Imessage can not delivered after i success to setting up

after i success to setup the Imessage from the general]setting , i try to send imessage ,msg appers in red "NOT DELIVERED" even it is seems all setting is ok.
please i need help.

I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes. Now it's dad and husband, every time! Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails.
And the other annoying thing- the blue bar will run all the way, and it will say "delivered". So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point. I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions. (I have rebooted phone, reset network settings, with no luck. I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me)

Similar Messages

IMessage shows not delivered on one device, but delivered on others

Hi there,
since a few days I have a strange iMessage problem. When I write an iMessage to someone from my iPhone it shows up as not delivered after a few seconds, but the message does arrive at the recipient. If I look on my iPad the same message looks ok, it shows the delivered/read status perfectly normal.
When I switch devices, the problem exists the other way around. I get the not delivered status on my iPad but the same message shows up OK on my iPhone.
The problem exists on different WiFis and on the 3G network.
I already tried to "reactive" the iMessage service on my iPhone but to no avail.
Does anyone have any ideas as to how to resolve the problem?
Thanks in advance,
Gritzens

Aaaaand seconds later I found the solution:
I logged out from Messages on my Mac and everything works again!

TS2755 imessage saying not delivered

Why is imessage saying not delivered to only one of my contacts, all the other contacts I can send messages fine. I tried restarting the phone, I don't know what else I can do. Help please

Do you have another apple device with iMessage running on it? That was my problem I have a 5s and an ipad 2 and noticed if I turn iMessage off in the settings in my ipad I no longer get that not delivered message on my phone.

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Material availability date can not be after the delivery date

Dear Experts,
we are using the following scnario,
1. Once the user creates the sales order, automatically system creates PO in the background.
we have created Bapi program for creation of Background PO in SD User Exit.
The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
Does any one can through lights on this issue,
Thanks and Best Regards,
Muralidharan S

Hi
The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
Also check the Transit time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
Regards
Rajkumar K

Can not open After effects by System 10.9

Kann After Effect nicht starten. Habe die aktuelle Version auf dem Mac
can not open After Effect. But i have the right Version on Mac

12.0 ist nicht aktuell. 12.1 oder 12.2 schon eher. Das sind die üblichen Probleme mit Mavericks und insbesondere 12.1 hat schon etliche davon beseitigt... Also einfach mal die Updates installieren.
M ylenium

Zsh completion can not work after re-login

I follow http://www.linux-mag.com/id/1106/
my .zshrc
autoload -U compinit
compinit
zstyle ':completion:*' verbose yes
zstyle ':completion:*:descriptions' format '%B%d%b'
zstyle ':completion:*:messages' format '%d'
zstyle ':completion:*:warnings' format 'No matches for: %d'
zstyle ':completion:*' group-name
if [ -d ~/zshfunc ] ; then
r() {
local f
f=(~/zshfunc/*(.))
unfunction $f:t 2> /dev/null
autoload -U $f:t
fpath=(~/zshfunc $fpath)
autoload -U ~/zshfunc/*(:t)
fi
There is a ~/zshfunc/_fossil script, but it can not work after re-login.
The temp workaround is re-type 'compinit' manually.
fossil <tab> # will use file name as completion
compinit
fossil <tab> # will show commands for fossil
Last edited by dlin (2014-11-10 00:47:14)

Hi
Thanks for the tip. However, I elected not to save the XP SP2 uninstall files when I installed SP2. so I appear to be stuffed.
There must be some creative drivers that work with an audigy with XP SP2 installed!
If not then its either re-format the Hard Dri've and re-install everything again (Doh!!) or get another (not Creative Labs) soundcard.
this is really bugging me.
Zonker

My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

I FINALLY got it to work on BOTH iPhone 4 and iPpad 3. Here is what I had to do:
Had to DELETE all e-mail accounts including icloud.
Did a hard reset (hold down button on top right corner and round button on bottom center)
Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
The iPad receive e-mail until I did the steps above 5 times. Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
Now I am receiving e-mail on both devices normally.
No clue why this happened, but Apple needs to find a fix ASAP.

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

IMessage shows "Not delivered" and then "Delivered" shortly after.

When I send out an iMessage, my iPhone briefly displays "Not delivered" before delivering my iMessage.
Any thoughts as to the reason why??
Thanks!

Hello kbbeck,
The following article provides some useful information and troubleshooting steps that can help get Messages working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

IMessage regularly 'not delivered'

I've done searches on here and the web in general but cannot find a solution to this. Someone please help if you can...
Most days, when I send the first iMessage to anyone who I KNOW is on an iPhone with iMessage enabled, it says '! Not Delivered'. I try again, still fails. I then use the 'Send as SMS' function - it goes (green), they reply via iMessage (comes up with the heading 'iMessage' before their message) and then it works for a bit. If there's then a gap between messages of a couple of hours or more, same thing all over.
This is driving me mad and I CANNOT find a way to fix this. It happened on my old iPhone 4 with iOS 5, 6 and 7 (in fact I ended up switching iMessage off and relying on SMS for a couple of years) and it is still happening on my new iPhone 6 Plus with iOS 8.1.3...

