Img nodes

Hi Solution Manager Experts,
We are using Solution Manager for SAP Configuration & Testing .
The IMG nodes are created at Business Process Level in the CONFIGURATION TAB.
Can the IMG nodes that are created for one Business Process, be re-used /copied to an another
Business Process in Solution Manager.?? .
Thanks in advance your answers.
Thanks and Regards,
Umesh Karane.
SAP SD Consultant.

Umesh,
You can do this at both business process level or at another project level in Sol man.
In both the cases you have to take 'projects' in the drop down which exists on the right hand side in blueprinting phase (SOURCE).This shall take you to the project as suggested by you and then will give you an option to copy the blueprint structure of the project.This structure then will get copied onto your project and the IMG nodes shall also get copied in the config phase of your project.
Write back in case the problem persists...it shouldnt!
Mukhraj

Similar Messages

Missing IMG node for Scenario definition

We are currently configuring FIORI PR approval and the IMG node for Scenario Definition under Task Gateway Service is missing. Components installed as well as the IMG screenshot is below. Any thoughts on what would be missing is appreciated.
Tags edited by: Michael Appleby

FYI.
I see you use old UI components which were released in May 2013.
Important Note: Please use new UI with new SAP Fiori Launchpad
New UI components have UI extension points and work with new SAP Fiori Launchpad.
Please find correct components based on your Backend version.
SAP Fiori - Add-on quick reference for transactional apps
Regards, Masa
SAP Customer Experience Group - CEG

CRM IMG nodes are missing in SOLAR01 - configuration Tab

hi Experts
i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab.
the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in solar01, these nodes are not available for the selection.
Does any body faced these kind of situation.
Please help with the solution
Thanks
Sol man

Hi,
Make sure that those nodes are selected in the IMG project scope. This can be seen at SPRO_ADMIN for the IMG project, under tab "scope".
If the nodes are not selected, select them and generate the project IMG.
best regards,
Fabricius

Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?

Hi,
Is T code OOHAP_BASIC in Performanace management system(PMS) available in IMG Node ?
please revert . I am not able to find the same in IMG.
Thanks
Srikant .

SPRO->Personnel Management->Personnel Development->Appraisal Systems->Edit Appraisals Catalog

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

Translate documentation of custom IMG nodes

Hi,
I have created some custom nodes in the IMG. Now I need to translate the documentation.
I am aware of transaction SE63 and that you can choose IMG documentation from Abap Objects --> Long Texts.
But then its asking for an Object Name. I though I could give the Document Name that I assigned to the activity but that does not seem to be right.
How do I find out the Object Name? Or is there any other way to translate the IMG documentation?
Stefan

1 )to change long text documentation for IMG .
SE63 translation / abap objects / labels (2nd line )
the object name begins by SIMG search SIMG* with F4
2) to change/create label of a node in a language you cand modify/add an entry of table CUS_IMGACT .

IS Utilities - Reference IMG Node

Hi Friends
I am new to IS Utilities . My system ECC6.0 has been set to Utilities . In the Easy access I am able to access area Menu SISU. However I am unable to see any nodes pertaining to Utlities . I request you to guide me , any activations are required.
Thanks in advance
warm regards
narasimha

Do you mean you are not seeing ISU nodes for "Regional Structure", "Scheduling" etc when you get to the SISU easy access menu?
Your description says IMG whereas your message says easy access menu. These two are different, IMG is the configuration and easy access menu is the transactional aspect of ISU. If you want to access ISU configuration, you just go through regular SPRO -->SAP Utilities.

SPRO Customer IMG Nodes Missing

Hi all, i created some nodes in SIMGH for some maintenaces Ztables. But last week our customer did an update or applied some patches, and now the links in SPRO/IMG are missing, the entries that i created are in the tables as TFM18 or CUS_IMGACH, but the links are missing.
Could you please help me!!!!
thnks in advanced.
BR!

thanks you!! and in this cases, do you know how restore them??

Missing img node

Hi ,
I ahv eto implement LWF for Haryana, but In SPRO LWF node is not displayed in indian payroll module, what could be the reason for that
Regards,
Rahul

If you are using ECC 6 then LWF configuration comes in Other Statutory and Non statutory deductions tab in Payroll:India.
or Use tables V_T7INU1,V_T7INU3 and V_T7INU5.
Mohan

Adding custom nodes in SAP reference IMG and accessing them using SM30

I was able to successfully add an IMG node and few activities under the node (for our custom configuration table data entry) in SAP reference IMG. (using transaction SIMGH).
However, when I execute transaction SM30, enter the name of the custom table and hit the button customizing, it does not take me to the appropriate node in IMG. It simply doesn't do anything.
For any SAP table or view, this works like a charm (wherever SAP has configured the nodes). But when we create custom nodes for custom tables, it does not work.
What steps am I missing?
I will really appreciate any help you can provide.
Jitendra Mehta

Hi Sree:
I assume you have either created your view maintenance for Z tables or you have created transaction attaching calling SM30 for view maintenance of your Z table.
You may go in transaction SIMGH and in SAP reference IMG, create a main node (wherever your end client wants you to put it) and under this node, you can create sub-node for each view maintenance with a suitable description of sub-node.
Once you save and activate, you are done.
Then you can execute transaction SPRO and you should see your custom nodes wherever you attached them in the tree.
I hope I understood your problem and have answered it.
If not, please let me know and we can discuss it further.
Thanks.
Jitendra Mehta

New node in IMG

Dear Guru's,
I ahve a requirement where i need to add a new node to the IMG and assign a bunch of tcodes. Can any on advice me how to.
Regards
Karthik

