IMessages are on and active but still showing green
IMessages are on and active but still showing green
Is the recipient also using iMessages, and if so, do you have the correct address?
Similar Messages
-
So I went ot update my ipod on itunes....and a box appeared saying to make sure the internet setting are correct and active, but my internet is working fine. What do I do?
Sounds like this:
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
After upgrading to iOS7, I noted my iPhone 5 shows 1.0GB for Mail in the Usage list. I've cleaned out all mailboxes and folders but still show the Mail app as using 1.0 GB. Am I missing something?
From another thread -
Deleting mail from backup
In any case, I'm posting this to help others. I can't say with certainty what fixed this for me, but my hunch is that deleting (and then re-adding) the iCloud account on BOTH my iPhone and iPad had something to do with it. Or maybe it was launching/syncing via Mail.app, and/or giving it some time. Or maybe those prayers had something to do with it after all.
The funniest part about all of this is that my whole iPhone backup (with small Camera Roll) takes up 3.6 GB and my whole iPad backup (with even smaller Camera Roll) takes up 1.4 GB... so I'm still right up against that 5 GB quota, and will still end up paying $20/year for the extra 10 GB of space anyway. If only for elbow room, and if only for peace of mind.
So there ya have it. -
Making pictures that are black and white but still have color someplace(s)
Is there a way in aperture to make pictures black and white but still leave color on some objects. for example, having a picture of someone holding a glass of red wine and having everything except the wine black and white?
A couple of ways this can be done
- non destructively:
Use the Color adjustment to reduce the saturation of all the colors you dont want,
and leave only the saturation of the saturation of the color you do want.
Use the Ranges to more selectively choose the right color you want to leave.
- destructively:
Use the Dodge&Burn plug-in from Apple.
Set the brush to Desaturate, choose its strength and size appropriately.
Then just desaturate all the area's that need to be desaturated. -
App updates download and process but still show needs update
Since 10.5.3 often i'll have app updates and when i select to download them it will download and process but still stay in update available. I've tried all the standard, restart, logout etc but they are still there. Like right now Whiteboard Lite is the one hanging. Then randomly some day it will go through but its kind of annoying.
Ok...
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Cookies/com.apple.appstore.plist
Open a Finder window. Select your Home folder in the Sidebar on the left. Now open the LIbrary folder then the Caches folder.
Move these files to the Trash: com.apple.appstore and com.apple.storeagent
Now from the same Library folder open the Preferences folder. Move these files to the Trash.
com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder, open the Cookies folder. Move this file to the Trash.
com.apple.appstore.plist
If you don't see the com.apple.storeagent files, don't worry about it.
Restart your Mac. See if that made a difference.
Message was edited by: Carolyn -
Apple card was purchased and used but still showing 25 credits?
Purchased a Apple card for my son on Sunday for him to use it on his game, "clash of clans." He used the card and recieved what he purchased but it is still showing a 25 credit on the account. Did they mess up and didn't use it or what. Do you think he can use those credits again?
This is completely normal. NO need to be so over dramatice and go accusing anyone of ripping you off. Calm down and understand, before you mouth off.
Itunes verifies your account using the credit card info.
This does not mean that they will charge your credit card. -
Aebs stops working, but still shows green light
I will be connected to the aebs when it will suddenly and without warning disappear. No wireless devices can see the aebs and anything connected via ethernet loses its connection. The device still shows a solid green light, but it must be unpluggeed and replugged to reset it. Sometimes it will come back for a couple of days, sometimes only for a few minutes or even seconds. Originally I was having problems with a wireless telephone, but I replaced that and it seemed to be fine for awhile. Is it possible I just have a bad aebs?
Airport Extreme with 802.11n (Gigabit Ethernet)
Version 7.2.1 (as far as I know latest firmware and software, nothing newer is found with software update)
Airport base station agent 1.2.2
Airport Utility 5.2.2
Apple80211Agent 5.0.1
Mac OS 10.5.1
bought this iMac new about a month before the latest iMacs. there is one other iMac and sometimes Windows machines on the network, plus iphones, playstation 3 and wii (but those connections are intermittent). There doesn't seem to be any pattern as to what is connected to the network when it goes out.
Using WPA/WPA2 encryption 9 characters.
The SSID also stops broadcasting when it goes out.
Thanks,
Jim
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4 -
My iMessage says it is activated but still isn't working
I have an iPhone 5 with iOS 8.1.3 and I've been experiencing problems with my iMessage. It says it is activated, and for some people it will send iMessages. However, certain people (who I know that their iMessage is working) will not send as iMessage and I don't understand why. I have tried resetting my network settings. I have tried turning airplane mode on, wifi off, imessage off and on, and airplane mode off. I have turned my phone on and off a thousand times. I don't know why nothing is working. It's not a problem within my family's iCloud, because I can send iMessage to my mom but not my dad or sister. Some of my friends get my iMessages and some don't. There is really no pattern to it. It's extremely frustrating.
