IMessage involuntary message deletion

Hi All,
I don't know where this is best put so moderators, apologies if this needs to be moved.  My fundamental problem is that iMessage receives messages and then unexplainably deletes them.  This morning, I lost my most recent 15 minutes worth of conversation from iMessages on my Mountain Lion MacBook Pro. 
It appears as if this problem happens during synchronization with my ios devices linked to the same account.  I have an iPhone 4S (on the most recent OS) and an original iPad (which is on the latest release of ios 5.x as ios 6 wasn't permitted for it).  All of the devices are using wifi only.  As I see the other devices populate with messages at times, I lose messages on other devices.  I don't see a 1 for 1 comparison- it seems random to me. 
Has anyone else had this problem?  Is there something I can do to fix this?  Thanks!
Cheers,
Brian

Hi,
Where can I find the value below descripted?
For the central and decentral Adapter Engine(s) "persist duration" value can be configured as two properties of the J2EE Service
1."SAP XI Adapter: XI" (value is in milliseconds): "xiadapter.outbound.persistDuration.default"
2. "xiadapter.inbound.persistDuration.default"
Regards,
Fabio Boni
Edited by: Fabio Boni on Feb 9, 2011 11:01 AM

Similar Messages

  • How can I leave a group in iMessage. I delete the group, but whenever a member sends a message, I get all the messages again

    How can I leave a group in iMessage?
    I delete the group in iMessage because I don't want to receive any more messages.
    Nevertheless, whenever a member sends a message, I get all the messages again. I have only deleted the previos messages.
    In the users manual, they only tell how how to create a group, but not how to leave it.
    Thank you.

    Sorry you can't.

  • Retrieving messages deleted by turning off imessage

    Is there anyway to retrieve text messages deleted by turn imessage off then back on?
    I turn off imeesage on my iphone 5 and sent a text via standard messaging, then turned imessage back on, in doing this it auto deleted messages from earlier this month.  Is it possible to get these back?
    Thanks

    WelcoMatt wrote:
    I need to know how to turn off imessage remotely as now that I have switched to android I cannot receive text messages because my account is still trying to receive them as imessages. How do I do this?
    By contacting Apple support -> http://www.apple.com/support/contact/

  • Is there a way to hide an iMessage conversation without deleting it?

    Is there a way to hide an iMessage conversation without deleting it?
    I recently went through a breakup and would like to not see my ex's face and messages every time I pull iMessage up, but I also don't want to delete them. I have the most up to date versions of iMessage on my Macbook Pro and iPhone 5C as of this post (10-5-14)

    Hi,
    iMessages account on the Mac (in the Messages app) stores the iMessages in a Chat.db item
    IF you dismiss a conversation from view  (mouse over it and use the x that appears) the chat.db will supply the "History" if and when you contact that person again.
    However it is worthwhile also creating a back up of some sort.
    As well as Time Machine it can also help to highlight the whole Chat (work from the most recent end to the "top" of the conversation to highlight it all.
    You can then Print and Save as PDF.
    You can back up your iPhone in iTunes.
    These can be used to Restore the iPhone back to that time.  (you do lose all new things added since the Backup was made.)
    There are various tools out there to extract info from iTunes Backups of iOS devices, which might help.
    Of course the Messages app on the Mac also has a Settings for Saving on close.  (it will Save if you dismiss the chat/Conversation and when the app is closed/Quit)
    Over and extended conversation or chat that lasts days or months each Session on the computer is Saved.
    Again you can dismiss the chat/conversation form view as you have saved versions (in parts) of the conversation.
    (You cannot Save a chat or conversation in Retrospect.)
    8:42 pm      Sunday; October 5, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How can I recover a iMessage that was deleted and if not is there a way apple can send me email of all my iMessages in past month

    How can I recover a iMessage that was deleted and if not is there a way apple can send me email of all my iMessages in past month

    Hi Toniann,
    If you have a recent iCloud backup that was done when that message was on the devcie, you can restore from that backup.
    No, Apple does not keep your messages, no do they have access to them. That would be a serious invasion of privacy, don't you think?
    GB

