IMessage will send but not receive messages.

Just updated to iOS7, signed in to iMessage with correct Apple ID but the account won't receive messages. It will send messages OK but if you try and send from another device the contact isn't blue (iMessage contact).
FaceTime works OK with same Apple ID.
Help!

    HGD9832,
I apologize for the delay, but thank you for keeping us posted. Being able to send and receive messages is important. I'm glad everything was resolved.
AdaS_VZW
Follow us on Twitter at @VZWSupport 

Similar Messages

  • IPhone5 will send but not receive Text messages

    IPhone5 will send but not receive Text messages.  Specifically, I can send my grown son text messages, but he can not reply to them, nor can he send me new texts. He and I are both on Verizon, and he has a Droid phone.  His texts can be recieved by his mother, who can forward them successfully to me.  When I initally received the phone (Dec 2012) I could receive and send texts with my son with no difficulty. The trouble began (as near as I can tell) when my phone was upgraded to 6.1.1.  This is a significant problem and I would like it resolved as soon as possible.

        Scouter, let's get you reconnected with your son, via text message. Make sure that your text messaging feature is enabled in Settings>Messaging:
    enable iMessage ON
    enable "Send as SMS" to ON
    MMS Messaging ON
    You will also need to reset the network connections in:
    Settings>General>Reset>Reset Network
    Finally, power cycle your phone off/on and try to send your son a text message. Keep us posted. We're here to help you.
    LasinaH_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • My MacBook Air will send but not receive Airdrops?

    Does anyone know why my MacBook Air running OS X 10.9.4 will send, but not receive, AirDrop files?  I've tried to see if there are any security settings blocking receiving but have been unable to find anything.  Thank you!

    If the firewall is on, turn it off in the Security & Privacy preference pane. Otherwise see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • OS X 10.4.11 will send but not receive faxes on Power Mac G4 MDD

    OS X 10.4.11 will send but not receive faxes on my Power Mac G4 MDD. Perhaps I should remove the relevant .plist preference file(s). But which one(s) is it /are they? Or is there something else I should do?

    Thank you for your reply, BDAqua. I have set the fax feature to answer after 3 rings, but the phone rings only once when someone is trying to send a fax. The phone icon in the menu bar changes to "ringing ..." but nothing more happens. The phone line on which I receive faxes is dedicated to that use. I phoned in to its number earlier today from another phone. I heard it ring once and then it went to the busy signal. I then disconnected the fax phone line from its wall jack, connected a phone to the jack, and phoned in to it. The phone now rang and rang as it should. So this confirms the assumption that the fault is in the computer, presumably in the Print & Fax software. I should also mention that I don't find com.apple.print.FaxPrefs.plist in /Library/Preferences.

  • HP Officejet 4315v All-in-One will send but not receive faxes

    I can send faxes on my HP Officejet 4315v All-in-One printer, but cannot receive them.  Please help. 

    Hi @exotica7 
    I would like to help you with the fax issue you are experiencing. The following documents address fax issues that may arise. Although you can send but not receive,  I suggest starting with the first document. It will guide you through the necessary steps to troubleshoot receiving issues.
    Cannot Send or Receive Faxes
    Troubleshooting 'Phone Off Hook' Front Panel Messages
    'Phone Off Hook' Status Message Displays on the Control Panel
    Interpreting Error Codes in Fax Communication Error or Fax History Reports
    Testing Your HP Fax Machine with the HP Fax Test Service
    Incoming Faxes Print Small or Print on More than One Page, or a Blank Page Ejects Between Printed Fa...
    Using the Fax Diagnostics Test
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My pantech hotshot will send but not receive text messages

    I have a Pantech Hotshot that was working fine then all of the sudden it quit receiving text messages but it will still send them OK. I have tried pulling the battery and calling *228 but neither of them worked.  Any suggestions?

