IMessage/text photos constant loading/flickering while trying to view them since updating to IOS7
Since updating to IOS7 any sent or received photos constantly try and update making it nearly impossible to see the photo.
Has anyone else had this issue or is this just a bug that hasn't been fixed yet?
Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.
Similar Messages
-
Apps closing while trying to open them after update to iOS 6
My phone apps have been starting to open when I select them but immediately close no errors they just close. Safari did this while looking up websites and several other apps started doing it today. Sometimes after several attempts of opening one of the apps it will stay open and seem to be ok. If you double tap the home button and close the app it then will have an issue opening again for several attempts. I have had no problems with this phone and was so happy to have dumped droid but now after the update this issue is getting annoying. I have shut down and rebooted phone I removed and reloaded one app and it seems better but still acting strange. I am thinking about going back to iOS 5.
Actually DIESEL they do force you to update. my wife has not update hers yet to ios6 and none of the apps work at full tilt anymore because they are all updated for ios 6....Apple is now making you either update(and ruin your iphone 4s) or buy the new iphone 5(which i doubt will have any of the problems people with iphone 4s are having).
Since updating my 4s i have lost signal, data has been very low at best. i can not access any apps or they open up and do not refresh. I use to have 4bars at my work and now i have 1. -
My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?
Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.
-
ORA-00600: internal error code While trying to view cube
While trying to view cube, i encounter the following error
oracle.dss.dataSource.common.QueryRuntimeException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.dss.dataSource.common.OLAPException: BIB-9509 Oracle OLAP did not create cursor.
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-00600: internal error code, arguments: [xsLMapCrtAddPhrase01], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.GENDEFINITIONMANAGERINTERFACE", line 42
ORA-06512: at line 1
at oracle.dss.dataSource.common.QueryDataDirector.addDataDirectorListener(QueryDataDirector.java:795)
at oracle.dss.dataView.ModelAdapter.setDataDirector(ModelAdapter.java:173)
at oracle.dss.crosstab.CrosstabModelAdapter.setDataSource(CrosstabModelAdapter.java:54)
at oracle.dss.dataView.Dataview.setDataSource(Dataview.java:396)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.getCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showCrosstab(Unknown Source)
at oracle.olap.awm.dataobject.dialog.olapi.UBiBeanUtil.showData(Unknown Source)
at oracle.olap.awm.navigator.node.olapi.UCubeNode.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
This is with a simple cube with only one dimension. i had created the same cube earlier with 10 dimensions but same error occurred. i felt it had to do with my setup of the cube. I have recreated the cube a couple of times with different names but same error exists. interestingly all dimensions are viewable after maintenance.
I am begining to doubt the efficacy of AWM + oracle OLAP in use for a production environment. i have been at this for quite some time but no solution yet. please i would appreciate anyhelpHave you ever had any cube working in this environment? yes. i had created multiple versions of the same cube with fewer dimensions. I had created a cube (USAGE) with 5 dimensions, it worked. I later created same cube with 10 dimensions, that was the Genesis of the error. i had exported the eif file, deleted the awm, reimpored the awm, same errors. recreated the cube same error. i even tried recreating the cube wih one dimension but the same error persists.
database is Release 11.1.0.7.0
AWM standalone client :awm11.1.0.7.0B -
An error occurred: An error occurred while trying to view the document
Now my partner meet a trouble about opendocument API.
There are 2 servers : one is partner’s web server ,which partner’s application run in; other is BO server.
The above servers are running on different servers.
There is a web page A , which is running in partner’s web server.
Page A includes a iframe, whose source is BO documents running in BO server via opendocument API.
In Chrome, the page A work.
But in IE, the page A don’t work, then get the error “An error occurred: An error occurred while trying to view the document”
You can see error.jpg
I have written the sample page to re-produce this error.
You can change 1.txt to 1.jsp
Welcome your advice.Hi,
if it works in Chrome then this Problem is related to IE.
Maybe the URL is to long? IE can "only" handle 2048 Characters.
Regards
-Seb. -
IMessage is not working on my iPad since updating to ios7.0.6
iMessage is not working on my iPad since updating to ios7.0.6
It worked well before doing the latest update.
iMessage on My iPhone 4 works fine after doing the same update.
