Imessage and other Issues with 3rd Gen iPad

Hi there, just got a 3rd Gen iPad for the mrs and so far it's been great.
However, several rather annoying issues have developed and I can't seem to find the right trouble shooting for it, so I thought I'd try here.
So here they are:
iMessage & facetime don't work
Issue 1- Each time she uses her Apple ID log in for either feature a message "iMessage Activation: Could no sign in. Please check your network connection and try again". I've checked the network settings, I've reset them on the iPad and yet it seems to persist. Her appleID is valid as it works on her iPhone, which is using the same network/Wifi as the iPad, yet the iPad seems to decide it doesn't want to activate. I've signed in on my appleID and the same message seems to appear
Issue 2 - When using apps like Chrome a constant message will appear "Connect to iTunes to use push notifications" every time the app is open. This has been done, it's been backed up and it has connected to iTunes, yet these messages still pop up each time chrome is opened.

I also am having issues with my ipad mini as far as imessage . sometimes it works fine . Sometines I receive ok but it hangs on sending . i have tried everything . I think the apple server is a mess Most times I can only send If i am replying to a message i received . If i try to start a message it hangs . No reason found

Similar Messages

Cellular reconnectivity issues with 3rd Gen iPad 3G/4G/LTE

I've read a few other threads regarding a reconnection issue with the new (3rd Gen) iPad. I'm creating a discussion so people can put there thoughts here regarding the issues they are having with reconnection of cellular data connections.
I have AT&T 64B iPad Gen 3 with 4G/LTE. Black. Works just fine on wifi and my LTE screams at home and work. Faster than my cable at home. I have noticed something behavior regarding data connection when it's lost (like in a tunnel). I ride DC Metro to work and go through a few tunnels. Of course, my data connection drops in the tunnels. When I come back out the indicator on the iPad indicates 5 bars signal and LTE again. Problem is the data connection isn't there, no matter what app I try. I even get a popup window say my cellular data plan has not been activated (huh?). This isn't true since I am on, and have been using a plan. It does this whether it's 4G or LTE reconnection. Not sure about 3G because I haven't seen 3G icon popup on this iPad yet.
I'm thinking this may be an authentication issue? Else, why would it popup that warning? Anyway, all I do is is go into settings turn cellular data off and back on again and everything is fine.
I'm guessing that there could be a software fix for this in the future as there are quite a bunch of people having this problem with reconnection to cellular.
Please post your issues here in this discussion if you have this problem. Maybe we can figure something out.

I have the same iPad (3rd gen, 4G ATT, 64GB, Black). When it arrived last Friday, everything seemed to work fine, except the cellular data connection. It would constantly drop, and I had to toggle cellular data off and back on to get it back. Also, I was getting really slow speeds (on cellular data only - wifi works fine). I tried some simple fixes (restarting, resetting the network settings, restoring), but I kept having the problem. I finally made an appointment at the Genius Bar, and they immediately gave me a new iPad, saying "it could be a bad antenna." Here is the bad news. Even with the replacement, the connection seems to drop less often, but it still drops. The part that concerns me most is that the data speeds on my iPad are considerably slower than on my iPhone 4S when I test them in the exact same spot (I use the Speed Test app). So on my iphone, I get speeds around 3 Mbps, and on the iPad, I get speeds of less than 1Mbps. I can't see any logical reason that the 3rd gen iPad would not get at least as good or better data speeds as an iPhone 4S. The fact that I have now had two 3rd gen iPads with cellular data problems concerns me. However, it is very hard to tell if this is a software, hardware, or network issue. The fact that my iPhone is running the same update of iOS (5.1), and has no problems would seem to eliminate the software and network as causes, but I can't really be sure. I am going to watch the posts in the support communities for another day or two and then head back to the Genius Bar. Overall I love the new iPad, but this has been a real downer.

Can I use my iPad dock with 3rd gen iPad?

I already have an iPad 2 dock. Can I use this for my 3rd gen iPad?