Hello samanthaelizabethb,
Thank you for participating in the Apple Support Communities.
It sounds like you are not able to send or receive iMessages to some of your contacts. This does sound frustrating, and you've tried many good troubleshooting steps.
You mentioned that you tried turning iMessage off and on. Make sure that you've also signed out of iMessage and FaceTime on your iPhone and any other devices you may be using:
Sign out and back in to iMessage and FaceTime
Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
On your iPhone first, sign back in to iMessage and Facetime.
Sign back in to iMessage and Facetime on your other devices.
If you still have trouble after signing back into iMessage on your iPhone, back up your data and restore iOS to factory settings:
Back up and restore your device
Use iTunes or iCloud to back up your content, then restore your device.
You can find the information above in this troubleshooting article:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Best Regards,
Jeremy -
GDM loaded and active, but not showing login-screen.
Hello Archers!
At the very beginning I would like to say "Hello" to all forum users!
I recently started using Arch Linux, after moving from Win8.1 to Ubuntu and then to Arch. I've went through a struggle of installing proprietary AMD graphic card drivers and finally managed to get it working. Although that was achieved with a little sacrifice - GDM stopped working. I can still run Gnome with "startx", but I can't get login-screen to work. Any ideas what happened and how to get it working?
I'm using xorg115 and proprietary AMD graphic drivers.
Output of
systemctl status gdm
● gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since pon 2014-10-20 20:37:45 CEST; 1min 8s ago
Main PID: 277 (gdm)
CGroup: /system.slice/gdm.service
└─277 /usr/bin/gdm
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: Child process 313 was already dead.
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmDisplay: display lasted 0,057605 seconds
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[306]: Process 303 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[308]: Process 307 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[312]: Process 311 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[310]: Process 309 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[300]: Process 282 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[314]: Process 313 (Xorg) of user 0 dumped core.Here you go!
grep (EE) /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
And full log here
[ 20.732]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 20.733] X Protocol Version 11, Revision 0
[ 20.733] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 20.733] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 20.733] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
[ 20.733] Build Date: 27 June 2014 07:32:26PM
[ 20.733]
[ 20.733] Current version of pixman: 0.32.6
[ 20.734] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.734] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.735] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 07:58:46 2014
[ 20.735] (==) Using config file: "/etc/X11/xorg.conf"
[ 20.735] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.735] (==) ServerLayout "aticonfig Layout"
[ 20.735] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 20.735] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 20.735] (**) | |-->Device "aticonfig-Device[0]-0"
[ 20.735] (==) Automatically adding devices
[ 20.735] (==) Automatically enabling devices
[ 20.735] (==) Automatically adding GPU devices
[ 20.735] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.735] Entry deleted from font path.
[ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.735] Entry deleted from font path.
[ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.735] Entry deleted from font path.
[ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.735] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.735] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.735] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.735] (II) Loader magic: 0x811cc0
[ 20.735] (II) Module ABI versions:
[ 20.735] X.Org ANSI C Emulation: 0.4
[ 20.735] X.Org Video Driver: 15.0
[ 20.735] X.Org XInput driver : 20.0
[ 20.735] X.Org Server Extension : 8.0
[ 20.737] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 20.737] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.737] Initializing built-in extension Generic Event Extension
[ 20.737] Initializing built-in extension SHAPE
[ 20.737] Initializing built-in extension MIT-SHM
[ 20.737] Initializing built-in extension XInputExtension
[ 20.737] Initializing built-in extension XTEST
[ 20.737] Initializing built-in extension BIG-REQUESTS
[ 20.737] Initializing built-in extension SYNC
[ 20.737] Initializing built-in extension XKEYBOARD
[ 20.738] Initializing built-in extension XC-MISC
[ 20.738] Initializing built-in extension SECURITY
[ 20.738] Initializing built-in extension XINERAMA
[ 20.738] Initializing built-in extension XFIXES
[ 20.738] Initializing built-in extension RENDER
[ 20.738] Initializing built-in extension RANDR
[ 20.738] Initializing built-in extension COMPOSITE
[ 20.738] Initializing built-in extension DAMAGE
[ 20.738] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.738] Initializing built-in extension DOUBLE-BUFFER
[ 20.739] Initializing built-in extension RECORD
[ 20.739] Initializing built-in extension DPMS
[ 20.739] Initializing built-in extension Present
[ 20.739] Initializing built-in extension DRI3
[ 20.739] Initializing built-in extension X-Resource
[ 20.739] Initializing built-in extension XVideo
[ 20.739] Initializing built-in extension XVideo-MotionCompensation
[ 20.739] Initializing built-in extension XFree86-VidModeExtension
[ 20.739] Initializing built-in extension XFree86-DGA
[ 20.739] Initializing built-in extension XFree86-DRI
[ 20.740] Initializing built-in extension DRI2
[ 20.740] (II) "glx" will be loaded by default.