    Your phone should certainly send/receive messages, copafan. How long have you had this Hotshot? Did you get it brand new? Are you the Account Owner? It sounds like there could be some settings/provisioning that need to be adjusted on your account. If you're the Account Owner, please log into My Verizon and make sure you have the text message feature, and there are no blocks. Otherwise, you can send me a Direct Message and I will be able to better assist you.   Thank you, VanessaS_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Yahoo IM - Can Send But Not Receive Messages

    Any help is greatly appreciated... I've tried everything I can think of!

    Hello,
    I have the same problem, but not with all users, only with one user.
    This one user can send me messages, but my messages this user never receive...
    Other chat partner can read all my messages.
    Maybe its because of the Desktop Version of yahoo messenger? I dont have any idea at the moment. Anywhere have an idea? :-)
    thanks

  • Flex client can SEND but not RECEIVE messages from BlazeDS

    Hi there,
    I built a sample chat application that should be able to send/receive messages from a JMS topic. However, I am only able to SEND messages, I am not able to receive them. Any advice/suggestions would be GREATLY appreciated as I am seriously stuck.
    My setup:
    - BlazeDS Turnkey
    - FioranoMQ JMS provider on remote machine
    What I know:
    - My MXML code is good. I am able to use the exact same code and get both subscribing and publishing working when I use 'ActiveMQ' instead of 'FioranoMQ' as my JMS provider
    - FioranoMQ JMS provider is working fine, my test Java clients can both subscribe and publish to the same JMS topic that the Flex app uses
    - Publishing from my Flex app is working because my Java client is able to receive messages from the same topic whenever Flex messages are sent to FioranoMQ
    - My Flex app is supposedly 'subscribed' to and 'connected' to the correct (streaming-amf) channel. I know this because the MXML 'Consumer' object's "subscribed" and "connected" properties are true and no fault events appear whenever I issue "consumer.subscribe()" in my Flex app.
    Sample debug console log:
    (I tried sending 8 JMS messages from my Java client code to the 'mytopic' topic that my Flex app is using. The end of the log shows that SOMETHING is happening after sending these messages, but notice the actual 'message' is never streamed even in the log!)
    [BlazeDS] 01/27/2009 FlexSession created with id '72D3E6EED1364AD328F342F1AF59FF
    69' for an Http-based client connection.
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Deserializing AMF/HTTP request
    Version: 3
    (Message #0 targetURI=null, responseURI=/1)
    (Array #0)
    [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
    operation = 5
    correlationId = ""
    clientId = null
    timestamp = 0
    body = (Object #1)
    headers = (Object #2)
    DSMessagingVersion = 1
    DSId = "nil"
    timeToLive = 0
    destination = ""
    messageId = "AECE3D84-789C-29B7-3413-197C7A48A7D2"
    [BlazeDS] 01/27/2009 Serializing AMF/HTTP response
    Version: 3
    (Message #0 targetURI=/1/onResult, responseURI=)
    (Externalizable Object #0 'DSK')
    (Object #1)
    DSMessagingVersion = 1.0
    DSId = "ED38E721-2609-CF34-62A2-28D918C4BB8F"
    1.233083202182E12
    (Byte Array #2, Length 16)
    (Byte Array #3, Length 16)
    (Byte Array #4, Length 16)
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Endpoint with id 'flextest-streaming-amf' is streaming mess
    age: Flex Message (flex.messaging.messages.AcknowledgeMessage)
    clientId = null
    correlationId = open
    destination = null
    messageId = ED38E793-E519-95BB-3E4C-1A7E8D716951
    timestamp = 1233083202229
    timeToLive = 0
    body = ED38E793-E50A-2500-E2F5-7525401FD8CE
    [BlazeDS] 01/27/2009 Number of streaming clients for FlexSession with id '72D3E6
    EED1364AD328F342F1AF59FF69' is 1.
    [BlazeDS] 01/27/2009 Number of streaming clients for endpoint with id 'flextest-
    streaming-amf' is 1.
    [BlazeDS] 01/27/2009 Channel endpoint flextest-streaming-amf received request.
    [BlazeDS] 01/27/2009 Deserializing AMF/HTTP request
    Version: 3
    (Message #0 targetURI=null, responseURI=/2)
    (Array #0)
    [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
    operation = 0
    correlationId = ""
    clientId = null
    timestamp = 0
    body = (Object #1)
    headers = (Object #2)
    DSEndpoint = "flextest-streaming-amf"
    DSId = "ED38E721-2609-CF34-62A2-28D918C4BB8F"
    timeToLive = 0
    destination = "flextest-message-destination"
    messageId = "5ED8AAA4-BDA8-C8E4-D85B-197C7AC5E83A"
    [BlazeDS] 01/27/2009 JMS consumer for JMS destination 'mytopic' is starting.
    [BlazeDS] 01/27/2009 JMS consumer for JMS destination 'mytopic' is