  • TS4268 HELP!!! Sometimes when I use iMessage, my messaging freezes

    HELP!!! Sometimes when I use iMessage, my messaging freezes.  I can't send texts or receive them.  Went into my local Phones 4 U store and he changed some settings... no help.  Any ideas? Thanks

    I he'd similar problem. iPhone 5s iSO 702.
    It was very hard to scroll trough messages. It was hard to klick on a picture and get it open.
    What worked for me was to delete a movie that I have send through iMessage. Once I ménage to delete it everything when're back to normal. I hope this helps you. 

  • Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages  it only show imessage and message count )HELP)

    At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

  • I cannot open any of my Hotmail e-mail messages, delete them, look at other ones, nothing. All I can do is sign in and that is it.

    I cannot open any of my Hotmail e-mail messages, delete them, look at other old ones, nothing. All I can do is sign in and that is it. I have tried deleting cookies, clearing the cache space, rebooting the computer, rebooting my internet connection, refreshing the page several times. Here is the thing. I can get on the page and read my mail, etc. like normal if i use Internet Explorer, but I prefer Firefox. The problem is Firefox and I rely on my e-mail for job purposes. I hope someone can help me!!!

    Nevermind. I finally found a third party answer and will post it for anyone else with my problem.
    >Go to the iTunes store.
    >Halfway down the page, right hand side, says account
    >Under account it says purchaced, select that
    >Wa-la

  • Error Message "Delete price or set "Invoice Expected Indicator" in PO.

    Hi Gurus,
    We are in extended classic scenario with version 5.0.
    We are getting error message "Delete price or set "Invoice Expected Indicator" when we are releasing the PO from Release PO option.
    We are getting this error message in below situation:
    We created shopping carts without vendor then after approval PO gets created in "Held status". When we edit the PO & add vendor then system gives error message "Delete price or set "Invoice Expected Indicator" (Line 1).
    In this case the invoice expected indicator is not sets when we add vendor in the PO but if we create Shopping cart with vendor & when PO create din that case the invoice expected indicator is automatialy comes.
    Can any one please help me to resolve this issue.
    Thanks & Regards,
    Manish
    Edited by: Manish Mamidwar on Jul 30, 2010 5:40 PM

    Hi All,
    I have the same problem, Delete price or set "Invoice Expected Indicator" in PO
    I have an Item Position of the PO that is Limit of Liability and for this position type I will not make invoice, then I would like remove the flag of invoice execution, but a recived your same message, can you tell me how did you resolve this problem?
    Kind regards
    Valentina Mari
    Edited by: Fuffo Fuffi on Nov 10, 2010 12:51 PM

  • On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezinginsending

    On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends

    See:
    iOS: Troubleshooting Messages
    However, I suspect it is just a tempery network problem beyond your control

  • IMessage voice message is not active in iOS8

    I am using an iPhone 6 and have read the previous question entitled "iMessage voice message is not active in iOS8"  and applied the suggestions but it has not corrected my problem.  I made sure iMessage was turned on in my settings/Messages.  I made sure my called phone number was also an iPhone 6 with the same iMessage turned on in similar fashion.  Both phones are identified as iPhones in contacts with the phone numbers  but I don't believe that has anything to do with the issue cause it sometimes works fine with phones defined as mobile.  I am current on IOS8.02.

    Thanks for your information. That really gives me some hints to figure out what's going on of my iMessage.
    OK, here is my trial test after all the replied suggestions above.
    (1) It seems the voice/video memo function will be ONLY enabled automatically when sender and receiver are all iPhone(iMessage app) users.
    (2) In my case, if I choose a receiver who is a iPhone user too, then the voice/video memo function button is working nicely.
    (3) The receiver doesn't need to run iOS 8. I have tried iOS 6 iOS 7 friends, there is no problems at all.
    (4) In conclusion, you have to find another iPhone user to experience new function just like the same requirement of Facetime.
    Problem solved , I hope my question could help other confused user as well.

