Imessage not functioning with restrictions 'on'

I just updated my iphone 4 to OS5. I activated imessage but when I turn restrictions 'on' imessage reverts to 'off' The restrictions that I have are : Facetime and Ping are 'off' and location and accounts are set to 'no change'. I can't see any logical relationship between imessage and restrictions. Does anyone have any ideas?
Thanks

Thanks so much Meg. Doesn't make me real happy though. When I want to send enhanced msgs and not get charged by my greedy service provider, I now know what to do. This begs the question, what is Apple thinking?

Similar Messages

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

    My passcode is working to unlock the screen but does not work with restriction passcode.
    Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
    Should restriction passcode be different from what i set?

    There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
    Forgot passcode for your iPhone, iPad, or iPod touch, or ...
    Do you have a backup which might not have this restriction passcode? If so restore to that backup?

  • IMessage not working with some contacts

    I have ipad2, iMessage not working with contacts except between my son and my iPad.  Get a red exclamation mark and send button is greyed out.  Have rebooted, reactivated apple id and email address.  Running latest software. Can anyone help please.

    Imessage only works to other folks who have a device on ios5, and who have activated i message.  In their set up, theyndeclared one or more specific 'receive at' addresses.  Are the folks you are trying to reach on apple devices with i mesage?  The red exclamation means, i think, that the apple server did not find that address as registered.

  • My Media Keys are not functioning with iTunes 10.6.1...

    My Media Keys are not functioning with iTunes 10.6.1... As i said
    Keyboard: Microsoft Digital Media Keyboard 3000
    I've actually had this issue since like what, 10.4? I've tried that dll fix thing and that does nothing. Any help out there so I can play my music without having to leave the micro player popped up all the time?

    And included on the retail sales box.
    http://www.apple.com/iphone/specs.html
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)

  • Status bar missing in Firefox 6.0, also Real player does not function with updated version, had to switch back to 3.6

    I've installed Firefox 6.0 about 3 times and each time I noticed that the status bar at the bottom of the page was missing. I relied upon the Norton Security "lock icon" which in version 3.6 would appear in the lower right hand corner of the status bar before signing in to websites or making transactions and found it very helpful. It was present in version 3.6 but not in 6.0. When I went back to 3.6 I suddenly had problems with the page freezing up so returned to 6.0 which corrected the problem but was not comfortable without the icon. I contacted Norton and via remote access the tech determined that the problem exists with Firefox's 6.0 version so he reinstalled 3.6 for me. Also I have a paid subscription to Real player Plus and it does not function with 6.0. I'm concerned because it seems you will soon phase out 3.6 and I will be without these functions which are important to me.

    I have a solution! Follow this link and download the older version. When I installed it, everything came back as it was before! Yay! Good luck to you all. And bad move, Mozilla, in not making it clearer what the system requirements were for the update!!!!
    http://www.macupdate.com/app/mac/10700/firefox

  • Why is it that image grayscaler code for website is not functioning with Mozilla Firefox, yet it does to other browser?

    I just noticed that my code(in my blog site), which is a ordinary code that allows image to turn into its grayscale form and hover its original color, is not functioning with Mozilla Firefox browser. But with other browsers, it's working. I hope you can help me with this little issue. Thank you!

    Does it use a CSS rule similar to:
    filter: grayscale(100%)
    This property is not yet implemented in Firefox. It is scheduled to be implemented in Firefox 34, according to https://developer.mozilla.org/en-US/docs/Web/CSS/filter

  • Imessage not functioning

    Hi,
    i have an iPhone 4 using iOS 6.1.3, my problem is that with certain contacts the imessage function does not function even though myself and the other contact has imessage activated, yet with others the imessage function automatically activates as one would expect
    any ideas or help....please!!
    Thanks

    Hello there, slowe89.
    The following Knowledge Base article is a great treasure trove of troubleshooting steps that should help with troubleshooting iMessages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • IMessage not working with one single contact

    My iPhone has stopped sending iMessages to one singular contact. Before today we have been using iMessage to communicate regularly. This is the only contact that iMessage does to not work with on my phone and on his he can iMessage me but I don't receive these messages. Also in group chats we can no longer communicate due to this issue.

