Imessages no longer work with non apple id in hand off

since the latest update, several of the messages that I was active in on my Ipad air 2 (with an Iphone 5 ) stopped working
I have several conversation threads ON THE IPAD that were active and now can no longer respond to.
It says it is because they don't have and Apple ID  but they were working yesterday.  I didn't change any settings and have already reset the network.
How annoying to have to go get the phone (which works fine with ALL) for some people..

I did,  was traveling at the time and just got home to apply the fix..  It worked and thank you so much.....  too bad tech support couldn't tell me this last night...
it was a quick and easy fix....  THank YOU..

Similar Messages

  • Airplay not working with non-apple router

    I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
    The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
    I have another Express hooked to the network via ethernet and everything works fine with that one.
    Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
    thanks

    Factory reset the express, and try to make it join again...

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • Imessage doesn't work with non iphone users

    My imessage used to work with anyone who text me.  Then it stopped working after I updated my software on my iphone.  I have got imessage working for iphone users but not non-iphone users.  If they don't have an iphone, I can no longer send or receive their messages on my imac desktop.  Can anyone help me?
    Thanks,
    Michelle

    Hi,
    As the other poster says, reset it from the Beginning.
    9:33 pm      Wednesday; April 1, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My iMessage no longer works with the new is07 update how do I fix this

    My iMessage and some of my applications no longer work with the new software update. How do I fix this?

    I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
    http://support.apple.com/kb/TS4268?viewlocale=en_US
    I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
    Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
    Hope this helps.

  • All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

    All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV.  It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1". 

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Airport Extreme won't work with non apple products?

    this is a recent problem after years on working ok.

    You have not given us enough info to say anything. you haven't asked a question.
    AE work fine as AP with non-apple clients.
    I have multiple phones and wireless devices from numerous brands working with AE and TC.
    What you might find is that naming of the AE has become more of a problem.. so you need to use SMB naming.. ie short, no spaces and pure alphanumeric, for the AE itself and the wireless SSID.
    You might also find the latest firmware upgrade did nobody any good. If your AE is the flat one, go back to 7.6.1 which IMHO works better.
    If your AE is old it could be just faulty.. it might need replacement.
    If you want to do things like wireless extend, then there are huge issues with mixing apple and non-apple wireless routers.. but that is not new.. it has been an issues since Apple routers came out.

  • Messenger not working with non-apple cells after changing password iOS password

    I changed my password because apple decided to not accept my password simply trying to download an app and after i got home, i lost capabitilty of texting to non-iphones through the messenger app.
    It absolutely lost the capability i had before simply by changing my password.
    I tried relogging in in all my devices iphone, ipad, and macbook pro and though i can text fine on my iphone, i no longer can text outside of the apple world to android cell phone users.
    How do i regain connectivity to the rest of the world instead of just apples?!
    Thank you in advance.

    Hi,
    If the iCloud ID is the same one you use in Messages for the iMessages account then you need to change the password there and in all other devices.
    As you tend to be unable to change all devices at the same time the link between the iPhone number and th Apple ID tends to get lost which then means any Text Forwarding linking also gets broken.
    On the Mac Version Untick the Enable box for the iMessages account.
    On the iPhone remove the Apple ID and place the iPhone in Airplane mode for a good two minutes.
    Go back to the Messages settings after this and make sure the iPhone number Verifies.
    When this is done turn th Enable box back On on the Mac version.
    Untick the iPhone number as a Receive "ID".  This may make the Start Conversation From drop down disappear.
    Send an iMessages from the iPhone (it can only use it's number) to the Apple ID (Effectively the Mac)
    Send a reply.
    This will check that the iPhone  (Number) can Send and Receive.
    Now on the iPhone Add back the Apple ID to re-link them.
    This should cause the Pop up to appear on the Mac.
    If it does not Restart the Mac version.
    This should Enable the unticked iPhone number in the Receive At list and make the Start Form drop down appear.
    Now Reset the Text Forwarding.
    9:42 pm      Monday; March 23, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • The Remote App on my iPhone no longer works with my Apple TV 1st Gen

    I don't use it that often but when I want to, I want to...u know how it goes. Since one of the updates for the Remote app on the iPhone it no longer "sees" my 1st gen Apple TV, any ideas or am I SOL? Apple TV 1st gen doesn't do homesharing does it?

    there used to be a dark gray "pad" area on the display of my phone in the remote app that I could use kinda like a track pad to move around the menus on the appletv, u could tap it, swipe it etc, that's gone cause it no longer sees my apple tv library, I can't find the library on the apple tv, is that cause homesharing isn't available and it only sees things thru homesharing?

  • Can't make Airport Extreme router work with non-Apple device

    I am trying to help a friend who has a PC (Windows 7) that has a wired Ethernet connection to his girlfriend's Airport Extreme router.  He wants his Internet-capable Blu-Ray player and her IPad to wirelessly access the Internet via the Aiport Extreme router, with both the Blu-Ray player and the IPad's Internet access protected by WPA-2 encryption (both devices are capable of WPA-2).  How do I do this?
    Here are the problems we've run into:
    1)  The Airport Utility for Windows (5.6.1) has been installed on the P.C., and we've used it to update the firmware on the Airport Extreme router.  However, after we followed the Aiport Utility instructions to set up the network, all the router wanted to do was look for an Apple device.  His girlfriend and her IPad are out-of-town right now, so the only device within range was the Blu-Ray player, and the router did not see it.  Not only that, but almost all the menu options on the Airport Utility were "greyed out" (unusable), except for "Configuration."  I am very troubled by the fact that the Airport Extreme router seems to want to look only for Apple devices.
    2)  In order to get Internet access for his Blu-Ray player for the time being, my friend pushed the "reset" button on the Airport Extreme router, and he can now use his Blu-Ray player for Netflix and other Internet streaming options.  However, the Blu-Ray's wireless Internet access is an unencrypted connection, and the Airport Extreme router is displaying a flashing amber light -- not a good situation. 
    3) Although I know his girlfriend could access the router via her IPad when she returns, she is French-Canadian, and her IPad operates in French.  I happen to know some French, but I have enough trouble trying to understand  wireless networking terminology in English without having to try to figure out the equivalent terms in French.  Thankfully, the Airport Utility for Windows on his P.C. is in English, so that's what we've got to use to solve this problem.
    I have profound respect for Apple products, but I'm a Windows/Linkysis router guy, so that's why I'm stumped.  Can anybody out there help me?

