IMessage Fail suddenly from yesterday
My iMessage (from iPhone 4S) fail suddenly from yesterday afternoon. When I try to send out the mssage it's always failed finally with a red alarm. Even I turn on the option of "send as text message" it would not be send out vis SMS. Why? And the iMessage from other persons to me also can be arrived. I reboot the iPhone and re-active the iMessage service. But it doesn't work yet.
Okay, if anyone views this issue - I managed to fix it by removing my email accounts and I also put an empty pre-paid simcard in the iphone, it probably had more to do with the former than the latter but either way it's fixed, sms now going to Galaxy.
Similar Messages
-
my speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?
I got this problem solved and just want to let others know what it was.
I followed ewdel1's advice and brought my phone in to have it looked at and sure enough, was told that this is a problem others have had and it was due to a faulty integrated circuit. Luckily, I was able to take this in to be looked at when I did because my 1 year warranty was about to expire in a week.
Apple replaced my 4S with a "new" phone. The replacement looks and works good as new, so happy I didn't have to go through a hassle and the replacement was very straightforward. -
I cannot send or receive imessages from one person. Could the fact that I have hundreds and hundreds of messages to and from this person on my phone be the cause? Thanks.
Jas on wrote:
AAm I the only frustrated enough with this iMessage fail issue to consider jumping back to Android?
Since I'm having no issues with iMessage, I'm not frustrated at all.
Perhaps instead of assuming we all know what you're talking about, or that we're having any kind of similar issue, how about you take a moment to explain your particular issue? -
My phone has been smashed I need to get records of all my iMessages and texts from the last month. How do I get these?
Do you have a backup of your iPhone which contains these messages?
If so, you can restore a new iPhone from that backup during setup.
If not, the messages are gone. -
I work for a university and teach IT courses to undergrad and graduate students. The details below are pertaining an isolated lab environment
I had a storage failure in my lab and the DCs became corrupt. This is a university lab environment so there isn't anything crucial on here. I just would rather avoid rebuilding the domain/forest and would rather use this as a learning experience with my
students...
So after the storage failed and was restored, the VMs hosted became corrupt. I did a NTDSUTIL to basically repair the NDTS.dit file but one of my DCs reverted to a state before DC promotion. Naturally, the domain still had this object in AD. After numerous
failed attempts at trying to reinstall the DC on the server through the server manager wizard in 2012 R2, I decided that a metadata cleanup of the old failed object was necessary.
Utilizing this article, I removed all references of the failed DC from both AD and DNS (http://www.petri.com/delete_failed_dcs_from_ad.htm)
So now that the failed object is removed completely from the domain and the metadata cleanup was successful, I then proceeded to re-install the necessary AD DS role on the server and re-promote to the existing domain. Pre-Requisites pass but generate some
warning around DNS Delgation, and Dynamic Updates (delegation is ignored because the lab is isolated from external comms, and dynamic updates are in fact enabled on both my _msdcs and root domain zones).
Upon the promotion process, I get the following error message (also worth mentioning - the account performing these operations is a member of DA, EA, and Schema Admins)
The operation failed because:
Active Directory Domain Services could not create the NTDS Settings object for this Active Directory Domain Controller CN=NTDS Settings,CN=domainVMDC1,CN=Servers,CN=Default-
First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu on the remote AD DC domainVMDC2. Ensure the provided network credentials have sufficient permissions.
"While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync."
As you can see, this error seems odd considering. Now that I'm down to a single DC and DNS server, the sync should be corrected. I've run a repadmin /syncall and it completed successfully. Since then, I've run dcdiags and dumped those to a text as well and
here are my results...
