IMessages: the read receipt is not consistent?

Apologies but I'm getting so much into my iPhone. And I've found this forum so helpful!
Right: I've turned my iMessages back on, with the read receipt also on. You see I text A LOT. Now 3 contacts are telling me that just beneath their sent message to me, blue bubble, sometimes it says 'read' and sometimes it says 'delivered'. But truly I have read all their messages, in fact I've even replied (when it just said delivered). I checked my settings, the read receipt is still on. So why is it not consistent? Many thanks.

Hi vijay,
2007B is in trail version only.
if you have any proble in the live DB you have get the support from SAP TEAM.
Please raise the issue to the SAP.
Regards
Chidambaram

Similar Messages

Help in getting the Read receipt in external mails ( like yahoomail , gmail

Hi Experts,
Scenario : We are sending notification mail to our external vendors for example abc.hotmail.com. We expect a Read acknowledgement to ensure the external vendor has gone through our notification generated from our SAP system. Point to consider is the two mail servers are different, sending mail server is configured to Outlook where as the receiving server will differ each time.
It would be better if anyone lets me know whether SAP ensure that we get read receipt (
acknowledgement) from other mail servers also?
Steps followed are:
Process 1: Using the function Module: SO_DOCUMENT_SEND_API1
Populating the fields:
    wa_receivers-receiver   = <External Email address>.
    wa_receivers-rec_type   = 'U'.
    wa_receivers-notif_read = 'X'.
Passing this structure to the Tables parameter: Receivers.
However the read receipt is not obtained.
Process 2: Using the class and the method:
cl_send_request_bcs=>create_recipient_from_soos1
The structure is getting populated as:
        recipient_soos1-recesc = 'U'.
        L_recipient_soos1-recextnam = < External email>
        l_recipient_soo1s-read      = 'X'.
Also passing:
I_requested_status = u2018Au2019.
I_status_mail = u2018Au2019.
CALL METHOD send_request->set_status_attributes
            EXPORTING
              i_requested_status = i_requested_status
              i_status_mail      = i_status_mail.
However the read receipt is not obtained.
Basis Settings:
SCOT->Settings->Confirmation of Receipts -> the first option is checked.
However still we are not getting the read receipt. The Delivery receipt is obtained but not the read-receipt
Thanks
Papiya

Hi,
Using the FM : SO_DOCUMENT_SEND_API1
When you pass values to
RECIEVERS
for Delivery reciept : notif_del = 'X'
for Read reciept : notif_ndel = 'X'
Try shceduling the report : RSCONN01 with default job name : SAPCONNECT ALL SEND
and check if this helps.
Cheers,
Remi

TS3276 Where is the read receipt button on the Mac Pro email?? I have NOT been able to find it?

Where is the Read Receipt button in the Mac Pro email?

There are no Read Receipts in Mail.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

Sales tax data in the posting term is not consistent (Real Estate Contract)

Hi Experts ,
getting the following error in while creating a "Rental Contract" through the T. Code RECN while trying to enter data in the " Conditions" tab page of the contract . Have made all the entries in in the Posting Parameters tab ( e.g. Payment Method ,House Bank ,House Bank Acct ,Bank Details ,Tax Type ,Tax Group) but still getting this error
ERROR MESSAGE
Sales tax data in the posting term is not consistent
Message no. RECD076
Diagnosis
The sales tax data in the posting term is inconsistent.
Procedure
Switch to maintenance of posting terms and correct all errors that are shown there.
Please help ....

Hi Ananda.
What did you do to resolved this problem?
Could you help?
Tks
Lucas

Sales tax data in the posting term is not consistent (Error in Real Estate)

The following error is occured while creating a real estate contract.
Sales tax data in the posting term is not consistent
Message no. RECD076
Diagnosis
The sales tax data in the posting term is inconsistent.
Procedure
Switch to maintenance of posting terms and correct all errors that are shown there.

