settings. this causes the phone to reset and finishes installing certain iOS 8 features in iMessage like self destruct, etc. and should fix any glitches you're having.

  • Cisco 7200 VSA issue after upgrade to IOS 15.2

    After upgrade to IOS 15.2(4), VSA module in 7206VXR (NPE-G2) is disabled and we cannot enable it.
    Show diag output:
    ------------------ show diag ------------------
    Slot 0:
    VSA IPsec Card Port adapter
    Port adapter is deactivated
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    PCB Serial Number        : JAF1309ADDT
    Hardware Revision        : 1.0
    Part Number              : 73-10220-05
    Board Revision           : B1
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Deviation Number         : 0
    Product (FRU) Number     : C7200-VSA          
    Version Identifier       : V01
    Top Assy. Part Number    : 68-2578-05
    CLEI Code                : CNUCAFNAAA
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF C1 8B 4A 41 46 31 33 30 39 41 44 44 54 40
      0x10: 05 0D 41 01 00 82 49 27 EC 05 42 42 31 03 00 81
      0x20: 00 00 00 00 04 00 88 00 00 00 00 CB 94 43 37 32
      0x30: 30 30 2D 56 53 41 20 20 20 20 20 20 20 20 20 20
      0x40: 20 89 56 30 31 20 D9 03 C1 40 CB 87 44 0A 12 05
      0x50: C6 8A 43 4E 55 43 41 46 4E 41 41 41 FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    If we try to enable it manually from CLI we get the following message:
    Router(config)#crypto engine slot 0
    VSA will NOT come up until system power-cycle or reload
    Of course, after reload nothing happens.
    Is VSA incompatible with IOS 15.x? I'm asking because downgrade to 12.4 causes VSA to be active again.
    Regards,
    Igor

    Hi igor,
    1) FDP image
    Field-programmable devices (FPDs) are hardware devices implemented on router cards that support separate software upgrades. An FPD image package is used to upgrade FPD images
    The FPD image package must be compatible with the Cisco IOS software that is running on the router. If an incompatibility exists between an FPD image package and the Cisco IOS software release running the router, the device with the FPD will not operate properly until the incompatibility is resolved.
    The FPD automatic upgrade feature searches only for the FPD image package file that is the same version number as the Cisco IOS release being used by the system. For example, if the Cisco IOS release being used is Cisco IOS Release 12.4(5)T1, the system searches for the FPD image package file that supports the specific Cisco IOS release (c7200-fpd-pkg.124-5.T1.pkg).
    2) Steps to Upgrade:
    From the document below which I already sent you, please refer to the section “How to Upgrade Field-Programmable Devices”
    http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html
    I would recommend you to follow the steps in the “Field-Programmable Device Quick Upgrade (Automatic FPD Upgrade Only)” as that is the recommended and the easiest way.
    Steps are:
    The command is present “upgrade fpd auto” in the running-config by default.
    Have the Cisco IOS image in disk2:
    Download the FPD image package to disk2: flash disk
    Reboot the router using the new Cisco IOS release.
    Hope this helps
    Thanks
    Syed

  • Silent email and sms notifications after upgrade to iOs 5.1

    After upgrade to iOs 5.1 my iPhone 4S makes no sound when arrives an email or a sms. Is it a bug??

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Yahoo mail sync issue after upgrade to iOS 5

    After i have upgraded to iOS 5 my emails from Yahoo are a month off.
    Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
    Any ideas on how to fix this?

    Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
    I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
    then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!!  now I can use Facetime with my bro in airplane mode.
    I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess). 
    anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

  • Signal issues after upgrading to ios 6.1.2

    ever since i've upgraded to ios 6.1.2 have had problems with my signals, hv never seen all bars; 2 at most. hv drop calls all the time. it;s irritating . tried evry thing like network resets, turning off/on 3g and lots of stuff suggested in other threads bt in vain . happened once before in one of the ios 5.something series bt ws fixed on the next ios upgrade. apple needs 2 fix this soon and launch the next update .once fixed i dnt think i'l eaisly try experimenting with ios updates.

    Exactly the same as me. Updated now can not get FaceTime to work. Just hangs on the connecting page then loses connection after several seconds.
    Friends calling me does the same thing.
    It is not our router, I can download and upload data quickly without any problem.
    Who quality controls IPads? Seems lots of mike and connection problems with Talktime at the moment. Apple must be embarrassed.

  • Ipad 2 Wifi issues after upgrading to ios 7

    I live in a small house, 750 sq ft area (30 x 22). Ipad wifi was working fine in all the rooms before upgrading its iOS to 7. After ipad2 iOS was upgraded to iOS 7, wifi now works in the room where the Wifi router is located. But does not receive Wifi signal in any other room. I tired everything that has been suggested in the forum - like changing the router settings (channel, security etc),playing with ipad2's wifi, etc. etc. But to no avail!
    Clearly the bug in iOS 7 has caused this issue! How does one log this issue with Apple tech support team so they can rectify this issue in iOS 7 patch? Also, please let me know if I should be trying anything else. Thanks!

    I have exactlythe same issue. Have had ever since the upgrade to iOS 7. It's nothing to do with the router. It has to be a bug in iOS 7. Question is, would upgrading to iOS 8 help at all???  Anyone done this.??  I used to love my iPad and it was never out of my hand. Now I just hate it and use my Kindle Fire all the time instead. I used to pick up wiif signals across the street. Now I have to be sitting on a router to connect.
    <Edited by Host>

Maybe you are looking for

  • Transfer of msg type files from Dell to Mac

    good morning - I bought my first Mac yesterday (in reality I had a Apple 2GS 20 years ago) I am transferring the daya from my Dell PC to the Mac - in the documents I want to transfer I have many msg type files from Microsoft Outlook - the Mac does no

  • Camera connection kit issue

    Hi, Currently I have 2 iPads and after I upgraded one of them to iOS 7 the camera connection kit is recognized into the About section in general section.. But nothing happens on Photo app when I plug it in. In the other iPad with IOS 6 the camera con

  • Filling with background color

    hi, i am trying to do something that paints some controls on the screen, and if a control reacts in a certain way, it should be repainted. the problem is, some controls are small, so instead a 'repaint' handler for all the screen, it would be nice to

  • Ask; Snake n ladder quizz

    Hello friends, I want to ask,,, anyone can help me? I'm learning to make a quiz game snakes and ladders, how to play is when before rolling the dice a player must answer the question arises, if the correct answer then the player can play dice. but if

  • Error message - Printerhead appears to be missing

    Help please Trying to print and this error appears ............... The printhead appears to be missing. Not detected, incorrectly installed, or incomplete  I do not even know what a printerhead is (no wonder I lost it!) Appreciate any assistance