IMessage not working when I start a new conversation iOS 6

Hey guys, the thing now is that since I updated my iPhone 4S to iOS 6 is like the phone does not recognize my iMessage contacts.
I can use iMessage, but the thing is that I only can send an iMessage if I go to my messages box and open an old iMessage conversation.
If I want to start a new conversartion the send button never turns blue.
I even tryied from Siri. Didn't work.
It is not so bad but still annoying.
As an additional information, in Ecuador, they just added a new digit in the international code. It shouldn't be a problem because my mobile number is already accepted by iMessage on my iphone settings.
Hope you can help guys. I would be very grateful.

UPDATE:
I just discovered that the problem is that from my Messages software in my iMac mobile numbers are not recognized (even if they were accepted on the iMessage settings on my phone).
If I send a message to my imessage contact, that contact receives it as a normal SMS but when he answers it is sent as an iMessage and then I can reply as an iMessage.
But it is not possible to avoid the waste of that SMS.
Maybe is the new digit thing.

Similar Messages

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

How can you remove old conversations from the iMac. Even when I remove them they return when I start a new conversation with the same person. Only happens on iMac with the Beta iMessage program

How do you remove an old conversation using the Beta iMessage on an iMac. When I open a new conversation with the same person the old conversation comes back

Hi,
Previously iChat had tried a Last Chat/IM option when using Saved Transcripts - which itself was an option.
iChat has also tried "Saving" the Last Chat by leaving a Chat window open and using something similar to the Lion method of showing an app in the state is was closed in.
In Messages the option to Save Transcripts has been removed and Chats or all types are saved as a matter of course.
What this tends to mean for your iChat style Buddy Chats is that it opens all the Transcripts for that buddy as a sort of History you can scroll back through if you want (I have some Buddies with saved chats gong back to 2004)
With the Syncing of iMessages with iPhones and iPads (or Touches) then it seems this works slightly differently.
Although you can delete the chat and the contents of the Chat as separate action it is true that in the Beta as soon as you connect to the same Contact that the contents of the previous chats are shown to you.
I have found that Messages stores a data base of info on iMessages in Your Home Folder/Library/Messages
I have found that deleting this chat-db removes the "History" that keep popping up.
By default the Saved "iChats" are also stored in the Home Folder/Documents/iChats (At least this is the default place iChat used and they go to the same iChats folder where ever you had it)
Some people claim removing iMessages saved here stops the "History" reappearing.
In Lion the only access to the Home Folder/Library is via the Finder's Go Menu and hiding down the ALT key
10:00 PM Sunday; June 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why is iMessage not working when I cross to Canada?

I had no isssues till I upgraded to iOS 6 and from there.. iMessage stopped working when I'm at work even when connected to wi-fi. I put my iPhone on airplane mode so I don't get over charged and use the wi-fi at work to keep all data active but it seems iMessage stopped working on airplane mode even with a wi-fi connection. I even noticed that my iPhone no longer connects wirelessly to my iTunes when I'm at work.
I live in the state of Michigan but work in Canada and when I cross I place the iPhone on airplane mode and just use the wi-fi but now after the iOS 6..iMessage doesn't seem to work till I cross back to the states, remove the airplane mode and all text including the iMessage texts come at once. I use iMessage to comunicate with my son (iPod).

Try signing out of iMessage and signing back in while in the U.S. That should resend the activation text message.

