IMessage Delivery Issues?

Hello.  I didn't see this come up with a few basic searches, but wanted to reach out to the community to see if anyone has been experiencing any recent iMessage Delivery Failure problems.  I did see a brief topic on it on another forum from within the past week, but it didn't really go anywhere.  So this issue is probably isolated to me, but wanted to ask anyway.
Since it's introduction, typically iMessage has worked very well for me, but for the past 2-3 days I have been getting a lot of Delivery Failures.  I use it primarily to interact with my wife during the day, so that's where the lions share of the failures have happened.  I'm at work on AT&T 3G and she's at home on WiFi.
What's really annoying about it is that the message will state "Delivered", but then I move away from the app, or come back in later, and see the red exclamation point w/the Delivery Failure message, which leads me to believe there's some sort of back end failure going on.  I don't know that she's seeing this problem as well, although she also sent some iMessages to someone else this morning that showed as Delivered, and came to find out later they didn't get them at all.  And my wife didn't even end up with any sort of error.
So I guess I just wanted to see if anyone else has been having issues recently that might indicate some sort of an application outage/issue, or if it's just an isolated deal that I have to hope will go away soon.
I have an iPhone 4 and upgraded to iOS 5.1 the day it came out, so I don't think there's anything that would've changed on my phone to cause this issue.
Thanks!

Seems it's a apple-servers issue. At least most of the people I text with got issues with it. Mostly they get sent and delivered, but on the other end they arrived even days later. Doesn't happen with every message but happens from time to time.

Similar Messages

  • Confirmation of iMessage delivery

    Is it neccesary for an iPad receiving iMessage to be logged onto (WiFi or 3G) network in order for the sending iPad to get confirmation of iMessage delivery?

    Try to run program SDRQCR21 in SA38 and check in MD04.
    Regards,

  • HT4623 SMS (Not iMessage) Delivery Receipts

    On iPhone 4, How can i activate regular sms (not iMessage) delivery receipts so that i get notification when my message is delivered?

    Hi there AnnieLW,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    -Griff W. 

  • Post delivery Issue

    hi,
    post delivery Issue and delivery means can u explain?

    Hi,
          Delivery is the one which is created when a sales order is geneated. Delivery indicates that the mentioned quantity in the sales order item will be delivered.
    post goods issue (PGI) - When a delivery is created. Then post goods issue is done. This is done to indicate Finance that delivery has been made hence payment has be collected from the customer
    Reward points if useful,
    Regards,
    Niyaz

  • TS5185 imessage delivery fails ands needs to be resent as text to person that no longer has an iphone

    I recently upgraded to the 5s. My brother used to have an iphone but switched to another phone. When i try to text him, my phone tries to send an imessage and i get a delivery failed message and have to resend as a text. i have removed his contact info a couple of times and reseyt imessage several times but still keep having this issue. Any ideas?

    That's because your brother failed to turn off iMessage before switching to a different phone. He will need to fix that. The only thing that you can do to avoid the problem is turn off iMessage.

  • I'm having issues with iMessage. It works fine on wifi and I receive messages as iMessage without issue in network or wifi. However as I send a message it starts as iMessage then says not delivered. Then sends as SMS since I have it enabled.

    iMessage works on wifi without issue. However I receive messages on network but can't send. I send a message it starts sending as iMessage ten says it can't send. Then starts to send as SMS since it's enabled. I have reset network sertings, updated to ios7, etc and done about 3 othe suggested in order resets to get it to work and it still hasn't started working when I'm not on wifi. Any suggestions?
    It's a iPhone 4S. I have two iPhones. One setup to receive iMessage just to its phone number. Therapeutic to receive to its phone and email. I wouldn't think that would be the issue as all 3 are separate. Bone the same going to both phones.
    Thanks for the help!!!

    Hello there, pacotechguy.
    The following Knoweldge Base article provides great in-depth steps for troubleshooting your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple SUpport Communities.
    Cheers,
    Pedro.

