IMG Note for a Config Change

Hello,
I am very new to SAP. Could someone guide me as to how I can write an IMG note for a customizing change.
I just need to add some documentation in that IMG note for a change that I am doing.
I would really appreciate it if someone can help me here.
Thanks in advance
Mridula

Hello Mridula,
Unfortunately, you cannot add a note to an IMG node anymore. Only the existing SAP nodes being delivered are permitted.
If you are going to have IMG Activities beneath this node, then you can goto the Documentation tab of each IMG Activity definition (Right click on activity -> Technical details) and maintain a documentation for each one of them.
If there are no activities, then you really do not require a documentation for the node alone, which practically does no steps, right?
Best Regards,
Rekha

Similar Messages

ACS will not save the config changes to reports

I have configured a very old ACS appliance, 4.1. At this time this is what I we have to use. The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config changes that are being made.
I'm hoping that someone may have an idea of what accounting command I am using or if this older version has some changes that need to be done as the config/aaa lines I use today and work on newer version work. I was under the impression that this line "aaa accounting exec default start-stop group tacacs+" would send every command to the tacacs server?
aaa new-model
aaa authentication login default group tacacs+
aaa authorization config-commands
aaa authorization exec default group tacacs+ none
aaa authorization commands 0 default group tacacs+ none
aaa authorization commands 1 default group tacacs+ none
aaa authorization commands 2 default group tacacs+ none
aaa authorization commands 7 default group tacacs+ none
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
any ideas would be3 appreciated. thanks for reading
Yvon

Hi martijn,
Are there some custom fields in this list or some duplicate columns? Please have a check.
For more information about the possible reasons and solutions, see
http://social.technet.microsoft.com/Forums/en-US/sharepointcustomizationprevious/thread/ae946f73-3126-41ad-833b-25e4cc2b7723#e22af3fe-8203-45c4-8d19-e18041a048e2
http://social.technet.microsoft.com/Forums/en-US/sharepointgenerallegacy/thread/59895a6b-7f61-431f-a762-e3fd9d81fe34
http://social.technet.microsoft.com/Forums/en/sharepointcustomizationprevious/thread/eba4cd7e-498a-465f-adea-decae44d7a8c
Regards,
Kelly Chen

SAP Note for XD99 : Data changed but Output screen show error message

This is regarding the XD99.. Mass data update.
I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
Is there any Sap Note for this.
Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
Moderator message: please have a look in the Service Marketplace yourself.
Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

Hi there, gwinslo. You have come to the right place.
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
This is not a cure but will make it easier if Firefox locks up.

Logs for cluster config change

Hi,
I've noticed some rather odd behavior on my cluster configuration. Before, in our production, I noticed who ever did the
orginal config put the admin server as part of a cluster. I'm looking at it now a month later and see that the admin is
not part of the cluster.
Is there any part in any of the logs where it might show that someone removed the admin server from the cluster?
Any advice would be appreciated.
Thanks..

btw, this is for Weblogic 8.1 .. sp4

WCL Tracking Scenario (Search List) not updated after config change

Dear Users,
Initially I assigned 3 User profiles and Web Interface Transaction to my user ID under the transaction : Event Management -> Event Messages, Status Queries and Web Interface -> Web Interface -> Assign User profile and Web Interface transactions to Users
When I login to WCL using my user ID, I was able to see these three tracking scenarios in my Search page drop down.
Now I go back to config and add new user profiles and web interface transactions to the same user id.
But when I login to WCL, the search page still remains the same( the three old tracking scenarios are there, new ones not reflected) !!!
Can this be any setting in the internet explorer which is not allowing to refresh? I have tried deleting cookies etc. But no change!!
Please HELP with your expert advise.
Thanks in advance.
Regards,
Rimjhim

Can you share the solution.

Report is not getting refreshed after changing prompts once again?

HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
Harshad

The workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda

When the about:config setting for swipe are changed to allow changing tabs with swipe it does not repond and performs the default back and forward in browsing history action on the selected window instead of switching tabs. How do I get it to work?