Hi Ananda.
What did you do to resolved this problem?
Could you help?
Tks
Lucas

Safari on my iPad. I have an original iPad and since updating to the latest iOS safari forces me to restart the iPad about two to three times a day. Three problems: 1. It just blacks out. 2. The reading list does not delete after the story is read. 3. Ema

Since updating to latest iOS safari fails several times a day.
1. Just quits.
2. The items on the reading list will not delete after visited.
3. The screens goes grey when I go to email a reference.
Is the a solution other the restarting the iPad or is this something apple ought to fix?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

If you read a message twice on iMessage, does the time on the read receipt change?

i was messaging someone earlier on imessage and they read my message at about 3pm (i got a read receipt).. but when i checked my imessage on my laptop a few hours later the timestamp had changed to about 6pm, when the timestamp on my phone hadn't changed. does this mean the person i sent the message to read it twice?

Please remember that the Time Capsule's antennas are up at the top of the device, and have been designed to work best in that position.
In addition, the air flow pattern to help cool the internal electronics has been designed to work best with the Time Capsule in a upright position.
When I lay the Time Capsule down for 30 minutes, it is noticeably warmer. I can't tell if wireless is affected that much since my home is not that big.
You could try laying the Time Capsule down, but my recommendation would be that you do not do this. You may get a different opinion from another user, so stay tuned.

Wanted to block the Goods Receipt but not the Invoice Receipt

Hi
After the partial delivery of the Goods Receipt, i am manually setting the "Delivery completed" indicator in the PO. I dont want any future delivery against this PO. But it is allowing me to do a GR even though the Delivery Completed Indicator is set.
How can i stop all the future deliveries agains the PO. But at the same time, is should not block the IR. I tried this by locking the PO item. It is not allowing me to do any GR after locking the same. But at the same it is not allowing me to do the IR also.
Is there any way i can stop the GR, but do the IR for the purchase order ? Please clarify. Points assured.
Thanks
Venkat.

Hello,
If u maintain the latest GR date as a current date in the PO item level - delivery tab, then system will not allow to do further GR in future.
Latest Possible Goods Receipt
This is the latest acceptable date for goods receipt (GR).
If goods are received after this date, you will receive either a warning message or an error message, depending on the system setting.
If you receive an error message, you will not be able to post the GR.

The rendered records are not consistent with the range

After changing the range with record navigator to render the records,
if navigate to other page and go back,the rendered records will not be
consistent with the record range.
The issue can be reproduced as follows.
1.when select 1-10 range,the first 10 records are rendered.
2.select [Next 10 records] to render the 11-13 records.
3.change to other page and return to the original page.
It is found that the 11-13 records are rendered but the range is 1-10.
You can verify the issue by executing SampleMainPG.xml of the Tutorial.jpr for 11.5.10.2
from Jdeveloper after changing the SampleMainCO.java as below.
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (pageContext.getTransactionValue("link") != null)
OAAdvancedTableBean inner = (OAAdvancedTableBean)webBean.findChildRecursive("InnerTable");
inner.clearCache(pageContext);
inner.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
<==comment out these original source above.
OAAdvancedTableBean outer = (OAAdvancedTableBean)webBean.findChildRecursive("OuterTable");
outer.queryData(pageContext, false);
<==add the two rows of source above to get the latest query data.
you should to make the records of the table fwk_tbx_employees to be more than 10 just using the SQL script below.
(just need to change EMPLOYEE_ID at your will)
INSERT INTO fwk_tbx_employees (
EMPLOYEE_ID,
TITLE,
FIRST_NAME,
MIDDLE_NAMES,
LAST_NAME,
FULL_NAME,
EMAIL_ADDRESS,
MANAGER_ID,
POSITION_CODE,
SALARY,
START_DATE,
END_DATE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
ATTRIBUTE_CATEGORY,
ATTRIBUTE1,
ATTRIBUTE2,
ATTRIBUTE3,
ATTRIBUTE4,
ATTRIBUTE5,
ATTRIBUTE6,
ATTRIBUTE7,
ATTRIBUTE8,
ATTRIBUTE9,
ATTRIBUTE10,
ATTRIBUTE11,
ATTRIBUTE12,
ATTRIBUTE13,
ATTRIBUTE14,
ATTRIBUTE15 )
VALUES (
17,
'ichiro',
'yamada',
'ichiro yamada',
1,
0,
sysdate,
sysdate,
sysdate,
0,
sysdate,
0,
0,
it seems that if use the functions below,the issue can be workarounded.
But it is not clear whether there is any other impact from these functions.
innerTable1.clearCache(pageContext);
innerTable1.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
Could you please share your idea?
Thank you very much in advance.
Best regards,
Wang

