Imessage login error with valid AppleID

I have an iPad 2 with 5.1.1 IOS. I am able to successfully log into the Apps store with my AppleID. I am able to log into the appleid.apple.com site with my Apple ID.
However, when I try to log into either iMessage or FaceTime, it complains of an invalid account or password.
I have tested the account on a Mac running Mountain Lion with the same result - iTunes login OK, iMessage login fails.
If I try to create a new iMessage account with the same email information it wont let me because it already exists, so the account is valid.
This would appear to be an issue with the iMessage account, but I can find no way of verifying or updating this.
Any suggestions??

Had the same problem and found note '1588487 - Active Directory authentication failed with InfoDesignTool'
Problem solved for me.

Similar Messages

Login error with BOXI 3.1

I frequently get a login error with BO XI 3.1 (with fix patched 1.3 and SAP interface installed on Linux machine).
ERROR:
Account information not recognized: The property SI_GUID of info object with id number 1876 is not unique. Table = 'CMS_InfoObjects6'. Column = 'SI_GUID'.
(authentication type: enterprise)
Error comes after first logging out with User1 and then trying to login again immediately with User2 (with IE6).
Thanks, Timo

Hello again,
Just to answer your questions:
- Yes, all systems are in the same domain
- I have configured BOE for SAP SSO. Users and roles have been imported.
- The SAP Portal is sending the ticket.
We've been able to reproduce the error over different client machines, and a workaround involves closing the browser window (with the error) that gets launched from SAP Portal on the first attempt and then clicking through to BO from the SAP Portal again. It works fine after that, but I'm afraid that some users might find this annoying/alarming
Thanks,
Myla

Can not create icloud account with valid Appleid

Hi, I´m trying to create an icloud account with the Appleid I use with itunes, but I get an error message saying that the Appleid is valid but it doesn´t corrrespond to an icloud account (this is in the icloud control panel). I would appreciate assistance.

You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID. You can only sign into an existing iCloud account on a PC. You first have to create your iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Login error with report viewer when opening Crystal report with subreport

Hi
I have a problem with a login error (database vendor code 18456) when I try to open a crystal report to view it.
The report uses data from an external payroll database but I'm running it via our Accounts system (it's a convenient front end for users to run the report from). This works fine for another report that doesn't have any subreports. However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. It doesn't seem to be passing the login details for the payroll database down to the subreport.
I'm using Crystal Reports version 11.0.0.1282. The Accounts system is Technology One. Tech One have provided a report template that has several formulas designed to allow Tech One to play nicely with Crystal. One of these formulas allows me to enter the nickname of the external database that the report needs to use. The external database's connection details are fully specified in the Tech One configuration section (server console). So in this case the report says use database U1 & the server console identifies U1 as being the payroll database, specifies the connection path & has the username & password required to logon to the payroll database/server.
The report is running ok & retrieving data, but for some reason the viewer is erroring. If anyone has any ideas for how I can get the login details used to run the main report to flow through to the subreport it would be much appreciated.
Thanks
Sue

I understand your frustration. We can do a few things. But really, it should be Technology One contacting us. To use an analogy (which you are free to share with Technology One). They built a car and sealed the hood. You bought the car, but he engine does not quite run as it should. You bring the car to the mechanic and all he can do is look at the car as he can not even open the hood.
In any case, here is what I would do if I could open the hood (e.g.; if I was dealing with Technology One):
1) Look up database vendor code 18456. This is simply the error our print engine is receiving from the database client and it simply passes it through relatively unhandled. This you should be able to do your self or ask Technology One to tell you what that means.
2) Break out the subreport and see if it runs on it's own in the application (if this is a permissions issue - which I doubt - it should come up here too). Unfortunately, this is for Technology One to do...
3) Run the report (with the subreport) in the CR designer. Does it work there? If this is a win app and it works, we again eliminated permission issues. And we also confirmed that the report is good. Again, Technology One should do this for you.
BTW.; CR 11.0 is out of support - not sure if you or Technology One are aware of this...
4) Can the developer duplicate the issue on his development computer?
Now, there are couple of instances where you say something like; "the report works and gets data, but the viewer errors out":
+The report is running ok & retrieving data, but for some reason the viewer is erroring.
However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. +
How do you know the report is retrieving data? From the error I would say the report never connects, thus the error / request for a logon...
So, the short of all of this is; get Technology One to contact us. They can do it over the forums or obtain a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100
Now, here is a warning. As CR 11.0 is out of support Technology One will have to upgrade to CR 11.5, before that can create a phone case, which for them and you brings up another bunch of issues...
If you do not get any joy from the support person at you are talking to at Technology One, get him to escalate the issue. They are the ones that should be talking to us...
Ludek