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = domainVMDC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\domainVMDC2
Starting test: Connectivity
......................... domainVMDC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\domainVMDC2
Starting test: Advertising
......................... domainVMDC2 passed test Advertising
Starting test: FrsEvent
......................... domainVMDC2 passed test FrsEvent
Starting test: DFSREvent
......................... domainVMDC2 passed test DFSREvent
Starting test: SysVolCheck
......................... domainVMDC2 passed test SysVolCheck
Starting test: KccEvent
......................... domainVMDC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... domainVMDC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... domainVMDC2 passed test MachineAccount
Starting test: NCSecDesc
......................... domainVMDC2 passed test NCSecDesc
Starting test: NetLogons
......................... domainVMDC2 passed test NetLogons
Starting test: ObjectsReplicated
......................... domainVMDC2 passed test ObjectsReplicated
Starting test: Replications
......................... domainVMDC2 passed test Replications
Starting test: RidManager
......................... domainVMDC2 passed test RidManager
Starting test: Services
......................... domainVMDC2 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x00001795
Time Generated: 12/18/2014 00:35:03
Event String:
The program lsass.exe, with the assigned process ID 476, could not authenticate locally by using the target name ldap/domainvmdc2.domain.school.edu. The target name used is not valid. A target name should
refer to one of the local computer names, for example, the DNS host name.
......................... domainVMDC2 passed test SystemLog
Starting test: VerifyReferences
......................... domainVMDC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
For the partition
(DC=ForestDnsZones,DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=3098109a-ff99-41d4-8926-0e814ac8efde,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... ForestDnsZones failed test CheckSDRefDom
Starting test: CrossRefValidation
For the partition
(DC=ForestDnsZones,DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=3098109a-ff99-41d4-8926-0e814ac8efde,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... ForestDnsZones failed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
For the partition
(DC=DomainDnsZones,DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=2f0b8ac0-2630-441a-891f-b5fcb91498a8,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... DomainDnsZones failed test CheckSDRefDom
Starting test: CrossRefValidation
For the partition
(DC=DomainDnsZones,DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=2f0b8ac0-2630-441a-891f-b5fcb91498a8,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... DomainDnsZones failed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
For the partition
(CN=Schema,CN=Configuration,DC=domain,DC=school,DC=edu) we
encountered the following error retrieving the cross-ref's
(CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... Schema failed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
For the partition
(CN=Configuration,DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... Configuration failed test CrossRefValidation
Running partition tests on : domain
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
For the partition (DC=domain,DC=school,DC=edu) we encountered
the following error retrieving the cross-ref's
(CN=domain,CN=Partitions,CN=Configuration,DC=domain,DC=school,DC=edu)
information:
LDAP Error 0x52e (1326).
......................... domain failed test CrossRefValidation
Running enterprise tests on : domain.school.edu
Starting test: LocatorCheck
......................... domain.school.edu passed test
LocatorCheck
Starting test: Intersite
......................... domain.school.edu passed test Intersite
From what I can gather, there is a definite DNS issue but I don't have any stale records to the old DC stored anywhere. I've tried this with a new server as well and get similar errors...
At this rate I'm ready to rebuild the entire forest over again. I'm just reluctant to do so as I want to make this a learning experience for the students.
Any help would be greatly appreciated. Thanks!As you can see, there seems to be some errors. The one that I did correct was the one around the _msdcs NS record being unable to resolve. For whatever, reason the name wasn't resolving the IP but all other NS tabs and records were. Just that one _msdcs
sub-zone. Furthermore, the mentioning of any connections to root hint servers can be viewed as false positives. There is no external comms to this lab so no communication with outside IPs can be expected. Lastly, they mentioned a connectivity issue yet mention
that I should check the firewall settings. All three profiles are disabled in Windows Firewall (as they have been the entire time). Thank you in advance for your help!
C:\Windows\system32>dcdiag /test:dns /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine domainVMDC2, is a Directory Server.
Home Server = domainVMDC2
* Connecting to directory service on server domainVMDC2.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=domainVMDC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=school,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\domainVMDC2
Starting test: Connectivity
* Active Directory LDAP Services Check
The host
3a38b19c-4bb3-4542-acb6-9e5e97cc15c4._msdcs.domain.school.edu
could not be resolved to an IP address. Check the DNS server, DHCP,
server name, etc.
Got error while checking LDAP and RPC connectivity. Please check your
firewall settings.