Have done all the usual things plugging into computer, complete shut down and reboot, nothing has worked.
It keeps asking for password for Apple ID, I know I am entering the correct ID, check network is also being displayed.
Nothing wrong with my network either, other iPads and iPhones are working fine on the same network.
Would like this fixed ASAP.
ThanksUsing FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Since updating to ios7 my ipad freezes, randomly zooms in and out, black pages that take forever to load and battery charge doesn't last very long. It's very frustrating, is there anything I can do it seems to have a mind of its own
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
since updating to IOS7 my 4s has been giving trouble, not getting calls, Imessages wont go, not receiving messages. What can i do??
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
Since updating to ios7 none of my photos are their normal size.
Since updating to ios7 none of my photos are their normal size.
Cannot move and scale for background photos.
Find nothing in general settings regarding this!
Please help.
iPhone 5 hardwareYeah, it's BS!!!
-
Since updating to IOS7.0.3 can not seem to get more signal on my iphone 5 with my manager H3G ita what I have to do I also tried replacing sim with no effect, also on ipad 2
So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes. -
Lost All My Photos! "Error occurred while trying to save .."
Hi. I'm in total panic mode right now as it appears I have lost all my photos.
I did a quick search here and came across a couple of threads, but I'm not sure if the info contained in them is going to help me.
I was using iPhoto and double clicked on a photo to enlarge it to show it to a friend and then I got the following message: "An error has occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space & that iPhoto is able to access the iPhoto Library". After this, all my photos in all the events & albums disappeared ... no status bar indicating anything was being processed ... nothing.
I have my iPhoto Library on my 1TB Western Digital Hard Drive and the drive kept whirring as if processing something (this sound is common but it just kept going). I quit iPhoto, put the iMac to sleep & a minute later woke it up. The HD started whirring again & I opened up iPhoto ... still no photos. I dragged the external HD to the trash to eject it & unplugged it. I then re-connected it & still nothing. I have two "my book" icons in the left panel when I open up my Mac HD and one of them I can't get rid of as it says the volume can't be found. I'm guessing this is from when I tried to eject the HD. I am going to try re-starting my Mac. I also right clicked on the iPhoto icon to check the properties & even though I have no photos, it spent a couple of minutes (like it usually does) trying to calculate the size of the library ... so I'm hoping that the photos are somewhere.
I have 16gb left on my iMac HD & 476gb on the external HD. I have no clue what happened and I had over 160gb in my iPhoto Library.
Where should I look to try and find the photos if they have just been hidden (I hope) or am I totally out of luck? I have backups of some of the photos but not everything ...
If anyone can offer some suggestions I'd be very grateful.
Thanks for your time.
Take care,
BrentBrent
You’re having two problems there, I think. One is with the disk. You’re not going anywhere with the other until you can get that to mount.
Assuming you can, it sounds like the database has been damaged:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD -
Error while trying to view web interface in browser
Hello all,
I'm getting the following error message while trying to preview my BPS web interface in the BW system as well as my web browser (IE).
Note
The termination occurred in system DBW with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:kblep_DBW_00-v:0-s:403-r:Forbidden
I have created this web interface using the wizard and while checking it the BW system doesn't report any errors or warnings. The same works properly in Excel. I'll be very grateful if somebody can tell me how to sort it out. Thanks a lot.
Regards,
SumitHi,
Go to the transaction "sicf" and check that the following components are active:
-default_host ->sap ->public->bsp
-default_host ->sap ->public->bsp->sap->system
-default_host ->sap ->public->bsp->sap->htmlb
-default_host ->sap ->public->bsp->sap->public->bc
-default_host ->sap ->public->bc
-default_host ->sap ->public->bc->ur
-default_host ->sap ->bc->bsp->sap->system
-default_host ->sap ->bc->bsp->sap->public->bc
(To make this easier you can select on a higher node to activate all lower nodes as well). This should resolve your error.
regards,
Martin -
Error while trying to view the details table from Show/Hide icon
What we are having is two tables, Outer and Inner, having Outer VO and Inner VO,outer VO is linked with inner VO. Now when I am trying to view the inner table
through Show/Hide icon to see the details of the table ,I am getting an error like ...
The record with primary key values {2280} could not be found in view object MisForecastHeadOfiiceAM.InnerTableVO_OuterInnerVL_InnerTableVO.
