IMessage error on send
Both me and my girlfriend has problems with iMessage.
When at´home iMessage works perfectly when we are on the wifi, but when
we go out and is not connected to our wifi it says it cant deliver the
messages. When checking the settings "Send as SMS" is activated?
Strange, now we cant text each other because the option of sending sms
is left out, only way is to turn iMessage off.
Maybe:
iOS: Troubleshooting Messages
Similar Messages
-
I cant use imessages, it tells me that it had an error while sending a message
i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.
I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod. Any ideals?
-
How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help
How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help
Hi ashmanryan36,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are having trouble with iMessage. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
You did not mention what the error was but since you are running 8.1.2 and update is available and my help.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Cheers,
Mario -
IMessage won't send or receive pictures
iMessage won't send or receive pictures, no matter how big or small they are. Not issue sending pics from iphone or ipad. if i access the file transfer window, it shows the following message below each picture that did not go out:
NSURLSession error: The operation couldn't be completed. (NSURLErrorDomain error - 1200.) ((null))
Any ideas?
This issue started a few days ago, no changes in SW or HW ever since, so not sure what is going on.Hi,
Try zipping/Compressing the files or pic first.
Other people are having the issue and the zipping is the only work around we have discovered so far.
8:55 pm Sunday; April 26, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
IMessage bizarre behavior sending messages to one family member
I need help figuring out how to resolve a very annoying anomaly I am experiencing with iMessage involving only one family member. All 5 family members use Apple products - combination of iPhones, Macs, iPads. Everyone has their own unique Apple ID and everyone has set up their iMessage accounts to send from their phone numbers when starting a new message thread.
I am unable to reply to iMessages initiated by one of the family members from their iPhone when viewing it on my Mac and can only carry on a conversation with them to their iPhone when I start the thread. When she starts the thread from her iPhone, her name in the To: field turns to a red color and when I try to reply I get an error message: "Your message could not be sent. xxx email address is not registered with iMessage." Their xxx email address that is listed is associated with an Apple ID of theirs that they don't use anymore, even though the message they send from the iPhone is sent with their phone number. When they start a message thread to me from their iPad I get it just fine and can reply.
This makes absolutely no sense - none of the other family members have this issue. And the issue seems confined to messages she starts from iPhone and that I try to respond to from my Mac.
Not sure how to even attempt to fix this. I could ask her to turn off iMessages from her iPhone and turn it back on - don't know how to try the same thing on my Mac.
Thoughts/recommendations? Thanks in advance.Be specific.
Everyone? or Every Device?
If every device, does that mean you can no longer share apps?
KiltedTim wrote:
You have configured multiple devices to use the same AppleID for iMessage.
Don't do that. iMessage is designed to sync messages between all devices configured with the same Apple ID.
Everyone should have their own Apple ID. They were never designed to be shared. -
My iMessages have stopped sending messages. It doesn't show any error, But message doesn't get delivered. Help?
Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
Step 1
Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
Step 2
Log out of your user account and log back in.
Step 3
Boot in safe mode and test, then reboot as usual and test again.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. -
Error on sending email: this._attachmentWidgets
Error on sending mail. Under Opera 12.12 and Windows 7, whenever I send a message through Verizon's web email, I get the message "Cannot convert 'this._attachmentWidgets to object"
I get this message with or without attachments on the email.I have the same problem with Opera 12.15
All the Opera 12.xx versions are similar.
After my email is sent.
A Verizon java pop-up displays:
Cannot convert 'this._attachmentWidgets' to object
But the email is sent and I have tried stripping some of the codes.
Looks like VZ does not like Opera -
When sending a text via normal texting ( I turn my mobile data off whilst out and not on WiFi so I am not using IMessage ) I can send the message without a problem. However when the text reaches the person ive sent it to and they reply,I don't always receive the text they have replied with. I have tried doing simple things like turning the mobile data on and off again and nothing has changed,still not receiving all the texts I get sent. Any idea why this could be happening?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
If the issues continue, you may need to consider restoring as new. -
While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.https://support.mozilla.org/en-US/kb/cannot-send-messages
-
Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?
Yes, if both devices is using the same apple id for imessage.
-
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
Error while sending a message 501 not implemented
Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advanceHi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
... 20 more -
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
Error while sending the email notifcation
Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Vector.java:427)
at javax.mail.Multipart.getBodyPart(Multipart.java:157)
at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy346.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
Addressed to : EMAIL:[email protected],
UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
Gateway message Id : ,
Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM
Maybe you are looking for
-
Can anyone explain how they made this Jar file
Hi all, I have searched the forum without luck. Lots of people asked questions about protecting their jar files but almost everyone said to either use exe file or use obfuscators. But how can I make my jar so it is not possible to open it or when you
-
How do I stop purchased music downloads once they've started?
Just bought the machine. Saw all my puchased music and went crazy. Hit the icon on adout half ofthem. Now it appears it will take until the apocolyse for them all to download. How can I stop this process and merelymigrate the music onto my machine fr
-
Can I use Links list to make a selection in a finder window?
I have a .indd file with about 75 placed graphics. The graphics are in a folder with 150+ images. I want to delete all the unused images from this folder. Is there a way to "select in finder" those images included in the indd file? I'm trying to avoi
-
Build and go on Device under Debug error
When I try to build and go an application I made on my device (iPod Touch) I get the error Command usr/bin/codesign failed with exit code 1 Help would be appreciated, Mr. Man
-
Is There a Program that can compress tracks and Cds into one long tra
I have a couple long audio books and I would like to have it all in one track.