Hi Capp 543:
I don't really use it any more live, mainly because I use my iPad for reading music and don't want to switch around apps. I'm not part of the company, but I'll try.
IMO the iRig manual is way way too simplistic.
I am attaching some jpeg's of what helped me solve it, though it was tough. If it doesn't open, search Audio Midi Setup help for "sharing midi data over a network". You have to create a wireless session using Audio/Midi setup, OR create an "ad hoc" network using bluetooth if there's no wi-fi (another set of problems...). This may be your issue. There are a few things beyond getting the wireless network appearing that you have to do, that's why I'm suggesting this even though you did it, or a part of it.
In particular:
"Anyone" has to be set as who can connect to me in the lower left of the wireless midi setup screen, and
First get everything else ready, meaning the iPad connecting, THEN LiveRig has to be launched from closed, meaning do an icon hold and close in down iPad, then open it up for it to connect, when everything else is ready. for some reason that helped me.
In MainStage, you of course need to go to the MainStage #1 Setup screen, drag in sliders, then "learn" them to the LiveRig, which should now be seen when you click "learn" and move a Liverig slider. I have a vague recollection about not seeing iRig in the MainStage #1 top left device window, but then going into the drop-down menu there where the device shoudl be, selecting it, then learning the sliders. Then in the #2 Edit window you assign the sliders etc.
I would suggest first connecting it via midi wires and getting it to work, which will help you decide if a problem is in the wi-fi or somewhere else when you go to connect it up with wi-fi. You'd need the Apple Camera Connection kit adaptor. I myself would alway run it via midi if I'm playing live, too many unknowns with unknown networks.
Hope that helps.
Neil

Unable to log into iMessage and intermittent issues with FaceTime

Late 2011 MacBook Pro, OS X 10.8.4. I'm an admin level Windows guy but a relatively new (and otherwise very pleased) convert to Mac OS.
This morning Messages started repeatedly prompting me for my iMessage password and FaceTime has starting working only intermittently. Both work fine from my iPad and iPhone 5. Both have been working from my MacBook Pro for months.
This morning when I tried to fire up Messages on the MacBook I got an error saying "The server encountered an error processing registration". After doing some Googling, I noticed that many folks said that when they had this problem they also had an issue with FaceTime. I confirmed that FaceTime was indeed giving me the same error as iMessage. After trying some solutions from past threads that didn't work, I rebooted. Now instead of throwing an error, Messages just keeps asking me for my iMessage password again and again. FaceTime works occasionally but sometimes when I get a call and click answer, I get "call failed" as my iPhone and iPad continue to ring and then I'm asked to re-enter my password on the MacBook. If I enter my password it just sits and spins. If i quit FaceTime and start it again, it'll usually log in successfully but calls may or may not work (following the same pattern I just mentioned).
The odd thing to me is that when I tested FaceTime on my iPad, I got notifications on my iPad and iPhone and my primary and alternate email address were now registered with FaceTime. They have been for over a year so I'm not sure why I'm getting those notifications again.
I'm able to log into the Mac App store without a problem using the same AppleID
What I've tried so far based on Google results:
1. In Keychain Access, reset my default keychain - No improvement
2. In Keychain Access, selected Keychain First Aid, repaired and verified - No improvement
3. On my iPad, turned iMessage off and back on - No improvement, though iMessage on the iPad still works fine
4. Confirmed that my primary and secondary AppleID email addresses and password are correct. The email address associated with my AppleID is not associated with any other AppleIDs.
Thanks!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Video playback issue with 3rd gen iPod Touch

Hi all,
I just recently discovered an issue with my iPod touch 3rd generation video playback. The issue just reared its head today and I have no idea what I could've done to cause it. It's a small issue but frustrating enough to cause a problem.
If I watch a video normally (by opening up the Videos section and picking it), it'll play through to the end, then start over again, then stop. This only happens if I choose videos randomly, and doesn't happen if I play videos in a playlist.
What could be the issue?

I'll second that. I've been having the same problem since the last software update

IMessage and other services with Apple ID

There are four people in my family. We all have iPhones. My mom and dad and me are all on the same Apple ID. My sister has her own apple ID. For Mom, Dad, and I, iMessage and Find Friends conflicts. Is there a way to have separate Apple IDs but still share purchases like apps, songs, and movies?

FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Battery not recognised - and other issues with 867MHz Ti Book

Ok - here`s my story - I wonder if anyone can give me advice
on what to do next.
A week ago I started having trackpad issues with my tibook.
On 2 consecutive mornings the trackpad seemed to have frozen, held down. So that it brought up menus if the mouse was moved over one of the bars at the top of the screen. I wasn`t however, able to `click` on anything. An external
mouse, when plugged in, also didn`t work, though I was able to navigate the display using the keyboard shortcuts.
The first morning this happened, the OS also appeared to reset itself. ie the screen display picture went back to its original state - and all of the applications that i subsequently opened gave me a first time user `welcome` message.However, all of my files/photos/music etc were intact.
When the trackpad was working I backed everything up, ran
the hardware test cd, which came up clear, and called apple. They picked up the computer, which is under
warranty, on Friday, and at the time it was working fine.
I got the computer back yesterday, but unrepaired, and
with a new set of faults. Apple told me that they had checked the computer and had found
some evidence on the logic board, power in and bottom case
of past liquid spillage - but no other problems with the
computer. I don`t deny the liquid spillage ( a few ml of
water), although it
occurred 11 months ago and I have not had any problems with
the computer since 24 hours after the spill.
The state of the computer now that Apple have sent it back
is as follows: The trackpad is working. However, the computer is not recognsing the battery, or the wireless
networking Buffalo pc card. The clock also resets one out
of every 2 or 3 times that I restart the computer. These problems did not occur before I sent the computer to Apple.
Yesterday I erased and reinstalled 10.4 just in case that had
something to do with it - but it has not helped
So - my questions.
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend
a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this
one is coming up for 3 years)?
Thanks,
Antony

Hi Antony,
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
Yes. Corrosion occurs over time, and it could have taken 11 months to reach "critcal mass."
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
Theoretically, any time anyone does anything inside your PB, they could have caused additional issues, however, this would not be "normal."
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this one is coming up for 3 years)?
Before paying for a new LB or a new PB, try a PMU Reset and Test PB Backup Battery.

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

DNS and other issues with SBS Server 2003

I see a lot of excellent information out here in the discussion group but I understand little of it. I am technology savvy but not an IT man, so please be patient when I ask questions to clarify your responses.
My first question should be an easy one to answer. Has anyone told you all that they appreciate your help today?
I DO !!! Thank you for your kind nature and your choice to help others (like me)!
Our 2003 SBS server has multiple issues. The server has two NICs; one for the WAN connection and one for the LAN.
Windows IP Configuration
Host Name . . . . . . . . . . . . : mathewsserver01
Primary Dns Suffix . . . . . . . : MathewsElectricalInc.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : MathewsElectricalInc.local
Ethernet adapter Mathews Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #1
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E7
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
Ethernet adapter Network Connection to Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E6
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.yyy.xxx.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.yyy.xxx.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled
#1 In Event Viewer (Local) Application I have recurring event Source=Userenv Event 1053 every 9 minutes.
#2 In Event Viewer Directory Service I have recurring event Source=NTDS General Event 1126 every hour.
#3 In Event Viewer DNS Server I have recurring event Source=DNS Event 6702.
Also, I am surprised that the LAN NIC #1 is not set up as DHCP!
What information may you require to assist me?
tmath2 in Houston

Hi,
Could you type “route print“ on CMD, and post the result here?
It would be helpful if you may describe the phenomenon of the problem? such as changes before the problem occurs, any prompt error message, related operations except for these logged Event ID.
You may reference the link below for reference.
Event Source Userenv and Event ID 1503:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1053&EvtSrc=Userenv&LCID=1033
Event Source NTDS and Event ID 1126：
http://support.microsoft.com/kb/305837
DNS 6702：
http://technet.microsoft.com/en-us/library/cc735806(v=WS.10).aspx
Best Regards,
Eve Wang
Thanks Eve! I appreciate your attempt to help. I inadvertently posted my reply for the Route table without quoting you first. Sorry about that.
As far as the problems go, time to logon to server > 5 minutes. Group Policy issues abound. DNS issues (as mentioned). Thought I had an easy one for you. Sorry about that.
I have one client computer running Windows 7x64 (call it My Workstation) that I back the server and other client PC's up to. The clients have no problem, but after a day or two, the server can no longer "see" the My Workstation and the backup fails.
But then when I reboot the My Workstation, the server "sees" it again!
Furthermore, I backup a 10TB RAID 6 array on
My Workstation to yet another client for redundancy (Call it WORKSTATION2-PC), but if I try to click on the computer icon in Windows Explorer for WORKSTATION2-PC, I get the error "Windows cannot access \\WORKSTATION2-PC. However if I type in
the ip address or WORKSTATION2-PC, I have no problems.
tmath2 in Houston