    Did anyone fix this problem?
    This just happened to me yesterday!  I have iOS 7.1, had no issues until yesterday!
    I can iMessage my iMessage friends on my iPad with no problem, but the iPhone 5 randomlly decided yesterday that it would only iMessage selective people!
    I've tried everthing I can find so far.

  • DC not functioning with FSMO roles

    hello every body,
    I have 0 DC and 01 ADC lets say that DC and ADC. both were replicating AD and working properly. few days ago the motherboard of my DC failed and we replaced with new one. and obviously NIC card was attached with M.Board which also changed. when i boot up
    my DC, i see its not functioning as domain controller as i saw in server manager all FSMO roles are with red cross. i assign the ip address which it hold previous i.e 192.168.0.1. but still FSMO roles are disabled. While my only ADC is working properly with
    following errors and warning in AD DS roles. 
    Warning on ADC:
    The remote server which is the owner of a FSMO role is not responding.  This server has not replicated with the FSMO role owner recently. 
    Error on ADC:
    Log Name:      Directory Service
    Source:        Microsoft-Windows-ActiveDirectory_DomainService
    Date:          12/15/2014 11:18:07 AM
    Event ID:      1863
    Task Category: Replication
    Level:         Error
    Keywords:      Classic
    User:          ANONYMOUS LOGON
    Computer:      KHI-ADC.jehanpakistan.com
    Description:
    This is the replication status for the following directory partition on this directory server. 
    Directory partition:
    DC=ForestDnsZones,DC=jehanpakistan,DC=com 
    This directory server has not received replication information from a number of directory servers within the configured latency interval. 
    Latency Interval (Hours): 
    24 
    Number of directory servers in all sites:
    1 
    Number of directory servers in this site:
    1 
    The latency interval can be modified with the following registry key. 
    Registry Key: 
    HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours) 
    To identify the directory servers by name, use the dcdiag.exe tool. 
    You can also use the support tool repadmin.exe to display the replication latencies of the directory servers.   The command is "repadmin /showvector /latency <partition-dn>".
    My DC is working properly as a System.
    should i have to do something with my NIC or AD DS roles or i have to transfer FSMOs to ADC. or sieze fsmo roles of DC on ADC.
    please help.

    Is your DC (role holder) a DNS Server as well? I assume it is, if so open the server role properties and ensure the DNS server role shows the IP in the interface if it does not you may need to uninstall/ re-install the DNS server role (assuming it is a 2008
    R2 DC or above... Also did you look at your NIC settings? Did you re-establish the exact same NIC configuration as before?
    When the motherboard gets replaced and new NICS are introduced I normally look at the NIC settings and DNS Server roles... That is the Microsoft side of things. On the LAN/ WAN side of things if your network team has port security enabled on the switches
    the port may be locked down due to the new MAC Address.

  • Some hyperlinks do not function with FF 29.0.1 vista

    OS VISTA
    Firefox ver. 29.0.1
    Some links on some websites (eg. www.change.org) do not respond when clicked. (Others do.)
    Some objects on these pages do not function (eg. "thermometer" progress bar and "Sign" button)
    Pages work under Internet Explorer. (copy from FF address bar to IE address bar)
    Site used to work under FF 28. Site did not work with FF 29.0.
    Still using same add-ons as with FF 28 except added The Add-on Bar.
    No prefs changed.
    OS fully up to date.
    Adobe software fully up to date.