TableView updates not working when ValueFactory returns a new Binding

Hi,
When a cell value factory returns a newly created expression or Binding cell values will stop receiving updates at some point. It seems that the cell that requests the observable value from the value factory does not keep a strong reference to the returned value so the cell will only receive updates from the the Observable value as long as it has not been garbage collected. The code below reproduces this issue:
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.ReadOnlyStringWrapper;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.beans.value.ObservableValue;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableColumn.CellDataFeatures;
import javafx.scene.control.TableView;
import javafx.scene.layout.HBox;
import javafx.scene.layout.HBoxBuilder;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.layout.VBoxBuilder;
import javafx.stage.Stage;
import javafx.util.Callback;
* Reproduce cell update bug. Compile and run the class. Press the update button a
* couple of times and note how the values in the total column update. Press the
* GC button a couple of times and then press the update button again. Note how
* the values in the total column do not update anymore.
* The Value Factory for the total column does not return a property that is
* held by the Order object, it returns a Binding that is created on the fly.
* The cell does not hold a strong reference to this object so it can be gc'd
public class CellUpdateTest2 extends Application {
     static class Order {
          String name;
          DoubleProperty price = new SimpleDoubleProperty();
          DoubleProperty qty = new SimpleDoubleProperty();
          Order(String n, double p) {
               name = n;
               price.set(p);
               qty.set(1);
     final Order items[] = {
               new Order("Item 0", 4.0),
               new Order("Item 1", 5.0),
               new Order("Item 2", 6.0),
               new Order("Item 3", 7.0),
               new Order("Item 4", 8.0),
               new Order("Item 5", 9.0),
               new Order("Item 6", 10.0),
               new Order("Item 7", 11.0)
     @Override
     public void start(final Stage primaryStage) throws Exception {
          final Button updateButton = new Button("Update Values");
          updateButton.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(final ActionEvent actionEvent) {
                    for (Order i: items) {
                         i.qty.set(i.qty.get() + 1);
          final Button gcButton = new Button("System.gc()");
          gcButton.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(final ActionEvent actionEvent) {
                    System.gc();
          final TableView<Order> tv = new TableView<Order>();
          final TableColumn<Order, String> nameCol = new TableColumn<Order, String>("Item");
          final TableColumn<Order, Number> priceCol = new TableColumn<Order, Number>("Price");
          final TableColumn<Order, Number> qtyCol = new TableColumn<Order, Number>("Quantity");
          final TableColumn<Order, Number> totalCol = new TableColumn<Order, Number>("Total");
          nameCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, String>, ObservableValue<String>>() {
               @Override
               public ObservableValue<String> call(final CellDataFeatures<Order, String> d) {
                    return new ReadOnlyStringWrapper(d.getValue().name);
          priceCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
               @Override
               public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
                    return cellData.getValue().price;
          qtyCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
               @Override
               public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
                    return cellData.getValue().qty;
          totalCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
               @Override
               public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
                    return cellData.getValue().price.multiply(cellData.getValue().qty);
          tv.getColumns().addAll(nameCol, priceCol, qtyCol, totalCol);
          tv.setColumnResizePolicy(TableView.CONSTRAINED_RESIZE_POLICY);
          tv.getItems().addAll(items);
          final HBox hb = HBoxBuilder.create().children(updateButton, gcButton).build();
          final VBox vb = VBoxBuilder.create().children(tv, hb).build();
          primaryStage.setScene(new Scene(vb));
          primaryStage.setHeight(200.0);
          primaryStage.show();
     public static void main(final String args[]) {
          launch(args);
} Is this expected behaviour?
If so - what would the correct way to approach this?
If not - is there an easy workaround?

this seems to have worked....
     static class Order {
          String name;
          DoubleProperty price = new SimpleDoubleProperty();
          DoubleProperty qty = new SimpleDoubleProperty();
                DoubleProperty total = new SimpleDoubleProperty();
          Order(String n, double p) {
               name = n;
               price.set(p);
               qty.set(1);
                public void updateTotal() {
                    total.set(price.get() * qty.get());
     }with
          qtyCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
               @Override
               public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
                                System.out.println("in qty column");
                                cellData.getValue().updateTotal();
                    return cellData.getValue().qty;
          });and finally
          totalCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
               @Override
               public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
                                System.out.println("in total column");
                    return cellData.getValue().total;
          });I cannot explain why what you did did not work. I have a mistrust towards binding and I avoid it when ever possible.
thanks
jose

Filters on CSWP not working when Scheduling Start Date sets Immediate Value

In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it does not displays filtered data.
Please provide some resolution for this issue.
I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
or can we restrict user to use specific date only?
Thanks in Advance.

This is a new one on me.
It's a server program to interface with QuickTime and some other problematic services.
If you use video or 3D in Photoshop Extended, you probably need it.
Sounds like you are correct in that it has to do wtih Quicktime. Do you have PS extended?

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Speakers not working when using iTunes on new Dell computer

I just got a new Dell Latitude e4300 laptop and the speakers will not work with iTunes. I can play audio from any website, but am getting nothing in iTunes. Any idea why this would be? Any fixes for this?
Jeff

Hi,
Please try to diable HDMI sound from Playback devices
Right click the speaker icon,
Select Playback devices
Right click HDMI sound
Disable it.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why do hyperlinks not work when Firefox loads a new web page?