Hi Karthik.
I would like to suggest a couple of references,
[SAP HELP Library - Standard Reference for Change Project IMG - Nodes|http://help.sap.com/saphelp_nw04/helpdata/en/7e/c81c8752c511d182c50000e829fbfe/content.htm]
[SAP HELP Library - Standard Reference for IMG Enhancement - Node Operations|http://help.sap.com/saphelp_nw04/helpdata/en/c2/f30e5861d411d395df00a0c930dcc1/content.htm]
[SAP HELP Library - Standard Reference for Create Maintenance Objects - Transaction Settings|http://help.sap.com/saphelp_nw04/helpdata/en/13/54e34150cb11d395cf00a0c930dcc1/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Logical Component & IMG

Dear All,
I am using a logical component for global configuration. When selecting this LC in a implementation project all the required IMG nodes are showing up. But when using the same logical component for template project a certain node is not showing up?
I will really appreciate the answer.
Sincerely.

Hi Andreas,
Thanks for your reply. Please let me know how can I change the menu configuration?
Sincerely,

Link to IMG activity in documentation

Hi all,
within a documentation e.g. for data elements it is possible to create links to different object types (documentation of report, data elements, function modules etc.). It is also possible to define a link to IMG activities or more precisely to Implementation Guide chapters (SIMG).
Doing this will lead the user to the node within the IMG structure after clicking this link. Usually this works fine. But now in my case I would like to link to IMG activity SIMG_CFMENUOLMEOMF4 to lead the user to the special point Purchasing -> Purchase Order -> Define Screen Layout at Document Level. But unfortunately does the activity also links to the screen layout definition for RFQ/Quotation.
That means, when the user clicks the link, than the activity for RFQ/Quotation will be displayed. But I want SAP to navigate to the PO tree. The activities have different IDs, but are linked to the same document. I guess, that this is the reason for this behaviour.
Does anybody know a way to navigate directly to the mentioned activity within the PO tree?
Any help is very appreciated.
Kind regards
Rudi

Thanks David,
I don't want to enhance the IMG structure. I just want to insert a link to the IMG node in my documentation.
Example:
Transaction SE61 -> Document class = General text -> Name = ZZ_TEST -> Create
Within the editor choose Insert -> Link -> Document class = Implementation Guide chapter (SIMG) -> Chapter = SIMG_CFMENUOLMEOMF4 -> Name in document = PO screen layout
Back in the editor choose Document -> Screen output
When the output appears click the link -> SAP will navigate to the RFQ subtree in customizing, but I need that SAP navigates to the PO subtree.
Any ideas?
Kind regards
Rudi

Few fundamental Question- Project IMG and BBPs

Dear All
I have few basic question and will appreciate answers ,. points will be awarded as well.
1. Is there any difference between Enterprise IMG and Project IMG ( or is there any thing such as Enterprise IMG exists in Solman).
2. Can scope of project IMG be changed once it has been creted and saved. ( if yes then Steps plz)
3.How to create BBP nodes in Solar02 based on Project IMG.
Regards

Hi Nayab,
1. In simple terms, Project IMG is a sub-set of Enterprise IMG, based on what you scope in. It can also be a mirror image of Enterprise IMG (meaning - all entries can be included in Project IMG). If you go to SPRO transaction in the given satellite system (R/3, CRM ...), you'll find different icons in front of each IMG node, under Project IMG - that is to let you 'document' your activities. Enterprise IMG is the core or reference IMG that SAP provides out of the box.
2. Yes. it can be changed. But, I am unable to list steps here
3. By BBP nodes in SOLAR02, what did you mean ? I have heard the term BPP (Business Process Procedure) or BB (Business Blueprint). Can you elaborate please.
Also, the whole topic of Project IMG Vs. Enterprise IMG is about the satellite system involved and not on SolMan's own configuration.
Regards,
Srini

Change Maintain Organization Views configurations in IMG

Hi,
We want to use the same organization view for all GRC components. Therefore I want to change the settings in the IMG Node u2018Governance, Risk and Complianceu2019 u2013 u2018Shared Master Data Settingsu2019 u2013 u2018Maintain Organization Viewsu2019 u2013 u2018Maintain Organization Views configurationsu2019. Currently the tabe is filled as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
003 / GRC-RM / Risk Hierarchy / Risk Hierarchy / Default view
I have recently created these entries myself since the original table was empty (I copied these settings from another environment). This results in all my RM risks currently connected to organizations from the standard hierarchy. However I cannot change them, since the Risk Hierarchy does not contain anything.
I would like to allign all three components and configure the table as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-RM / Standard Hierarchy / Standard Hierarchy / Default view
However when I try to delete the row with '003' and create the italic one, GRC won´t allow me to save it, since I cannot change the default view for application component Risk Management.
Does anyone have a suggestion how to solve this problem?
Thanks a lot,
Joris

Hi Roberto,
To solve the problem, please follow the following steps (in the exact order):
- Go to IMG node "Activate Applicactions in Client"
- Disable the applications where you want to change the organization view
- Go to IMG node "Maintain Organization Views"
- Adjust the view as required (it is now possible to change the default view for the disabled components)
- Go back to the IMG Node "Activate Applications in Client"
- Enable the applications again
- Check the workflow post installation again (there were some problems at my instance, although I´m not sure whether that has been caused by these steps).
Please let me know if this solves the problem.
Joris van de Veerdonk

Img nodes

Similar Messages

Maybe you are looking for