Problem logging into Apple Discussions with valid AppleID

I have been a used of the Apple Discussions Board for some time. Recently, a problem developed. When I tried to log in using my AppleID, I started receiving the message that a needed to create a new Apple Discusssions Board account.
First, I did not understand why I needed to.
Second, when I tried to go ahead and create the new account. It says it has problems with my AppleID.
I noticed that after I login with that AppleID, it does not appear in the appropriate space on the Create User form. When I log in using another AppleID, I can create a new user account without a problem but my preferred Alias is already taken (I suspect by my old account).
Is there any way to get my old account and points back?
Thanks,
Mitch Strickland

Hi Holger,
Thanks for your reply. It unfortunately hasn't solved my problem yet.
> can you check the log files (esp. the portal.log & usermanagement.log
No entries are made in these logfiles during login. What I did find though is that the following entry is made in /usr/sap/<PORTAL_SID>/j2ee/j2ee_<00>/cluster/server//log/system.log:
#1.5#C0000A021E020008000000000065B7380003E6C9A07C61C8#1098178585453#/System/Security/Audit#irj#com.sap.security.logToFile#System#0#####Client_Thread_39##0#0#Warning#1#com.sap.security#Plain###quanjer | LOGIN.OK | USERACCOUNT = UACC.PRIVATE_DATASOURCE.un:quanjer | | IP Address=[10.2.50.162]#
This seems to indicate that the actual login attempt was succesful even though I'm still stuck on the logon screen.
> Or you could try (just for a test) to include the nebula.lt.nl with the correct IP from your portal
> server to your HOSTS file in (winnt\system32\drivers\etc)
I tried that already and it didn't work. I just tried it again just to make sure and it still doesn't work
> You can change that in the sapum.properties by changing (or adding) the value of
> ume.logon.security.relax_domain.level=2
I've made the entry in the sapum.properties and restarted the portal but to no avail, it still doesn't work.
It's gotten even weirder: if I use the IP address of the portal in the URL (http://10.2.30.2:5000/irj) then I get the same behaviour as when I use the fully qualified domain name....I'm stuck on the logon screen again. It seems like the only URL that works correctly is http://nebula:5000/irj.
Cheers, Arnoud

Login error with correct u/p using Oracle Application Server / BPEL

Hello,
We are using Oracle 11g and BPEL 10.1.3.4. We had everything working fine until earlier this week. We were receiving an exception when accessing the database from our BPEL process.
Unable to establish connection to "iCareConnectionPool". Error message: Exception occurred testing connection. Exception: java.sql.SQLException: ORA-01017: invalid username/password; logon denied.
I went into the Application Server control and tested the data source and connection pool and they both failed with the login error. The userid and password being submitted is correct. I checked the data-source.xml file and the id/password looked good. Here are the steps I performed.
On BPEL server:
1)     Deleted connection pool iCareConnectionPool, data source, iCareDataSource, and removed /eis/db/iCareDataSource from the DBAdapter.
2)     Created new connection pool – iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
3)     The connection pool test was successful. Clicked finish to create connection pool
4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
5)     Modified connection pool to use IDS2 and it worked.
6)     Modified connection pool to IDS and it failed.
7)     Modified connection pool to jimc and it worked.
On Database:
1)     Created new schema/user ICAREIDS
2)     Connected using SQL Developer and I could connect
On BPEL Server:
1)     Deleted connection pool
2)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
3)     The connection pool test was successful. Clicked finish to create connection pool
4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
5)     Modified connection pool to use IDS2 and it worked.
6)     Created new connection pool TestPool – same results
7)     Tried jdbc:oracle:thin:@//<host>:1521/ORCL - same results
On my local system BPEL server:
1)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
2)     The connection pool test was successful. Clicked finish to create connection pool
3)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
4)     Modified connection pool to use IDS2 and it worked.
5)     Modified connection pool to use ICAREIDS and it failed.
Since it failed on two different BPEL server's, I am wondering if it is something with the database. I can connect using existing schema's but not IDS or any new schemas. However, I can connect to any schema using any other tool like SQL Developer.
Can anyone provide an insight as to what could be happening here.
Thanks,
Jim

I found the problem and wanted to pass on the solution in case any one else runs into this problem.
With Oracle Database 11g the passwords are now case sensitive. Because the BPEL server is using 10g drivers the login fails if you have capital letters in your password.