FYI. I was able to do what I wanted by first going to page properties and removing unwanted fonts from appearance. Then edit the page, select all, change style to normal, then select the text where you want to use a different style and change style there. This gives consistent appearance with both browsers.

"Send Read Receipt" option not available in new 8.0.2 update?

Just updated my iPhone 5s to 8.0.2 and noticed the "Send Read Receipt" option is no longer available under Settings/Messages. Was this feature removed or moved somewhere else? I really don't want people to know when I've read their messages.

It's still there on my phone. Are you signed into iMessages? It's an iMessage only feature. It doesn't work (and never has) with SMS.

IMessage and Read Receipts

If I delete an iMessage without actually clicking on the message and opening it, will the other person see it as "delivered" or as read with the time I deleted it?

I found a potential solution here:
https://discussions.apple.com/thread/3758068?start=0&tstart=0
If you or the recipient has Messenger for Mac, uninstall it. I just did and the errors went away. I think what was happening was that because my Mac wasn't receiving the iMessage the error was generated for me and the other party. Odd that it suddenly started, but it seems to have worked.

The driver interface is not consistent

Using NIDAQmx v7.4
Why does the method DAQmxGetAIRngHigh fail on a simulated PCI-6143 device?
(Requested value is not supported value for this property.)
DAQmxResetAIRngHigh works and is called just before DAQmxGetAIRngHigh.
Why does the method DAQmxGetAIConvRate returns error on a simulated PCI-6110 device?
(Specified property is not supported by the device or is not applicable to the task.)
-cpede

Hi
The DAQmxGetAIRngHigh function works perfectly on a simulated device on my end. I did receive an error when running a modified CVI example because the default requested min and max values were -10V and +10V. Are you sure you weren't seeing this error instead? I. Make sure that you change the input limits to +-5V to avoid the error we're discussing.
The DAQmxGetAIConvRate fails on a PCI-6110 (and all S Series devices) because there is no convert clock. The S series boards have independent ADCs for each channel and therefore no convert clock.
Thanks
A Meister
NI DK

Image stabilization only works half the time and is not consistent

When I access image stabilization, apply, and render it. Only sometimes will it work. Help.

daveypr
It looks like you have come up with the answer to your particular situation. Great.
But, so that your experience can be of benefit to those finding your thread
a. What version of Premiere Elements are you using and on what computer operating system is it running?
b. How were you not applying the video stabilizer to the whole video clip in the first place? Or, are you suggesting
that others apply the video stabilizer to all the clips on the Timeline instead of one video clip that may really need that effect?
Thanks.
ATR

I have to use a wireless mouse with my MacBook Pro because the touchpad does not consistently work. Now, the wireless mouse is not consistently staying connected. Any ideas??

Why doesn't my Apple wireless remote remain connected? It is frequently giving me a "lost connection" signal and since the touch pad works intermittently it has become frustrating.

Hi at eeze,
If you are having issues with your wireless mouse, you may find the following article helpful:
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Regards,
- Brenden

IMessages: the read receipt is not consistent?

Similar Messages

Maybe you are looking for