......................... domainVMDC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\domainVMDC2
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... domainVMDC2 passed test DNS
Running partition tests on : ForestDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : DomainDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Schema
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Configuration
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : domain
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running enterprise tests on : domain.school.edu
Starting test: DNS
Test results for domain controllers:
DC: domainVMDC2
Domain: domain.school.edu
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
Error: No LDAP connectivity
The OS
Microsoft Windows Server 2012 R2 Datacenter (Service Pack level: 0.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000010] vmxnet3 Ethernet Adapter:
MAC address is 00:50:56:A2:2C:24
IP Address is static
IP address: *.*.100.26
DNS servers:
*.*.100.26 (domainVMDC2) [Valid]
No host records (A or AAAA) were found for this DC
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Invalid (unreachable)]
Name: c.root-servers.net. IP: 192.33.4.12 [Invalid (unreachable)]
Name: d.root-servers.net. IP: 199.7.91.13 [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Invalid (unreachable)]
Name: f.root-servers.net. IP: 192.5.5.241 [Invalid (unreachable)]
Name: g.root-servers.net. IP: 192.112.36.4 [Invalid (unreachable)]
Name: h.root-servers.net. IP: 128.63.2.53 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Invalid (unreachable)]
Name: j.root-servers.net. IP: 192.58.128.30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 202.12.27.33 [Invalid (unreachable)]
Error: Both root hints and forwarders are not configured or
broken. Please make sure at least one of them works.
TEST: Delegations (Del)
Delegation information for the zone: domain.school.edu.
Delegated domain name: _msdcs.domain.school.edu.
Error: DNS server: domainvmdc2. IP:<Unavailable>
[Missing glue A record]
[Error details: 9714 (Type: Win32 - Description: DNS name does not exist.)]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone domain.school.edu
Warning: Failed to delete the test record dcdiag-test-record in zone domain.school.edu
[Error details: 13 (Type: Win32 - Description: The data is invalid.)]
TEST: Records registration (RReg)
Network Adapter [00000010] vmxnet3 Ethernet Adapter:
Matching CNAME record found at DNS server *.*.100.26:
3a38b19c-4bb3-4542-acb6-9e5e97cc15c4._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.a9241004-88ea-422d-a71e-df7b622f0d68.domains._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kerberos._tcp.dc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.dc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kerberos._tcp.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kerberos._udp.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kpasswd._tcp.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.Default-First-Site-Name._sites.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_kerberos._tcp.Default-First-Site-Name._sites.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.gc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_gc._tcp.Default-First-Site-Name._sites.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.domain.school.edu
Matching SRV record found at DNS server *.*.100.26:
_ldap._tcp.pdc._msdcs.domain.school.edu
Error: Record registrations cannot be found for all the network
adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 128.63.2.53 (h.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.63.2.53
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.112.36.4 (g.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.112.36.4
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.203.230.10 (e.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.203.230.10
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.228.79.201 (b.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.228.79.201
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.33.4.12 (c.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.33.4.12
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.36.148.17 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.36.148.17
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.5.5.241 (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.5.5.241
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.58.128.30 (j.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.58.128.30
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 193.0.14.129 (k.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 193.0.14.129
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 198.41.0.4 (a.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 198.41.0.4
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 199.7.83.42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 199.7.83.42
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 199.7.91.13 (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 199.7.91.13
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 202.12.27.33 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 202.12.27.33
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: *.*.100.26 (domainVMDC2)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: domain.school.edu
domainVMDC2 PASS FAIL FAIL FAIL WARN FAIL n/a
......................... domain.school.edu failed test DNS
Test omitted by user request: LocatorCheck
Test omitted by user request: Intersite -
My IMessage is sending from my email, and I am recieving
Messages thru my email. I have tried to fix this by going to Settings > messaging > recieved at> and my phone number pops up along with my email. It will let me click on my email, but my phone number is greyed out and I can't click on it.i have also tried caller id, which still didn't fix the problem.
Trying to kill two birds with one stone, my phone also says that I have no storage left. I literally have 3 apps installed on my phone. Facebook, Twitter, and instagram. I only have 52 photos, 0 videos, and about 115 songs. I know for a fact that I shouldn't be out of storage, because I have friends with the same iPhone 4, that have 400 pictures, a thousand songs, and page after page of apps. I want to know what is taking up all of the storage, and what can I do to get rid of it. Thank you in advanceSorry G23 - I like birds ;)
I suggest you start another thread as I don't know the answer to that one but this might help:
Go to settings - general - usage - Her e you might find some data hogs
Good luck -
I have deleted playlists from my iphone4 that I wish to restore. The current back up does not contain them either. Can I use a back up from yesterday? How do I find it on my laptop?
