IMessage is activated but not working

hi, i have always had issues with imessage back when i first got my iphone in 2010.  It had always been a simple error like i needed internet to activate or i needed to reset all my settings but then i upgraded to ios 7 and things got progressivly worse. My iMessage is activated and so is my FaceTime. I only have it set up to have my number enabled becuase when i enable sending to my appleID it will break. other people that have an iphone with iMessage enabled see that i have imessage and their texts to me automatically convert to imessages. however, i cant recieve these imessages or send them to anyone who has an iphone with imessage enabled. i have tried factory reseting it and reseting the network settings and hard reseting it but nothing works. Please help.

iOS: Using Messages
iOS: Troubleshooting Messages

Similar Messages

  • IMessage logged in but not working

    I recently had the logic board replaced on my early-2011 15" MacBook Pro due to video issues. While the machine was with Apple, I migrated my user to my wife's Mac and set up iCloud.
    I got my own computer back and had to re-login to iCloud (possibly due to the hardware change on my computer).
    I appear to have logged in successfully, but iMessage no longer works at all on my MacBook Pro. It shows iMessage being active, but every time that I try to send a message to an iMessage user, the send fails and I see the message, "XXXXX isn't registered with iMessage."
    Users who I KNOW are on iMessage don't show as logged in, as in the screen cap below.
    I've tried deleting any iChat/Message prefs in my Library --> Preferences. I've disabled and re-enabled iCloud on my Mac. I've disabled and re-enabled iMessage on the computer. I've also completely signed out of iCloud and iMessage respectively and set them up again from scratch - All to no avail.
    Is there a fix for this? Is this a 10.10.3 bug?
    Help!

    Here it is:
    2015-04-17 1:27:16.673 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    2015-04-17 1:27:16.683 PM com.apple.SecurityServer[79]: Session 100039 created
    2015-04-17 1:27:17.652 PM com.apple.SecurityServer[79]: Killing auth hosts
    2015-04-17 1:27:17.652 PM com.apple.SecurityServer[79]: Session 100037 destroyed
    2015-04-17 1:27:17.653 PM logind[95]: -[SessionManager getClient:withRole:inAuditSession:]:241: ERROR: No session dictionary for audit session 100039
    2015-04-17 1:27:17.653 PM logind[95]: _SMGetSessionAgent:73: ERROR: __SMGetClientForAuditSessionAgent failed 2
    2015-04-17 1:27:17.653 PM IMRemoteURLConnectionAgent[1682]: SACShieldWindowShowing:925: ERROR: NULL response
    2015-04-17 1:27:17.655 PM identityservicesd[392]: [Warning] Warning, missing mailto:[email protected] in (null)
    2015-04-17 1:27:20.880 PM vpnd[1684]: Server 'com.apple.ppp.l2tp' starting...
    2015-04-17 1:27:20.882 PM vpnd[1684]: Ignoring invalid ip address range
    2015-04-17 1:27:20.882 PM vpnd[1684]: No valid client IP addresses
    2015-04-17 1:27:20.882 PM vpnd[1684]: Error while reading PPP preferences
    2015-04-17 1:27:20.882 PM vpnd[1684]: Error processing prefs file
    2015-04-17 1:27:20.882 PM com.apple.xpc.launchd[1]: (com.cutedgesystems.vpn) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    2015-04-17 1:27:22.212 PM identityservicesd[392]: [Warning] Warning, missing tel:+1234567890 in (null)
    2015-04-17 1:27:22.212 PM identityservicesd[392]: [Warning] Warning, missing mailto:[email protected] in (null)
    2015-04-17 1:27:23.334 PM com.apple.xpc.launchd[1]: (com.apple.imdmessageservices.IMDMessageServicesAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    2015-04-17 1:27:23.334 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    2015-04-17 1:27:30.894 PM vpnd[1686]: Server 'com.apple.ppp.l2tp' starting...
    2015-04-17 1:27:30.897 PM vpnd[1686]: Ignoring invalid ip address range
    2015-04-17 1:27:30.897 PM vpnd[1686]: No valid client IP addresses
    2015-04-17 1:27:30.897 PM vpnd[1686]: Error while reading PPP preferences
    2015-04-17 1:27:30.897 PM vpnd[1686]: Error processing prefs file
    2015-04-17 1:27:30.898 PM com.apple.xpc.launchd[1]: (com.cutedgesystems.vpn) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

  • IMessage is on but not working

    I recently lost my iphone 5 so I had to switch to an old 3G in the meantime. Basically, the imessage claims its on with both my current number and email. However, when I send messages to people with iphones and ios 5 or higher it is still sending as text (green).I've researched the issue and cannot find any explanations.
    Also, I am not receiving imessages either. I tried on my friends phone to send to my new number and it went through as imessage (blue delivered) yet it never came through. This leads me to believe that the imessage is indeed on (otherwise it would have went through as text on his phone). I have countless friends with imessage and none of the messages come up blue when trying to send.
    Im not sure what the issue could be. It would be one thing if the imessage wasnt activated on my phone, but it is. I've tried resetting the network settings, turn on/off imessage, etc. to no avail. If anyone has any idea what the issue could be, it would be greatly appreciated.
    Thanks!

