Imessaging after upgrade to 5.1.1 are not coming from right user

We have 3 iphones and an ipad on the same itunes account. We recently upgraded all three phones to the 5.1.1 and now we are having a strange problem. When I imessage it says it is coming from my daughters phone???? It seems that all three phones are showing that all imessages are coming from 1 phone. This is not good. Do I have to uninstall and reinstall everything?

This happens when multiple phones are using iMessage with the same Apple ID. Each needs to use a unique Apple ID to keep your message identities separated. On two of the phones go to Settings>Messages>Receive At, tap the Apple ID at the top, sign out, sign back in using a different ID.

Similar Messages

After upgrading to Yosemite, I don't receive email from Gmail users

Using a MacBook Pro, 2.8 GHz Intel Core 2 Duo, 8 GB RAM, 1 TB SSD internal hard drive. OSX v10.10.2
My primary email address is an .mac/.me/.icloud email address.
Recently upgraded to Yosemite. After doing so, I am having trouble receiving emails from Gmail users (I am not having trouble sending emails from my Gmail account, as many people have).
I asked 8 of my friends with Gmail email addresses to email me a test. I received 4 of these emails immediately after they were sent, the other 4 email took anywhere from 4 to 48 hours for me to receive.
Anyone else have this problem, and if so, any solutions? Any help is greatly appreciated.

There have been various posts about delayed Gmail e-mail delivery to iCloud e-mail addresses, but so far, no solutions. Gmail uses a nonstandard form of IMAP e-mails, which may be causing the problem.

What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

We have an openerp server with webclient, after upgrade of firefox some icons are not oppening submenus as it used to be, while they are still working on internet explorer 8

We have an ERP application(openerp), where the web client was working very fine.
After one of the upgrades of firefox, some of the icons on the web page that should open a sub-page for selection of items in the main page are not working any more. We click on them, yet no response
I donwloaded the fidler and it record any request sent from the PC when clicking those icons.
I tired internet explorer 8 and the icons are working, so it is not a server side problem

Hi,
There're some "known issuees" with some updates, as described in the following KB:
http://support.microsoft.com/kb/2962872/en-us
I would suggest install the update below which might solve the IE crash issue
http://support.microsoft.com/kb/2977629/en-us
Yolanda Zhu
TechNet Community Support

After upgrading my ipad2 my apps are not working

I have recently upgraded my IPAD 2 after a long time.. but,after upgrade apps are not working!!!

Na!!! I restored factory settings.. now not able to copy aaps from itunes to IPAD

After upgrade to mavericks usb devices are not recognised?

After upgrade from Mountain Lion 10.8.2 to Mavericks external USB speakers do not work and HP Inkjet USB printer is not recognised in control panel.
Pls advise on fault finding solutions
Best regards
Sergey

Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

After Upgrade to 3.1 Packages are not displaying correctly.

Upgraded to 3.1 today and now when I try to view the doclib package body under HOME\SQL WORKSHOP\Object Browser the htp.p code from within the package is displayed in large font above the edit window. If I scroll down in the edit window the code stops where the htp.p commands start.
I tried adjusting my browser font settings, deleted cookies, etc. Nothing seems to work. Strange.
I'm running IE version 6.0. Any hints would be helpful. Thanks in advance. ~Elizabeth

I started using TOAD to make code changes to the packages. It has something to do with IE, I can view the code just fine in Firefox. I just wanted to close this thread. Elizabeth

After downloading many images, my thumbnails are not coming up cleanly

I'm working on a PowerBook with an external drive for my target storage drive, and I'm finding that, after loading many images, when I click on the thumbnails to see the full size image, the full size image does not come up cleanly. Specifically, I'll see the top of the image clearly, then the bottom two-thirds is simply a block of color (not gray, mind you, but a color that is part of the palate of the image itself). Eventually, it all comes in, but it seems like it might be dragging because of the quantity of images I have stored on the hard drive. I can't seem to figure out why this is going this way.
Does anyone have any thoughts on how to correct this? I'm worried that I'm heading for some sort of crash.
Thanks!
dw
PowerBook Mac OS X (10.4.6) G5 Tower