No iTunes content is included in any iPhone backup. If the playlists are not in your iTunes library, on your computer, they are gone.
-
I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
Huge drop in speed from yesterday
Hi
I posted on here a while back and received a lot of good advise about many BB issues that can be "unleashed" on the unsuspecting. Since then, I must be honest, my line has been quite stable and the speeds remained constant, that is until this morning.
The first figures are from last nights speedtester results
Test Results
This Test comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
6080 kbps
0 Kb 7150 Kbps Max Achievable Speed
Download speed achieved during the test was- 6080 Kbps
For your connection. the acceptable range of Kbps W ii 600-7150 lCbps.
Additional Information:
Your DSL Connection Rate :7616 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 6500 Kbps ______________ ________________
2. Assured Rate Test: -provides background information.
Download Speed
524 Kbps
600 Kbps
0Kbps
Max Achievable Speed
Download sp.edachi.v.d during the test was 524 kbps
For your connection. The. acceptable range of speedsI is 576-600 lcbps.
Additional Information:
Assured Rate IP profile on your line is - 600 Kbps
This test was not conclusive and further testing Is r•quired.Thls might be useful For your ISP to mv
If you wish to carry out further tests,please click on Continue button.If not, please dose the win with these results.
Please visit E2 section if you are unable To understand the test results.
The next reading is from this morning when I was trying to open e-mails and noticed it was taking forever, and then only got the usual spam, so no big downloads.
Test Results
This Test comprises of two tests
1. Best Effort Test: @ -provides background information.
Download Speed
1938 Kbps
0Kbps 7150 Kbps Max Achievable Speed
Download speedöachieved during the test was - 1938 Kbps
For your connection, the acceptable range of speedsêi is 500-7150 Kbps.
Additional Information:
Your DSL Connection Rate :7516 Kbps(DQWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 6500 Kbps _________
2. Assured Rate Test: U -provides background information.
Download Speed
535 Kbps
600 Kbps
0Kbps
Max Achievable Speed
Download speed @achieved during the test was - 535 Kbps
For your connection, the acceptable range of speedsU is 575-600 Kbps
Additional Information:
Assured Rate IP profile on your line is - 500 Kbps
This test was not conclusive and further testing is required .This might be useful for your ISP to investigate
As I cannot run another Speedtester for a few hours I have "binned" the HH2 after reading all about many issues and gone over to my BB Business Router as used by GD. I will now monitor the readings from that to see if there is anything untoward happening, and post later if required.
In the meantime, can anyone suggest why there should be such a huge drop from yesterday, as all the profiles have remained the same? I had not changed anything prior to the test and there are no issues from my end.
Steve
The older I get, the faster I was!hi steve,
um one word would explaing hte change in achieved download speed and that is ;
congestion
your stats havend changed only the availability of bandwidth for data throughput, its quite common on exchanges with lots of connections for htis to happen during peek times (all day at weekends and roughly 5pm>midnight weekdays)
that you should see such a dramatic change would suggest that a lot of people are online at the same time in your area and all sharing the same ammount of bandwitch capacity.
it could be casued by an equipment failure or just the sheer number of connections stretching available capacity beyond normal parameters, changing routers would do little to change that, the other option is you tried to run the test when you had something using internet bandwidth at your property
the fact your sync speed is virtually the same and your ip profile has remaind the same would also indicate this as opposed to any real problems with hardware
and omfg you actually achieved a download of near ip profile numbers i want your connection rates / -
Agreement lookup failed as From trading partner cannot be identified
Hi,
I am working on custom document over HTTPS.
I configured B2B to send custom document over Generic Exchange(transport - HTTPS).
I enqueue the XML document with AQ header to IP_OUT_QUEUE. B2B is able to read the data from IP_OUT_QUEUE and invokes the client Webapplication.