  • Multiple message deletion functionality disappears

    My iPhones 5S with iOS 8.1 loses multiple message deletion functionality. I tap a message in communication thread, chose more options, mark messages to be deleted and push waste bin. When used a few times the waste bin is replaced with camera options and deleting multiple messages is not possible; see screenshot. In order to re-establish the functionality, I have to close the message app down and restart it. Are there any solutions or work around to this?

    Hi Kare Gronholt,
    If you are having issues with your iPhone's ability to delete multiple messages, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    OS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • XI Message Deleting

    I do not have any archiving set up, but we do seem to have the default message delete job running on a daily basis (based on viewing log at http:/host:port/mdt/MSArch).  But what is actually getting deleted?
    On our dev system, I can see successful and failed messages in SXMB_MONI going back nearly 2 years (when we started messing with XI).  Based on the SAP library docs, I would have expected any successful messages to be deleted by the default delete program.
    Is there something else I need to do to get the "default delete job" to work properly?
    Thanks

    Keith,
    For step by step procedure of how to archieve and delete messages in XI go through the urls:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
    Delete Messages SXMB_MONI
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
    Too many questions on Archive/Delete messages.
    For some further info:
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
    Here is a good discussion-
    Too many questions on Archive/Delete messages.
    ---Satish

  • Undo Message Delete command is sometimes present, sometimes not

    I've noticed that sometimes the Undo Message Delete command is present after I delete a message
    but other times it isn't - all that's there is Undo which is greyed out. Does anyone know the conditions
    under which the Undo Message Delete command appears? I haven't found any consistent pattern.
    I know the message can be manually moved back from the Trash but I've found that occasionally I've inadvertently
    deleted a message without knowing which message it is which makes it rather hard to find in the Trash.

    Open your firewall program. First check the settings. Make sure that the
    program is set to tell you if a new program wants access to the web. Then
    go to the list of programs the firewall has. Make sure that all the programs
    you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
    firewall may not allow access.
    ====================================
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Content of message deleted to save memory

    Hi experts,
    When I click on "details" tab in message Monitoring. It gives message "Content of message deleted to save memory" and does not show the Payload of the messages too.
    Please let me know wht does this means"Content of message deleted to save memory"??
    thanks in advance

    Hi!
    Abishek's tip is well for the Java part (RWB/Adapter Engine message persisting - you will have to set a parameter there).
    In SXMB_MONI you will see  ...
    1. only the ABAP part of the messages (not message content in Adapter Engine - therefore you need RWB)
    2. synch messages only if you have configured for persisting synchronous messages in ABAP stack.
    You can do that in SXMB_ADM -> Configure Integration Engine -> Category RUNTIME -> LOGGING and/or LOGGING_SYNC -> set to 1 (0 per Default).
    Regards,
    Volker

Maybe you are looking for

  • Check number skipped

    Hi Everyone, When we run F110 payment program. The system will print all the checks included in the  payment run but skipping a number and marking that number as void.i.e: If system prints check no.300156, it skips the 300157 number and marking this

  • XI Post Installation - SLD Connection

    Hi, I'm following the XI 3.0 post-installation guide. In the step "Maintaining SLD Connection Parameters" I call transaction SLDAPICUST and try to insert a row as described in the guide. The problem occurs in the password column which is not editable

  • Table decimal value display is incorrect for a particular user

    Hi, In my VC table value display is showing like .00. Before decimal point values are not coming. I have put disply as 2 decimal. It is hapanning for a particular user.  Other users are getting right value. Even we logged on different machine also. p

  • CTRL+SHIFT+F3

    The CTRLSHIFTF3 is relative common key for Eclipse, I was woundeing item like this for Webdynpro so I will know the method has been used where in the program. Thanks

  • Float to int

    Hi guys, I have the following float variable: public float cameraX;after performing the following assignment : cameraX=cameraPosition.x;I have to convert cameraX into an integer, or trunk the decimal part of this float number; which methods in which