IMessage: Video Message BAD Quality?

Hey guys, I just updated my iPhone 4 with iOS 5. I've been looking forward to use iMessage because video message is my primary way of communicating with my girlfriend (no FaceTime over 3G). In iOS 4, I used a 3rd party App called Kakaotalk but it can only send 10 seconds of video message.
So I tried sending a video message through iMessage and I can send it longer than 10 seconds, which is great, but the receiver gets a bad quality of the video. If you are the sender and you play the video on iMessage, the quality is the same as the Camera app though.
Anybody have the same problem? If so, will Apple fix this?

Bring
Up
My
Post

Similar Messages

Full screen video player - bad quality

Hello, I got a new thinkpad W530 and I am having this really annoying problem when I play videos in full screen (Netflix, HBOgo, SkyGo, etc...).
This is an example of it. I have decided to upload this picture because it is the easiest way to show the problem.
As you can see, I am having jagged edges all over the place. During a movie it is really really annoying. I never had this problem with my previous mac and I don't have any problem with my ipad.
I am running windows 7. My graphic card is the Nvidia quadro k1000.
Can you guys help me?

Update your video drivers, update your Flash player.
Also make sure your browser/Flash is running on the integrated GPU rather than the discrete.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Getting message "Bad quality received from network module". Then FP1600 no longer communicates, cant ping it. When

it is power cycled it works again. We have another FP1600 on same network with no problem. Ethernet drop is 230 feet. Part# is 185690E-01, firmware 4.11. I have swapped it with a spare unit we have of the same part number, 185690E-01 and firmware release.The FP1600 has been swapped with a spare we have, the network cable has been replaced, the FP-TC-120 has been swapped with a spare. The IP address has been changed.

it is power cycled it works again. We have another FP1600 on same network with no problem. Ethernet drop is 230 feet. Part# is 185690E-01, firmware 4.11. I have swapped it with a spare unit we have of the same part number, 185690E-01 and firmware release.Mike,
Thank you for using the discussion forums. If possible, please generate a phone support request at ni.com/ask. One of our engineers will be happy to help you resolve this particular issue.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

Bad quality colorbust

I have a IMAQ 1408 and a NTSC camera (alm-2451g wireless microcamera,
like this: http://www.prymesecurity.com/2451g.htm ) and i can't snap
Still-color images because i get this acquisition error message:
bad quality colorbust.
I know that colorbust is color synchronization signal: someone can
tell me why IMAQ 1408 can't find it?
With other acquisition cards i can capture color videos and images
easy, but with IMAQ 1408 i can just snap and grab in monochromatic
mode (selecting disabled in "still color" combo).

Hello.
With other acquisition cards i can capture color videos and images
easy, but with IMAQ 1408 i can just snap and grab in monochromatic
mode (selecting disabled in "still color" combo)
This is a little surprising, as the error message that you get is almost always related to a non-color camera being connected to a PCI-1408 (or 1409) in still-color mode. This error comes when the signal is not as expected. Based on what you have mentioned, I am guessing this is a composite color camera. There are only a few remaining things to check/change:
1. Be sure composite is selected in the still-color mode.
2. Be sure that NTSC is selected as the camera (right-click on channel and select Camera_NTSC).
3. Go to the property page for the channel and ve
rify that the reference voltages and other settings are according to the specs of the camera.
I hope this helps lead to the answer!
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

Imessage videos being received in poor quality and pixelated

Hi, my imessage videos (aprox 2 minutes long) suddenly are being received by my parents in very bad quality and pixelated. I believe the size of the file being received is a lot smaller. No problems before recent updates on both my ipad air and parents ipad retina display (4). Any suggestions appreciated.

MLK88. Is it the base that is cracking like this??? REO “As a frequent contributor to the HP Consumer Support Forums, HP provides me access to the “”HP Split 13 x2 13r010dx i3-4012Y “ at no charge so I may better respond to the questions raised on the Forum.”