OEM 11g login error with sys user.

I have two database in my local host. one is created with dbca and another is manually created.
i am not able to login ONLY with "sys" user in OEM 11g but i can login in sqlplus with the same user(only in database created manually ).

yes m giving correct pwd as i mentioned i am bale to login with the same in sqlplus . below is the log details :
C:\Users\jatrived>emca -deconfig dbcontrol db
STARTED EMCA at Apr 25, 2013 12:33:20 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:33:29 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_33_19.log.
Apr 25, 2013 12:33:30 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:34:12 PM
C:\Users\jatrived>emca -config dbcontrol db
STARTED EMCA at Apr 25, 2013 12:34:29 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Listener port number: 1521
Listener ORACLE_HOME [ D:\oracle\product\11.2.0\dbhome_1 ]:
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Local hostname ................ ***********.corp.****.com
Listener ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ cgdb
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:35:12 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_34_29.log.
Apr 25, 2013 12:35:16 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Apr 25, 2013 12:36:26 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library is already configured.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: EM_SWLIB_STAGE_LOC (value) will be ignored.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Apr 25, 2013 12:37:36 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Apr 25, 2013 12:37:37 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: Database Control started successfully
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: >>>>>>>>>>> The Database Control URL is https://***********.corp.****.com:5500/em <<<<<<<<<<<
Apr 25, 2013 12:38:25 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING:
************************ WARNING ************************
Management Repository has been placed in secure mode wherein Enterprise Manager data will be encrypted. The encryption key has been pl
aced in the file: D:/oracle/product/11.2.0/dbhome_1/***********.corp.****.com_cgdb/sysman/config/emkey.ora. Please ensure this f
ile is backed up as the encrypted data will become unusable if this file is lost.
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:38:25 PM
portlist details :
here now two db having same port , how to remove or change ?
D:\oracle\product\11.2.0\dbhome_1\install>more portlist.ini
Enterprise Manager Console HTTP Port (ORA10) = 5500
Enterprise Manager Agent Port (ORA10) = 1830
Enterprise Manager Console HTTP Port (jai) = 1158
Enterprise Manager Agent Port (jai) = 3938
Enterprise Manager Console HTTP Port (test) = 1158
Enterprise Manager Agent Port (test) = 1830
Enterprise Manager Console HTTP Port (cgdb) = 5500
Enterprise Manager Agent Port (cgdb) = 1831

Fix for iMessage login error on mac using appleID

hi just fixed my imessage for mac
i know alot of people have this problem and thought this would help. if your having trouble siging in with your apple id or it looks like its taking ages and fails then go:
go to network preferences
advanced
dns
on the left with the servers add
8.8.8.8
it worked for me
i closed it then restarted then tried sending a messsage to my iphone using my number and it worked
try it

HI,
DNS server are the servers dotted about the internet that convert your Browser sending requests for Apple.com to an IP number.
DNS stands for Domain Name System
Your ISP normally has at least two DNS servers and these tend to show in the router or modem automatically.
In some cases they will show up as greyed out number in System Preferences > Network > Advanced Button > DNS tab as well (depending on how the routing device gets them and other factors)
You can manually add these if required so that they are in Dark text.
What happens is that some DNS servers are better at resolving names than others.
To certain extent it depends where your local (ISP) DNS servers are in relation to the place they are looking for.
iChat uses DNS to make Video Chats and Audio Only chats more than it does for text chats.
It is also involved in finding the Apple Server that handles the fact that the Apple ID is going to be linked to iMessages activity. (it seems that some DNS Servers can't find this particular Apple Server)
9:25 PM Sunday; May 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT204053 IMessage Login Error

I'm trying to activate iMessage with the Apple ID I've owned for years, but keep getting this response "the user name of password for "[email protected]" was incorrect. Try again. I even tried creating a new 2nd Apple ID with password and still get the same message as above.
I just used my standard Apple ID to log in to the support communities so I know it works.
Any ideas?
Tim

Few:
1.Server glitch - try again in couple hours
2.Mistyped password or user name - make sure you type in full e-mail for the apple id, make sure you capitalize where necessary, verify you can log into your account at appleid.apple.com.
3. Phone glitch - hard reset phone.
4. Network problem - verify that you are connected to Internet and can login to secure website.

