Imessage not working in dubai or apple server is down ?

i have ipad2 and  i am facing problems with my imessage it worked for sometime then it stopped working suddenly , i dunno wether its blocked in uae or apple server for imessage or something like that is down !!!  everything is correct and i tried google dns which is 8.8.8.8 and didnt work also :S

ITs from etisalat, i contacted them today and look there replay on twitter .... >> iMessage and FaceTime are not enabled due to local regulations, shall there be any changes we will announce it. 
i cant ******* understand why there should be charges when we are already paying internet plans for iphone or ipad or through wifi... this is very bad strategy...

Similar Messages

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • I'm can't get iMessage to work with all my Apple devices.

    So i cant seem to get iMessage to work across all my Apple devices. My wife and I use the same Apple ID but have different phone numbers. Is there a way to get all our messages on our shared devices and our personal messages on our phones? (iPad, iMac, MacBook Pro: Shared)

    Hi,
    I have this set up with one Mac and two iPhones  (Not Multiple Macs)
    I added the Apple ID to the Mac for iMessages.
    I then added the Apple ID to the first iPhone.
    I accepted the pop ups on the Mac so that the iPhone was Listed in Receive At (you might have to Restart the App on the Mac to trigger this).
    I then added the Apple ID to the Second iPhone and again accepted the pop ups in the Mac.
    IF this is what you think you did but it is not working remove the Apple ID from both iPhones
    Place the iPhones in Airplane mode fro a few minutes to Break with the server.
    when back in normal mode and in Settings > Messages check the iPhone number is ticked and active.
    (Send a Test message to the Apple ID (Mac) to check)
    Add back the Apple ID if the test works.
    Restart the Mac version to trigger the pop ups and Accept.
    Repeat the set up with tests for send iPhone.
    I have never set this up with one ID on two or more computers but it should work.
    9:01 PM      Wednesday; June 4, 2014
     iMac (Mavericks 10.9.x)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),

  • IMessage not working with some contacts

    I have ipad2, iMessage not working with contacts except between my son and my iPad.  Get a red exclamation mark and send button is greyed out.  Have rebooted, reactivated apple id and email address.  Running latest software. Can anyone help please.

    Imessage only works to other folks who have a device on ios5, and who have activated i message.  In their set up, theyndeclared one or more specific 'receive at' addresses.  Are the folks you are trying to reach on apple devices with i mesage?  The red exclamation means, i think, that the apple server did not find that address as registered.

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • HT5538 Why is my iMessage not working with other email address just says verifying but nothing happens been a week, 4 devices only I

    iMessage not working on all my 4 devices use separate emails now cannot use them it just says verifying same with FaceTime?

    Hey Mgpr,
    There's an article that helps with troubleshooting steps for issues activating iMessage that I think is worth a look. See if any of the suggested steps work for you:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Sincerely,
    Delgadoh

  • Imessage not working on one of the phones associated with my account although imessage is turned on

    have imessage on but imessage not working on one of the iphones associated with my account

    The following may help http://support.apple.com/kb/ts2755

  • IMessage not working on 5S and iPad Air issues

    iMessage not working on 5S. Had 3 online chats with apple support but still not fixed. iPad air issues also; safari shuts down a lot on mine and my husbands iMessage not working. iMessage works on his 5S. Never had so many issues with Apple before. I receive SMS messages on 5S but no iMessage. It was suggested to me that I get a new sim or try another wifi, both seem odd given everything else works.
    My husband and I got our phones the same day, his works right, mine doesn't.
    iPad airs were purchased a month apart, mine works ok apart from safari shutdowns and his iMessage not working.
    Also the slider to answer calls on both phones not always working. Had to reboot one of them and it forced us to set it up again from scratch.
    Any ideas?

    restore from backup or restore as new.

  • IMessage not working after IOS7 install?

    iMessage not working after IOS7 install?

    Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

  • Imessage not working propierly, doesnt show read below the message.

    imessage not working propierly, when I send a message its says delivered but when people read them I never get the read receipt below the message, i have the 4 gen ipod, please help!