Hello, dw
Quote: "when I click on the thumbnails to see the full size image, the full size image does not come up cleanly. Specifically, I'll see the top of the image clearly, then the bottom two-thirds is simply a block of color (not gray, mind you, but a color that is part of the palate of the image itself)."
A few things I would do first for starters:
1. Format the card in the camera a few time consecutively
2. Verify/Repair Disk on the external drive using Disk Utility
3. Repair Disk Permissions in Safe Mode
4. Keep about a 15-20% headroom on all drives
5. Rebuild the Aperture Library
6. Empty the Trash
love & peace,
victor

Iweb with Lion: Umlaute after ftp-upload on linux-Server are not correct - but worked with Leopard!

Hi from Germany. I used iweb 3.04 and OS X 10.6+ and everything worked fine on different websites, including German Umlaute ä, ö, ü, ß.
After upgrading to Lion all Umlaute are not correct spelled (strange letters) after ftp-upload on a linux-server (which is the same as before). Before upload these Umlaute are spelled correctly, but not after upload.
Trials were a) upload htaccess file b) use older iWeb 3.03 c) asking server administrator (answer: "use ae, oe, ue instead"), but nothing worked.
Any ideas or help?
Thank you very much, and excuse my english
Peter

The problem lies in the uploading of the files or the server itself. If the umlautes looked good on the server before then we have to think it's the uploading process. Try using the free FTP client Cyberduck to upload your site folder to your server. Then check to see if the rendering is correct.
What's the URL of your site so we can examine it first hand?

After Upgrade to Yosemite, all apps are slow.

I upgraded to Yosemite and all applications are slow. ( as e.g.. starting to type in this box give me beachball for 2 seconds initially) A big difference in speed from Mavericks to Yosemite. Opening system preferences takes 3 seconds to load, and clicking on Users & Groups takes 25 seconds to open.
I do not have fire vault enabled. I did a safe boot and some apps did appear to open faster. Also did a repair disk and rebooted. No change. When Safari is open it takes 5 seconds to open a new window.   I ran EtreCheck and the report is as follows;
Thanks for any help;( After pasting the EtreCheck text file, I clicked on this box to add the Thanks... , it took 2-3 seconds for the beach ball to stop spinning.)
Problem description:
After upgrading to Yosemite, all apps are slow,
EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 11:46:01 AM MDT
Hardware Information: ℹ️
iMac (24-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:23:55
Disk Information: ℹ️
WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 639.28 GB (130.48 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
Burr-Brown from TI USB Audio CODEC
Canon MP480 series
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
MyBookMovies (disk2s2) /Volumes/MyBookMovies : 2 TB (549.58 GB free)
LaCie LaCie Hard Drive USB 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 795.40 GB (322.99 GB free)
Time Machine Airdisk (disk1s3) /Volumes/Time Machine Airdisk : 100.77 GB (55.52 GB free)
EXCHANGE (disk1s4) /Volumes/EXCHANGE : 100.09 GB (45.35 GB free)
ALCOR Generic USB Hub
Prolific Technology Inc. USB-Serial Controller
Prolific Technology Inc. USB-Serial Controller
Hewlett-Packard hp LaserJet 1012
Apple Computer, Inc. IR Receiver
Prolific Technology Inc. USB-Serial Controller D
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
/Library/Extensions
[not loaded] foo.tun (1.0) Support
/System/Library/Extensions
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[loaded] com.prolific.driver.PL2303 (1.5.1 - SDK 10.6) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.notify.plist Support
Launch Agents: ℹ️
[running] com.abbott.mal.launchclient.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[loaded] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[running] com.abbott.mal.malserver.plist Support
[loaded] com.adobe.fpsaud.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.vladalexa.MagicPrefs.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
AppCleaner Helper Application (/Applications/AppCleaner.app/Contents/Library/LoginItems/AppCleaner Helper.app)
Messages Application (/Applications/Messages.app)
MagicPrefs UNKNOWN (missing value)
Calendar ApplicationHidden (/Applications/Calendar.app)
Mail ApplicationHidden (/Applications/Mail.app)
Contacts ApplicationHidden (/Applications/Contacts.app)
PowerboxInjector Application (/Applications/PowerboxInjector.app)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
1Password
AdBlock
ClickToFlash (Disabled)
Print Plus (Disabled)
ClickToPlugin (Disabled)
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
GPGPreferences Support
Growl Support
MacFUSE (Tuxera) Support
MagicPrefs Support
Paragon NTFS for Mac ® OS X Support
Perian Support
QuickTime Player X Preferences Support
WDQuickView Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 795.40 GB
Total number of backups: 29
Oldest backup: 2014-10-08 20:15:48 +0000
Last backup: 2014-10-20 17:32:33 +0000
Size of backup disk: Excellent
Backup size 795.40 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      10% WindowServer
      5% syncdefaultsd
      4% Safari
      1% AppleSpell
      0% com.apple.iCloudHelper
Top Processes by Memory: ℹ️
266 MB mds_stores
258 MB Safari
180 MB Finder
137 MB WindowServer
136 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
3.93 GB Free RAM
2.97 GB Active RAM
443 MB Inactive RAM
978 MB Wired RAM
1.82 GB Page-ins
0 B Page-outs