Login error with windows AD authentication in IDT (Infomation Desugn Tool)

HI,
In IDT (Information Design Tool) I was not able to publish objetcs ( OLAP connections, Business View layer etc) to corresponding repository using windows AD authentication, but with enterprise I was able to do so.
With the same AD authentications I was able to open universe design tool, BI launch pad .
Please advise how to correct
Error----
Error:
Failed to log on host com.crystaldecisions.sdk.exception.SDKException$SecurityError: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
cause:java.lang.SecurityException: Unable to locate a login configuration
detail:Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006) Unable to locate a login configuration
Cause of Error:
Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
Error----
Thanks in advance
Regards
Krishna

Had the same problem and found note '1588487 - Active Directory authentication failed with InfoDesignTool'
Problem solved for me.

SCOM Agent Causing Login errors with LSAsrv

Bit of background:
We have numerous servers within a separated secure environment which are getting flagged as having failed login attempts every 4 hours. The exact same issue is presented in our normal estate.
Initially it presents itself as an error in the event log with EventID 6037 and the following information (this is what is flagging in our security system).
The program svchost.exe, with the assigned process ID 1876, could not authenticate locally by using the target name HOST/.. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name.
This actually turns out to be controlling RemoteRegistry.
The following link is a work around for this, but preferably, I don't want to disable loop back checking or strict name checking.
https://social.technet.microsoft.com/Forums/systemcenter/en-US/05cedf19-cd02-4c26-9651-4b5d5f46d58b/event-6037-lsasrv?forum=operationsmanagergeneral
(For some reason I now can't find the actual MS KB describing the work-around)
The other alternative is to then amend a registry key for BackConnectionHostNames [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0] (Sorry can't find the KB where I saw the work around for this now). However, given the number of servers affected,
I'm reluctant to go down this route.
I've disabled the SCOM agent and this is definitely the culprit; so the final option is to work out which ManagementPack has been incorrectly setup and then either override it or amend it for the servers.
I've run ETL tracing on one of the servers and get the following output (I believe the two relevant lines are the [13080] [8644] lines, and the timings coincide exactly with the LSASrv.exe eventIDs.
[1] [13080] [8644] [03/09/2015-15:10:06.978] [HealthServiceCommon] [] [Warning] [] [CFileUtility::_CheckAndCreateDirectory] [FileUtility_cpp202]GetFileAttributesEx on path "C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 59\2438\" failed with code 2(ERROR_FILE_NOT_FOUND).
[0] [13080] [8644] [03/09/2015-15:10:07.000] [HealthServiceCommon] [] [Warning] [] [CFileUtility::_CheckAndCreateDirectory] [FileUtility_cpp202]GetFileAttributesEx on path "C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 59\2434\" failed with code 2(ERROR_FILE_NOT_FOUND).
[1] [13080] [8644] [03/09/2015-15:10:07.012] [HealthServiceCommon] [] [Warning] [] [CFileUtility::_CheckAndCreateDirectory] [FileUtility_cpp202]GetFileAttributesEx on path "C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 59\2430\" failed with code 2(ERROR_FILE_NOT_FOUND).
[1] [13080] [8644] [03/09/2015-15:10:07.017] [ModulesLibrary] [] [Error] [] [MOMXmlSupport::LoadElement] [MOMXmlSupport_cpp823]`VariantChangeTypeEx(&bstrVar, &bstrVar, LOCALE_INVARIANT, 0, VT_R8)` failed, returning ERROR: {hr= 0x80020005(DISP_E_TYPEMISMATCH)}
[0] [13080] [12132] [03/09/2015-15:10:07.038] [ModulesPerformance] [] [Error] [] [McPerformance::Snapshot::getNextObject] [McPerfSnapshot_cpp2115]makePerfPtr returned NULL
[2] [13080] [10612] [03/09/2015-15:10:07.134] [ModulesLibrary] [] [Error] [] [MOMXmlSupport::LoadElement] [MOMXmlSupport_cpp823]`VariantChangeTypeEx(&bstrVar, &bstrVar, LOCALE_INVARIANT, 0, VT_R8)` failed, returning ERROR: {hr= 0x80020005(DISP_E_TYPEMISMATCH)}
[2] [13080] [9540] [03/09/2015-15:10:07.138] [ModulesLibrary] [] [Error] [] [MOMXmlSupport::LoadElement] [MOMXmlSupport_cpp823]`VariantChangeTypeEx(&bstrVar, &bstrVar, LOCALE_INVARIANT, 0, VT_R8)` failed, returning ERROR: {hr= 0x80020005(DISP_E_TYPEMISMATCH)}
[0] [13080] [8644] [03/09/2015-15:10:07.451] [ModulesCommon] [] [Warning] [] [CModuleUtility::IsLocalMachine] [ModuleUtility_cpp135]Unable to find the address for the specified machine (.), assuming remote monitoring, error = 11002(WSATRY_AGAIN)
[0] [13080] [12628] [03/09/2015-15:10:07.460] [ModulesLibrary] [] [Error] [] [MOMXmlSupport::LoadElement] [MOMXmlSupport_cpp823]`VariantChangeTypeEx(&bstrVar, &bstrVar, LOCALE_INVARIANT, 0, VT_R8)` failed, returning ERROR: {hr= 0x80020005(DISP_E_TYPEMISMATCH)}
[0] [13080] [8644] [03/09/2015-15:10:07.769] [ModulesCommon] [] [Warning] [] [CModuleUtility::IsLocalMachine] [ModuleUtility_cpp135]Unable to find the address for the specified machine (.), assuming remote monitoring, error = 11002(WSATRY_AGAIN)
[0] [13080] [7060] [03/09/2015-15:10:10.097] [ModulesExpressionEvaluator] [] [Error] [] [RegExExpression::Evaluate] [MOMExprEvaluator_cpp2787]`EXPR: m_pValue->Evaluate(pitfEvaluateValue, pitfReportError, pitfProcessTrace, &spValue) FAILED` {setting hr= HRESULT=80FF0059}
So essentially my question is now that I've narrowed it down to it being a management pack of SCOM, whats the best process to work out which particular management pack is causing this?
Is there a way to get a list of all management packs that apply to a computer object? If I can get this, I can then work out which ones are on a 4 hour timer to narrow the list down and then systematically create overrides to work out which one it is.
Kind Regards,
Kevin