    Here's how I fixed the issue.
    I did an iCloud backup
    Did a full reset
    Restored backup and guess what.... it didn't fix the problem.
    However.... here is what did fix the problem
    I went into Settings --> Messages
    Listed under the "Send & Receive" button it only showed one address listed.
    On the 'You can be reached by iMessage at'  it only had my email address there with a check mark.  My phone number was unchecked but i couldn't check it for some reason.  So what I did was click on my Apple ID at the Top and choose view account.  Entered in my password and that made the phone number show as checked.  Then I started getting iMessages on my iPhone again.  If that doesn't work.  Click on Apple ID at the top and choose LOCATION

  • Imessage not working in iphone 5

    Imessage not working on my iphone 5 and it is activated in setting !!!

    So what happens when you send an iMessage?

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Not working in Dubai

    New update not working in dubai. Using hotspot shield it is not working. Now skype is worst. Pls help.

    SajedaKhatun wrote:
    New update not working in dubai. Using hotspot shield it is not working. Now skype is worst. Pls help.
    Please visit this link: https://support.skype.com/en/faq/FA391/is-skype-blocked-in-the-united-arab-emirates-uae?q=uae
    Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time.
    If you found my post useful, please give "Kudos".
    If it helped to answer your problem/question, please mark it as "Accepted Solution" so other people can find it easily.

  • Old Netscape console 4.2 not working properly with new Directory Server 5.2

    After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
    http://docs.sun.com/source/816-6734-10/index.html
    which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
    Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
    I got the same message for these 2 files:
    admserv42.jar
    msgadmin52.jar
    After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
    class com.netscape.management.admser.AdminServer not found
    After that I erased all the files created by the script and I get these messages:
    failed to install a copy of admserv51.jar or one of its supporting files: null
    failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
    and for admserv42.jar I get the same message
    Does anyone have a clue on what to do next??
    thanks in advance
    Eduardo

    The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

  • Swf is not working properly when upload to server

    I develop 1.swf which is having 3 buttons each one having
    anather .swf to call 2.swf, 3.swf respectively.
    This application is running perfectly on my PC, but
    While uploading the swf to server the 2.swf and 3.swf is
    not running. Can any one tell how to recover from this kind
    of problem.

    justbipin wrote:
    > basically my code working perfectly,
    > but its not working properly when upload to server
    > can anybody having any ref. or link to solve this
    issues.
    why is that we insist on seeing the source file ?
    There is no one way of doing things in flash and no one can
    help
    you based on "does not work description".
    This is way to broad of a subject to even try to guess.
    Same as asking "my car does not work, what's up with
    that"....
    Please upload the problematic file and provide url for us to
    check.
    Otherwise you need to try to troubleshoot it yourself as we
    can't
    guess from here what possibly is wrong with that file.
    Regards
    Urami
    Happy New Year guys - all the best there is in the 2006 :)
    <urami>
    http://www.Flashfugitive.com
    </urami>
    <web junk free>
    http://www.firefox.com
    </web junk free>

Maybe you are looking for

  • How to fully delete safari from mac hard drive

    I'm using OSX 10.6.8 and a few weeks ago thru the automatic "Software Update" was offered an update to Safari. Unfortunately I didn't feel the need to check if it was compatible with my version of Snow Leopard. After installing, I was "then" told it

  • How to recover the database when some of the archive log file get deleted.

    I am facing a problem with Oracle database, which is related to archivelogs. Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog. When the database was in running condition, disk go

  • How to add "Product Unit" while entering a new price for a product?

    Hi All, I recently created a product in CRM.(in web ui)  .Then I navigated to the Price assignment block anc clicked on New.In that under the "rate" heading there is a field "Product Unit" for which I have no value in search help maintained..Now, how

  • View V/s Extract structure in generic data source!

    Hi, Is it mandatory that view and extract structure must contain same number of fields in generic extraction? can we enhance the extract structure with a field which is not existing in view? clarify me with exmaple Thanks, Ravi

  • Printing a portion of a Numbers Spreadsheet

    I've generated a spreadsheet in numbers, and I would like to print a portion of the spreadsheet. I have selected the portion I want to print and and I select print preview the whole page is given to print, multiple pages,etc..It's a simple spreadshee