    On your iPhone go to Settings > Messages > Send & Receive.
    Select your Apple ID at the top and at the menu window that appears, select Sign Out.
    Follow this by signing back in with your Apple ID at the same location.

  • Ethernet active but not working - Airport works perfect

    Dear all,
    I have a very strange problem with my iMac.
    One hour ago internet was working perfectly while being connected via ethernet cable.
    Now it does not anymore.
    General Settings - Network
    The led of the ethernet is green when IPv4 configured manually - but internet does NOT work!!!
    The led of the ethernet is green when IPv4 configured DHCP - and internet works!!!
    In both settings then only thing that changes is the IP address, i.e.:
    Manually I have to configure it as 192.168.1.21
    With DHCP the IP is 192.168.1.160
    I have read lots of discussions and tried the following:
    Tested cable with LAN tester - fine
    Tested switch / router / other computers connectivity via ethernet - fine
    Tested connectivity on my computer using Airport and it works fine
    Reset the SMC
    Set service order Ethernet (top), then Wi-Fi
    Launched terminal command netstat with following result
    Name  Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs  Coll
    en0   1500  <Link#4>    34:15:9e:36:b6:16     1040     0     7489     0     0
    en0   1500  brs-server. fe80:4::3615:9eff     1040     -     7489     -     -
    en0   1500  192.168.1     192.168.1.21        1040     -     7489     -     -
    Please HELP!!!

    Yes I can and I've done it.
    But it is when I do that, Internet stops working.
    I checked IP, subnet, gateway, DNS... all is correct but internet does not work, although the "led" into ethernet connection of the network settings is green!

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

    Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Pick activity is not working properly while creating two or more file adapt

    Hi,
    pick activity is not working properly while creating two or more file adapter for bpel process.
    bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
    can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
    Thanks
    sagar

    Does anybody tried this?
    Thanks
    sagar

  • Hierarchical Tree: When-Tree-Node-Activated is not working

    I'm working Forms 10G rel.2.1 and also using application server 10G 2.
    my problem is in Hierarchical Tree [When-Tree-Node-Activated] is not working in Enter this is working in Enter+Tab
    I want to this trigger is working in only Enter.
    I'm waiting quick response

    node_value is only item which have transfer the form or report name
    Trigger Name : WHEN-TREE-NODE-ACTIVATED
    Declare      
         htree                Item ;
    Begin
         --clear_values;
    --           htree := Find_Item('tree.htree');
    -- Find the value of the node clicked on.
    :node_value := ftree.Get_Tree_Node_Property(htree, :SYSTEM.trigger_NODE, Ftree.NODE_VALUE);
    ----Above node value transfer the procedure and call the form with node_value(Form Name)
         Execute_CMD_PROC;
    Exception
         When Others Then Null;
    End ;
    when i enter then no value but when i enter+tab then show the form

  • Mysites Activity feed not working

    Hi,
    I have restored Mysite Content database.After restoring it, Profile pictures coming correctly but activity feed and trending tags not working(coming blank).
    After restore db i did following:
    IIS reset
    Server reboot
    Mysite setup settings(activity feed enabled)
    Alernate access mapping.
    Still activity feed not working.Please suggest.

    Hello
    Have you checked the timer job ?
    http://technet.microsoft.com/en-us/library/hh344225(v=office.15).aspx
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • HT2188 iPad 1 requested activation after being low on power. Activation does not work.

    Hi
    My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes.  this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
    I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
    Thanks

    I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
    I plugged in the USB monitor and boom - I could log in.
    Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
    So the issue is the detection / setup of monitors in/out of the dock.
    I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

  • I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    Hello there, Bromers87.
    It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    and
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

    My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

    Tony,
    My first thought is to make sure that you are actually logged in using the same AppleID on both devices.  Many folks share one AppleID for their family's iTunes Store account yet use another personal AppleID to log into iMessage settings and iCloud settings.
    To confirm that the AppleID and password you are using is correct I would suggest visiting http://icloud.com and attempting to login there.  If you get in, then you know for sure that that is a valid AppleID/password pair.
    If that still doesn't reveal the issue then I would try opening Notes app on both iPhones, and then typing your password out where it can be seen clearly.  This may reveal if your are typing it differently due to iOS 8 changes in the shift key indicator, or possibly that a screen protector or case is causing your touches to not register the same on both devices.
    I hope these suggestions help.

  • I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    Maybe here. You are not really provided much information like what happens when you try.
    iMessage won't work after iOS 6 upgrade: Apple Support Communities

  • Import is not available all other actions are active but not import help?

    Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    *You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    *To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

Maybe you are looking for