Hi,
If there is something wrong with the agent, we should get alerts in SCOM console for this agent. Please also check is there any errors or warnings in operation manager event log on this agent.
And here are two links about geting monitors, rules runnin on an agent, hope it can be helpful for you
What Monitors, Rules and Discoveries are running on an OpsMgr Agent?
http://blogs.technet.com/b/stefan_stranger/archive/2010/11/30/what-monitors-rules-and-discoveries-are-running-on-an-opsmgr-agent.aspx
How to View All Rules and Monitors Running on an Agent-Managed Computer
https://technet.microsoft.com/en-us/library/hh212748.aspx?f=255&MSPPError=-2147217396
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not able to pass portal login page with valid credentials using WebDispatch

Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen

' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

Channel login error with HTTPS connection

Hi!
I have developed a Flex application which relies on remote object invocations to BlazeDS. I have applied custom authentication to the AMF channel, so login is required to invoke remote objects over the channel.
Application worked perfectly in development environment but at production environment I cannot get channel sucessfully logged in. I have debugged application and no response is obtained from server after channel.login() invocation. Backend resides on Apache Tomcat that listens on port 80. Server is fronted by a Proxy Server that sets HTTPS protocol (https://domain:80/context is set at browser URL although I request http://domain:80/context).
At development environment requests where made with HTTP protocol so I wonder if this issue is related with the HTTPS protocol present in the new server.
Do I need to configure my channels to use secure (HTTPS) communications? Why am I not getting any error response from channel login operation?
I reviewed server logs and It seems login AMF invocation are been tracked but I cannot get any response.
Thank you in advance.

