IMessages work in two or more "i"s

Greattings, may be this is an old-news.
When you are using an apple id's Email in your Caller ID in many iphones or ipads, all of them will receive the same incoming message, and the Notifications will show on.
If you are using another Email, then only the Email which used to sent will receive the message, one or more device(s), but not all.

Hi Pohlan,
There is no way around this in DIAdem 10.2, and that likely won't change in the future.  The Data Portal holds all the channels that have been loaded into DIAdem application memory, and while the group structure from the original data files is preserved, the file hierarchy distinctions are not maintained.
What you can do is save selected channels/groups from the Data Portal.  So you can load, say, one group from file 1 and a second group from file 2, then you can save only group 1 to an external file A and then save only group 2 to an external file B.
Ask if you need more info on selective saving,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • HT3529 will imessaging work on two iphones using the same apple id

    will imessaging work on two iphones using the same apple id

    It will. If the two phones are used by two different people, however, you will need to implement some careful management of your iMessage settings to ensure that you don't each receive each-other's messages. It is a much safer option to use different Apple IDs for each individual.
    On iOS devices, you are able to use separate Apple IDs for iMessage and Facetime, iCloud, and the iTunes and App Stores.

  • Is there a way to work with two or more app at the same time on iPhone or iPad

    Is there a way to work with two or more app at the same time on iPhone or iPad?

    What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

  • Working with two or more tables in Numbers

    Working with two or more tables in Numbers
    It is possible to write numbers or names in Table 1 B-2, B-3, B-4, B-5, B-6 etc. and automatically copy in Table 2 only B-2, B-4, B-9, B23 etc.
    What do I need to do???
    Thanks for the help

    The table on the left is named "Source" and on the right "Destination":
    In the table "Destination" on the right:
    B2=Source :: B2
    select B2 and fill down

  • Does Time Machine work with two or more back up drives?

    I'm starting to get a collection of smaller external hard drives. Can I use two or more drives to backup a larger primary drive with TM?
    For instance, I have a 500 GB internal drive, and two 300 GB USB drives.

    Me too. I think that a concatenated RAID would work, but I can't make my RAID do what it's supposed to do. See: http://discussions.apple.com/thread.jspa?threadID=1516416&tstart=0.

  • How can I work with two o more webcams in a java aplication ????

    Hi Everyone, I have an aplication that capture a frame from a webcam but I just wanna work with 2 o more webcam in the same code. In the JMF registry detect only one. I don't know what to do to solve the problem. Who know some tip about conect 2 webcams with JMF, please help me...!!!!!

    I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
    That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
    You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
    70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
    Karl

  • IMovie 11 - Working with two or more music clips for a slideshow

    Hi,
    I want to create a slideshow with about 300 pictures of my last vacation that has background music. The pictures should fade on beats.
    What I did so far:
    - I picked some music, dragged it to the project
    - I opened the clip trimmer and marked the beats (by pressing m)
    - I dragged my pictures to the project
    iMovie did the trick and alligned the transition between the pictures to the beats. Nice. But after some time the music track is over and I need a new one. I dragged the next track to the project, added new beat marks but iM11 won't allign the pictures to the beat marks.
    So the question is: can you somehow "restart" the allignment process?
    Something else that remains unclear to me is how I'd manually switch between two music tracks. Say, I've got some pictures taken at the beach, then some taken in a church, ... Each picture sequence should have its own music.
    I don't know, maybe my workflow with the beatmarkers is all wrong but I've no idea how to do this kind of movie in a different (better) way.
    Best regards and thanks!
    PS: Maybe there's a good (video) tutorial (on Youtube) you could point me to. The ones I watched up to now were pretty basic and didn't tell the whole story.

    Hey,
    A good resource to go to is a website called iMovietutorialhelp.com:
    http://www.imovietutorialhelp.com
    It's a website where you can ask for a tutorial video to be made and it will be made for you. You also can just a basic question and it will be answered. It's a great resource for anything regarding iMovie. They for sure will be able to answer this and help you out.
    Check it out!

  • How two or more table used in smartforms

    Sir,
    Like to know how can i perform calculation in smartfrom if the fields is numeric and use two table, and also know about it is useful to use inner join or any other method in smartform for working with two or more tables simultaneously.
    plz, expalin with example

    hi
    you can use more than one table in smartform for that first you mention all the tables in the form interfaces and you have to mention the variables that you want to caliculate in the global definitions.
    For caliculation right click on ant text and in that we have flow logic option in that we can select which type of code you want to write and you have to create those inbetween two text fields where the values are there and the other one is where you want to display the result.
    in that code in input parameters we have to mention the variables which you want to use for caliculation and in output parameters mention the variables in which you want to store the result. And then we have to write the logic what ever we want.
    I hope this information will help you
    regards,
    Sreelatha Gullapalli

  • Itunes for two (or more)?

    Just got my Nano today, and want to know if I can share the previously installed itunes that my daughter has been using? When she plugs her ipod into the computer, it automatically downloads her changes from itunes. How does it work with two or more units? Let's face it, I don't want her music and she doesn't want mine. Thanks.

    OR you could each make separate playlists for each person and only have each individual playlists selected for each ipod. http://www.apple.com/support/ipod/tutorial/ipgettingstartedt2.html
    or for more on using manual mode http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html
    Another option would be in Windows every windows account gets it's own itunes library.

  • Pick activity is not working properly while creating two or more file adapt

    Hi,
    pick activity is not working properly while creating two or more file adapter for bpel process.
    bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
    can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
    Thanks
    sagar

    Does anybody tried this?
    Thanks
    sagar

  • Imessage not working between two iPhones

    We just got our son an Iphone 5C for christmas!  iMessage works just fine between his phone, his mother and brothers iPhones but not with my iPhone. He can send me an iMessage which I can recieve just fine but any reply I make to him is showing as a "green" (SMS) text. This is only happening with his phone and mine, any other texts I send to my wife or other son go thru as "blues". All phones are properly registered with apple with their own IDs and are all up to date with iOS 7.0.4
    Thoughts? Ideas? suggestions?
    Chris

    Hey ckeays!
    Here is an article that can help you troubleshoot this issue with iMessage:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Remove the extensions, redownload Safari, reload the extensions.
    http://www.apple.com/safari/download/
    And if you really want a better experience, use Firefox, tons more choices and possibilities there.
    Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
    https://addons.mozilla.org/en-US/firefox/addon/noscript/
    Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

  • OSX Mountain Lion 10.8.4: imessage works fine in safe mode, but not in "normal" mode. Any hints?

    My iMessages does not work in "normal" startup, but it works perfectly in safe mode.
    Any hints?
    I have the same problem on a MacBook Pro 17" and on a MacAir 13" mid 2011.
    On my MacMini, iMessage work's fine.
    I'm using same apple ID on all 3 devices.
    Before update to 10.8.4, i had no problems.
    FaceTime also stopped working after update to 10.8.4.
    Thanks in Advance,
    Lars O.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Can I use two or more seperate Apple ID accounts on Apple TV? Everyone in my family has a different account.

    Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.

    Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

Maybe you are looking for