  • Sales Analysis on Item Delivery issue

    Hi Experts,
    I have another Issue regarding Deliveries at the same Client I posted this message on a few minutes ago:
    "Delivery Document not closed even though Invoice is linked"
    This issue relates to the Sales Analysis Report. When we open the Sales Analysis report on the Items Tab and select Monthly report, Delivery Notes, Individual Display and No Totals we get the report with 0 quantities for all the months selected even though there is deliveries for these items.
    Any help will be appreciated.
    Thanks,
    Marli

    Hi Marli,
    Something must be wrong within the B1 database.  You may need to restore the latest copy of the db to do more testing.
    It might be a bug or human error.
    Thanks,
    Gordon

  • Delivery Issue

    Dear Friends,
    I have created sales order to receive the Repair parts from my customer, I have done post goods receipt for the material as per the sales order, after that we have repaired the material and I have done the delivery of 10 and 30 line items, but later if I want to do delivery for the line item no20, Iu2019m getting the massage u201CNo schedule lines due for delivery up to the selected dateu201D but for all these materials schedule lines are confirmed on same date.
    This is Message no. VL248
    And also getting the Error massage u201COrder cannot be delivered (see long text)u201D
    Message no. VL461
    Can you please suggest me how to over come this issue?
    Edited by: Hari  Krishna on Jan 8, 2009 8:31 AM

    Hi,
    Go to your sales order and select item 20 and go to the schedule line.
    Over there check about the delivery date for that item or material.
    Now go to VL01n and give your shipping point then delivery date and order number.
    Check whether it is happening or not.
    Regards
    Raj.

  • How do I delete or change my number in my old iPhone, so that I can still use it for iMessages without issue?

    I have an iPhone 4S that was with Verizon. About a week ago I ported into Virgin Mobile and bought a new phone to use until the next iPhone comes out. I now still have my old iPhone, which I want to use for iMessages, as well as like an iPod, etc.
    The issue I am seeing is that my phone number is still registered to my iPhone and I haven't yet figured out how to delete it or change it. The problem this is causing is it is making my iPhone sometimes intercept messages from those with iMessage who are texting my phone number. The messages should be going to my new phone, not my iPhone, since they are texting my phone number (not my iMessage email) and my iPhone has no service connected to it.
    Here's an example of what I'm trying to say: the other day I texted a guy selling an item online. I used my new phone to text him, not my iPhone. He texted me right back, but the text went to my iPhone, not my new phone. We then texted each other via iMessage and no texts were making it to my new phone.
    I think this is also causing some messages to not go through on my new phone either, where I'm just simply not getting texts from people sending me messages. My iPhone isn't getting the messages, nor is my new phone.
    What I need to do is delete my number or put a random number in my phone so that I don't keep missing or losing texts. I saw the ways recommended to disconnect your number from iMessage, but that then kills my ability to use iMessage on my iPhone. There must be a way that the number in my iPhone can be changed or deleted. We are in 2013 I think, and this was something I always had the option of changing via manual programming on every phone I've had since 1902 or so.
    How to do this?!

    I also already deleted my phone number from iMessage on my MBP.

  • Imessage delivery record

    Is the timestamp (shown next to an imessage while the screen is dragged left) the time at which the message was delivered successfully to the recipient?
    If so, how can you tell when the recipient did not receive your message or did receive it, but as a text message (due to a limited data coverage and lack of wifi)?

    Seems it's a apple-servers issue. At least most of the people I text with got issues with it. Mostly they get sent and delivered, but on the other end they arrived even days later. Doesn't happen with every message but happens from time to time.

  • STO Outbound delivery issue

    Hi All,
    I've a intercompany customer (say ICABCD) which has Ship-to Party maintained as 12345678 (not same as Sold-to Party) in Customer master. Now when I create a I/C PO to procure goods for ICABCD and create delivery (outbound), it sets Ship-to Party in delivery as ICABCD, not 12345678. Partner determination at delivery level is perfectly fine and has no issues at all.
    As a result when I create a I/C billing document and Commercial Invoice subsequently, it gives the Ship-to Party address as ICABCD address in Commercial Invoice since it is taking VBPA-KUNNR with PARVW=SH by passing Billing document number. I know the workaround could be referring KNVP-KUNNR, PARVW=SH (and VKORG).
    But at the first place, why it is not determining the correct Ship-to Party in Delivery? Is there a solution for this? Is this the standard behavior?
    Awaiting your replies.
    Regards
    Samier Danish

    there is no extra ship-to party.
    the whole logistics customizing is between receiving plant (which is ship-to ) and sending plant (vendor).
    the sold-to does not really play any role, except it is identical with the bill-to party, this one is then mentioned in the EDI settings for invoice exchange.