Today, for no apparent reason and for the first time ever in years of using Firefox, I am finding that when a new page loads I cannot select any of the hyperlinks on the page. This is happening on 90% or more of pages I access. If I navigate to a different application (using Alt+Tab for instance) and back to Firefox, the hyperlinks will work. But if I select one of them and a new page loads, I am back to being unable to click on hyperlinks.
This is manifested by the cursor remaining as an arrow and not changing to a pointy hand when hovering over hyperlinks. It also seems to affect the ability to use the GUI buttons and the minimise/restore/maximise/close buttons in the top left corner of the title bar. Ribbon menu items, curiously, seem to work as normal, except that if I open, say, tools/options, I will have to navigate away from Fireox and back again, before being able to use the Options window that opens. It also prevent me from selecting other tabs. And I'm even having trouble using the Mozilla Support Forum form to post this question.
I have tried running Firefox in safe mode and reinstalling the software, all to no effect
== nothing in particular happened

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Gnome-panel not working when auto-started in openbox

Salut,
trying to get openbox to work with gnome-panel. Everything works fine if I run gnome-panel when openbox is already started.
But when trying to add gnome-panel to the autostart.sh with
(sleep 1 && gnome-panel) &
as the last line, I get the error message
========================
The panel encountered a problem while loading "OAFIID:GNOME_ClockApplet".
Do you want to delete the applet from your configuration?
========================
for 3 or 4 applets. How to solve this?
Thanks in advance,
Stefan

I found a workaround for the problem.
Install xfce4-panel and xfce4-xfapplet-plugin and you will be able to run the gnome applets in the excellent and lightweight xfce4-panel.
It works fine for me

Why is my left audio output not working, when I have brand new headphones? (6th Generation Ipod Nano)

I have recently been having problems with my Ipods audio output... The Left headphone puts out No sound at all... I am positive it is not my headphones... Any solutions or is it a harware problem??
Hope to hear Back ASAP thanks

iPod Nano Touch? (I must have missed the announcement of that model of iPod!)
Regardless of which model of iPod you have (and if it's a Nano, why submit your question to the Touch forum?), some car charging devices charged iPods via the firewire line, which was fine for the first iPods on the market. Some later iPods charged by firewire or USB. New iPods do not have firewire and cannot be charged by firewire. They only charge by USB
So perhaps your old iPod (again, whichever model it is) charged by fireware.

Mail not working when connected to a new network

Whenever I connect to the network at work I can't send mail. I can receive mail though. I can't use my airport at work. Could this be the problem?
Thank You
Tamara

Unless your employer has a wireless router and wireless network, you can't use Airport when at work.
Assuming you have a business email account provided by your employer, you can't send mail with your business email account either when connected to your employer's network and internet access at work?

Safari web browser not working when the iPad is upgraded to ios 4.2

I have just upgraded my ipad 1 to ios 4.2. Now my safari browser will not stay on selected website...it just takes me back to the desktop menus. It worked perfectly before. If possible I will go back to original setting...but how?

Tap Settings / Safari. Clear the History, Cookies, and Cache.
Restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.

SP2013: OK button not working when editing Settings on List app

Hi, all! Currently running Sharepoint 2013 under Server 2008 R2. My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11. I am currently a Domain Admin for our corp domain.
Long story short, I've created a test List app. When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app. No access spinning, no errors on-screen (also none visible when I view
the source of the SP page or header), no nothing. The highlight of the button changes as expected, but nothing else. The Cancel button will Cancel as expected, but OK does nothing whatsoever.
My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read). A Check Permissions on myself yield the following:
Full Control | Given through the "~site~ Owners" group.
Read | Given through the "~site~ Visitors" group.
Edit | Given through the "~site~ Members" group.
(Note: "~site~" is replacing the actual SP2013 site name above)
I'm thinking it has something to do with effective permissions. I just added myself to the Owners group this morning with no effect. I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either. Suggestions
are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
Thanks, guys!
Steve

Hi Steve,
From your description, my understanding is that OK button does not work when you create a new column.
Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
Besides, please try to create a new column with steps below:
1.
Click LIST tab in the Ribbon.
2.
Click Create Column in Mange Views section.
3.
Create your column in the dialog.
4.
Click OK button.
In addition, please confirm these points below:
1.
Test your issue in another list.
2.
Test your issue with another computer.
3.
Test your issue with another account.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

IMessage not working when I start a new conversation iOS 6

Similar Messages

Maybe you are looking for