    Hi Alex, thanks for your advice. I tried reading the client-side logs, but it just physically shows what I was saying earlier - that the consumer is connected and subscribed, but no messages are coming through to it.
    I've attached the output of the 'flashlog.txt' file. For the particular session shown, the flex application was sent 8 JMS messages, but as you can see nothing got through. I put a 'trace' message in the message handler function (for my consumer object), but it never gets called.
    'E2513351-75DA-0837-7263-3807B91D9630' consumer set destination to 'flextest-message-destination'.
    '7D784A40-DBBB-71F1-4029-3807B91D45E3' producer set destination to 'flextest-message-destination'.
    'consumer' consumer subscribe.
    'flextest-streaming-amf' channel endpoint set to http://localhost:8400/FLEXTEST/msgbroker/streaming-amf
    'flextest-streaming-amf' channel settings are:
    'flextest-streaming-amf' pinging endpoint.
    'flextest-streaming-amf' channel is connected.
    'flextest-streaming-amf' channel sending message:
    (mx.messaging.messages::CommandMessage)
      body=(Object)#0
      clientId=(null)
      correlationId=""
      destination="flextest-message-destination"
      headers=(Object)#0
      messageId="8A592005-3C8A-4C6C-B074-380857710C00"
      operation="subscribe"
      timeToLive=0
      timestamp=0
    'consumer' consumer connected.
    'consumer' consumer acknowledge for subscribe. Client id '37CC5DED-A019-7110-3C89-A9926835103E' new timestamp 1233595684954
    'consumer' consumer acknowledge of '8A592005-3C8A-4C6C-B074-380857710C00'.
    Seems to me there can only be two explanations: either my BlazeDS configuration is incorrect (which is unlikely given that everything works if I use a ActiveMQ as my JMS provider with only trivial changes to my configuration), or there is some bug within BlazeDS that is preventing it from working properly with FioranoMQ. What do you think?

  • Account will send but not receive Facetime calls

    I have an old iMac running Snow Leopard and a New iPad.  I have an Apple account for my wife and one for myself.  I can recieve Facetime calls on my wife's account when I send it from my account, but I cannot receive messages on my account when I send it from my wife's account.  It says I am "not available". 
    It doesn't make a difference which device we use to send the call the same problem persists, so it seems to be an account problem and not a hardware problem.
    Any suggestions?

    Contact your carrier.

  • Email will send but not receive

    FFirst it was saying cannot connect to server but now nothing. It will send email. It not receive. Ideas?

    Hello Amschoe,
    The article linked below details a number of useful troubleshooting steps that can help get your account working with Mail on your iPad.
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/TS3899
    Cheers,
    Allen

  • IPhone4 will send but not receive texts or phone calls

    My iPhone4 just stopped receiving texts or phone calls??? I can call out and send texts, but it will not receive anything?? I have gone through troubleshooting and reseting network and all that, still nothing?? Any ideas?

    Contact your carrier.

  • HT3529 I can send but not receiving messages

    People have been receiving my messages but I am not receiving theirs?????

