IMessage doesn't work on my iPod 4 touch!

Last week, the first week in July it worked and I was able to send and receive messages. However, this week I couldn't get anything. Everytime I send a message it takes its sweet time and then says "message failure".  My wifi is working perfectly. I can connect to YouTube, email, and Safari. However iMessage and FaceTime does NOT work. It works fine on my Mac laptop but NOT on my iPod 4 Touch. It is infuriating! I've already tried reseting network, restarting iPod, reseting ALL SETTINGS. I've turned the iMessage settings on and off and even FaceTime too. Still it doesn't not work! I am fed up with all these issues with Apple. I can't contact anyone because they don't have an email service. If they do they make it impossible to FIND! I am very angry that I can't message anyone!
If there is an employee at Apple who can fix my issue please respond. Read my summary carefully and let me know what the issue is.
I want iMessage and FaceTime to work!

DICM1004 , your statement:"Seen Apple discontinues the iMessage and FaceTime for iOS 6, then you won't be able to access 2 Apple Services on your old iPod touch. You have to get the new iPod touch in order to continue using iMessage and FaceTime. And now on, iOS 6 is at risk."
Apple support FT amd Messages for iOS 6.1.6 on the G iPod

Similar Messages

  • HT4245 my imessage doesn't work on my ipod touch. i touch it to open and it immediately closes....help please to resolve it. it would be nice to use if it would work.

    ipod touch with iOS 6.0.1i've done everything the support site says. even reactivated it and still the same thing....nothing...like i said, it would be nice to use it if i could but now im just getting really fed up with this if i have something permanently on there that i can't use. help would be very much appreciated for me.

    This is the iPad forum. You might have better on the iPod touch forum.

  • Why doesn't my iMessage and FaceTime work on my iPod ?

    Why doesn't my iMessage and FaceTime works on my iPod?
    Help

    Withour more information:
    iOS: Troubleshooting Messages
    iOS: Troubleshooting FaceTime        
    iOS: Troubleshooting FaceTime and iMessage activation
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Updated toi IOs5.1, and now imessage doesn´t work.

    i have updated toi IOs5.1, and now imessage doesn´t work.
    what can i do??
    al actualizar el software a 5.1 no funciona imessage.
    como lo soluciono?

    I am having this issue too.  After doing all of the suggested ideas I found online, I am still stuck in "waiting for activiation" mode.  I live out of the country, and my cell phone is not connected to my carrier's network for the next month (so I really have a glorified ipod touch).
    If anyone finds a fix, please pass this info along.
    I have already tried:
    resetting network settings
    log in and out of iMessage/ Facetime
    log in and out of iCloud
    log in and out of iTunes on my phone
    full restore mode on iTunes on my computer
    HELP!!!!!!!

  • IMessage doesn't work all the time

    Hi,
    I'm using iPhone4S and noticed that recently for the past week, iMessage doesn't work when I text my husband who's using iPhone4.
    I tried switchin network (wifi and telco data) but both also doesn't work. Please advise why this is the case and how to fix it.
    SMS international is costly.
    Thanks.

    Ask him to enable his email address to receive iMessages and do the same on yours. It's in Settings > Messages.

  • Help! My iMessage doesn't work on my new iPhone 5s, I've changed my sim twice, but iMessage only works with my Apple ID.

    Recently got a new iPhone 5s and the iMessage doesn't work. I tried the sim in another phone and it didn't work either so I put a completely new sim in my iPhone and iMessage doesn't work. It will only work when I use my Apple ID for received messages. I don't know what to do. I have reset everything and it still doesn't work. My software is up to date. Please help!

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5 mm to 3.5mm jack I bought doesn't work on the ipod.

    How do I use my ipod in the car without it constantly charging?  I have to use a docking cable into the USB port because the 3.5mm to 3.5mm jack I bought doesn't work with the ipod (although it does work with an MP3 player).  My ipod is a 5th generation 80GB classic.

    I know this is old - but did you ever get this working. Thinking of getting a 780 ti card and I have an older mac with the mini-displayport too.

  • I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help :)

    I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help.
    -Reyner

    Hi chrissyfromrenton,
    you just have to close completely you Ipod (push 5-10 seconds on the button to open/close you ipod and slide the turn off) after open the ipod and it suppose to be correct I hope I answer to your question!
    Annie

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    1. Did you use Bootcamp Assistant?
    2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
    3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
    4. What year is the Retina MBP?

  • My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    Thank you soo much ! Every now and then I would check my DNS and it would say 8.8.8.8 but I just checked now and realised it was somethin something something THANK YUU SOO MUCH ! REALLY APPRECIATE IT AND YU DESERVE THOSE  49,085 points !!!

  • After upgrading to iOS 7.0 my iMessage doesn't work and it says it is "waiting for authorization". When I try to activate it, it won't connect.

    I upgraded to iOS 7.0 and now my iMessage doesn't work. My phone reads "waiting for activation" When I try signing in I get a message "Could not sign in. Please check your network connections and try again". My network connection is fine for all other applications. Any help?

    Hello Remundy,
    Thank you for the details of the issue you are experiencing with iMessage.  I recommend reviewing the following article:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IMessages doesn't work for me since 1 hour, what happen?

    iMessages doesn't work for me since 1 hour, what happen?
    I can't write 'iSMS" to anybody, but whatsapp, viber ect work as it should

    Same thing here. Any word? I've made an appointment but REALLY don't want to go all the way in.

  • IMessage doesn't work after changing the sim. New number isn't even recognised.

    I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
    I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
    How can I make it work?

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

Maybe you are looking for

  • How to add a new universe in population for Predictive Analysis

    Post Author: izhar CA Forum: Performance Management and Dashboards Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Custom

  • Publication Item on a VIEW

    Hi, Here is my problem : I have a table A in the schema A. In another schema, schema B, I have a view (VIEW B) based on the table A . My application schema for Olite is schema C. I want all my CEQ$ and CVR$ and CLG$ ables to be in schema C. I created

  • Technical names of infoobjects in infosets

    Hi, I have create an Infoset through several ODS and cubes. System automatically generates technical names starting with F, at design screen for each infoobject in ODS or cubes. But i want to see and use original tech. names of objects especialy on t

  • How to make scheduler in java?

    Dear forums, I have finished my projects currently and I want to put scheduler to know what is happening in real time and I want to it to run consistently (for sure)..and for information its (servlet + ejb->j2ee) projects. So I do not how to invoke t

  • OdiWaitForChildSession Issue

    Dear all, I am getting following error in my package; Message: com.sunopsis.dwg.function.SnpsFunctionBaseException: ODI-30066: All child sessions have failed      at com.sunopsis.dwg.tools.WaitForChildSession.actionExecute(WaitForChildSession.java:27