Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

Similar Messages

  • TS3899 Our CEO has an iPhone and an iPad. Everytime he is at a specific airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malwar

    Our CEO has an iPhone and an iPad. Everytime he is at the Baltimore Washington Airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malware?
    Both devices are on Verizons 4G LTE network. Both devices do have some of the same APPS installed. Can this be a case of him connecting to a rogue wifi network of a hacker that may have installed malicious code on his devices when he connected? That would explain why only his devices have the same exact issue only at BWI airport.

    Something similar I've experienced. I was once having to use a AT&T hotspot and the iPad simply refused to access my mail via the mail app. But if I used safari I could get it.  So the internet was working, but my supposition is that something with the hotspot's firewall messes with mail exchange.
    next time your boss is at BWI, do you guys have a web interface? (for example if I wanted to access my work mail I could get them to set it up via the mail app and exchange, or I could go to a certain web address and access my mail that way via safari)
    He could try using safari and the web interface if you have it.
    If it's something in the hotspot's firewall I doubt it's anything that can be changed.

  • Why can i send and recieve messages on my home wifi but nit when i am  connected to other wifi connections, why can i send and recieve messages on my home wifi but nit when i am connected to other wifi connections

    plz help i need to know why i cannot send or recieve messages on other wifi connections

    What networks do not work?
    It could be that the ports used are being blocked. See:
    Using FaceTime and iMessage behind a firewall
    Try using Google's  DNS with the other networks. When connect to those networks, go to Settings>wifi and change the DSN to 8.8.8.8

  • Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
    Cirrus realitypod mac audio driver
    MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
    Realtek Drivers

  • The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    Just re-set the App -
    Open the App
    Hold down the power button until the slider appears
    Hold down the home button (Don't use the slider) Until the App Closes
    You might lose your place, but shouldnt be too hard to find it again...

  • Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me? Regards Eddie Johnson

    Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

    Eddie,
    There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there.

  • Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

    Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

    Hi Bev076,
    I would try these ideas first:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that doesn't resolve the situation, I would suggest reporting it:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Take care,
    - Ari

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • Can't restore bookmarks. "Unable to process the backup file." I have tried every solution I can find online.

    I am running W7 and FF 14.01. My admin account FF works fine. My working account has the problems. In the past I have been able to get the bookmarks back but not this time.
    The bookmarks were there yesterday morning and gone in the afternoon. Nothing changed between the AM and PM to my knowledge. I tried every solution I could find online but still no bookmarks.

    You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. Once reset, copy and overwrite the '''bookmarkbackups''' from the previous [http://kb.mozillazine.org/Profile_folder Profile Folder] into the newly reset profile folder after exiting Firefox. To do that type '''%appdata%''' in the Windows '''Run''' box (Windows key + R) and browse to the '''Mozilla\Firefox\Profiles''' folder. The '''*.default''' is the old profile, and the one with the random numbers is the newly reset profile. Once overwritten you can try to start Firefox in the reset profile and restore the backup. If this doesn't help you can also try to right-click the bookmarkbackups folder in the old profile > '''Properties''' > [http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions Previous Versions] > '''Copy''' and then overwrite the copied versions into the newly reset profile folder.
    (To revert to the previous profile you were using, close the new profile (i.e. exit Firefox), start Firefox and choose the '''Default User''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers), or the former profile, as the case may be). If the reset is okay, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data until deleted.
    [https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

  • Editing tools and search option stopped working after IOS Update

    Hi All,
    Since the last IOS & Adobe Reader Update I have been unable to edit or search within existing PDF using the Adobe Reader iPad App.   I have noticed the document now shows as protected on the Iphone Adobe Reader App but does not give me any option to unprotect it.  Please bear in mind I have been editing this document for over 6 months now and the document shows my previous annotations.
    Any ideas on how to resolve this issue? 
    Many thanks
    S