I changed the IP_OUT_QUEUE to custom AQ. B2B is able to read data from custom AQ, but B2B throws "Trading partner agreement lookup failed as From trading partner cannot be identified"
b2b.log:
2010.02.15 at 13:03:44:470: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.02.15 at 13:03:44:471: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.02.15 at 13:03:44:497: Thread-22: B2B - (DEBUG)
Protocol = AQ
Version = null
Transport Header
aq.receiver.expiration:-1
aq.receiver.delay:0
aq.receiver.priority:1
aq.receiver.correlation:b2buser
2010.02.15 at 13:03:44:881: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.02.15 at 13:03:44:907: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2010.02.15 at 13:03:44:921: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
2010.02.15 at 13:03:45:069: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppInterfaceListener:onMessage calling processOutgoingMessage
2010.02.15 at 13:03:45:069: Thread-22: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.15 at 13:03:45:071: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.15 at 13:03:45:076: Thread-22: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdnull
2010.02.15 at 13:03:45:094: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 1
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is 0A4DBD67126D1BA2FC700000136A1AD0
2010.02.15 at 13:03:45:099: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: null Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:101: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: Acme Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:113: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: null docTypeRevision: null
2010.02.15 at 13:03:45:118: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: null actionRevision: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Set actionRevision in MessageInfo: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Obtain DocType using actionName and actionRevision.
2010.02.15 at 13:03:45:124: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : null Activity Version: null
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<null>
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2010.02.15 at 13:03:45:126: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: Acme Type: null Value: null to TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2010.02.15 at 13:03:45:129: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-Acme-null To Party -> null-null-null-null Business Action name -> null
2010.02.15 at 13:03:45:130: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.02.15 at 13:03:45:209: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2010.02.15 at 13:03:45:211: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2010.02.15 at 13:03:45:212: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2010.02.15 at 13:03:45:353: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2010.02.15 at 13:03:45:354: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2010.02.15 at 13:03:45:367: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2010.02.15 at 13:03:45:397: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.02.15 at 13:03:45:398: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.02.15 at 13:03:45:471: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2010.02.15 at 13:03:45:476: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.15 at 13:03:45:485: Thread-22: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD67126D1BA2FC700000136A1AD0</b2bMessageId>
<errorCode>AIP-50548</errorCode>
<errorText>Trading partner agreement lookup failed as From trading partner cannot be identified</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgda21a)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.02.15 at 13:03:45:512: Thread-22: B2B - (DEBUG) Engine:notifyApp Exit
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) DBContext commit: Enter
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Leave
Kindly help me to resolve this issue.hi Anuj,
I am enqueuing from BPEL process. I have set the AQ header.
<b2bMsgHeader><Header xmlns="http://xmlns.oracle.com/pcbpel/adapter/aq/publishB2BMessage/">
<QueueHeader/>
<PayloadHeader>
<MSG_ID xmlns="">2SY16SY_TEST_FEB15_07E01null2010021513270041</MSG_ID>
<INREPLYTO_MSG_ID xmlns=""/>
<FROM_PARTY xmlns="">Acme</FROM_PARTY>
<TO_PARTY xmlns="">GlobalChips</TO_PARTY>
<ACTION_NAME xmlns="">ProcessBusiness</ACTION_NAME>
<DOCTYPE_NAME xmlns="">DocType</DOCTYPE_NAME>
<DOCTYPE_REVISION xmlns="">1.0</DOCTYPE_REVISION>
<MSG_TYPE xmlns="">1</MSG_TYPE>
<PAYLOAD xmlns="">XML payload</PAYLOAD>
<ATTACHMENT xmlns=""/>
</PayloadHeader>
</Header>
</b2bMsgHeader> -
Trading partner agreement lookup failed as From trading partner cannot be i
Hi,
I am sending 850 EDI XML to our Penske trading partner, Its throwing below error. Could anyone helpme how to resolve this issue. Please do the needful.