ACNS 5.5 / Troubleshooting bad quality VIDEO (MMS-over-http)

Hello community,
For an unexplanable reason I have to deal with an ACNS problem which is not my domain at all ! ACNS 5.5.15 is on a WAE-512-K9 working with CDM.
Please can someone advice me on how to start the basic troubleshooting steps on the following issue :
============================
- Users in Sydney are complaining of bad quality when they watch a video from an Intranet server in Frankfurt.
Video flow has bad quality (buffering ..) and/or stops before the end of the video.
- Users browsers are configured to use the WAE as local proxy on ports 3129 (.pac file). Requested Video on the intranet is in the Windows Media format and flows are MMS-over-http.
- No multicast distribution is used, neither content pre-positioning.
============================
We did a wireshark trace on the user PC watching a video which ends up unexpectidely with error code 500 => We follow the TCP stream, Time/Sequence graph is linear until ACNS sent [PSH,ACK] tcp flags to the user PC. Then PC answers with [FIN, ACK] etc...and the stream ends.
I have checked the show-tech (i have attached some commands from the sh tech) especially TCP statistics but I do not if the values are normal or not.
I am thinkink to open a TAC case but before contacting Cisco I prefer to try some basic tests if they can help.
Any recommendation on how to start a troubleshoot or any advice would be gretly appreciated.
Thanks.
Karim

Hi Defcom,
Thanks for the quick reply. I have tried changing and resetting the bandwidth limits at both ends last week at both ends but no joy!
I am going to try the solution on the Gerry's link above later but have to wait for my brother to be free as he has an airport as well(had a baby yesterday (hence why we are setting this up)).
Dave

Bad quality audio and video with Skype

Hi,
while making a Skype video call via WiFi using my Z1 Compact my conversion partner complained about the bad audio (very low) and video (poor resolution) quality. I than changed to IPhone 4s from my wife and my conversion partner said the quality was much better.
As I was using the same network the problem cannot lay on the connection.
Is there a known sw bug using Skype on the Z1 Compact?
My skype version: 4.9.0.45564.

If you only have these issues regarding video and audio quality when using Skype then you would be best to speak with the developer of that application as they would keep their own records of such issues.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Bad quality after sharing video

The quality of my video is very bad after sharing it (I have saved the project as MPEG2 file)
Especially the darker parts of the video are bad, in the preview screen in adobe premiere elements 7 I can see the faces of all people in these parts, while I can only see very dark faces after sharing. Does anyone know how to solve this problem?
Thanks!
Jorien

I have a DV camcorder and I used a firewire cable to get it into my computer. In the assets I read DV PAL 25.00 frames/sec , don't know what information I need to give you?
I tried to share it as MPEG2-NTSC standard, and MPEG2-PAL standard.
(I view the shared video on the same computer)
Hope you can help me (sorry, am not really into video editing yet so I don't know so much about it).
Grtz, Jorien

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just power) . I lost all sound at this point. Then restarted again with a hard reset.
Hope that fixes your iPad v2
Mo

Premiere Pro CS6 - Video Output (GPU) bad quality...

Hi,
I have a question about Adobe Premiere Pro CS6...
I have installed the Trial-Version and use a BM Intensity Pro to output Full-HD 1080i (50, Interlace) trough HDMI Video-Output...
The Video-Output works correctly, but if I enable the "GPU"-Acceleration (CUDA), and scale or transform a Video (for example a 3D-Transformation) the Quality of the transforming is very bad! (jerky, not "smooth", Interlace-Lines etc...)
If I deactivate the GPU-Acceleration (Software only Mode), everything is smooth and looks good!
Also if I render the Timeline, all tranformations are also smooth, only the Realtime GPU Rendering looks very bad....
What can I do?

Hi :-)
I have tested it now with another Grafikcard!
And it is exactly the same problem
I have found out, that the GPU makes a delay, after a few seconds the Transformation looks smooth/bicubic!
But on relatime-Playback its bad...
My English isnt very good, so I have some problems to describe what I mean...
If you stop the playback, it takes 2 Sekonds and then the image looks good!
But dureing the playback its very bad quality, false Interlace-Lines etc...
here are two screenshots:

I get bad quality like blurry videos and photos on internet

Whenever i go on the internet and see videos or photos on any site it shows them in a bad quality and when i asked around other people they said the video looked just fine and it was only me. I dont know how to fix it. Anyone Help?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support?

