Imessage switched on, on both phones but imessage is not working
This is happening with a few people and a friend and I cannot imessage each other, despite the fact that we both have imessage switched on?
DestroyerDrak wrote:
I recently bought the Apple Care Protection Plan and I got my iMac registered for it. However, I cannot get my Time Capsule, purchased months before the Protection Plan, registered.
That's correct; it's covered, but you can't register it separately for some reason. (I went through this with Apple a couple of years ago myself.)
Just keep your receipts, preferably with the serial number, in case you ever have a problem.
Similar Messages
-
Im trying to change address on both phones! 150 number not working!
im trying to change my address on both phones, 150 number not working, customer service one not working either, i just want someone to change it online, ee is so annoying!!
Glad it is working for you. I suspect until they get the problems sorted, they are not doing the upgrades, as the weather has been bad and so need to get any damages sorted first, to make sure that people can connect.
-
I have the Kindle app on my I pad
I want to eliminate the books I've already read (I have a LOT).
On the regular kindle you can switch between cloud and device but that is not working on my I pad.
HELP.
ThanksThe Kindle app has a menu on the very bottom center of the screen that allows you to switch from a device and cloud view. To remove a title from the device, tap and hold on it. a pop menu will apear that allows to add the title to a collection, remove it from the device, or download it from the cloud (depending on its current status).
-
I cannot get my itunes of app store applications on my iphone to load. I have restored the phone, but that did not work. They just say loading fore a long time
Maybe you'd have to contact an Apple Store or the carrier who handles
the phone, about how to reset it. There should be some helpful motions
and efforts to attempt to re-connect the vehicle to the iPhone, there.
Perhaps there's a firmware update for the vehicle at an authorized agency...
Looking ahead, when looking into newer 2015+ models, test with a phone.
Good luck & happy computing! -
My imessages worked on minute and the next it would stop working so I updated to ios7. Now it does not work at all. Now I am unable to do any back up on this phone. What else can I try?
Burrning-Bunny I have tried that I even went to the Apple store and they told me to reset my password and try again, but that did not work. I reset the time and date, tried to refresh settings. getting frustrated to say the least.
thanks. I appreciate any help though. -
Both FaceTime and iMessage is not working on my Macbook Air
My facetime and imessage both randomly stopped working last week. I upgraded to Mavericks a few weeks ago but have only been having an issue for around a week. I have found that they do work if I log into my guest account, but they do not work on my main account. I have even reinstalled Mavericks, but have had no luck.
Any help would be amazing!aiizaztarliq21: I solved my problem, and here is how I did it. I don't know if it will work for you or not, but it's worth a shot.
1. Make the time zone on the Mac not automatic (but correct to your time and zone), and change something in that pref. pane so that it overwrites the old prefs file.
2. Log out of iMessages, iCloud, etc., on your iOS devices
3. Un-associate your Apple ID with your computer user login (in System Preferences > Users and Groups).
4. Sign out of iCloud on your Mac.
5. Reboot.
6. Re-associate your Apple ID with your user login. If you see a caution icon next to it, double-click. Should disappear.
7. Launch iMessages and attempt to log in.
8. Then log in to iCloud via System Preferences > iCloud
If that doesn't work, do these steps, then go back to # 1, above.
9. Delete all the Apple tokens and keys in the Keychain (might break some other things--may be why I can't log in via Safari right now).
10. Reinstall Mavericks/OS X.
11. Repeat steps 1–8. -
Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
My imessage is not working at all is because when I send a message to my friend the bar of sending complete but it doesn't send what I can do please heeeeeelpppp !!!!!
2-3 days ago, iMessage just stopped working on all my devices (2 iPads; 1 iPhone; 1 Mac), and it hasn't come back since. iPhone waiting for activation, the rest just don't send the messages.
FaceTime and iCloud work fine.
I really hope this is resolved soon, because I rely heavily on iMessage for the majority of my communications, and I need it back ASAP as I'm on holiday and out of my home country. -
Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?
Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have. -
My imessage is not working. I went into settings, then messages, and it says my imessage activation is unsuccessful. What do I do to get imessage working again. When I turn it on it sends imessae through my email not my phone number
It is starting to get a common problem (iMessage), try doing this:
http://www.imore.com/having-trouble-imessage-or-facetime-ios-7-heres-how-fix-it
Good Luck -
The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!
Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH. -
I Switched to an android phone but Im not getting messages from people with I phones because of the I messages. I have already turned off my I messages on my old phone.
http://support.apple.com/kb/ts5185
-
I have iPad 4th gen but my iMessage is not working
I have iPad 4th gen I was trying to send message but it's not working
It says not delivered and number is on redhttp://support.apple.com/kb/TS1827
-
IMessage is not working in IOS 7 , Any workaround
iMessage is not working in IOS 7 , Any workaround
Yap, sad but true...
The most annoying problem, besides iMessage, is the keyboard, it's horrible on my iPhone 4 in Safari. Some on some formulars the keyboard is so **** slow that I had to stop typing after 2nd word.
But I could fix the iMessage Problem, first turn off iMsg, then you have to backup your Phone on your PC/Mac in iTunes, turn off auto sync when done and pull the phone off. Then go to the Phone settings and reset everything, then choose "set up as new device".
When done go to settings and activate iMsg and wait for activation, it will work! After you're done plug the phone back to your PC/Mac and restore from the Backup you made before. Now go to phone settings again and check if iMsg is on, if not (as it was in my case), turn it on and activate again, it will work now!!!
Attention: Apps and Music have to be resynced or downloaded after this, they are NOT part of the Backup.
This was what Apple tech. support told me to do and it worked fine.
Greets -
Imessage is not working for one person
My imessage is not working for one person.
Its been like this for about 2 days
I have an iphone 5
imessage is on
both phones reset network settings,deleted and remade contact, etc.Does the other person have iMessage on, too? Is the specific phone number/address you are trying to reach them at show up for them in Settings > Messages > Send & Receive?
Maybe you are looking for
-
Problem with bridge and getting internet on android
My ISP uses a modem/router that's mounted outside of my house. From there it runs into my Linksys E1200. Since it's a router connected to a router I have to use it as an access point. I don't have any cable connected to the internet port in other wor
-
How to find multiple transport requests for one object
Hi all, Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution. I need to develop a report , which will takes a single Task n
-
Adding a record in a table from a workflow process
Hi all, I need to add a recod in a table using a workflow. Here the scenario: A user add a record into table A, when done MDM trigger the workflow in Visio. The workflow has to add a record in table B coping some values of table A. Thank in advance f
-
Recently I t realized that my keyboard has started to stick and jump around a page as I type. It will randomly jump up to a different section of the text and start writing there, or just highlight a portion of text, which then causes me to erase it a
-
Making Customer Credit Limit (FD32) a sensitive field
I am wondering if it is possible to mark customer credit limit (field KNKK-KLIMK) which you enter by using T-Code FD32 a sensitive field for dual control? If so, I request for detailed steps as I have been trying to do so but could not succeed. Pleas