  • STO delivery issue

    Hi
    I have the issue with delivery in STO.
    Have created STO order with 3 line items, delivery use to create automatically for STO's (Plant to plant with prject as account assignment category).
    For all 3 line items system should create only one delivery document number.But if i see delivery document, it has created 2 delivery, one with 1st and 3rd line and one more delivery for 2 line items in STO.
    I found below possible reasons.
    "Plant and storage location is different for materials in the STO (Plant and storage locations are same for all line items)
    Shipping point is different for materials in STO
    Insufficient stock is  SAP system on required date "
    But above reasons not matching for my issue.
    What are all other possible reason for this issue, how i can rectify this .How and where exactly we find reasons for this issue..
    Frequently this issue is occurring now for more STO order.
    It should generate only one delivery per stock transport order for all line items.
    Can some body tel me how i can rectify this and how i can achieve this?
    Thanks in Advance

    Hi,
    Thansk for your response.
    But earlier we have created more STO , we did not faced this kind of issue.
    For few orders we are getting this issue.
    So we have not changed any configuration. Since 2009 configuration for STO is same. Verified the config setting in OVLK , its already removed for delivery type (NL and NLCC and ZNL).
    Let me know , any other possible way to rectify this issue.
    Can somebody tel me , how we can locate the issue in this case. Hope more experts had crossed this kind of scenarios.
    Thanks in advance
    Edited by: MM group on Feb 29, 2012 9:02 AM

  • Partial delivery issue

    Hi All,
    I have one issue regarding partial delivery. Here I am explaining with example.
    I have customer say 10002 he has ordered products 'X' and 'Y'.
    For product 'X' qty is 20 and Product 'Y' qty is 10. Now i have created order with this products and qty. During order creation product 'X' qty was available but product 'Y' qty was not available. When I created first time delivery I have created delivery successfully for product 'X' with qty 20.
    After this delivery I have received product 'Y' stock. So second time I created a delivery for product 'Y', where in picking I have picked qty 5 instead of qty 10 then i did PGI. But I am getting system message "Delivery has not yet been put away / picked (completely)"
    I have checked my customer master in shipping tap partial delivery allowed is there. I don’t have CM info and i don't have any values in order item line shipping tap Max.paritial delivery.
    So where is going wrong. Pls help me in this regard.
    regards
    srini

    In VL02N change the delivery quantity from 10 to 5 and then do PGI.
    There error is for incompletion procedure that you have defined in your system.

  • IMessage sender issues

    I share my apple account between several devices. For some reason lately when I use iMessage it is changing the user name or the sender name from the user that it should be (me). Anyone have any ideas how to fix this so it shows as the correct sender?

    I've noticed this happening too. My wife & I both have the iPhone 4S and since we got the iPad last Friday we noticed iMessages working oddly. If I send her a message via iMessages from my phone it sometimes will show up on her phone as if she had sent it to herself. And if I'm using iMessages on the iPad the conversation automatically shows up on her phone and even an old iPhone 3GS that our son uses as an iPod touch. I thought it might be because we just got the iPad but now I'm thinking it's a wider issue.
    Any help would be great!
    Thanks.

  • Conversion process(job work - MTO) delivery issue

    Hi All,
    We are unable to create delivery for a conversion process sales order(Job work - MTO) for which stocks are reserved from 5th nov 2011. The sale order is created on 5th nov 2011.
    We are getting the following error message: Message no. VL455 "The sales order you want to deliver, sales order 1101200011 with order type ZO03, either contains no delivery-relevant items or its delivery-relevant items have already been delivered."
    For the same sale order we are able to do the delivery from 23rd nov 2011 onwards.
    But we are not able to create deliver for the materials between 5th to 23rd.
    Please could any one suggest a solution for the above issue.
    Regards
    Srinivas
    Edited by: yenigalla on Nov 4, 2011 9:15 AM

    Hie,
    This is because the schedule line in the sales order has confirmed the date for delivery as 23rd novemner. If the material is available (it should be reserved for that sales order since it is MTO) at 3rd novbr then re-run the availability check in the sales order. This will confirm the date for delivery as 3rd novbr.
    Regards,
    Denish.

Maybe you are looking for