    We have MX records pointing to our domain that we use for email, but I do not think to our Exch2013 Server. We use them now with Exchange 2003. When I do NSLookup for our domain name it returns (2) MX records from our email host that I would expect,
    as they have always been there since the exch2003 box.
     NSLookup does not return mail.domainname.com on the list of MX records.  If I ping mail.domainname.com, it returns the public static IP address of our exchange server given to us by our ISP...but is that because I added that A Record today?
    I do not understand your statement... "To receive mail you must post your domain in the form of an MX record". Maybe there is something I need to add at my web host (Network Solutions)?? Do I manually add a MX record called mail.domainname.com? 
    Like here circled in red (I did not add it yet):  If I need to do this, I am unsure of the priority number? I don't want to interfere with our EXCH 2003 server while doing this testing.

  • New Deployment: Outlook Can Send but not Receiving Messages

    We are in the process of setting up/testing a new installation of Exch 2013 for the first time. We created a Send Connector (Used MX records option) and left Receive connectors as is. We set up a test user in AD, then created mailbox with valid email
    address. We are using Outlook 2010 (on Windows7) to connect to Exchange, which was successful (use the automatic , not manual configure option).
    From Outlook, we can send an email to external address successfully. We cannot receive an email. We check the webmail account provided by our email host and the email is in the account.
    Note, with this same email host, we used the POP connector in EXCH2003 to get our email. We wanted to use SMTP to receive email in Exchange 2013. Could this be an issue at our email host (could they require POP connection)  OR is there a service will
    need to enable/add in EXCH and if so where is it?
    Also, we used the Microsoft Connectivity Analyzer for this test user and both SMTP Inbound and SMTP Outbound passed.
    One thing we just noticed is that the mailbox for the testuser must contain a few messages because of its usage report..Outlook just can't pick them up maybe...How can we tell if the mailbox has our test emails in it?
    Another odd thing  is that within Outlook, under Mailbox Cleanup, it shows that the Inbox should has a size of 12KB, which would be about the size of our test messages to it:
    Since our posting..we have looked at the mailbox using OWA and the Inbox has nothing in it there either. We tested internal email between this test user and the Administrator account and we can send and receive into the Inbox, both in OWA and Outlook, just
    fine...We did a search on the mailbox using the EAC and it did not find anything.

    We have MX records pointing to our domain that we use for email, but I do not think to our Exch2013 Server. We use them now with Exchange 2003. When I do NSLookup for our domain name it returns (2) MX records from our email host that I would expect,
    as they have always been there since the exch2003 box.
     NSLookup does not return mail.domainname.com on the list of MX records.  If I ping mail.domainname.com, it returns the public static IP address of our exchange server given to us by our ISP...but is that because I added that A Record today?
    I do not understand your statement... "To receive mail you must post your domain in the form of an MX record". Maybe there is something I need to add at my web host (Network Solutions)?? Do I manually add a MX record called mail.domainname.com? 
    Like here circled in red (I did not add it yet):  If I need to do this, I am unsure of the priority number? I don't want to interfere with our EXCH 2003 server while doing this testing.

  • Have 2 email accounts and both working till fine till the other day when one suddenly stopped working - will send but not receive . Have deleted and reinstalled but now will only download emails from 2011 ?

    I have 2 email accounts on my iPad and both worked fine till one suddenly stopped receiving mail but will still send . I have tried deleting the account and reinstalling but with no success . The account still works fine on my laptop !  Not sure what to try next to resolve this .

    Hi there Smyth2013,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

  • Im having trouble setting up my mail account, my mail will send but not receive and it is a  hotmail live account. Any soloutions on how to fix this

    Hi i have a Windows Live Account and have been trying to set up my 'Mail" account. I can set it up to send my messages but am unable to get it to receive my mail. Does anyone know how it should be set up in case I've set one part of it wrong or how I would find out what is preventing it from working?
    Thanks

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Maybe you are looking for