    Hi Sue,
    Yes, we received your PDF document via email.  Thank you!
    I can confirm the following:
    Your PDF document is not encrypted or locked by password.
    This is a defect in Adobe Reader for iOS version 11.6.4 (or possibly all 11.6.x versions) for the particular type of PDF documents like yours. (The problem does not happen with all PDF documents.) The tools/areas that are affected by the defect: Search, text selection, text markup annotations (highlight, strikeout, and underline).  However, you can still add other types of annotations, namely sticky notes, free text, and freehand drawing, to the PDF document.
    The defect has already been fixed in our internal build for a future release.  (I was able to add highlight/strikeout/underline and search text in your PDF document.) Unfortunately, I am not able to speculate on the next release date.
    Sorry for the inconvenience. We hope that you switch back to Adobe Reader for iOS once the defect is fixed. 
    Thank you for reporting the problem!

  • Safari won't work after iOS update

    My Safari 6.0.3 won't respond after installing this weeks iOS update.

    Do you mean this OS X update to 10.8.3? iOS, for iPads/iPhones, etc hasn't been updated for two or three weeks.
    For the Safari problem, have you tried resetting it? Launch Safari and from the Safari Menu>Reset Safari. tick the options and then 'reset'. Any change?
    You could try re-applying the OS X update using the combo:
    http://support.apple.com/kb/DL1640
    or re-install Safari with the standalone installer:
    http://www.macupdate.com/app/mac/15675/apple-safari

  • Caller ID not working after IOS update, any ideas?

    iPhone 4S, did the update yesterday, everything else seems to be working except caller id.  Suggestions?

    Java Test
    Java
    Java (2)
    I've played with java preference settings and it makes no difference.
    Have you checked the brower preferences to make sure the plug-in is enabled? It appears maybe you have.

  • HT4623 After ios7 update can't send or receive emails.  Have turned off and on, hVe rebooted, have deleted account and  adding as new.  Now what?

    Upgraded to ios7 on iPad 2. Now can't send or receive mail (outlook).
    I tried starting and restarting. I tried rebooting.  I tried deleting mail account and adding in again.  I
    Now what do I do?

    I think I have solved this problem on m iPad2 by:
    1.  Reinstalling my email account.
    2.  Changing the settings on my PC to stop it from deleting my email from the server before my iPad could load them.
    My PC uses Windows Air Mail.   I made no known changes to my PC from the time I was running iOS6 to the installation of iOS7 ???   MS did come out with several updates this week?? 
    3.  In the same time frame when I was scrolling through web pages the Control Bar popped up every third stroke.  It is very easy to change the setting of the Wy Fi setting from On to Off while deleting the unwanted Control Panel without any indication.  This means that the Wy Fi must be constantly checked to make sure that is ON???
    The three problems at the same time have made this the worst mess to fix in 12 years of internet use.   The fix has lasted for about 8 hours at this point, Tomorrow will tell.

Maybe you are looking for

  • BB messenger and Internet

    Hi i need urgent help becasue when my phone connection is on GPRS i cannot connect to the internet and sending message to BB contacts doesnt send. However when connection is on EDGE i can connect to the internet and also BB messenger messeges go thru

  • How do I revert to Snow Leopard from 10.7.4?

    I have a Time Machine back-up of all my files on an external HD but, unfortunately, done AFTER installing 10.7.4 (which is a REAL BUMMER!). If I reformat my MacBook Pro and do a clean install of 10.6.8, will it allow me to recuperate all my mail and

  • Inserting button in table

    I need insert buttons in html table to display them well aligned. I have a idea : I created html in region. The html contain <tab ...></tab> Is possible insert button in the table?

  • Performance problem with select from _DIFF view

    Hi, we have a versioned table with more then one million records. We use the DBMS_WM.SetDiffVersions procedure and select from DIFF view to get data differences between two workspaces. The problem is that the select from the DIFF view is very slow. I

  • SGD-AD "LDAP error code 49"

    Dear all, I saw the following error in the server-login log file: 2007/07/24 15:15:03.098 (pid 2698) server/login/moreinfo #1185261303098 Loaded class com.sco.tta.server.login.LdapLoginAuthority: { LDAPRoot=.../_ldapmulti/forest/ accountEnabledChecke