Hello tsphipps,
I know you have said you have done some searches but what kind of troubleshooting have you done on your end. Have tried out the troubleshooting below? It will have you check the settings on your iPhone to deleting conversation threads and starting news ones. Let me know if you still have issues after going over the article.
If you can't send or receive messages on your iPhone, iPad, or iPod touch
https://support.apple.com/en-us/HT204065
Regards,
-Norm G.

BPEL Server can not start after jazn default realm has been modified

Hi, everyone:
In order to customize my user task assigneeGroup, I set up a new realm in the jazn-data.xml using the shell (java -jar jazn.jar -shell). I tried to modify the jazn.xml file in %OraBPELPM%\integration\orabpel\system\appserver\oc4j\j2ee\home\config, and set the default-realm attribute to my new realm.
After these modification, the BPEL Server can not start, the server seems to stop after loading the first two EJB.
Does anyone ever encounter this problem? Could anyone help me?

It appears that I had the wrong oracle home and as a result some of the steps were skipped by the Universal Installer during installation, but installation was still claimed as successful. Even by launching the 'Mobile Server Repository Wizard' manually by running 'repwizard.bat' did not provide all the necessary window boxes to provide the details such as the SID, hostname, port number. I re-installed.
After starting the back-end database and then starting mobile server and testing in IE to see if the server was working by typing in http://<host name>:80/webtogo, I got the screen displaying mobile server.
Many thanks for your help.
Mark

IMessage getting "Not Delivered" error, Message Send Failure

I upgraded to ios5 on my 3GS last night, seemed to have no problems, no errors. When I try sending a text another iphone users, it defaults to sending an iMessage, but then says "Not Delivered" in red, with a red exclamation point next to it. My daughter, on the same network and same house can send imessages to me, but I do not receive them.
In my settings, I've tried turning iMessage on and off, tried setting "Send As SMS" both on and off, no changes. "Receive At" has my phone number, and my apple id email address. I've tried restoring and reinstalling ios, restarting the phone numerous times, nothing seems to work.
Any ideas?
Thanks,
Nancy

I'm in the same boat with my new 4S. I installed 5.0.1 last night and it was working fine until this morning. When I woke up, I tried to send a text message with no luck. iMessage works fine, and I can RECIEVE text messages. Just no dice on sending any. At all.

Contribute 6.5 can not ftp after years of no issues with CS4 and CS5

The problem
Contribute 6.5 can not connect via ftp using settings that formerly worked (and still do) in CS4 and CS5.
How we ended up here
I am the administrator website where
Our content editors have been using Contribute CS 4 and Contribute CS 5 without issue, 6+ years.
We are trying to upgrade to CS 6.5 to better support HTML5 markup now used within the site.
When attempting to configure a website connection in 6.5, Contribute alerts:
"Contribute cannot find the website files on the server. Please contact the website's administrator for assistance."
After closing the dialog box the failed connection is removed from contributes website connection list.
We have a shared hosting account and utilize ftp to publish changes.
Server is Win2008 with IIS 7.5
Again it's shared hosting, so read/write ftp are scoped to our account's directory.
We attempted this on serveral pcs including on a PC with a fresh install of Windows 7.
We can still connect successfully via ftp with CS4, CS5, dreamweaver, and Filezilla.
Which is why I believe this to be a Contribute 6.5 issue.
I've attempted the following troubleshooting articles:
Use network I/O logging to log operations, identify problems
I compared the I/O logging for both CS5 and CS 6.5 which both appear to log the same diagnostic steps.
Contribute FTP Server Checker (quite dated)
All successes reported. No failures.
Troubleshooting a Connection CS4 (linked from with CS 6.5's help UI)
As indicated above, alternate FTP clients have no issue.
This appears to be similar issue to the following posts:
5301620 - HELP - FTP Connection Error with Contribute 6.5
5907180 - Contribute 6.5 can no longer connect to sites ...
Unfortunately, there has been no solutions posted on either of these threads.
Any help would be greatly appreciated.
I can PM the network I/O log details if there is adobe staff who can get them in the right hands.
(Again the logs only show successes.)

@Zaldomoh
Have you found a solution or been given assistance from Adobe to resolve this issue? I'm having the same problem (CS 6.5 ftp'ing to a shared hosting enviroment). Details of our situation can be found on thread 1384686

Imessages won't deliver after cell number change

My husband and I recently changed our cell phone numbers, and now imessages won't deliver between us. We both have iphone 4, ios5.1, and we had no issues at all until we changed numbers. We share an apple id, so I've already deleted the id from my phone under Settings/messages/receive at so that it only shows my cell number. But I still cannot send an imessage to him. I can send imessages to other friends with iphones, but not his for some reason. any ideas??

I'm having a similar issue with my iPhone 5. A friend of mine is using his iPod to text me and using his email address and my phone was fine three hours ago (at 3:00pm central time), but now it won't send any of my iMessages... I've signed out of my Apple ID and made sure Facetime was enabled... and it won't send!

Imessage can not delivered after i success to setting up

Similar Messages

Maybe you are looking for