IMessage not working on ipad send button not highlighted

Imessaging worked on Ipad before last update. Tried turning on and off, tried resetting, I type message and send button not highlighted

1. Messages on the iPad can only be sent to other iDevices
2. They must also be registered with iMessage
Note: The two above conditions must be met.

Similar Messages

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

HDMI adapter does not work on IPad 2. Not unique to this cable or to my ipad

I bought the apple branded HDMI adapter for my new IPad 2. When I plug it in it will give me a black screen and will, at most, very very sporadically flash the ipad screen for about one second then go back to black. Before assisting please read below to see what I have tried already:
I tried the cable on 2 different IPad2s and an original IPad.
I tried a different cable of the same design on 2 different IPad2s
I tried using both cables on two different tvs and using two different hdmi cables
I also tried powering off
I also tried running for-sure-supposed-to-work apps (although the IPad2 should mirror so that was unnecessary too).
I took to the Apple Store and they had no clue what was going on either. Anyone know if this adapter is just a defective product in general? What other things can I do to put my IPad on the tv...it was a large part of why I bought it.

Don't know if this will help, but this is the procedure I use to get mine to work:
Insert HDMI cable into TV port.
With TV on, select input to HDMI port on the TV that the cable is connected to.
With the iPad in sleep mode attach adapter with HDMI cable and power adapter connected to iPad.
Turn iPad on (take out of sleep mode).
This works for me every time.
Also heard that a while ago Apple produced a batch of bad HDMI adapters. This could have happened again or not all the bad ones got sent back.

Polarioid pogo printer not working with ipad and iphone

And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo. Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind. This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
I come from a photograpic background. I got the Pogo as soon as it came out. I quite literally was on Polaroid's website every day checking to see when I could order it. Having "instant" sticker prints is wonderful at family picnics with all the kids. While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released. So I took that as the sign that it was probably never going to happen. (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me. But, yes, it would be nice.)
I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints. Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340. But it's still Bluetooth only. So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon. IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing. But considering Polaroid's financial issues, I'm not holding my breath

Imessage is not working on iPad mini

I can't get imessage to work on iPad mini. I've restarted, turned message on/off, and signed in/out of apple id and it still doesn't work

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

Original iPad down button not working

The down button is not working. Only up button works. I can use my apple earbuds volume control on earbuds itself for up and down. Any ideas on how to fix this?

sounds like the switch for the button is broken would likely require repair

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan

Flash Variable is not working in Ipad

Hi Experts,
I'm facing with an issue, could you please suggest me your valuable suggestions.
I have created Two dashboard (Example names A1 and B1), I need to open the dashboard B1 without asking credentials, when I select an Image in A1.
To work in such a way, I have created a flash variable and pointed the range to cell J1.
I have placed a URL button on top of image in Dashboard A1. I have copied following URL in a cell, and this URL I have pointed to URL Button.
URL= (="../../../Xcelsius/opendoc/documentDownload?iDocID=M1TVABCADjs2AHoAlg123AAgoBpgwAAAA&sIDType=CUID&CELogonToken="&J1)
Opening B1 dashboard from A1 is working fine in desktop and in Android tab, but it is not working in Ipad. Not working in Ipad in the sense a new browser window is opening with empty page.
I have tested in another way like, passing opendocID and Flash variable to the URL button, It is working fine in Ipad but asking for the credentials.
Experts could you please suggest me some solution.
Ipad is Ipad2 and BO Version is 4.1 SP4.
Thanks & Regards
Karthik M

Hello,
You hyave to use the special flash variable "CELogonToken"
Would request you to check http://scn.sap.com/docs/DOC-36362 this is a SCN document
with title "Step by step way to create parent child dashboard in BI 4.0/4.1 using flash variable".
SWF loader is not supported for mobile.
Best regards,
Mohamed AISSA.

Letter F not working on iPad

Letter F not working on iPad 2..have to press real hard to get it working

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Quicklook (jpg) is not working in iPad Air

Quicklook (jpg) is not working in iPad Air; only option is airdrop or sharing/opening in the apps - Flickr, Dropbox, PS, etc.

Are you saying that when you receive an email that has a photo attached you cannot see it in the Msil app?
Try quitting the mail app and then reset the iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

TS1702 The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them.

The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them. I had to go through iTunes in my computer and sync.

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

ICloud Contact Groups Not Working on iPad

I made a contact list on iCloud.com via my Mac Book (OS X Yosemite). The groups I created there do not work with iPad Air 2 mail. They show up on the iPad, but I cannot send emails to my groups. What do I need to do to make groups work?

Maybe the backup is corrupted.
Turn off iCloud backup and try deleting the iCloud backup for the iPad.
iCloud: Remove an iOS device backup from iCloud - Support - Apple
Then turn it back on and try to backup.
You can also try removing your iCloud account from the device and then re-add it.
Note: This will cause you to lose everything but the last 30 days of photos in your My Photo Stream so take precautions.

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

Multi gestures not working on iPad Air ios8 onwards

Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
ITs it's almost like they don't care
come on Apple sort this out !! It's been too long

IMessage not working on ipad send button not highlighted

Similar Messages

Maybe you are looking for