our sender id is EMR and receiver id is Penske( I am also attaching a file which i am processing)
Machine Info: (essapt020-u009.emrsn.com)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
File which i processed
<?xml version="1.0" ?>
- <Transaction-850 xmlns="urn:oracle:integration:b2b:BD5A9C92A91F474292233E610E5258F9" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2009-09-14T06:20:48" CreatedBy="ECXEngine_837" GUID="{3A6795B0-F6A0-DE11-B354-00144F86C7D4}">
- <Internal-Properties>
- <Data-Structure Name="Interchange">
<Lookup Name="InterchangeSenderQual">ZZ</Lookup>
<Lookup Name="InterchangeSenderID">EMR</Lookup>
<Lookup Name="InterchangeReceiverQual">ZZ</Lookup>
<Lookup Name="InterchangeReceiverID">Penske</Lookup>
<Lookup Name="InterchangeControlVersion">00401</Lookup>
<Lookup Name="Standard">X12</Lookup>
<Property Name="InterchangeAuthorizationInfoQual">00</Property>
<Property Name="InterchangeAuthorizationInfo" />
<Property Name="InterchangeSecurityInfoQual">00</Property>
<Property Name="InterchangeSecurityInfo" />
<Property Name="InterchangeSenderQual">ZZ</Property>
<Property Name="InterchangeSenderID">EMR</Property>
<Property Name="InterchangeReceiverQual">ZZ</Property>
<Property Name="InterchangeReceiverID">Penske</Property>
<Property Name="InterchangeDate">090909</Property>
<Property Name="InterchangeTime">1419</Property>
<Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property>
<Property Name="InterchangeControlVersion">00401</Property>
<Property Name="InterchangeControlNumber">000085390</Property>
<Property Name="InterchangeAckRequested">0</Property>
<Property Name="InterchangeUsageIndicator">P</Property>
<Property Name="InterchangeComponentElementSep">0x3e</Property>
<Property Name="DecimalSeparator" />
<Property Name="ElementDelimiter">0x2a</Property>
<Property Name="ReleaseCharacter" />
<Property Name="RepeatingSeparator" />
<Property Name="SegmentDelimiter">0x7e</Property>
<Property Name="SubelementDelimiter">0x3e</Property>
<Property Name="InterchangeChildCount">1</Property>
<Property Name="InterchangeTrailerControlNumber">000085390</Property>
- <Data-Structure Name="Group">
<Lookup Name="GroupSenderID">EMR</Lookup>
<Lookup Name="GroupReceiverID">Penske</Lookup>
<Lookup Name="GroupVersionNumber">004010</Lookup>
<Property Name="GroupID">PO</Property>
<Property Name="GroupSenderID">EMR</Property>
<Property Name="GroupReceiverID">Penske</Property>
<Property Name="GroupDate">20090909</Property>
<Property Name="GroupTime">1419</Property>
<Property Name="GroupControlNumber">85364</Property>
<Property Name="GroupAgencyCode">X</Property>
<Property Name="GroupVersionNumber">004010</Property>
<Property Name="GroupChildCount">1</Property>
<Property Name="GroupTrailerControlNumber">85364</Property>
- <Data-Structure Name="Transaction">
<Lookup Name="TransactionID">850</Lookup>
<Property Name="TransactionID">850</Property>
<Property Name="TransactionControlNumber">0001</Property>
<Property Name="TransactionImplementationReference" />
<Property Name="TransactionChildCount">24</Property>
<Property Name="TransactionTrailerControlNumber">0001</Property>
</Data-Structure>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
- <Segment-ST>
<Element-143>850</Element-143>
<Element-329>0001</Element-329>
</Segment-ST>
- <Segment-BEG>
<Element-353>00</Element-353>
<Element-92>SA</Element-92>
<Element-324>16010055985</Element-324>
<Element-328 xsi:nil="true" />
<Element-373>20090909</Element-373>
<Element-367 xsi:nil="true" />
<Element-587>AC</Element-587>
<Element-1019 xsi:nil="true" />
<Element-1166 xsi:nil="true" />
<Element-1232 xsi:nil="true" />
<Element-786>03</Element-786>
</Segment-BEG>
- <Segment-CUR>
<Element-98>2L</Element-98>
<Element-100>USD</Element-100>
</Segment-CUR>
- <Segment-REF>
<Element-128>06</Element-128>
<Element-127 xsi:nil="true" />