[ 20.740] (II) LoadModule: "glx"
[ 20.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.740] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.740] compiled for 6.9.0, module version = 1.0.0
[ 20.740] Loading extension GLX
[ 20.740] (II) LoadModule: "fglrx"
[ 20.740] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 20.757] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 20.757] compiled for 1.4.99.906, module version = 14.30.4
[ 20.757] Module class: X.Org Video Driver
[ 20.757] (II) Loading sub module "fglrxdrm"
[ 20.757] (II) LoadModule: "fglrxdrm"
[ 20.758] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.760] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 20.760] compiled for 1.4.99.906, module version = 14.30.4
[ 20.760] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
[ 20.760] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
[ 20.760] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
[ 20.760] (++) using VT number 2
[ 20.762] (WW) Falling back to old probe method for fglrx
[ 20.775] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 20.776] ukiDynamicMajor: found major device number 250
[ 20.776] ukiDynamicMajor: found major device number 250
[ 20.777] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.777] ukiOpenDevice: node name is /dev/ati/card0
[ 20.777] ukiOpenDevice: open result is 9, (OK)
[ 20.853] ukiOpenByBusid: ukiOpenMinor returns 9
[ 20.853] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.855] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 20.856] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 20.856] (II) fglrx(0): pEnt->device->identifier=0x22ec7f0
[ 20.856] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 20.856] (II) fglrx(0): FB driver is not enabled
[ 20.856] (II) Loading sub module "vgahw"
[ 20.856] (II) LoadModule: "vgahw"
[ 20.857] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 20.857] (II) Module vgahw: vendor="X.Org Foundation"
[ 20.857] compiled for 1.15.2, module version = 0.1.0
[ 20.857] ABI class: X.Org Video Driver, version 15.0
[ 20.858] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 20.858] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 20.858] (==) fglrx(0): Default visual is TrueColor
[ 20.858] (**) fglrx(0): Option "DPMS" "true"
[ 20.858] (==) fglrx(0): RGB weight 888
[ 20.858] (II) fglrx(0): Using 8 bits per RGB
[ 20.858] (==) fglrx(0): Buffer Tiling is ON
[ 20.858] (II) Loading sub module "fglrxdrm"
[ 20.858] (II) LoadModule: "fglrxdrm"
[ 20.858] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.858] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 20.858] compiled for 1.4.99.906, module version = 14.30.4
[ 20.859] ukiDynamicMajor: found major device number 250
[ 20.859] ukiDynamicMajor: found major device number 250
[ 20.859] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.859] ukiOpenDevice: node name is /dev/ati/card0
[ 20.859] ukiOpenDevice: open result is 11, (OK)
[ 20.859] ukiOpenByBusid: ukiOpenMinor returns 11
[ 20.859] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.859] (**) fglrx(0): NoAccel = NO
[ 20.859] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 20.859] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series" (Chipset = 0x6818)
[ 20.859] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe217)
[ 20.859] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 20.859] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 20.859] (--) fglrx(0): MMIO registers at 0xf7e00000
[ 20.859] (--) fglrx(0): I/O port at 0x0000e000
[ 20.859] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 20.860] (II) fglrx(0): AC Adapter is used
[ 20.861] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 20.939] (II) Loading sub module "vbe"
[ 20.939] (II) LoadModule: "vbe"
[ 20.939] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 20.940] (II) Module vbe: vendor="X.Org Foundation"
[ 20.940] compiled for 1.15.2, module version = 1.1.0
[ 20.940] ABI class: X.Org Video Driver, version 15.0
[ 20.940] (II) fglrx(0): VESA BIOS detected
[ 20.940] (II) fglrx(0): VESA VBE Version 3.0
[ 20.940] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 20.940] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 20.940] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
[ 20.940] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 20.940] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
[ 20.940] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 20.940] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 20.940] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 20.940] (II) fglrx(0): PCIE card detected
[ 20.940] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 20.940] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 20.940] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 20.940] (II) fglrx(0): RandR 1.2 support is enabled!