    Which model of the AirPort Extreme Base Station (AEBS) do they have? What is the version of firmware that you updated it to?
    By default, the AEBS will broadcast an unsecured Wi-Fi network with a network name (or SSID) of something like Apple Network NNNNNN. This would be similar to a Linksys when first powered-up.

  • HT4972 My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

    My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • Multiple Apple Remotes no longer work with Apple TV!

    I've been using Apple TVs since the minute Steve Jobs introduced them in 2007. I bought the 2nd and 3rd Generation Apple TVs the minute each of them were introduced. I've been watching every Apple Keynote Address since they were available online or on CDs from the early 1990s, on my HDTV via my latest Apple TV when that was possible. I watch far more TV through my Apple TV than via my Cable Box, much of it music and music videos from iTunes on my 2006 Mac Pro! But as of YESTERDAY I am seriously thinking of getting another, ANY OTHER manufacturer's similar internet streaming box!!!
    WHY??? Because YESTERDAY, for no apparent reason except some programmer's or software engineer's stupidity, my Apple TV stopped working with all but ONE of my Apple REMOTES!!!
    Why is that stupid? Because, in my household there are three people who use Apple TV all day, and each of them have an aluminum Apple Remote which they all use to control what the Apple TV is streaming. We have two other Apple Remotes lying around in case one of us misplaces his or her Apple Remote, which happens occasionally. ALL FIVE of the Apple Remotes, just like the beige plastic Apple Remotes that they replaced, always worked with all three of my Apple TVs! Then yesterday, suddenly, only the LAST Apple Remote that was paired with this 3rd Generation Apple TV is able to control it.
    I've spent HOURS trying to fix this. This wasn't caused by an Automatic Update to the Apple TV's iOS; there has been no update in recent days. I've got Automatic Update turned on, just as I, a good Apple citizen, have my Apple TV set up to automatically send back Usage Data to Apple. I've rebooted my Apple TV. I've put brand new 2032 button batteries into my Apple Remotes. I pulled the power cord out of my Apple TV for 15 seconds and again for five minutes and then restarted it. As per instructions, I have Unpaired and re-Paired each and all of my 5 Apple Remotes. All to no avail. Only the last Apple Remote that was paired with the Apple TV works! Horrible. And STUPID, if it was a deliberate programming decision and it was introduced in a minor automatic update.
    Worse, I've been using the Remote app on my 5th Generation iPod touch to replace ONE of the unusable Apple Remotes, and as of a couple of minutes ago even THAT stopped working with my Apple TV! Well, I was able to fix that fairly easily by pairing the iPod touch Remote app with my Mac Pro and then pairing it again with my Apple TV. But I don't think that solution would be so easy for many non-technologically-inclined users. I also don't think that a $200 or $300 iPod touch is a very acceptable replacement for a $20 Apple Remote, especially since everyone buys iPod touches for totally different uses (I use mine primarily for taking notes using voice-activated audio or video -- it is by far the best device for that purpose out there -- police departments should take note).
    I'm hoping that this multiple Apple Remote problem somehow resolves itself, unless it is a hardware problem with my Apple TV. If so, I can hold out until Apple's media event next week, which I HOPE will premiere a new 4th Generation Apple TV, hopefully which will once again allow my five Apple Remotes to all control my Apple TV interdependently, without having to Unpair and Pair each one each time you wanted to use it, requiring you to quit whichever Apple TV app you were using each time, or alternatively to use Sneaker-Net to deliver the one working Apple Remote to each person who wants to use it, which can be difficult since at least one of the users is very ill! (Whew! A long sentence. But I hope you get the point.)
    Two days ago, I could never have imagined myself getting a Roku or an Amazon, Sony, Microsoft or some other streaming device. It just proves how fast a stupid little decision (if it was deliberate) can turn EVERYTHING around!

    People have a misconception with remote pairing (as does the description on this page -> Pairing your Apple Remote with your computer - Apple Support).
    The 1st paragraph is incorrect.
    The 2nd paragraph is correct.
    "If you have several Mac computers or an Apple TV that use the Apple remote, or other devices with integrated infrared ("IR") receivers in one room, you can "pair" your Apple Remote with a specific Apple device so it doesn't interfere with other Apple devices or IR devices nearby.
    Pairing allows you to set the receiving Apple device so that only it can be controlled by one remote. Learn how to pair your Apple Remote"
    Pairing sets the device to read only a specific remote.
    It does not set a specific remote to work only with a specific device. ie. if you point th remote at another Apple device (that is not paired) it will control it.

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

    Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

    Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
    Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
    Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
    http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

  • My iMessages no longer work on my iPad or mac. They still work on my iPhone. It says all my contacts are no longer registered with iMessage.

    My iMessages no longer work on my iPad or mac. They still work on my iPhone. It says all my contacts are no longer registered with iMessage.

    Hi,
    There have been no updates recently.
    You would also know if the computer had stopped for an Update.
    On the Mac in the Contacts App in the Contacts Menu > Accounts is it shown to be using iCloud to Sync the info between all devices ?
    8:47 pm      Tuesday; August 26, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for