<Element-352>ALICE.EMRSN.COM:oracle.apps.po.event.xmlpo:458153-325924</Element-352>
</Segment-REF>
- <Segment-FOB>
<Element-146>CC</Element-146>
<Element-309>ZZ</Element-309>
<Element-352>UCC FOB DEST COL</Element-352>
<Element-334 xsi:nil="true" />
<Element-335 xsi:nil="true" />
<Element-309_1>ZZ</Element-309_1>
<Element-352_1>FOB Shipping Point</Element-352_1>
</Segment-FOB>
- <Segment-ITD>
<Element-336 xsi:nil="true" />
<Element-333 xsi:nil="true" />
<Element-338 xsi:nil="true" />
<Element-370 xsi:nil="true" />
<Element-351 xsi:nil="true" />
<Element-446 xsi:nil="true" />
<Element-386 xsi:nil="true" />
<Element-362 xsi:nil="true" />
<Element-388 xsi:nil="true" />
<Element-389 xsi:nil="true" />
<Element-342 xsi:nil="true" />
<Element-352>NET75 EOM</Element-352>
</Segment-ITD>
- <Loop-N1>
- <Segment-N1>
<Element-98>VN</Element-98>
<Element-93>XPEDX</Element-93>
<Element-66>US</Element-66>
<Element-67>160000511</Element-67>
</Segment-N1>
- <Segment-N3>
<Element-166>2099 CORPORATE 44 DRIVE</Element-166>
</Segment-N3>
- <Segment-N4>
<Element-19>FENTON</Element-19>
<Element-156>MO</Element-156>
<Element-116>63026</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>BT</Element-98>
<Element-93>EMC OU CIM</Element-93>
</Segment-N1>
- <Segment-N3>
<Element-166>Emerson Motor Company,</Element-166>
<Element-166_1>a Division of Emerson Electric Co. PO BOX 4147</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Saint Louis</Element-19>
<Element-156>MO</Element-156>
<Element-116>63136</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>SO</Element-98>
<Element-93>EMC OU CIM</Element-93>
</Segment-N1>
- <Segment-N3>
<Element-166>8100 West Florissant Ave</Element-166>
<Element-166_1>PO Box 3946</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Saint Louis</Element-19>
<Element-156>MO</Element-156>
<Element-116>63136</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>CA</Element-98>
<Element-93>SEE EMERSON ROUTING</Element-93>
</Segment-N1>
</Loop-N1>
- <Loop-PO1>
- <Segment-PO1>
<Element-350>1</Element-350>
<Element-330>4800</Element-330>
<Element-355_1>EA</Element-355_1>
<Element-212>116</Element-212>
<Element-639 xsi:nil="true" />
<Element-235_1 xsi:nil="true" />
<Element-234_1 xsi:nil="true" />
<Element-235_2>SW</Element-235_2>
<Element-234_2>P062155530000</Element-234_2>
</Segment-PO1>
- <Loop-PID>
- <Segment-PID>
<Element-349>F</Element-349>
<Element-750 xsi:nil="true" />
<Element-559 xsi:nil="true" />
<Element-751 xsi:nil="true" />
<Element-352>PAD (BOX)</Element-352>
</Segment-PID>
</Loop-PID>
- <Loop-N1_2>
- <Segment-N1>
<Element-98>ST</Element-98>
<Element-93>CIM IO Plant CMD</Element-93>
<Element-66>FA</Element-66>
<Element-67>INTERNALC01</Element-67>
</Segment-N1>
- <Segment-N3>
<Element-166>Boul Carlos Salinas de Gortari</Element-166>
<Element-166_1>Kilometro 9.7</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Apodaca</Element-19>
<Element-156>NL</Element-156>
<Element-116>66600</Element-116>
<Element-26>MX</Element-26>
</Segment-N4>
- <Segment-SCH>
<Element-380_2>4800</Element-380_2>
<Element-355>EA</Element-355>
<Element-98_1 xsi:nil="true" />
<Element-93 xsi:nil="true" />
<Element-374_5>112</Element-374_5>
<Element-373>20090910</Element-373>
<Element-337 xsi:nil="true" />
<Element-374 xsi:nil="true" />
<Element-373_1 xsi:nil="true" />
<Element-337_1 xsi:nil="true" />
<Element-326 xsi:nil="true" />
<Element-350>1</Element-350>
</Segment-SCH>
</Loop-N1_2>
</Loop-PO1>
- <Loop-CTT>
- <Segment-CTT>
<Element-354>1</Element-354>
</Segment-CTT>
</Loop-CTT>
- <Segment-SE>
<Element-96>24</Element-96>
<Element-329>0001</Element-329>
</Segment-SE>
</Transaction-850>Hi Srinivas,
I am in dilemaaa whether i need to take a EDI x12 over internet and EDI x12 over genric exchange.I think this is something which you should discuss with your TP and as per the availability and requirement a decision should be made.