[ 20.940] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 20.940] (II) Loading sub module "fb"
[ 20.940] (II) LoadModule: "fb"
[ 20.941] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.942] (II) Module fb: vendor="X.Org Foundation"
[ 20.942] compiled for 1.15.2, module version = 1.0.0
[ 20.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.942] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 20.942] (II) Loading sub module "ddc"
[ 20.942] (II) LoadModule: "ddc"
[ 20.942] (II) Module "ddc" already built-in
[ 21.049] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 21.049] (II) fglrx(0): Output DFP2 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP3 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP4 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP5 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP6 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP7 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP8 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP9 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP10 has no monitor section
[ 21.049] (II) fglrx(0): Output CRT1 has no monitor section
[ 21.049] (II) Loading sub module "ddc"
[ 21.049] (II) LoadModule: "ddc"
[ 21.049] (II) Module "ddc" already built-in
[ 21.050] (II) fglrx(0): Connected Display0: CRT1
[ 21.050] (II) fglrx(0): Display0 EDID data ---------------------------
[ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
[ 21.050] (II) fglrx(0): Year: 2008 Week: 36
[ 21.050] (II) fglrx(0): EDID Version: 1.3
[ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 21.050] (II) fglrx(0): Sync: Separate
[ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 21.050] (II) fglrx(0): Gamma: 2.20
[ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 21.050] (II) fglrx(0): First detailed timing is preferred mode
[ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.050] (II) fglrx(0): Supported established timings:
[ 21.050] (II) fglrx(0): 720x400@70Hz
[ 21.050] (II) fglrx(0): 640x480@60Hz
[ 21.050] (II) fglrx(0): 640x480@67Hz
[ 21.050] (II) fglrx(0): 640x480@72Hz
[ 21.050] (II) fglrx(0): 640x480@75Hz
[ 21.050] (II) fglrx(0): 800x600@56Hz
[ 21.050] (II) fglrx(0): 800x600@60Hz
[ 21.050] (II) fglrx(0): 800x600@72Hz
[ 21.050] (II) fglrx(0): 800x600@75Hz
[ 21.050] (II) fglrx(0): 832x624@75Hz
[ 21.050] (II) fglrx(0): 1024x768@60Hz
[ 21.050] (II) fglrx(0): 1024x768@70Hz
[ 21.050] (II) fglrx(0): 1024x768@75Hz
[ 21.050] (II) fglrx(0): 1280x1024@75Hz
[ 21.050] (II) fglrx(0): 1152x864@75Hz
[ 21.050] (II) fglrx(0): Manufacturer's mask: 0
[ 21.050] (II) fglrx(0): Supported standard timings:
[ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.050] (II) fglrx(0): Supported detailed timing:
[ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 21.050] (II) fglrx(0): Monitor name: LCD224WM
[ 21.050] (II) fglrx(0): Serial No: 89104229TB
[ 21.050] (II) fglrx(0): EDID (in hex):
[ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
[ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
[ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
[ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
[ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
[ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
[ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
[ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
[ 21.050] (II) fglrx(0): End of Display0 EDID data --------------------
[ 21.050] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 21.050] (II) fglrx(0): EDID for output DFP1
[ 21.050] (II) fglrx(0): EDID for output DFP2
[ 21.050] (II) fglrx(0): EDID for output DFP3
[ 21.050] (II) fglrx(0): EDID for output DFP4
[ 21.050] (II) fglrx(0): EDID for output DFP5
[ 21.050] (II) fglrx(0): EDID for output DFP6
[ 21.050] (II) fglrx(0): EDID for output DFP7
[ 21.050] (II) fglrx(0): EDID for output DFP8
[ 21.050] (II) fglrx(0): EDID for output DFP9
[ 21.050] (II) fglrx(0): EDID for output DFP10
[ 21.050] (II) fglrx(0): EDID for output CRT1
[ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
[ 21.050] (II) fglrx(0): Year: 2008 Week: 36
[ 21.050] (II) fglrx(0): EDID Version: 1.3
[ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 21.050] (II) fglrx(0): Sync: Separate
[ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 21.050] (II) fglrx(0): Gamma: 2.20
[ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 21.050] (II) fglrx(0): First detailed timing is preferred mode
[ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.050] (II) fglrx(0): Supported established timings:
[ 21.050] (II) fglrx(0): 720x400@70Hz
[ 21.050] (II) fglrx(0): 640x480@60Hz
[ 21.050] (II) fglrx(0): 640x480@67Hz
[ 21.050] (II) fglrx(0): 640x480@72Hz
[ 21.050] (II) fglrx(0): 640x480@75Hz
[ 21.050] (II) fglrx(0): 800x600@56Hz