Thank you Alex.
I've set this configuration in services-config.xml. First I tried using SecureAMFEndpoint but then I got an exception on Server that said a secure destination was needed (as it was secured) but was not receiving a secured request. I saw a post in a forum that said AMFEndpoint must be used instead of SecureAMFEndpoint when SSL is applied to a proxy that redirects request to Tomcat, not to Tomcat itself, and this is my case.
<services-config>
    <services>
        <service-include file-path="proxy-config.xml" />
        <default-channels>
           <channel ref="amf-channel"/>
        </default-channels>
    </services>
    <channels>
        <channel-definition id="amf-channel" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint
                uri="https://{server.name}:{server.port}/{context.root}/messagebroker/amf"
                class="flex.messaging.endpoints.AMFEndpoint" />
            <properties>
                <add-no-cache-headers>false</add-no-cache-headers>
            </properties>
        </channel-definition>
</services-config>
After setting this, channel is succesfully logged in and a remote invocation that is executed inmediatly after channel loggin is completed works OK. But when later I call another remote objects, I get request timeout errors and server is not reached.
Any idea of the issue?

Reciving mail via IMAP giving authentication error with valid details

Hi all,
Thanks to shannon,i changed the imap .. bt now error is with the connect method, the username,password,whcih iam passing as a parametre.Its giving error as authentication error, login failed.. but the username and password were corret..
store.connect(Host,username,password);
Host value iam passing is the server ipaddress,even i tried with 4 parameters including portas int type no use.
Please ,help to cross over this bug.
Thanks for you ll n advance.
Regards,
Chintu

Sorry for this late post but this is what debug says:
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information.
A0 CAPABILITY
* CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS
A0 OK CAPABILITY completed
A1 LOGIN user password
A1 NO Login failed.
Script threw exception: Sourced file: mail.java : Method Invocation store.connect : at Line: 11 : in file: mail.java : store .connect ( "host" , "user" , "password" )
Target exception: javax.mail.AuthenticationFailedException: Login failed.
javax.mail.AuthenticationFailedException: Login failed.
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:293)
at javax.mail.Service.connect(Service.java:234)
at javax.mail.Service.connect(Service.java:135)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at bsh.Reflect.invokeMethod(Unknown Source)
at bsh.Reflect.invokeObjectMethod(Unknown Source)
at bsh.Name.invokeMethod(Unknown Source)
at bsh.BSHMethodInvocation.eval(Unknown Source)
at bsh.BSHPrimaryExpression.eval(Unknown Source)
at bsh.BSHPrimaryExpression.eval(Unknown Source)
at bsh.Interpreter.eval(Unknown Source)
at bsh.Interpreter.source(Unknown Source)
at bsh.Interpreter.main(Unknown Source)

Primavera login error with Integration API (Ver. 8.3)

Dear all
Currently, I found one issue while using [Session.login] method on Primavera Integration API (Ver8.3).
[Codes]:
   DatabaseInstance[] dbinstance = Session.getDatabaseInstances(RMIURL.getRmiUrl(RMIURL.LOCAL_SERVICE));
   session = Session.login(RMIURL.getRmiUrl(RMIURL.LOCAL_SERVICE),
                                          dbinstance[0].getDatabaseId(),
                                          "UserId",
                                          "Password");
[Error Messages]:
com.primavera.integration.client.ClientException: Fatal error: null
at com.primavera.integration.client.Session.a(Session.java:387)
at com.primavera.integration.client.Session.login(Session.java:347)
at ite.test.main(test.java:29)
Caused by: java.lang.NullPointerException
at com.primavera.bo.datacaches.ServerUserPrivsCache.getServerUserPrivsCache(ServerUserPrivsCache.java:749)
at com.primavera.bo.common.b.a(LoginHelper.java:360)
at com.primavera.bo.common.b.a(LoginHelper.java:168)
at com.primavera.bo.remotable.SessionLifetime.login(SessionLifetime.java:57)
at com.primavera.bo.remotable.qproxy.SessionLifetime.login(SessionLifetime.java:76)
at com.primavera.bo.DBSessionLifetime.login(DBSessionLifetime.java:28)
at com.primavera.integration.server.ServerFacadeBase.login(ServerFacadeBase.java:434)
at com.primavera.integration.server.ServerFacade.login(ServerFacade.java:11)
at com.primavera.integration.client.LocalSession.login(LocalSession.java:94)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.primavera.integration.client.Session.a(Session.java:359)
... 2 more
Does anyone kind to help me to solve this?

rp0428 wrote:
Since that is a 3rd party API throwing the exception you will need to post in a forum for that API.
I'm locking this thread now.

Imessage login error with valid AppleID

Similar Messages

Maybe you are looking for