You could do that, but when setting up your new iMac it is a much better idea to transfer only your existing User Accounts. In other words when Setup Assistant appears, de-select "Applications", "Computer and Network Settings" and "Other files and folders". That way you will eliminate the possibility of reinstalling potentially incompatible software from your existing Mac or its TM backup. It's best to create new printer queues and preferences anyway.
Your venerable HP 1012 will probably work without any difficulty but if you need its driver download it here. If it gives you trouble try OS X's generic PostScript driver.
After configuring your user account, install original versions of your essential software from their original sources. In other words if you installed them via download from the developer's website, download them again. You might need license keys so gather them. Obviously the Mac App Store makes things easy since anything you obtain from there is already linked to your Apple ID and is easily reinstalled by going to your Purchases page.
Don't reinstall things like AppCleaner, CleanMyMac, Western Digital "Smartware" or any of that junk. You don't need it. MacFUSE is outdated. Research Prolific Technology for potential updates for their serial controller. The one you have may work, or not, but you should re-download its driver.
Consider abandoning Microsoft altogether and migrating to better solutions such as Pages, Numbers, and Keynote. They are all free with a purchase of a new Mac and are far more integrated with OS X than anything Microsoft will ever be able to accomplish.
The Burr-Brown USB device is unknown to me, so research TI's website for support if you need it.
If your essential software was distributed on optical media, you can use OS X's "DVD or CD sharing" feature to remotely mount the older iMac's optical drive so that you can install its software. It will work as though that drive were physically installed on your new Mac. Having said that, anything that was distributed on optical media is highly likely to have been outdated a long time ago.
If your essential software is old, orphaned, no longer supported, or is no longer available, meaning you have the only viable copy, the only option is to transfer it from the TM backup or older Mac. In that case be very cognizant of the likelihood for incompatibility, and have a plan for uninstalling it should it cause adverse effects. Creating a new TM backup is the way to do that. A new external HD dedicated to the new Mac is a cheap investment. When you are certain you no longer require the older Mac's TM backup, you can erase it and use it as an additional, redundant TM backup or "clone" repository – whichever you decide is best for your backup needs.

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Couldn't sign in to FaceTime and iMessage after upgrade to iOS7..

I couldn't sign in to FaceTime and iMessage after upgrade to ios7 ... Please help !!

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

TS2998 After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin).

After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?

The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

After upgrade to ios7.0 , I can not open my phone

iphone 4s ------after upgrade to ios 7.0 , can not open my iphone , because it need me to enter the open iphone passcode , but I did not set up open passcode before? strange ?? now can not use my iphone , urgent ! how to solve it . how to open iphone ? (once set up passcode when use ios6.0 but cancel it long time ago. I bought it in USA. and before upgrade , it works well ) . pls kindly help !!

Hi unlac,
Thanks for using Apple Support Communities. This article has steps to use when you are unable to unlock your iPhone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Ari

Imessaging after upgrade to 5.1.1 are not coming from right user

Similar Messages

Maybe you are looking for