[ 21.050] (II) fglrx(0): 800x600@60Hz
[ 21.050] (II) fglrx(0): 800x600@72Hz
[ 21.050] (II) fglrx(0): 800x600@75Hz
[ 21.050] (II) fglrx(0): 832x624@75Hz
[ 21.050] (II) fglrx(0): 1024x768@60Hz
[ 21.050] (II) fglrx(0): 1024x768@70Hz
[ 21.050] (II) fglrx(0): 1024x768@75Hz
[ 21.050] (II) fglrx(0): 1280x1024@75Hz
[ 21.050] (II) fglrx(0): 1152x864@75Hz
[ 21.050] (II) fglrx(0): Manufacturer's mask: 0
[ 21.050] (II) fglrx(0): Supported standard timings:
[ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.050] (II) fglrx(0): Supported detailed timing:
[ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 21.050] (II) fglrx(0): Monitor name: LCD224WM
[ 21.050] (II) fglrx(0): Serial No: 89104229TB
[ 21.050] (II) fglrx(0): EDID (in hex):
[ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
[ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
[ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
[ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
[ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
[ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
[ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
[ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
[ 21.050] (II) fglrx(0): Printing probed modes for output CRT1
[ 21.051] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 21.051] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1152x864"x60.0 146.25 1152 1960 2136 2240 864 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 21.051] (II) fglrx(0): Output DFP1 disconnected
[ 21.051] (II) fglrx(0): Output DFP2 disconnected
[ 21.051] (II) fglrx(0): Output DFP3 disconnected
[ 21.051] (II) fglrx(0): Output DFP4 disconnected
[ 21.051] (II) fglrx(0): Output DFP5 disconnected
[ 21.051] (II) fglrx(0): Output DFP6 disconnected
[ 21.051] (II) fglrx(0): Output DFP7 disconnected
[ 21.051] (II) fglrx(0): Output DFP8 disconnected
[ 21.051] (II) fglrx(0): Output DFP9 disconnected
[ 21.051] (II) fglrx(0): Output DFP10 disconnected
[ 21.051] (II) fglrx(0): Output CRT1 connected
[ 21.051] (II) fglrx(0): Using exact sizes for initial modes
[ 21.051] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
[ 21.051] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.051] (II) fglrx(0): DPI set to (96, 96)
[ 21.051] (II) fglrx(0): Eyefinity capable adapter detected.
[ 21.051] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 21.051] (==) fglrx(0): PseudoColor visuals disabled
[ 21.051] (II) Loading sub module "ramdac"
[ 21.051] (II) LoadModule: "ramdac"
[ 21.051] (II) Module "ramdac" already built-in
[ 21.051] (==) fglrx(0): NoDRI = NO
[ 21.051] (==) fglrx(0): Capabilities: 0x00000000
[ 21.051] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 21.051] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 21.051] (==) fglrx(0): UseFastTLS=0
[ 21.051] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 21.051] (--) Depth 24 pixmap format is 32 bpp
[ 21.051] Loading extension ATIFGLRXDRI
[ 21.051] (II) fglrx(0): doing swlDriScreenInit
[ 21.051] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.051] ukiOpenDevice: node name is /dev/ati/card0
[ 21.051] ukiOpenDevice: open result is 12, (OK)
[ 21.051] ukiOpenByBusid: ukiOpenMinor returns 12
[ 21.051] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.051] (II) fglrx(0): [uki] DRM interface version 1.0
[ 21.051] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 21.051] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 21.051] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7facb602b000
[ 21.051] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 21.051] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 21.051] (II) fglrx(0): swlDriScreenInit done
[ 21.051] (II) fglrx(0): Kernel Module Version Information:
[ 21.051] (II) fglrx(0): Name: fglrx
[ 21.051] (II) fglrx(0): Version: 14.30.4
[ 21.051] (II) fglrx(0): Date: Sep 15 2014
[ 21.051] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 21.051] (II) fglrx(0): Kernel Module version matches driver.
[ 21.051] (II) fglrx(0): Kernel Module Build Time Information:
[ 21.051] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.4-1-ARCH
[ 21.051] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 21.051] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 21.051] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 21.051] (II) fglrx(0): [uki] register handle = 0x00004000
[ 21.053] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 21.053] (II) fglrx(0): DRI initialization successfull
[ 21.054] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010a0000
[ 21.056] (==) fglrx(0): Backing store enabled
[ 21.056] Loading extension FGLRXEXTENSION
[ 21.056] (**) fglrx(0): DPMS enabled
[ 21.056] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 21.056] (**) fglrx(0): Textured Video is enabled.
