IMessage (on my iPhone) still says "waiting on activation"

I recently restored my phone to its factory settings just so I could have a fresh start. I have IOS5 . The problem is that ever since i restored it my imessage still says waiting for activation and it wont recognize my phone number as the "recieve at" id!!! how do I get it activated and get it ot recognze my phone number!!!i have tried everything please help!!

I have a solution to all of you who faced this problem of waiting for activations for both FaceTime and iMessage.
Here's how I did mine;
For "FaceTime"
1) Launch "Settings" app
2) Select "FaceTime"
3) Select "Apple ID: (your ID)"
4) Select "Change Location" (to where "Country" your phone number is registered)
5) Select the "Country" you are in
6) Back to "Settings"
Do the same for "iMessage"
1) Launch "Settings" app
2) Select "Messages"
3) Select "Receive At"
4) Select "Apple ID: (your ID)"
5) Select "Change Location" (to where "Country" your phone number is registered)
6) Select the "Country" you are in
7) Exit
After you've done all the settings as aboves; Now hold down the "Home" and "Power" button until you see the "Apple" logo to reboot your iPhone. Let go you fingers after seeing the "Apple" logo appears.
Go back to the "Settings" app.
For "Facetime"
1) Select "FaceTime"
2) You'll notice your "FaceTime" has been activated
3) Go to the bottom and Select "Caller ID"
4) You should have your "Phone Number" selected
5) Back to "Settings"
For "iMessage"
1) Select "Messages"
2) You'll notice your "iMessage" has been activated
3) Select "Receive At" (now you'll see "2 Addresses >)
4) Go to the bottom and Select "Caller ID"
5) You should have your "Phone Number" selected
6) Exit and enjoy your iOS5
Hope that helps. Cheers!

Similar Messages

  • I have an iPhone 5 and updated it to iOS7 but now I can't use iMessage or FaceTime as it says "waiting for activation" and won't let me use my phone number to do iMessage or FaceTime either

    I have an iPhone 5 and updated it to iOS7 last night but now I can't use iMessage or FaceTime as it says "waiting for activation" As well as that, it won't let me use my phone number to do iMessage or FaceTime it will only let me use my apple ID which I don't want to do.

    Thank you for replying.    Yes I deleted the old email address..   

  • My imessage is working when im signed into my apple id butmy phone number is still not activated, my imessage still says waiting for activation how do i fix it ?

    My imessage is working when im signed into my apple id butmy phone number is still not activated, my imessage still says waiting for activation how do i fix it ?

    Go to Settings > Messages and turn iMessage OFF.
    Then go to Settings > General > Reset and tap Reset Network Settings. Your phone will restart. You will not lose any data, but you will have to re-enter any Wi-Fi network passwords.
    Once the phone has re-started and you have a network connection (either 3G or Wi-Fi), turn iMessage back ON.

  • I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    Here's a good troubleshooting article about imessage "waiting for activation".
    http://support.apple.com/kb/TS4268

  • My iMessage and Facetime still say "waiting for activation" after 48 hours

    My iMessage and Facetime still say "waiting for activation."  It's been two days and it still says the same thing. I called customer service an they weren't any help whatsoever. Please helpppp!:(

    Yea.. 2hrs with Apple and no help whatso ever. Mines been like that since the day of release of iOS 6, serveral days have past and its getting very irritating with no answers.

  • TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

    Hi,
    My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
    Thanks

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    Have you tried to reboot your phone(hold home and lock button simutainiously)?

  • TS2755 Did all of this trouble shooting and my Imessaging still says waiting for activation. Don't know how to fix it.

    Don't understand why my Imessaging stopped working. If I go to settings messages and check out Imessaging it just says waiting for activation.

    Change the DNS servers of the wifi network to 8.8.8.8, 8.8.4.4
    Go to settings>general>date&time> set automaticly , turn it on if it wasn't
    then settings>general>reset>reset network settings
    restart the phone

  • TS4268 how can i get my imessage to work  it just says waiting for activation

    My iphone 5 showes my imessage as waiting for activation  whats up with that

    3 of us are having same trouble anyone else any suggestiond

  • My iMessage still says "Waiting for activation...

    I tried literally every single one of your solutions and nothing worked.
    I ported my number from Reliance to Vodafone.Total pain in the backside. I want to send iMessages from my own number, not my email address.
    Please, please someone else?

    Hallo Brad,
    I didn't get an email but first a warning that my carrier might charge me for the text message that would be used to activate. Said OK. Messages activated and my phone number was added below the email address. I now have two 'recieve at' addresses.
    Don't know if this hepls but you can stop worrying about the 'missing' email.
    Good luck. A

  • I had to restart my phone, and when i did and it turned back on my imessage wouldn't work. it still says "waiting on activation" any ideas on how to fix that?

    i need help! I can't send any imessages! please!