    The sign button appears, but it isn't active for 30 seconds, at least in my test. The page loads scripts from several additional sites during that process.
    To determine whether any of your extensions is involved, could you test some of the problem sites in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • Shift and CMD keys not functioning with other keys

    System Specs:
    15-inch, Early 2011
    Processor  2.2 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    Software  OS X 10.8.5 (12F37)
    Hello,
    My issue is with the keybaord of my Macbook Pro. Just yesterday I noticed the following problems with my keyboard.
    Error Issue:
    Right Shift key+D
    Right Shift key+C
    Right Shift key+E
    Left CMD+C
    Are all not functioning. I don't know what happened, I ran the keyboard viewer and tested all these keys out, the weird thing is that I can use the alternate keys on right and left, like shift and CMD.
    Please help your urgent feedback is appreciated.

    I suggest trying the following (check after each step):
    1) Reboot
    2) Reset PRAM using this procedure: http://support.apple.com/kb/HT1379
    3) Reset the SMC: http://support.apple.com/kb/ht3964
    4) check in a different user space (maybe it's a preferences problem)
    5) take to Apple store

  • Double Click Property Node not functioning with Queued State Machine

    I am writing an application which relies on input from the operator to start different steps in a process of steps.  I am using a queued state machine, however I cannot get the Double-Click property of my listbox to function with in this Queued state machine.  I have tried Creating a refrence to the Listbox and creating a property node from that refrence.  I have tried a property node of the control.  The double click functon works only if the queueing is not occuring.  It has something to do with the queue but I am at a loss as to what is causing it.  Any help would be GREATLY appreciated.  I have attached a simplified version of the state machine with the double click function.  Thanks for any help on this.  It is written in LV7.1
    Attachments:
    Test Q.llb ‏55 KB

    Hi
    Its  Simple....
    Your Properrty node is not getting read..... dont understand how..
    see the attachment...
    now laugh at your small mistake... (even i have the habbit of making such small mistakes ;-) )
    Message Edited by Tushar Jambhekar on 01-11-2006 11:38 AM
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog
    Attachments:
    Test Q.llb ‏55 KB
    Picture.JPG ‏44 KB

  • Imessage not working with iphone 4

    my imessage stopped working with my iphone 4.  it was working but then i had to restore it because it got deleted by mistake.  i've since restored it twice and it's still not working

    Apps and contacts can by synced back to the device through iTunes. The backup handles different content. This support document http://support.apple.com/kb/HT4946 tells you what is in the backup. If that doesn't matter to you, you can restore as a new device and see if that helps. There could be something in the backup that is creating the problem.

  • HT5538 Why is my iMessage not working with other email address just says verifying but nothing happens been a week, 4 devices only I

    iMessage not working on all my 4 devices use separate emails now cannot use them it just says verifying same with FaceTime?

    Hey Mgpr,
    There's an article that helps with troubleshooting steps for issues activating iMessage that I think is worth a look. See if any of the suggested steps work for you:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Sincerely,
    Delgadoh

Maybe you are looking for

  • Issues when using a Pixelink camera with LabView 9.0

    In my lab, we have a program for video acquisition using LabView and the low level camera functions for Pixelink cameras.  We run into some problems trying to run this program and other demo gui programs that came with the Pixelink SDK.  In our data

  • How To associate a default Template with an asset in web center sites 11g

    In previous versions we could associate a template with an asset, in the edit mode of the asset and that template would be used to render that asset when previewed. How can we do that in Web center Sites 11 g so that we don't have to select it again

  • Ethernet printer no longer available after upgrading Airport

    I had an older Airport wired into a router. An older ethernet printer was also wired into the router. I was able to print from various computers on the wireless network with no problem. Today I upgraded my dying Airport with a new Airport Express. I

  • Drag and Drop Midi file problem

    Hi, I have a simple mid file downloaded from internet that quicktime plays perfectly well, however, when I try to drag and drop it into an empty logic 8 project, all I get is a simple track with virtually no midi info (and no sound whatsoever). Is th

  • On time payment straight to 60 day late.

    Question for everyone out there. I have a few student loans that I fell behind on several years ago.(they've been current for 3 years now) They all list me as being on time with my payments and then suddenly list a 60 day late. Do you think this is s