IMessage doesn't work after changing the sim. New number isn't even recognised.

I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
How can I make it work?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
jaytee1019 wrote:
 I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Similar Messages

  • 3D Doesn't work after changing the LCD Screen

    Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
    The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
    everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
    How can i activate again the 3D or Where is the problem?
    Thanks.

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • SD Override doesn't work after changing the channel

     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

  • Imessage doesn't work after ios 6.0 update.

    My imessage doesn't work after ios 6.0 update. The white bar fills up until just a little slicer is left and then it says message failed.

    *sliver of the white bar.

  • I can not get my mouse to work after changing the batteries

    I can not get my wireless mouse to work after changing the batteries

    Some ‘dumb’ questions just so we don’t assume what you have done:
    Batteries installed with both + poles pointing to the top as you hold the mouse?
    Mouse switch has been returned to the ‘on’ position - do you see a green light?  First it will be solid green and then flashing green as the mouse tries to pair with the computer.
    Try clicking the mouse a few times as it’s trying to pair.
    If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries.  If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

  • While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    Hi there aliyan,
    I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below. 
    If you see 'No SIM' alert on iPhone
    -Griff W.

  • Will SQL Server work after changing the Machine's SID

    I have a base VM which has SQL server and a SharePoint Farm, After changing the SID of the Machine Will SQL Server and SharePoint Work ?

    Hello,
    Changing SIDs may cause some Windows functions to fail as mentioned on the following post:
    http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx
    Tools like SysPrep that change SIDs are not supported on all SQL Server features:
    http://blogs.msdn.com/b/kenkilty/archive/2013/02/22/sql-server-2012-sp1-cu2-sysprep-gotcha.aspx
    http://blogs.msdn.com/b/petersad/archive/2009/12/17/sql-server-2008-r2-sysprep-step-by-step.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • IPhoto 8.1.2 doesn't work after reinstalled the OS 10.6.8?

    iPhoto 8.1.2 doesn't work after reinstalled OS 10.6.8?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • HP Printer doesn't work after changing computers

    After a recent change to a new ASUS computer running Windows 7, I cannot get the Deskjet to print. It was working perfectly before the changeover. I have downloaded HP Print and Scan Doctor.  I am told that the driver is already in the Windows 7 software, however the Doctor reports that " the full software solution for your product is not installed on this computer".
    I have tried disconnecting and reconnecting the USB link, but with no success.  (he USB cable is linked via a cord-mounted 
    25 pinDIP connector to the Deskjet.
    It seems that no communication is happening between computer and printer.
    I'd much appreciate some helpful comment!
    Thanks
    Rodney

    Thank you for your question re my DeskJet710C printing problem.
    Yes there is a problem listed in my Device Manager Universal Serial Bus Controllers.
    It mentions an Unknown Device with Port_#0002.Hub_#0004. It says no driver files are loaded or have been required for this device.  I have tried changing this Port to 0001 without success.
    There is a similar port called USB Printing Support listed with the Device Manager, giving a Driver File:
    C:\Windows\System 32\DRIVERS\usbprint.sys    ..... but this doesn't seem to exist on my current system. 
    I have tried downloading it from the net, but without success - I guess it needs installing on the Registry (?).
    Should I use something like RegCure to get this installed?
    Many thanks 
    Rodney

  • Touch screen doesn't work after resetting the phone. Could the screen be locked?

    After following the previous  touch screen not working message, I reset the phone but still doesn't work.  Could there be a screen lock?  Or any other way for the touch screen to work?

        Hi there Angelicness3011!
    The touch screen responding correctly is pretty important for you to even use your phone! I'm sorry to learn you've been having issues with it. Let's review some options together!
    You mentioned you reset the phone. Does this mean you removed the battery & put it back in? Or does this mean you able to complete an actual Hard Reset?
    Instructions on a Hard Reset can be found here: http://bit.ly/Q00sJ9
    Your information is generally backed up to Google or Backup Assistant and your SD Card. If possible, please sign in to double check.
    If you're unable to hard reset and removing the battery doesn't resolve the concerns we may have to look in to replacement. Does your phone have any physical or liquid damage? How long have you had your phone? Do you have insurance?
    I look forward to your responses!
    Melissa_VZW
    Please follow us on twitter @VZWSupport

  • Wrt300n- wireless doesn't work after changing default IP scheme

    When I change the 192.168.1.0 default network scheme my wireless connection doesn't work to the internet I can get to the router's configuration ( I need to change for VPN reasons)  The LAN connections work fine.  Any ideas or settings that I can look at.

    Reset your router by holding down the reset button on the back for 30 sec. This should get you on the net but you will need to configure your router wireless settings to secure it. Good Luck!

  • I dropped my phone, it says no sim card and doesn't work, where is the sim card and how can I put it back in.

    Hi
    I dropped my phone, now it doesn't work says no sim card. Nothing fell out, but how do I pull the sim card out, and put it back in?

    See Here for Sim Card
    http://support.apple.com/kb/HT2309

  • Phone is turning off and on. Clock doesn't work after resetting the whole phone.

    My phone turns off and on randomly . Before it turns off  blue red green lines would appear on my screen. (Like a computer before it turns on). I've tried every reset trick you can think of. Also my clock doesn't work. It never has the right time. I've tried to reset it manually. I tried to reset the network. Help!!

    Did you also try to set it up as new device without using the backup afterwards?
    How to back up your data and set up as a new device
    If the phone works after that, restore from the backup, if it does not, you'll have to get it serviced, the problem might be hardware related.
    Apple - Support - Service Answer Center

Maybe you are looking for

  • Project Manager can´t see my .lso files

    Hello logicusers, I am new at the forum and this is my first trouble: Project Manager can´t see my .lso files. I would like to start using PM but it seems to be difficult without seeing .lso files in the navigator window. I´ve read the books, I´ve ch

  • Virtualization...what should i use?

    Hallo. I'm planning  to virtualize a Quad core / 4gb ram. I'd like to build 2-4 virtual machines for testing some advanced features of Asterisk / MySQL and some other well known softwares. I have some licenses for Asterisk addons from digium, so i'd

  • Multiple customers for same message type "invoic" and idoc type "invoic02"

    Dear Experts, I have SAP ALE process configured for single customer u2018Au2019 where I send invoic02 idoc (message type invoic) to the customer via PI server. Now I need to add one more customer u2018Bu2019 which require recepient determination. I a

  • GETTING RID OF ICONS ON SCREENS

    Is there a wasy of placing 1000 icons into the rubbish ,as by mistake I put them on the screen and they are blocking the system (the wheel goes around and around ) and cant make a new folder to drag them in . I tried opeing the photoshop file browser

  • HP printer is copying a black page with dark lines

    If someone can help to determine why my HP is copying a black page. Recently the company upgraded to Windows 7, and I am not sure if that is what caused the problem with copying. Today I uninstalled and then reinstalled the printer using the CD. That