[ 21.056] (II) LoadModule: "glesx"
[ 21.056] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 21.069] (II) Module glesx: vendor="X.Org Foundation"
[ 21.070] compiled for 1.4.99.906, module version = 1.0.0
[ 21.070] Loading extension GLESX
[ 21.070] (II) fglrx(0): GLESX enableFlags = 8784
[ 21.070] (II) fglrx(0): GLESX is enabled
[ 21.070] (II) LoadModule: "amdxmm"
[ 21.070] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 21.072] (II) Module amdxmm: vendor="X.Org Foundation"
[ 21.072] compiled for 1.4.99.906, module version = 2.0.0
[ 21.082] Loading extension AMDXVOPL
[ 21.082] Loading extension AMDXVBA
[ 21.083] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 21.084] (II) fglrx(0): Enable composite support successfully
[ 21.084] (WW) fglrx(0): Option "VendorName" is not used
[ 21.084] (WW) fglrx(0): Option "ModelName" is not used
[ 21.084] (II) fglrx(0): X context handle = 0x1
[ 21.084] (II) fglrx(0): [DRI] installation complete
[ 21.084] (==) fglrx(0): Silken mouse enabled
[ 21.085] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 21.085] (II) fglrx(0): LPT is disabled by configure option
[ 21.085] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.199] (--) RandR disabled
[ 21.202] ukiDynamicMajor: found major device number 250
[ 21.202] ukiDynamicMajor: found major device number 250
[ 21.202] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.202] ukiOpenDevice: node name is /dev/ati/card0
[ 21.202] ukiOpenDevice: open result is 13, (OK)
[ 21.202] ukiOpenByBusid: ukiOpenMinor returns 13
[ 21.202] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiOpenDevice: node name is /dev/ati/card0
[ 21.235] ukiOpenDevice: open result is 14, (OK)
[ 21.235] ukiGetBusid returned 'PCI:1:0:0'
[ 21.235] ukiOpenDevice: node name is /dev/ati/card1
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card2
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card3
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card4
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card5
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card6
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card7
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card8
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card9
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card10
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card11
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card12
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card13
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card14
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card15
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.235] ukiOpenDevice: node name is /dev/ati/card0
[ 21.235] ukiOpenDevice: open result is 14, (OK)
[ 21.235] ukiOpenByBusid: ukiOpenMinor returns 14
[ 21.235] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.330] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiOpenDevice: node name is /dev/ati/card0
[ 21.331] ukiOpenDevice: open result is 15, (OK)
[ 21.331] ukiGetBusid returned 'PCI:1:0:0'
[ 21.331] ukiOpenDevice: node name is /dev/ati/card1
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card2
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card3
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card4
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card5
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card6
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card7
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card8
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card9
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card10
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card11
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card12
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card13
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card14
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card15
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiDynamicMajor: found major device number 250
[ 21.332] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.332] ukiOpenDevice: node name is /dev/ati/card0
[ 21.332] ukiOpenDevice: open result is 15, (OK)
[ 21.332] ukiOpenByBusid: ukiOpenMinor returns 15
[ 21.332] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.360] (II) fglrx(0): OverDrive5 Detected!
[ 21.362] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 21.420] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 21.420] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.420] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.420] (II) LoadModule: "evdev"
[ 21.421] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.423] (II) Module evdev: vendor="X.Org Foundation"
[ 21.423] compiled for 1.15.1, module version = 2.9.0
[ 21.423] Module class: X.Org XInput Driver
[ 21.423] ABI class: X.Org XInput driver, version 20.0
[ 21.423] (II) Using input driver 'evdev' for 'Power Button'
[ 21.423] (**) Power Button: always reports core events
[ 21.423] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 21.423] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.423] (--) evdev: Power Button: Found keys
[ 21.423] (II) evdev: Power Button: Configuring as keyboard
[ 21.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 21.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.423] (**) Option "xkb_rules" "evdev"
[ 21.423] (**) Option "xkb_model" "pc104"
[ 21.423] (**) Option "xkb_layout" "pl"
[ 21.447] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.447] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.447] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.447] (II) Using input driver 'evdev' for 'Power Button'
[ 21.447] (**) Power Button: always reports core events
[ 21.447] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.447] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.447] (--) evdev: Power Button: Found keys
[ 21.447] (II) evdev: Power Button: Configuring as keyboard
[ 21.447] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 21.447] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.447] (**) Option "xkb_rules" "evdev"
[ 21.447] (**) Option "xkb_model" "pc104"
[ 21.447] (**) Option "xkb_layout" "pl"
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event11)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event19)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event20)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event0)
[ 21.451] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev pointer catchall"
[ 21.451] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
[ 21.451] (**) Logitech Gaming Mouse G502: always reports core events
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event0"
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found 20 mouse buttons
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found x and y relative axes
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.451] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:046D:C07D.0001/input/input2/event0"
[ 21.451] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 8)
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[ 21.452] (II) No input driver specified, ignoring this device.
[ 21.452] (II) This device may have been added with another device file.
[ 21.452] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event1)
[ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "system-keyboard"
[ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev keyboard catchall"
[ 21.452] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
[ 21.452] (**) Logitech Gaming Mouse G502: always reports core events
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event1"
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found 1 mouse buttons
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing relative x/y axes to exist.
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found absolute axes
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing absolute x/y axes to exist.