In about:config, the values I changed to for the preference name browser.gesture.swipe.left was Browser:PrevTab and for browser.gesture.swipe.right was Browser:NextTab.
I have the latest synaptics touch pad on my laptop and it supports three touch swipe on windows pcs and on firefox. The about:config setting seem to be specific for MACs and so does not responds to windows changes.

Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support

BAPI_SALESORDER_CREATEFROMDAT2 is not carrying out pricing for variant config materials

Hi Guys
I need to create a BAPI to create sales orders coming in through a web service from an external system, for normal materials all works well, but for variant config materials the pricing is not happening, like the way it does when I manually create an order, I don't want to manually pass the pricing condition in BAPICOND as I want the BAPI to dynamically determine the conditions from the access sequence.
While debugging VA01 I found that the control goes to the 'PRICING' function module twice, ones for the main material , and next for all its config materials, the second time it calls the 'PRICING' fm with pricing type 'O'. Here it selects the price for all the variant materials and loads into an internal table vkomv and displays in VA01 the variant materials that we select while creating the order, but in the case of the BAPI call, the control is going only to the 'PRICING' fm call for the header.
I have passed 'V' in the application parameter and the variant material in the varcond parameter of the BAPICOND structure.
Any idea what I might be missing ??
Thanks
Sameer

Solved by reading the following OSS notes
562124 Configuration change via
549563 BAPI: Filling the configuration structures
567348 – Fill configuration via BAPI

SAP BI System Copy with only Config changes, Not Data

Hi BASIS,
I have a requirement from a client to build a system landscape stratagy for their SAP BI system.
We have DEV - QA - PRD systems for SAP BI (7.0 SP 16)
Both DEV and QA are completely out of sync with PRD. We are doing development tasks directly on PRD. Now we have decided to re-sync the DEV & QA systems with PRD.
'System copy with Data' will be easier to implement. But our PRD DB size is nearly 3TB. The client is not ready to pay for the extra/temp. disk space for DEV and QA sync. ( We are on DB2).
Now, we have only one option left. Capture all Config changes from PRD and transport them back to DEV & QA. This is a tedious task and cause many inconsistencies.
Would anyone have any other ideas to bring the systems in sync with less time involved and less resources.
I am a SAP BI person. So dont know much about BASIS tasks. Please help me with any links of best practises or SAP notes.
Cheers

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

Config view for VLAN config is not supported

Hi folks,
I have the following error when I try to view the VLAN config from RME->ConfigManagement->Version Tree.
"Config view for VLAN config is not supported"
I didn't found any information over the RME and Campus documentation.
Anybody know what kind of error I'm issuing
Thanks and Regards.
Leonardo

Hi Pablo,
The VLAN.dat file cannot be used to be deployed via CiscoWorks, but it can be done manually:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1311740
The problem with viewing the VLAN.dat contents in the config viewer or change audit reports is also mentioned in the link below:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/chgaud.html#wp1060886
Look for the "Details" row and there you will see the following:
VLAN configurations cannot be compared because they are in binary format. In this case, the Details link will not be available and will be shown as NA.
Hope this helps!

Config change-certain plans for specific personal sub-area

Hi,
I have a requirement like, currently there are 3 health plans configured in the system for the employees of the company. It is open for all the personal areas and sub-areas.
Now there is a requirement to change the config as follows:-
The plans (2 health plans and 1 dental plan) should be available only for sunnyvale employees. How do I make these changes so that the plans are available only for employees of sunnyvale personal sub-area. (Personal area=California and personal sub-area= sunnyvale)
Need your guidance at the earliest. Kindly help.
Thanks

Thank you for your reply.
Let me explain again
Currently, there are 3 health plans configured in the system as follows
Plan Type: Medical & Dental
They are a total of 3 plans which are right now available to all the employees of California.
I need to make the following changes w.r.t to the following details
Personal area = California
Personal subarea=Sunnyvale
Emp group=full, temp, intern, retired
Emp subgroup=full, part
I need the above mentioned 3 plans to be available to only the employees of sunnyvale and not the entire california.
I don't know where to go and make the changes so that the plans are available only for the employees of sunnyvale (And not for all the employees of California)
Hope this explains the scenario.
Thank you

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Change in start date of tax depreciation not for posting in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

IMG Note for a Config Change

Similar Messages

Maybe you are looking for