I want to know how this error can be resolvedHi Abdul,
We are not getting error while searching. As said earlier
While search for the first time > We could see proper results in out table and Even show/hide is working fine and display correct data in Inner table
When searching for the second time with different criteria > We could see proper results in outer table and on clicking show/hide (to view inner table data), we are getting error.
The record with primary key values {2280} could not be found in view object AM.ViewLinkVL_InnerTableVO
From the error message, we found that its trying to get the row (of inner table) pertaining to first search results and not for the outer table row in context to second search results. -
Apple ID keeps timing out while trying to sign in after updating to iOS5
I updated my iPhone 4 to iOS5 and now while trying to sign in using my apple ID (on the phone) I keep getting an error message saying "Could Not Sign In : The request timed out."
Same thing is happening here, I can't get past the startup wizard, I had to skip the step - I don't know whether that will screw up my setup or not.
-
Stack dump while trying to view the JNDI Tree on a managed server.
Hi,
We are running WLI 9.2.3.
I have a problem when trying to view the managed servers JNDI Tree via the Admin console. The admin servers JNDI tree appears to be fine, but trying to view the 1st managed servers JNDI Tree via the admin console keeps producing a stack dump.
Does anyone know why this would be? Is it a security issue, judging by the classes below:
####<Jul 14, 2010 1:31:29 PM BST> <Warning> <RMI> <sofatd2b> <tgri02_rsk_ms11> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel
<> <> <1279110689890> <BEA-080004> <An error was thrown by rmi server: weblogic.jndi.internal.RootNamingNode.listBindings(Ljava.lang.String;Ljava.util.Hashtable;)java.lang.StackOverflowError.
java.lang.StackOverflowError
at $Proxy5.isAccessAllowed(Unknown Source)
at com.bea.common.security.internal.service.AccessDecisionServiceImpl.isAccessAllowed(AccessDecisionServiceImpl.java:105)
at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:61)
at $Proxy11.isAccessAllowed(Unknown Source)
at com.bea.common.security.internal.service.AuthorizationServiceImpl.isAccessAllowed(AuthorizationServiceImpl.java:81)
at sun.reflect.GeneratedMethodAccessor201.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:61)
at $Proxy13.isAccessAllowed(Unknown Source)
at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:461)
at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:524)
at weblogic.jndi.internal.ServerNamingNode.checkPermission(ServerNamingNode.java:414)
at weblogic.jndi.internal.ServerNamingNode.checkLookup(ServerNamingNode.java:394)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:169)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:196)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:95)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:348)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:196)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:95)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:348)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:196)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:95)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:348)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:196)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:95)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:348)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:196)
at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:95)
at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:348)
at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:269)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
at javax.naming.InitialContext.lookup(InitialContext.java:351)Hi,
if it works in Chrome then this Problem is related to IE.
Maybe the URL is to long? IE can "only" handle 2048 Characters.
Regards
-Seb.
Maybe you are looking for
-
ok, so i set up an email account on my ipod so i don't have to go onto my pc to access emails from that account. but recently i needed to make a new email for use with other things and want to use the new email rather than the old one. how do i erase
-
Huge MacBook Pro Problem - Please Help!
Okay I have so many problems I don't even know where to begin. I bought my 13" MacBook Pro in August of 2009. Two days after I got it, it completely stopped working. I took it to an Apple authorized repair shop, who told me I had spilled iced tea all
-
Downgrade Windows 8 ent to windows 8.1 pro
(I asked this in the general windows forum but this may be a more appropriate place) I have perpetual developer licences for Windows 8 under a now discontinued msdn subscription. My main box has Windows 8 ent (MAK license). I also have (as part of th
-
Why does the Safari iOS7 Browser truncate Options in a Select control?
Sir or Madam ; I'm working on a website tailored to mobile device usage, and the SELECT control widget in the Safari from iOs7.0 seems to be really problematic. Previous versions of the software would wrap the text around if it exceeded the width def
-
"burn disc" button is missing in iTunes preferences
I upgraded to 6.0.1 a few months back and haven't had time to actually burn anything (busy with life). Today, I wanted to burn a CD and went to iTunes preferences, and the "burn disk" button with all the options for MP3 and CD is missing. I went to H