Bad Quality: Shared videos

Is anyone else experiencing a very pixelated version of there videos after being sent through MMS? My sister sent me a video and the quality was beyond horrible. I sent her one of mine and when I watched the "sent version" and the quality decreased by ~30%. Sadness. (I'm hoping Palm reads these things. I'm new to this so I can only hope.)

Open one of the videos from outside iPhoto with Quicktime Player and see if it's as good as before. Since iPhoto uses Quicktime for it's rendering and playing it shouldn't be different, inside or out.
If it is different inquire in the Quicktime discussions as there will some experts there that can help you.
OT

Why can you not leave a video message with Facetime?

Would love to be able to leave a video message for the person I'm calling on Facetime if they can't answer. Is this possible?

You can send email to anyone. Messaging (I'm assuming this is what you are talking about--the other party MUST have IOS5 on an Apple device) is different. Think of it as an add on or a plus. It means you can message with someone without using your texting allowance on phone for example. Face time is also Apple to Apple because its an add on. Otherwise you can use Skype for instance--and I don't quite understand what you mean about using it for email.
Email is totally usable for any email address. I've been emailing all over the world with Ipad for a year and 3/4.--same as emailing from any computer or phone. I just think you are misunderstanding face to face and Imessaging as opposed to regular email.

Bad quality preview via HDMI

Hello together!
After searching for days in the www and on this board I hope somebody here knows a solution for this problem:
Im looking for a quality solution to preview the program monitor as a full screen picture on my Panasonic HD-Ready TV. I got it running, but there is a really strange quality problem:
When I just use the TV as a second Windows display and I move the program monitor onto it (no full screen but at 100% display level) the preview looks nice but I can not see the complete picture, because 1280x720 plus the program monitor itself is too big for my screen When I change the display size of the program monitor to something lower than 100% the scaling looks very bad higher than 100% no problem with scaling.
So this is my problem:
When I switch it in the playback settings to playback on extern monitor to view it full screen there is a problem. Diagonal lines get a bad looking aliasing. My idea was that CS3 is scaling something (and this does the program not as good as I tried the preview with trailversions of Edius5 or Vegas8c). Just at 100% CS3 preview looks nice (the same when I just watch the program monitor on the Notebook display).
My Nvidia Card is set to HDMI 720p output. The TV says it is a 720p signal what is coming form my HDMI cable, and last but not least my footage is also filmed in 720p60 (Sony Ex1) and I used the 720p60 EX1 setting in CS3.
So again, when I just watch these clips for example with the Sony clip browser on my TV (also form this Notebook via the same HDMI output) the diagonal lines start not to flicker and are displayed very sharp. So it cant be the graphic card, the TV or the footage at my knowledge.
So why does CS3 scale there something in the full screen preview although from input to output everything is in 720p? Furthermore why is the scale in such a bad quality (Edius does this perfect so maybe I have just a wrong setting somewhere in my CS3 settings). Is CS3 not using the graphic card for scaling?
My system:
Asus V1S Notebook
NVidia GeForce 8600M GT 512MB
Duo T7500
2GB Ram
Windows Vista
Hope somebody here is able to find a solution for this problem, because I dont want to buy an extra video board (like Axio) for it.
Best wishes,
Swen

But often with these cards, you can not work in the CS3 normal nativ settings for Ex1 footage.
At my knowldge when I would like to open a project which with a Blackmagic Card for example and I like to finish the editing on an other computer without that card you'll have a problem (because BM or other cards allway use their own presett window-right?). So you lose a lot of flexibilty by using a card or a third party codec like this. So it's not so future proof as just to work with the NLE Software itself.
I see this now with my old Premiere 6.5 Projects. I used a Canopus Raptor RT2 for this with the Canopus codec. That worked very very well, but now I can't use this project anylonger on a new editing CS3 station, because it doens't support these Canopus transitions and codecs. Also the only Windows Notebook based output solution is the MotuV4 box... not a very cost effectiv solution for a preview.
So again. There must be a sloution to get the problem with the diagonal lines fixed. Why does CS3 scale the preview when 720p footage should be displayed over a 720p output onto a 720p Monitor? No need for scaling? Or am I wrong with this?

IMessage: Video Message BAD Quality?

Similar Messages

Maybe you are looking for