If you are using FTP protocol in internal delivery channel, then you need to follow the file naming convention to provide B2B required information to identify the TP and transaction. For this please refer -
http://www.b2bgurus.com/search/label/Generic%20File
To know more about TP identification in EDI, please refer -
http://www.b2bgurus.com/2007/08/trading-partner-identification-in-edi.html
Regards,
Anuj -
Trading partner agreement lookup failed as From trading partner cannotbeide
Machine Info: (essapt020-u009.emrsn.com)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
I am getting an above error, while procssing data to our trading partner
regards
srinivasHi Srinivas,
I think you have one more thread opened for the same -
Trading partner agreement lookup failed as From trading partner cannot be i
Anyways, as I mentioned earlier in above thread, please follow proper file naming convention to allow B2B to identify the Trading Partner.
Regards,
Anuj -
Why do I get iMessage failed update date and time in settings
My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings. I have update it several times and it's keep doing it. Now it's just frustrating. How can I take care of this problem for good.
I have also been getting the message ever since I got my iPhone 5 on September 12. I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.
-
IMessages dont go from my iPhone 4S to my Ipad 1 both running iOS5 and same log in account
how do i makes my imessages show up from my iphone to my ipad? ive sent a message from my ipad that works, however im supposed to be able to pick up one conversation on my iphone and finish it on my ipad and such. icloud is on on both devices, both devices have the same account logged in, and imessage is on, on both devices, pease help!
My understanding is that for this to work: 1) You need to be using the exact same Apple ID on both devices. This includes the me.com and mac.com variants for iCloud, if you are using an iCloud ID as the Apple ID for iMessage; and 2) You need to set the callerID on the both devices to the same Apple ID, not an alternate ID or the phone number (on the iPhone). To check the latter go to Settings, Messages, Receive At, Caller ID, and make sure same Email address rather than the phone number or a different Email address is checked on each device.
Steve -
Guys...
I can't buy coins in the game from yesterday morning. Why? N what should I do?
ASAP
TQB4when I try to buy coins
It says:
"Your Purchased could not be completed. Contact iTunes Store suport to complete this transaction."
Maybe you are looking for
-
I want to use Berkely database for my Dissertation
Hello everyone, I am having some doubts regarding Berkely database. Actually, I am using this database for my project. The scenario of the project is, I have developed some business rules depending on the concept of Ripple Down Rules and represented
-
IW32- order-print is giving error for particular User.
Dear Friends, IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post. Thanks In
-
Aperture 3 Geotagging - Very Disappointing Lack Of Functionality
I'm very disappointed that the geotagging feature in Aperture 3 still doesn't allow me to specify a gpx file and then automatically tag photos as they are imported. I know that there are plug-ins available for geotagging, but they are overly-function
-
Hi All, I want to know something about Repository variable: 1. What is Repository Variable? 2. What is the use of it and benefit of it? 3. Can we use it in reporting side or only repository side? 4. Can u give me one example of reposi
-
Part 1 not Post for excess of qty
Hi. I have one problem during STO When i despetch 1 Material total of 108 KG in different batch say B1(40),B2(41) and B3(27) I make delivery say DEL1 I make excise invoice say EXC1 for qty 108 for three batch when i go for MIGO against outbound deliv