    Follow the article below to troubleshoot the issue
    http://support.apple.com/kb/ts4268

  • TS4268 Still says "waiting for activation".

    I know that the imessaging servers are back up. But my phone's imessaging still isn't working. What do I do?

    Did you follow all of the suggestions in the support document that you came here from http://support.apple.com/kb/TS4268? If you did, try turning it off again, wait a moment, then turn it back on again.

  • I cant activate my imessage or facetime, it just says 'waiting for activation'

    its really annoying, it worked fine before i had a sim swap

    Hello there
    I had the same problem. To fix this I simply turned of facetime and massages and reset my network settings.
    To do that General>Reset>Reset Network Settings.
    Hope this helps.

  • Vodafone India customer....on my iPhone5, imessage and facetime are giving error "waiting for activation"

    Hi
    I have iPhone 5 with Vodafone India connection. The major challenge is Facetimche & iMessage giving error "waiting for activation"
    I have tried all the available solutions in Google search but still no change.....
    Please help in getting this sorted out!!!
    Thanks
    Atin

    Level 1 (0 points)
    chakkochi 
    Re: My iMessage still says "Waiting for activation..." Jun 17, 2012 10:04 PM (in response to bradfromwinnipeg)
    Hi All,
    This problem is solved for me, with some help from the carriers. At last
    Let me describe my situation once again.
    I am from India, where the official iPhone carriers are Airtel and Aircel.
    I have two prepaid connections - One from Airtel and one from Reliance GSM
    Whenever I try to activate iMessage from my Reliace SIM, it shows activation unsuccessful, the the receive at shows my email ID only.
    But whenever I try activate it using Airtel SIM, it activates just fine. But since my primary connection is the Reliance one, I wanted it to get activated for Reliance.
    I have tried every tweaks/restore etc mentioned in this discussion, but nothing worked.
    The solution:
    This does not require any jailbreak/restore. Just a little help from the carrier.
    For all reliance GSM customers in India, you can just try to activate in again. I think they have solved it for all customers.
    I was almost lost hope of activating imeesage on Reliance. But then one of my friends bought a new iphone (4S). He had a docomo connection, and he also had this same issue. But using his contacts in docomo, he enabled some trace in his connection, and found out that the phone was trying to send SMS to a UK number (short code), which is blocked by their RA team.
    This is that magic number : 00445773142076
    So from him, I got the number. I raised a complaint with Reliance.
    The complaint had nothing about imessage, but it said: "I am unable to send international SMS to the number 00445773142076, even after having sufficient balance and an active SMS plan"
    So they have done some 'unblocking'  and called me this morning and asked to try again 'sending sms to the same number' . I went to settings and activated imessage and facetime/ Thats it !!!!.
    A big thanks to Reliance GSM support for the quick solution.
    For anyone on Reliance GSM in India, just try activating it now.
    For others, log a complaint with the carrier that "you want to send SMS to the number 00445773142076.
    Thanks all

  • TS4268 under settings messages, it says "waiting for activation"

    I'm connected to wifi, can connect to itunes using the same account, and changed my password to have a capital, number, and lower case to match the current requirements, but it still says waiting for activation, and when I try to log in with my apple id it says to check my network. Anyone know how I can fix this? I'd like to use iMessages..

    Try the steps in this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation
    Troubleshooting Apple ID activation
    After each step, toggle  iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
    If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    In Settings > General > Date & Time, ensure that Set Automatically  is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Enable  iMessage and FaceTime while connected to another Wi-Fi network in a different location.

Maybe you are looking for

  • Macros in abap

    Hi Is there any way I can see the Macros in abap? ( I mean over view ) . Cheers Usman

  • CM29 - bar graph not display in WebGui while is it visible in GUI

    Hi, We are trying to see and work on CM29 through SAP GUI for HTML. After making required settings it not pulling up BAR Graph into WebGui and saying error message "Unknown Error:RFC". We have checked on IGS RFC settings and all are working fine but

  • No sound recording avi files using Camileo S20

    Hi all I got the s20 on thursday and it has been a nightmare. Before the sound went i couldn't get the video files to work in Movie Edit Pro or sony vegas. It didn't even work in the Arcsoft software that came with it. I have tried it on three differ

  • Help sql-- select max

    I would select max from a table. For example the table is: Person with Name Surname Age and i want to extract the perso with max(age). If i write: select max(age), nome from person group by nome; the outpup isn't Person1 30 but person1 30 person2 25

  • How can i custamize my window

    i have too many facebooks on my screen i have too many search on my windows how can i delete some of bookmarks