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found keys
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as keyboard
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C07D.0002/input/input3/event1"
[ 21.452] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: KEYBOARD, id 9)
[ 21.452] (**) Option "xkb_rules" "evdev"
[ 21.452] (**) Option "xkb_model" "pc104"
[ 21.452] (**) Option "xkb_layout" "pl"
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
[ 21.452] (WW) evdev: Logitech Gaming Mouse G502: ignoring absolute axes.
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[ 21.453] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event2)
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.453] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
[ 21.453] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event2"
[ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
[ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
[ 21.453] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
[ 21.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:045E:0768.0003/input/input4/event2"
[ 21.453] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 10)
[ 21.453] (**) Option "xkb_rules" "evdev"
[ 21.453] (**) Option "xkb_model" "pc104"
[ 21.453] (**) Option "xkb_layout" "pl"
[ 21.454] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event3)
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.454] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event3"
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found 1 mouse buttons
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found scroll wheel(s)
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found relative axes
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing relative x/y axes to exist.
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found absolute axes
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing absolute x/y axes to exist.
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as mouse
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Adding scrollwheel support
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: YAxisMapping: buttons 4 and 5
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:045E:0768.0004/input/input5/event3"
[ 21.454] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 11)
[ 21.454] (**) Option "xkb_rules" "evdev"
[ 21.454] (**) Option "xkb_model" "pc104"
[ 21.454] (**) Option "xkb_layout" "pl"
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: initialized for relative axes.
[ 21.454] (WW) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: ignoring absolute axes.
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) keeping acceleration scheme 1
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration profile 0
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration factor: 2.000
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration threshold: 4
[ 21.454] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.454] (II) No input driver specified, ignoring this device.
[ 21.454] (II) This device may have been added with another device file.
[ 21.458] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 22.742] (II) fglrx(0): EDID vendor "NEC", prod id 26419
[ 22.742] (II) fglrx(0): Using EDID range info for horizontal sync
[ 22.742] (II) fglrx(0): Using EDID range info for vertical refresh
[ 22.742] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 22.742] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 24.160] (II) fglrx(0): EDID vendor "NEC", prod id 26419
[ 24.160] (II) fglrx(0): Using hsync ranges from config file
[ 24.160] (II) fglrx(0): Using vrefresh ranges from config file
[ 24.160] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.160] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.161] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
EDIT
Tried symlinking
/usr/lib64/dri
to
/usr/X11R6/lib64/modules
And made that error in Xorg log disappear. However, gdm is still not working. I'm getting stuck at
[ OK ] Reached target Graphical Interface.
I can still log with other tty and startx manually.
Output of
systemctl status gdm
● gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since wto 2014-10-21 16:10:03 CEST; 6min ago
Main PID: 276 (gdm)
CGroup: /system.slice/gdm.service
└─276 /usr/bin/gdm
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[313]: Process 312 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[309]: Process 308 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[303]: Process 288 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[311]: Process 310 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[307]: Process 306 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[317]: Process 316 (Xorg) of user 0 dumped core.
and content of
Xorg.0.log
[ 62.476]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 62.476] X Protocol Version 11, Revision 0
[ 62.476] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 62.476] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 62.476] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
[ 62.477] Build Date: 27 June 2014 07:32:26PM
[ 62.477]
[ 62.477] Current version of pixman: 0.32.6
[ 62.477] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 62.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62.478] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 16:11:00 2014
[ 62.478] (==) Using config file: "/etc/X11/xorg.conf"
[ 62.478] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 62.478] (==) ServerLayout "aticonfig Layout"
[ 62.478] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 62.478] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 62.479] (**) | |-->Device "aticonfig-Device[0]-0"
[ 62.479] (==) Automatically adding devices
[ 62.479] (==) Automatically enabling devices
[ 62.479] (==) Automatically adding GPU devices
[ 62.479] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 62.479] Entry deleted from font path.
[ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 62.479] Entry deleted from font path.
[ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 62.479] Entry deleted from font path.
[ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 62.479] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 62.479] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62.479] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62.479] (II) Loader magic: 0x811cc0
[ 62.479] (II) Module ABI versions:
[ 62.479] X.Org ANSI C Emulation: 0.4
[ 62.479] X.Org Video Driver: 15.0
[ 62.479] X.Org XInput driver : 20.0
[ 62.479] X.Org Server Extension : 8.0
[ 62.480] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 62.480] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 62.480] Initializing built-in extension Generic Event Extension
[ 62.480] Initializing built-in extension SHAPE
[ 62.480] Initializing built-in extension MIT-SHM
[ 62.480] Initializing built-in extension XInputExtension
[ 62.480] Initializing built-in extension XTEST
[ 62.481] Initializing built-in extension BIG-REQUESTS
[ 62.481] Initializing built-in extension SYNC
[ 62.481] Initializing built-in extension XKEYBOARD
[ 62.481] Initializing built-in extension XC-MISC
[ 62.481] Initializing built-in extension SECURITY
[ 62.481] Initializing built-in extension XINERAMA
[ 62.481] Initializing built-in extension XFIXES
[ 62.481] Initializing built-in extension RENDER
[ 62.481] Initializing built-in extension RANDR
[ 62.481] Initializing built-in extension COMPOSITE
[ 62.482] Initializing built-in extension DAMAGE
[ 62.482] Initializing built-in extension MIT-SCREEN-SAVER
[ 62.482] Initializing built-in extension DOUBLE-BUFFER
[ 62.482] Initializing built-in extension RECORD
[ 62.482] Initializing built-in extension DPMS
[ 62.482] Initializing built-in extension Present
[ 62.482] Initializing built-in extension DRI3
[ 62.482] Initializing built-in extension X-Resource
[ 62.482] Initializing built-in extension XVideo
[ 62.482] Initializing built-in extension XVideo-MotionCompensation
[ 62.483] Initializing built-in extension XFree86-VidModeExtension
[ 62.483] Initializing built-in extension XFree86-DGA
[ 62.483] Initializing built-in extension XFree86-DRI
[ 62.483] Initializing built-in extension DRI2
[ 62.483] (II) "glx" will be loaded by default.
[ 62.483] (II) LoadModule: "glx"
[ 62.483] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62.483] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 62.483] compiled for 6.9.0, module version = 1.0.0
[ 62.483] Loading extension GLX
[ 62.484] (II) LoadModule: "fglrx"
[ 62.484] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 62.501] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 62.501] compiled for 1.4.99.906, module version = 14.30.4
[ 62.501] Module class: X.Org Video Driver
[ 62.501] (II) Loading sub module "fglrxdrm"
[ 62.501] (II) LoadModule: "fglrxdrm"
[ 62.501] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 62.504] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 62.504] compiled for 1.4.99.906, module version = 14.30.4
[ 62.504] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
[ 62.504] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
[ 62.504] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
[ 62.504] (++) using VT number 3
[ 62.505] (WW) Falling back to old probe method for fglrx
[ 62.519] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 62.521] ukiDynamicMajor: found major device number 250
[ 62.521] ukiDynamicMajor: found major device number 250
[ 62.521] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 62.521] ukiOpenDevice: node name is /dev/ati/card0
[ 62.521] ukiOpenDevice: open result is 9, (OK)
[ 62.605] ukiOpenByBusid: ukiOpenMinor returns 9
[ 62.605] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 62.607] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 62.607] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 62.608] (II) fglrx(0): pEnt->device->identifier=0x23d17f0
[ 62.608] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 6 -
My Ipod touch displays white lines across my entire screen. I've turned it on and off and it still hasn't cleared up.HELP!?!
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that points to a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I cannot get my iMac to find my printer. Both are on and connected but still cannot print.
I have an iMac and use it with an HP wireless printer. Both iMac and printer are connected however everytime I hit print my print queue says the printer is not connected. Have restarted both and retyped wireless key into printer to no avail.
Restart your router and try to print after
-
I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?
dam122577 wrote:
but wont restoring as new delete all my info on my phone
Yes. That is why I added...
it will disappear over time due to non-use. -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
I just got my Ipad and I can not download apps. I get a message saying my Apple ID has been disabled. I have reset my password, I can access itunes and icloud but still can not download apps. Can someone please tell me how to get my ID activated? TY
Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it
Maybe you are looking for
-
How to open a specific Calendar in Outlook
Hi, I'm struggling to find an example on other forums, or not understanding the code. I want to open a non-default calendar in Outlook to create an appointment (it's a hotmail account, which is shared with a couple of people, so that they can all see
-
SecurityException due to problems with realm
Hi, we try to run our web application (developed and successfully deployed under WebLogic5.1) on the WebLogic6.0. After transforming the weblogic.properties file followed by adjusting the new config.xml and copying the necessary classes, *.jar, *.jsp
-
Feature Request: Destructive editing with AUs in Sample Editor
I would like to be able to apply edits destructively in the sample edit window with Audio Units like we could in Logic on MacOS9 (which used AudioSuite plugins). This is an ongoing request, year after year, among veteran Logic users. In every update
-
Test of Web Dynpro Event Handling : GeoMap business graphics
Hy guru's, i have this problem: on Test of Web Dynpro Event Handling page i tried to open the GeoMap web dynpro on Business Graphics section but i received this error: The URL http://.../sap/bc/webdynpro/sap/wdr_test_events/ was not called due to an
-
How do I open a docx file extention with InDesign CC 2.01?
How do I open a docx file extension with InDesign CC 2.01?