IMessage and iPhoto Issues with Upgrade

Hi,
I've just upgraded from Leopard to Snow Leopard and then Mountain Lion. All thats gone fine, I've put more RAM in and the upgrades have all gone smoothly. However I'm having two difficulties that I just can't seem to work out where I'm going wrong.
Firstly I want to use the contacts on my iPhone 5 for my iMac to use iMessage. It's all set up, however not all my contacts have been synced from my iPhone, only certain ones? and some just say the mobile number on my iMac and not the contacts name?
Secondly, I had iPhoto etc on my iMac when I bought it with Leopard operating system, now I've upgraded I've lost this, how do I go about getting it back? I've tried to put the original disks that my iMac came with in but I can't seem to load just the software back on. I know with newer Macs you can now download through the app store, but I have a 2007 iMac so don't have iPhoto on my account.
I'd appreciate any advice on this as I can't seem to find anything online thats helped so far. Thanks!

Hi,
If you use an iCloud Apple ID then the Contacts list should sync across all devices.
I would check the iPhone has the Name of the contact as well as the Number.
At first thought I would have suggested a Time Machine restore of the missing app.
However many Apple Apps can get their Updates when the OS is updated.
My iPhoto version is version 9.4.1
If you only have access to an much earlier version it may not work in Mountain Lion to then get updates for it.
9:33 PM Thursday; October 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My trash can shows empty and other issues with it...

Ok basically, if i delete anything on my mac it should go to my trash can right?
Well i have a few problems with that as follows:
1. Everytime i delete something or move something to the trash it asks me to enter my password everytime, then deletes it, this never used to happen and now all of a sudden it does, this started just before the latest lion update and ive tried everything i know to stop it doing it but failed.
2. When i do delete something, the trash can shows empty on my desktop, and when i open the trash there is nothing inside, so im not able to restore anything if required, so basically if i move anything to trash it just gets permanently deleted instead of storing it in trash first, again this started just before the latest lion update.
I was hoping the update would fix this issue but didnt change it what so ever, i have also tried repairing disk permissions and still no change.
Any ideas on what i can do to fix these problems? Im still new to mac so i dont know all the ins and outs, but any help on this would be appreciated.
Cheers all,
Carl

Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

The wifi reception on my 3rd gen iPad is very poor. I have an airport express and unless I am right next to it the connection drops. Is there is software update to fix this?

The wifi reception on my 3rd gen iPad is terrible. I have an original iPad and iPad2, works fine with them. Is there is a software update to fix this?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

I purchased two 3rd gen ipads. However, one had the original wider cord plug in -- the other had the new smaller power cord plug in.

Should I return?

The one with the smaller connector is a 4th generation ipad. There were no 3rd gen iPads with the lightning connector port.
As far as returning... If you payed 3rd gen prices for 4th gen iPad I'd say keep it. If you payed 4th gen prices for both, return the 3rd gen one and ask or a 4th gen. As that's what they should have given you.

I just got a new 3rd Gen Ipad wi-fi and I cannot get it set up.T-I am using my iphone hotspot and it is working.i'm stuck

i just got a new 3rd Gen Ipad and I cannot get set up.I am using my Iphone4g hotspot and it is on and working.The Iphone comes up as the network and when u touch the arrow a new page comes with some stuff I don't understand
Thank you.

What does the page say? What do you need help with?

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?

You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue.

Imessage and other Issues with 3rd Gen iPad

Similar Messages

Maybe you are looking for